Before commit 156460811d ("soc: fsl: qe: Change GPIO driver to a
proper platform driver") qe_add_gpiochips() was walking the device
tree to find all nodes with compatible "fsl,mpc8323-qe-pario-bank".
After that commit the discovery is handled by the platform core,
therefore it is necessary to call of_platform_default_populate() on
the par_io node.
Fixes: 156460811d ("soc: fsl: qe: Change GPIO driver to a proper platform driver")
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/a1db12ef75bf881dd5fba893a37db0c8517eca1b.1785414349.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Commit 814cba835e ("bpf, x86: Fix trampoline stack size for 128-bit
arguments") changed the x86 trampoline to compute the number of
registers from arg_size for every argument, which removed the last user
of BTF_FMODEL_STRUCT_ARG. No other architecture or verifier code looks
at the flag, so remove the macro and the code in __get_type_fmodel_flags()
which sets it.
Keep BTF_FMODEL_SIGNED_ARG at BIT(1) rather than renumbering it to
BIT(0), so BIT(0) is available for a future flag.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260803052726.2821447-1-yonghong.song@linux.dev
The last mentions of this driver on local Linux and telco support forums
date back to 2011. This does not prove that no users remain, but the
likelihood is too low to justify continuing to carry the driver in the
kernel.
The maintainer agreed that the driver should be removed and noted that it
is simple enough to build as an external module if a user resurfaces [1].
Remove the driver along with its Kconfig, defconfig, build and MAINTAINERS
entries.
[1] https://lore.kernel.org/linux-serial/20260218152330.GI26902@suse.cz/
Assisted-by: Codex:GPT-5.6
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20260803091938.259944-1-qingfang.deng@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions have the same requirements and are also required to execute
the same code. Prevent duplication by merging them to the single function
and document the additional relaxation of `Init::__init` on both the merged
function and the safety requirement of `Init`.
The existing `__pinned_init` function is deprecated and kept for
compatibility for existing users. For `cfg(kernel)`, it is soft-deprecated
for now and will be removed when all users are migrated.
Link: https://patch.msgid.link/20260729-merge-init-v2-2-26adf47109e7@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
Add a new SoC data structure for Tegra264 platforms and register the
nvidia,tegra264-sdhci compatible string. Configure the supported
features and tap delay values for the Tegra264 SDHCI controller.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add the compatible string for the SDHCI block found on the Tegra264 SoC.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add a new SoC data structure for Tegra238 platforms and register the
nvidia,tegra238-sdhci compatible string. Configure the supported
features and tap delay values for the Tegra238 SDHCI controller.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add the compatible string for the SDHCI block found on the Tegra238 SoC.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Starting with LLVM 22, `clang_getTypeDeclaration()` may return a forward
declaration instead of the type definition. This made `bindgen` generate
opaque types [1][2], which in turn made us fail with e.g.
error[E0609]: no field `__bindgen_anon_1` on type `bindings::kernel_param`
--> rust/kernel/module_param.rs:78:46
|
78 | let container = unsafe { &*((*param).__bindgen_anon_1.arg.cast::<SetOnce<T>>()) };
| ^^^^^^^^^^^^^^^^ unknown field
|
= note: available field is: `_address`
This was fixed in `bindgen` 0.72.1 [3].
In order to clarify what is going on and avoid confusion [4][5], add
a warning to `rust_is_available.sh` about it when the versions match,
similar to past warnings like the one removed in:
commit ae64324ad5 ("rust: rust_is_available: remove warning for `bindgen` < 0.69.5 && libclang >= 19.1")
In addition, even if the versions match, check if the issue appears to
not reproduce with the given binaries, to avoid a warning in such a case.
Finally, include tests.
[ Nathan, in parallel, updated the instructions of the LLVM+Rust
kernel.org toolchains [6] so that `--version` is not passed to
`cargo` for `bindgen`, and thus the latest `bindgen` is installed
by default, which should help to avoid some of these situations.
Thanks!
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-bindgen/issues/3264 [1]
Link: https://github.com/Rust-for-Linux/linux/issues/353 [2] # "Missing fields in nested class with LLVM 22."
Link: https://github.com/rust-lang/rust-bindgen/pull/3278 [3]
Reported-by: Burak Emir <burak.emir@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1247 [4]
Link: https://lore.kernel.org/rust-for-linux/CABwQupNfMAJOGqRM9ke6tj4f53dCCsBDKU7Vp+zf8mwk7bqt8Q@mail.gmail.com/ [5]
Link: https://mirrors.edge.kernel.org/pub/tools/llvm/rust/ [6]
Tested-by: Burak Emir <burak.emir@gmail.com>
Link: https://patch.msgid.link/20260719120514.159914-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace static asserts on MIPS firmware structures offsets and sizes
with more compact macros that are already used for similar checks on
common firmware interface structures.
Reviewed-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Link: https://patch.msgid.link/20260729-fwif-checks-updates-v1-2-af65e9606a7e@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The same macros are redefined in three places, so move them to a common
file to reduce duplication and make it easier to reuse them.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Co-developed-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Link: https://patch.msgid.link/20260729-fwif-checks-updates-v1-1-af65e9606a7e@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Add gpio-line-names properties to the BeagleY-AI .dts so that gpios
can be requested by the documented name on the 40-pin header (and a
few other board functions).
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Acked-by: Robert Nelson <robertcnelson@gmail.com>
Link: https://patch.msgid.link/20260728-arm-dts-beagleyai-gpio-info-v1-2-783ec90d54da@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Ethernet boot requires CPSW node to be present starting from R5 SPL stage.
Add "bootph-all" property in CPSW MAC's eFuse node "cpsw_mac_syscon" to
enable this node during SPL stage along with later boot stage so that CPSW
port will get static MAC address.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I2C0 is used by the 22-pin CSI1/DSI0 connector and I2C2 is used by the
22-pin CSI0 connector.
Add the missing pinmux definition for the I2C2, and setup both nodes but
keep them disabled. They will be enabled by the camera and display
overlays.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Link: https://patch.msgid.link/20260602-beagley-cameras-v3-1-fe6ae35b7eda@ideasonboard.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The value loaded into r0 in copy_and_flush() represents the number of
8-byte words processed between cache synchronization operations.
The existing comment refers to cache line size, which can make it appear
that the value is a cache line size in bytes rather than a loop count.
Clarify the comment to explain that the loop processes 8 words (64 bytes)
per cache synchronization iteration, and that increasing the value would
skip cache maintenance for intermediate cache lines.
This is a comment-only change with no functional impact.
Signed-off-by: Nikhil Kumar Singh <nikhilks@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260706082708.43918-1-nikhilks@linux.ibm.com
Prolific PL256X devices are multi-port USB-to-UART controllers,
including the PL2533, PL2543 and PL2565 variants.
These devices use vendor requests that differ from those used by the
existing TYPE_HX and TYPE_HXN devices. They also require a separate UART
reset request and use a port-specific register for configuring flow
control.
Add a new TYPE_MP device type and select the appropriate vendor requests,
reset operation and flow-control register for PL256X devices. Store the
USB interface number so that requests can be directed to the corresponding
UART port.
Detect the supported PL256X variants using bcdDevice before issuing any
legacy vendor requests, as PL256X devices do not accept those requests.
PL256X devices support baud rates up to 24 Mbps and do not use divisor
encoding.
Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
Link: https://lore.kernel.org/all/CAAZvQQ6O4p35Xs2hVYaoJxD4D7U0YonsdweuPh6W8RQVhvoUNw@mail.gmail.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC
pointer and is available as a caller-saved register [0].
Both call_do_irq() and call_do_softirq() use inline assembly to call
functions with stack switching, but fail to list r2 in their clobber
lists. This causes the compiler to assume r2 is preserved across these
calls, leading to register corruption when the called functions
(__do_irq and __do_softirq) clobber r2.
As a result of this kernel crash during interrupt handling is seen and
the kernel fails to boot:
BUG: Unable to handle kernel data access on write at 0xc000000404697638
Faulting instruction address: 0xc0000000000181ec
Oops: Kernel access of bad area, sig: 11 [#1]
NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0
With older GCC, the compiler would conservatively allocate
callee-saved registers (like r31) for values spanning function calls,
accidentally avoiding the bug:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f8 ff e1 fb std r31,-8(r1)
f0 ff c1 fb std r30,-16(r1)
2d 03 10 06 pla r31,53297316
...
3d e8 ff 4b bl c0000000000165ac <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 4d e9 ld r10,40(r13)
40 00 21 38 addi r1,r1,64
2a f9 aa 7f stdx r29,r10,r31
With newer GCC 14, the compiler uses r2 for such values, exposing the
missing clobber specification:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f0 ff c1 fb std r30,-16(r1)
f8 ff e1 fb std r31,-8(r1)
29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs>
...
85 dc ff 4b bl c000000000015ee0 <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 2d e9 ld r9,40(r13)
30 00 21 38 addi r1,r1,48
2a 11 c9 7f stdx r30,r9,r2
Fix this by adding r2 to the clobber list for both call_do_irq() and
call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled.
[0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html
Fixes: 7e3a68be42 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/10fc2cda485cd22e209a31d786bed1984bdf3982.1785732393.git.skb99@linux.ibm.com
With CONFIG_PPC_KERNEL_PCREL enabled, calling bpf_check_timed_may_goto()
using a bl instruction results in a link-time failure:
arch/powerpc/net/bpf_timed_may_goto.o: in function `arch_bpf_timed_may_goto':
(.text+0x28): call to `bpf_check_timed_may_goto' lacks nop, can't restore toc
Use CFUNC() macro instead of direct 'bl' to properly annotate the call
to bpf_check_timed_may_goto(). On PCREL builds, CFUNC() expands to
'bl name@notoc', informing the linker that TOC restoration is not
needed, avoiding the "lacks nop, can't restore toc" linker error.
Fixes: b55b6b9ad7 ("powerpc64/bpf: Add powerpc64 JIT support for timed may_goto")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/f75e5aa911afb984a94c0e85d58b1be5fb428548.1785387718.git.skb99@linux.ibm.com
With CONFIG_PPC_KERNEL_PCREL enabled, build breaks with below error:
CC mm/dmapool.o
CC fs/readdir.o
arch/powerpc/net/bpf_jit_comp64.c: In function 'bpf_jit_emit_func_call_rel':
arch/powerpc/net/bpf_jit_comp64.c:475:13: error: unused variable 'ret' [-Werror=unused-variable]
475 | int ret;
| ^~~
Commit b55b6b9ad7 ("powerpc64/bpf: Add powerpc64 JIT support for timed may_goto")
introduced "ret" at function scope, but it is only used within its
respective conditional blocks. Same holds true for reladdr. Move both
variable declarations to the scopes where they are actually used:
"reladdr" to the CONFIG_PPC_KERNEL_PCREL block and "ret" to the non-PCREL
else block.
Fixes: b55b6b9ad7 ("powerpc64/bpf: Add powerpc64 JIT support for timed may_goto")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e8e582fb425db165a72f00e3337cdf4c6ae383ad.1785387718.git.skb99@linux.ibm.com
After enabling GENERIC_ENTRY on PowerPC, syscall_enter_from_user_mode()
returns -1 as a sentinel to signal that seccomp or ptrace has intercepted
the syscall and already set a return value via syscall_set_return_value().
system_call_exception() was not handling this sentinel, and since -1UL
is >= NR_syscalls, the code fell into the out-of-range path and returned
-ENOSYS, overwriting the errno already placed in regs->gpr[3].
The naive fix of checking r0 == -1L before the NR_syscalls bounds check
is ambiguous: a user legitimately calling syscall(-1) also produces r0 ==
-1L, and a tracer intercepting such a call would have its injected return
value silently discarded.
Fix this by introducing a thread flag that is set whenever
syscall_set_return_value() explicitly updates the return value. In
system_call_exception(), check and clear this flag before dispatching
the syscall, and return the preset value directly when it is present.
This ensures that an explicitly supplied return value always suppresses
syscall execution, regardless of the syscall number.
This handles all seccomp actions correctly:
- SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE (no tracer), SECCOMP_RET_USER_NOTIF:
all call syscall_set_return_value(), flag is set, injected value returned.
- SECCOMP_RET_TRAP, SECCOMP_RET_KILL: call syscall_rollback() and deliver
a signal; flag is not set, but the process is dying so the return value
is irrelevant.
The fix covers both ppc32 and ppc64 with no #ifdefs.
Fixes: bee25f97ad ("powerpc: Enable GENERIC_ENTRY feature")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/ajpp-_XnbF3UTM_E@kunlun.suse.cz/
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260731081521.1852133-1-mkchauras@gmail.com
On pseries LPAR systems, watchdog timers configured from userspace can
remain active after a kernel panic. When a panic triggers kdump, the
crashing kernel jumps directly to the kdump kernel without stopping
active watchdogs. As a result, the watchdogs remain active after the
kdump kernel starts.
If dump capture takes longer than the watchdog timeout, PHYP resets the
LPAR before the dump is fully captured, causing dump capture to fail.
Fix this by issuing the `H_WATCHDOG` hcall during the crash shutdown
sequence to stop all active watchdogs before booting the kdump kernel.
Cc: stable@vger.kernel.org
Fixes: 69472ffa65 ("watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers")
Reported-by: Mahesh Kumar G <mahe657@linux.ibm.com>
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727053416.276317-4-sourabhjain@linux.ibm.com
The pseries watchdog initialization registers the pseries-wdt platform
device using platform_device_register_simple(), but currently ignores
its return value.
Check the returned pointer for errors, log a descriptive error message
when registration fails, and propagate the failure code to the caller.
This avoids silently ignoring platform device registration failures.
Cc: stable@vger.kernel.org
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727053416.276317-3-sourabhjain@linux.ibm.com
The H_WATCHDOG input and output definitions are currently local to the
pseries watchdog driver. The next patch in this series also needs these
definitions to issue H_WATCHDOG hypercalls outside the watchdog driver.
Move the H_WATCHDOG definitions to a new common header,
asm/papr-watchdog.h, so they can be shared without duplicating the
PAPR watchdog definitions.
No functional changes.
Cc: stable@vger.kernel.org
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727053416.276317-2-sourabhjain@linux.ibm.com
On IBM POWER systems, newer processor generations can operate in
compatibility modes corresponding to earlier generations. This becomes
relevant for nested virtualization, where nested KVM guests may need to
run with a specific processor compatibility level.
Currently, when running a nested KVM guest (L2) inside a Power11 pSeries
logical partition (L1) booted in Power10 compatibility mode, the guest
fails to boot while setting 'arch_compat'. This happens because the CPU
class is derived from the hardware PVR (via mfspr()), which reflects the
physical processor generation (Power11), rather than the effective
compatibility mode (Power10).
As a result, userspace may request a Power11 arch_compat for the L2
guest. However, the L1 partition, running in Power10 compatibility, has
only negotiated support up to Power10 with the Power Hypervisor (L0).
When H_GUEST_SET_STATE is invoked with a Power11 Logical PVR, the
hypervisor rejects the request, leading to a late guest boot failure:
KVM-NESTEDv2: couldn't set guest wide elements
[..KVM reg dump..]
This situation should be detected earlier and rejected by KVM. Without
proper validation, if userspace ignores the error, the guest may continue
to boot in Power11 raw mode on a Power10 compatibility host, which should
not be allowed.
Introduce a validation mechanism that detects unsupported arch_compat
values early in the guest initialization path. When an unsupported
arch_compat is requested (e.g., Power11 on a Power10 compatibility mode
host), kvmppc_set_arch_compat() uses cpu_has_feature(CPU_FTR_P11_PVR) to
detect the mismatch and sets arch_compat to PVR_ARCH_INVALID (0xffffffff).
This sentinel value is architecturally safe: PAPR specifies that valid
logical PVR values must have 0x0f as the first byte, ensuring 0xffffffff
lies permanently outside the specification-defined range. Setting this
value triggers kvmppc_sanity_check() to mark the vCPU as invalid by
setting vcpu->arch.sane to false. On the next vCPU run, kvmppc_vcpu_run_hv()
checks this flag and returns -EINVAL, preventing the guest from running
with an invalid processor compatibility configuration.
With this, when a Power11 arch_compat is requested on a Power10
compatibility mode host, the guest fails early during boot with:
error: kvm run failed Invalid argument
This provides a much clearer failure mode compared to the previous
behavior where the guest could boot in Power11 raw mode (if userspace
ignored the error) or fail late during H_GUEST_SET_STATE.
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Acked-by: Gautam Menghani <gautam@linux.ibm.com>
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260714175432.86388-1-amachhiw@linux.ibm.com
When working on a new features that reuses the existing pad in the
superblock, I noticed that mounting such a file system on an old kernel
logs a rather confusing warning:
XFS (vdc): Metadir superblock padding fields must be zero.
This is because we only validate the various feature fields in v5
superblocks after the common superblock validation helper is called.
Fix this by calling the feature validation first.
Fixes: eca383fcd6 ("xfs: refactor superblock verifiers")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
smp_muxed_ipi_message_pass() calls smp_ops->cause_ipi() without
checking whether it has been set.
On platforms using muxed IPI (e.g. powernv/pseries), smp_ops->cause_ipi
is initialized to NULL in the static smp_ops and only assigned during
the platform smp_probe() handler. If the IPI subsystem fails to
initialize -- for example when xive_init_ipis() fails and
xive_smp_probe() returns an error -- the probe handler returns early
and cause_ipi is never set. Any subsequent IPI send (e.g.
arch_smp_send_reschedule()) would dereference the NULL pointer.
Add a NULL check to avoid the crash in that situation.
Fixes: 23d72bfd8f ("powerpc: Consolidate ipi message mux and demux")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727104215.184786-6-gouhao@uniontech.com
xive_smp_probe() currently assigns smp_ops->cause_ipi = xive_cause_ipi
before calling xive_init_ipis() and xive_setup_cpu_ipi(). If either
call fails, the platform probe handler returns early but cause_ipi
remains pointing to xive_cause_ipi -- which accesses per-cpu IPI data
(xc->ipi_data) that was never properly initialized, leading to
a WARN and a crash.
Move the cause_ipi assignment to after both calls succeed, so that
smp_ops->cause_ipi is only set when the IPI subsystem is fully
initialized.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727104215.184786-5-gouhao@uniontech.com
When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails),
the error path frees the global xive_ipis array. However,
xive_smp_probe() previously ignored this failure and proceeded to
call xive_setup_cpu_ipi(), which dereferences the already-freed
xive_ipis pointer -- a use-after-free.
Now that xive_smp_probe() returns int (previous patch), propagate
the error from xive_init_ipis() and xive_setup_cpu_ipi() through
xive_smp_probe(). Check the return value in both pnv_smp_probe()
and pSeries_smp_probe() so that IPI setup is aborted cleanly on
failure, avoiding the use-after-free.
Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Fixes: cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727104215.184786-4-gouhao@uniontech.com
xive_smp_probe() calls xive_init_ipis() which can fail, but its
return value is currently ignored. Change xive_smp_probe() to
return int so that errors can be propagated to callers.
This is a preparatory patch for the next one.
No functional change yet; the return value is always 0 at this point.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727104215.184786-3-gouhao@uniontech.com
__GFP_NOFAIL should not be used in new code [1]. xive_init_ipis()
allocates the xive_ipis array with __GFP_NOFAIL, which makes the
subsequent NULL check unreachable dead code.
Remove __GFP_NOFAIL so the allocation can fail, and make all xive_ipis
access paths NULL-safe:
- Return XIVE_BAD_IRQ from xive_ipi_cpu_to_irq() when xive_ipis is NULL.
- Set xive_ipis to NULL after kfree() in the error path to prevent
use-after-free.
- Guard xive_setup_cpu_ipi() and xive_cleanup_cpu_ipi() against
xive_ipi_irq == XIVE_BAD_IRQ to avoid dereferencing an uninitialized
or already-freed xive_ipis array.
No functional change when allocation succeeds.
Link: https://lore.kernel.org/all/20260725202632.dcb325658896a470df91cf57@linux-foundation.org/ [1]
Fixes: 7dcc37b3ef ("powerpc/xive: Map one IPI interrupt per node")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Cédric Le Goater <clg@kaod.org>
Suggested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727104215.184786-2-gouhao@uniontech.com
All other fields have comments describing them, add one for this field
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Allocating the new bio for a split from the same pool as the original
one can deadlock under memory pressure as the origin bio could be the
last one from the mempool.
Add a separate pool for splitting GC write bios to avoid this.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xlog_recover_dquot_commit_pass2() validates the recovered dquot with
xfs_dqblk_verify() and, on failure, sets error = -EFSCORRUPTED and jumps
to out_release. But out_release unconditionally returns 0, so the
corruption error is discarded: the caller xlog_recover_items_pass2()
sees success, log recovery proceeds as if the dquot were valid, and the
corrupt quota buffer can be written back to disk.
Fixes: 9c235dfc3d ("xfs: dquot recovery does not validate the recovered dquot")
Cc: stable@vger.kernel.org # v6.8
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly.
Fixes: bda250dbaf ("xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent")
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM complained that this function ignores runtime errors being
returned by xrep_iunlink_store_*. Rework the function signature so that
we can return runtime errors to abort the repair.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If we find a rogue free inode and decide to reinsert it into the
unlinked list, we need to set the prev pointer to NULLAGINO so that the
incore list gets updated.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If an allocated inode shows up in the unlinked list, we need to get it
completely off the list. Set the corrected next/prev pointers such that
the inode will not look like it should be on an unlinked list at all.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
