Customer reported a problem with mounting CIFS shares where the server
hostname was 2 chars long. Turned out that the CIFS client wasn't
able to resolve NetBIOS names shorter than 3 chars.
Fix this by allowing a minimum of one character per hostname in
dns_query().
Reproducer with samba server:
# 'ab' and 'srv' hotnames resolve to same ip address
$ ssh srv ln -s 'msdfs:\\ab\\share' /home/shares/dfs/link1
$ mount.cifs //srv/dfs/link1 /mnt -o ... [EINVAL]
Reported-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Frank Sorenson <sorenson@redhat.com>
Link: https://patch.msgid.link/20260722-net-dns_resolver-v1-1-c3385898ccf9@manguebit.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a driver's .get_fec_stats() handler is called and the driver
supports FEC histogram stats, the driver supplies the histogram bin
ranges via a pointer. This pointer is assigned while under the netdev
ops lock in fec_prepare_data(), but the actual data is only read after
the lock is released; so this allows the driver to change the ranges
(e.g. from another .get_fec_stats() call) while the current call chain
is reading them in fec_fill_reply().
Fix this by adding an ethtool core-owned buffer, ranges_buf, to struct
ethtool_fec_hist. Drivers whose ranges are built dynamically (currently
just mlx5) fill ranges_buf and then point the existing ranges pointer at
it, giving ethtool a consistent copy that stays valid after the netdev
ops lock is dropped and later in fec_fill_reply(). Drivers whose ranges
are compile-time constants (bnxt, netdevsim) are unaffected by the
potential race and keep setting the existing ranges pointer to their
constant array, without making copies.
Fixes: cc2f081299 ("ethtool: add FEC bins histogram report")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723041342.39238-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On every VF/SF vport enable, esw_acl_egress_ofld_setup() allocates an
egress ACL flow table and a fwd_grp whenever the device supports
egress_acl_forward_to_vport. The only consumer of that group is the
active/passive fwd2vport rule installed when two representor netdevs
are bonded - a path that almost never fires. As a result, hosts with
many VFs/SFs pay a per-vport flow table and flow group cost for a
feature most ports never use.
Defer the flow table and fwd_grp creation to the moment they are
actually needed, when mlx5e_rep_esw_bond_netevent() drives
mlx5_esw_acl_egress_vport_bond() for the passive vport:
- esw_acl_egress_ofld_setup() now returns early unless
prio_tag_required is set. When prio_tag_required is set the
flow table is still allocated eagerly for the VLAN pop rule, and
its size is grown by one when fwd2vport is supported so the lazy
fwd_grp can later be added without re-creating the table. Only
the VLAN group is built up-front.
- A new helper, esw_acl_egress_ofld_fwd2vport_setup(), allocates
the egress ACL flow table (size 1) and the fwd_grp on demand,
and rolls back the flow table if group creation fails and the
helper had just allocated it. Existing cleanup paths
(esw_acl_egress_ofld_cleanup() -> *_groups_destroy() /
*_table_destroy()) already tolerate NULL fields, so vport
disable continues to free everything that was actually
allocated.
- mlx5_esw_acl_egress_vport_bond() calls the helper for the
passive vport before installing the fwd2vport rule. The active
vport does not need the flow table on its own: with a NULL
fwd_dest, esw_acl_egress_ofld_rules_create() is a no-op unless
prio_tag_required is set, in which case the eager path already
built the table.
mlx5_esw_acl_egress_vport_bond() and mlx5_esw_acl_egress_vport_unbond()
now take esw->state_lock for the duration of the operation, because
they may mutate vport->egress.acl, which is also written by the vport
enable/disable path under the same lock.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260723070427.1861502-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_shampo_update_ipv{4,6}_tcp_hdr() runs only from the
gro_count > 1 path in mlx5e_shampo_flush_skb(). HW-GRO flushes the
current session on a CWR packet and delivers it as a single-segment
skb via napi_gro_receive(), so the aggregated (gro_count > 1) skb
never carries a CWR-set TCP header.
This patch drops the unreachable branch. Discussion context:
https://lore.kernel.org/all/8b610e49-ff64-497e-8712-588b2228df02@nvidia.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260723072829.1864366-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The _once rate-limiting in slow_pci_heuristic() is unnecessary because
this function only runs during probe.
Worse, it interacts poorly with dynamic debug: if the first probe
happens before dynamic debug is enabled for this callsite, the _once
flag is permanently consumed and the message becomes unreachable without
reloading the module.
Additionally, only the first probed device values were printable in case
of multiple devices.
Replace with mlx5_core_dbg() which allows enabling the print via dynamic
debug at any time and observing it on the next probe.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260723081743.1868357-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rpmsg client drivers are allowed to invoke rproc_report_crash() on their
grandparent when they determine that the otherwise seemingly healthy
remoteproc has entered a functionally broken state.
In the crash handling path qcom_q6v5_request_stop() is invoked, which is
based on the current rproc state whether to request a graceful shutdown.
But the current rproc `state` will be RPROC_CRASHED regardless of where
the crash handler was initiated from, and empirical data shows that
unless the firmware is taking part of the shutdown the system state is
often left such that it's not possible to start the subsystem again.
Use the `running` state in the q6v5 driver to make the decision instead,
as this does represent the actual state of the firmware.
This makes it possible to reliably trigger a restart from client
drivers.
Fixes: 3cc889eb83 ("remoteproc: qcom: q6v5: Avoid setting smem bit in case of crash shutdown")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260723-q6v5-host-side-crash-v1-1-23bd53db90a7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
find_in_level() gets a dentry folio with f2fs_find_data_folio() before
calling find_in_block(). If find_in_block() returns an error, the
function stores the error in res_folio and breaks out of the loop without
dropping the dentry folio.
This leaks the folio reference on the find_in_block() error path. Drop
the dentry folio before returning the error to the caller.
Fixes: 7ad08a58bf ("f2fs: Handle casefolding with Encryption")
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
rproc_del() is subjected to the reference counted shutdown path, as such
a remoteproc with more than one reference will be left running as its
resources are released underneath it.
Refactor the shutdown path such that the reference count value is
ignored when called from rproc_del().
Assisted-by: OpenCode:GPT-5.5
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Pradnya Dahiwale <pradnya.dahiwale@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260723-rproc-rmmod-not-crashing-v1-3-546dfd5de0e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There's no synchronization between rproc_crash_handler_work() and
rproc_del(), as such it's possible for a driver to be removed while
crash-handler work is scheduled, or even executing - resulting in
use-after-free issues.
To avoid this the scheduled work need to be cancelled and synchronized
against before the removal proceeds.
In order to ensure that this doesn't race with the reporting, and
thereby scheduling new work, a "deleting" flag is introduced. This is
similar to the RPROC_DELETE state that was introduced to ensure that
"start" didn't race with rproc_del(), but the existing mechanism can not
be used as it's valid to call rproc_report_crash() in atomic context -
and the "state" is protected by a mutex.
In the event that work is cancelled the pm_stay_awake() is left
unbalanced and need to be unrolled.
The blocking and cancelling of crash-handler work prior to the actual
rproc_shutdown() call does have the explicit side-effect that crashes
resulting from the shutdown process will not enter the crash-handling
path, and as such will not generate devcoredumps etc. Due to the
existing mutual exclusion between these code paths there's no concrete
reduction in functionality, but further work would be needed to handle
this case.
Assisted-by: OpenCode:GPT-5.5
Fixes: 8afd519c34 ("remoteproc: add rproc_report_crash function to notify rproc crashes")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Pradnya Dahiwale <pradnya.dahiwale@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260723-rproc-rmmod-not-crashing-v1-2-546dfd5de0e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
rproc_shutdown() rejects a remoteproc in RPROC_CRASHED state, and
rproc_del() ignores that error. The result of these two decisions is
that a user cannot stop a remoteproc that with recovery disabled that
has entered a crash state, and removal of an associated remoteproc
driver will release resources without first stopping the remoteproc.
Allow rproc_shutdown() to stop crashed processors. Propagate the crash
state to subdevice teardown, to allow subdevices to dismantle things
appropriately.
Assisted-by: OpenCode:GPT-5.5
Fixes: 5e6a0e0527 ("remoteproc: core: Move state checking to remoteproc_core")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260723-rproc-rmmod-not-crashing-v1-1-546dfd5de0e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In rtase_start_xmit(), when the head buffer DMA mapping fails after
rtase_xmit_frags() has mapped all fragments, the error path clears
the fragment descriptors with rtase_tx_clear_range(), which frees
the skb through the last-frag slot and accounts tx_dropped. Control
then falls through to the common error label, which frees the same
skb a second time and counts it again.
Return right after clearing the fragments when the skb owns frags;
the no-frag case still drops through and frees the head skb once.
Fixes: d6e882b89f ("rtase: Implement .ndo_start_xmit function")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20260721023836.6691-1-luyun_611@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kfree() safely handles NULL pointers, so the explicit NULL check
before calling kfree() is unnecessary.
This issue was reported by ifnullfree.cocci.
Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
Link: https://lore.kernel.org/r/20260726064228.248199-1-mdshahid03@gmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Commit 5cb53743e1 ("selftests: net: Add a test for BIG TCP in UDP
tunnels") used iptables match comment, which was missed from the CI
kernel config. Add the missing config option.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://patch.msgid.link/20260723140241.132120-1-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
====================
docs: netdev: a couple of updates
Explicitly covers a couple of relevant spots currently left out in the
dark. Likely the first one was too obvious to ever spell out loud and
the latter too new.
Both cases are increasingly relevant, at least to me.
Keep the update in the netdev subsystem, as others may have slightly
different preferences.
====================
Link: https://patch.msgid.link/cover.1784884817.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The official documentation has not captured yet the current impact of
AI-generated reviews on the patch process.
Explicitly state the status quo and expectations.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/83360de7addb13a3b5f4d5e722148f248fdb2ae0.1784884817.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Off-list pings are very bad, but unfortunately too common. Explicitly
state that, so that at least LLMs could learn it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/38b75373f813354ad0ee8bfde12ae5a42e9a11b6.1784884817.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmpjQRYACgkQ1w0aZmrP
KyGqXQ//UZtajUv4Lbd1rddf5T4sFuLPiYk1ujL7jFw/ltyJWa712U/Jy8kLI7ft
KMW4DSGxZ3fM+xgcT18AQwEj+7vItshNCM2RF7HSDXixYDOctkURhML3m+CVGDPv
ykZDGvGa1cwmE23vvrLAmuqh+OBs+4Q7pQsyR+SuLSxEvZeGi5OfXcxAnM8KWq0A
ddZAWe3DiX04vG7fmPFDw0JYw3m0JktKwJxj9Wn0Q83EffUDQCD/DtQKaMQp1oEM
+3L9M/XHoGAW9/YlpYOE5DZORT+jHiLsYHpkOBBJ3JVzHzjLK9GDI0Vi/bZJUG5h
bIJZdnj0nIHRIR3wgr1hicDWlgfcSh62i6HDLlXmzPvVa/Yk4Tgxof5LzfM+1KxL
nHJ4D3Dp7C0Slm7nEkBea6euc2z4csQ4PNEpF0WIKu04eWxUjBqVnISPaeHJfeB+
23F/7J9at682vOuxxQgCCRmuU84fCOBm7kGNY9cte/iN433D36JeFbQfcK24w2Ce
OfihBFBbA7nfZM0w8speaUa/BDH88gL2Y0DjA8RkIhjZJKrjUkqVoJJv07eMz8b1
IwpJGVWracSjDUot8RUIFuG4wcHE63SvZGdcbdeGfW7EnZe5alK/EgrMZLpwE1em
fmRVGfwrQpJZ+BJVlFX2WoE5BPcxzUaa1E9lfHzG+TbXhEFmbyM=
=m6TK
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
just a small batch with accumulated pending updates:
1) In IPVS, use system_dfl_long_wq instead of system_long_wq, from
Ismael Luceno.
2) Add missing .checkentry in xt_tcpmss for IPv6, this is a follow up
to a recent harderning, from Florian Westphal.
3) Address a sashiko report in the NAT SIP helper, from Florian Westphal.
4) Tear down flow entries with stale routes using the GC, this is to
detect route updates when hardware offload is enabled.
5) Pass master conntrack as parameter to functions instead of using
exp->master as preparation work to turn exp->master into a cookie.
6) Move expectation event_mask to the nf_conntrack_expect object,
again as preparation work to turn exp->master into a cookie.
7) In IPVS, use kzalloc_obj{s}() typesafe allocations, from Subasri S.
* tag 'nf-next-26-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: use type-safe allocation helpers in ip_vs_rht_alloc
netfilter: nf_conntrack_expect: store event cache in expectation
netfilter: conntrack_helper: pass master conntrack to helper functions
netfilter: flowtable: tear down flow entries with stale dst from GC
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
netfilter: xt_tcpmss: extend checkentry to ipv6
ipvs: Move defense_work and est_reload_work to system_dfl_long_wq
====================
Link: https://patch.msgid.link/20260724104932.437729-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In pwm_auto_temp_store(), the parsed user input was missing bounds
checks, allowing values > 0xF to overflow into the adjacent channel's
bits. Furthermore, the value was being incorrectly written to the
pwm_automatic state array instead of pwm_auto_temp.
Fix this by rejecting values > 0xF with -EINVAL, and assigning the
value to the correct array only after a successful I2C write.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260727034932.0B7C41F000E9@smtp.kernel.org/#t
Fixes: 6f9703d0be ("hwmon: add support for adt7470")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-8-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adt7470_pwm_read() currently ignores failures returned by
pwm1_freq_get(). If the register read fails, the negative error code is
returned through *val while the function itself reports success,
potentially exposing a negative PWM frequency through sysfs.
Fix this by using the cached PWM frequency maintained by the driver,
eliminating the register access from the read path.
Apart from the corrected error propagation and using the cached value,
no functional change is intended.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-6-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADT7470_PWM3_AUTO_MASK and ADT7470_PWM4_AUTO_MASK macros are
currently defined with swapped bit values.
According to Table 22 of the ADT7470 datasheet, the Fan Control Mode
Configuration for register 0x69 follows the exact same bit position
layout as register 0x68:
- 0x68 Bit[7] corresponds to BHVR1 (PWM1) -> 0x80
- 0x68 Bit[6] corresponds to BHVR2 (PWM2) -> 0x40
- 0x69 Bit[7] corresponds to BHVR3 (PWM3) -> 0x80
- 0x69 Bit[6] corresponds to BHVR4 (PWM4) -> 0x40
Consequently, PWM3 should use mask 0x80 and PWM4 should use 0x40.
This typo did not cause any functional bugs because these specific
macros are never referenced in the driver code. Instead, the driver
correctly applies the configuration by relying on the modulo parity of
the channel index (e.g., `channel % 2`) to selectively apply either
ADT7470_PWM1_AUTO_MASK (0x80) or ADT7470_PWM2_AUTO_MASK (0x40).
Since the bit layout is identical between the two configuration
registers, the hardware is currently configured correctly.
Fix the macro definitions to reflect the datasheet accurately and
prevent future bugs or confusion during code review and refactoring.
As this is a purely cosmetic fix with no functional impact, a backport
to stable kernels is not necessary.
Fixes: 6f9703d0be ("hwmon: add support for adt7470")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-4-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower limit of the clamp_val in
auto_update_interval_store() from 0 to 500 milliseconds. This guarantees
a reasonable minimum sleep window between sensor updates, protecting the
system from intentional or accidental I2C bus denial of service.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: 89fac11cb3 ("adt7470: make automatic fan control really work")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-3-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adt7470_temp_write() and adt7470_pwm_write() update the driver's
cached values (temp_min, temp_max, pwm_input, pwm_enable) before issuing
the corresponding regmap_write(), and never check whether the write
succeeded before committing that update. If the I2C transaction fails,
the function correctly propagates the error to the caller, but the cache
silently keeps the new value, which was never actually applied to the
hardware. Subsequent reads then report a value that does not match the
device state.
Reorder both write paths to update the cache only after a successful
regmap_write(), so the cache always reflects what was actually
written to the hardware.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-2-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
During adt7470_read_temperatures(), the driver temporarily switches
the PWM channels to manual mode, performs the temperature collection,
and then restores the original configuration registers.
However, if an I2C transaction fails at any point after entering manual
mode, the function aborts and returns immediately. This leaves the
configuration registers un-restored, permanently trapping the fans in
manual mode.
Introduce a recovery path to ensure that the original PWM configuration
registers are always restored, even when intermediate I2C operations
fail.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-1-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
nv_remove() frees the per-CPU txrx_stats before unregister_netdev().
Until unregister completes, ndo_get_stats64, the NAPI/xmit data path,
and nv_close()/drain may still access txrx_stats, leading to a
use-after-free.
Free the stats only after unregister_netdev().
Fixes: f4b633b911 ("forcedeth: use per cpu to collect xmit/recv statistics")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20260723092637.2135095-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Include the word 'at' to make the sentence grammatically correct
inside the description for nilfs2 recovery code. This improves
documentation without changing the original meaning.
Signed-off-by: Manoj K M <manojkm24dev@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Several CI runs failed in the libarena parallel tests with -4 (-EINTR) [1],
which says nothing about what actually went wrong.
Two workers can fail like this:
worker 1: gives up, e.g. the rendezvous times out, sets test_abort and
returns its own error (-ETIMEDOUT)
worker 2: sees test_abort and returns -EINTR
-EINTR only means "someone else already gave up", so it carries no
information. Which of the two gets reported depends on the order
pthread_join() collects them, because
err = err ?: (long)thread_ret;
keeps the first non-zero value and drops the rest. When the -EINTR worker
comes first, the error describing the actual failure is lost.
Skip -EINTR entirely: a worker only returns it once another worker has
already reported the real error, so report and log only the real errors.
It is still unclear whether the timeouts come from CI load or from a
problem in the test itself. Report the error accurately first, so the next
failure can be diagnosed.
[1]:
https://github.com/kernel-patches/bpf/actions/runs/29867905253/job/88764463566https://github.com/kernel-patches/bpf/actions/runs/29878191901/job/88794845824
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260723061347.398591-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Our v6.18 based Android system is continuely suffering livelock and bad
page stat as shown in[1] which related to broken xarray slot status. By
investigating big folio operations within f2fs, we find below races and
fix it by get the nr_pages before drop the refcount and folio_lock.
f2fs_get_read_data_folio() calls f2fs_folio_put() before
folio_nr_pages() when invalidating a large folio from the page cache.
That unlocks the folio and drops the caller reference, leaving a window
where a concurrent truncate or folio split can shrink the compound folio
or free it before the invalidate range is computed. An undersized range
then leaves split sub-folios in mapping->i_pages, which can later
interact badly with truncate and reclaim (stale xarray entries and bad
page state when folio->mapping no longer matches the mapping being
truncated).
[1]
PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3"
#0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4
#1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798
#2 [ffffffc08ef2bb60] truncate_inode_pages_range at ffffffe52c19e83c
#3 [ffffffc08ef2bbc0] truncate_inode_pages_final at ffffffe52c19ec2c
#4 [ffffffc08ef2bc20] f2fs_evict_inode at ffffffe52c4c8400
#5 [ffffffc08ef2bcc0] evict at ffffffe52c2de9f4
#6 [ffffffc08ef2bd00] iput at ffffffe52c2db1b4
#7 [ffffffc08ef2bd30] dentry_unlink_inode at ffffffe52c2d7204
#8 [ffffffc08ef2bd50] __dentry_kill at ffffffe52c2d3dcc
#9 [ffffffc08ef2bd80] dput at ffffffe52c2d3c3c
#10 [ffffffc08ef2bda0] __fput at ffffffe52c2b0a7c
#11 [ffffffc08ef2bde0] ____fput at ffffffe52c2b1034
#12 [ffffffc08ef2bdf0] task_work_run at ffffffe52beea200
#13 [ffffffc08ef2be20] exit_to_user_mode_loop at ffffffe52bfbc17c
#14 [ffffffc08ef2be80] el0_svc at ffffffe52d1f8e54
#15 [ffffffc08ef2beb0] el0t_64_sync_handler at ffffffe52d1f8d10
Cc: stable@kernel.org
Fixes: 05e65c14ea ("f2fs: support large folio for immutable non-compressed case")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a unit test for CPPC Performance Priority that modifies the floor
perf and confirms if the modification was successful similar to the
energy_performance_preference unit test.
On platforms that do not support X86_FEATURE_CPPC_PERF_PRIO, the test
returns -EOPNOTSUPP and amd_pstate_ut_check_floor_freq is marked as
"skipped".
Suggested-by: Kalpana Shetty <kalpana.shetty@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-10-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Extend the EPP unit test to cover the "dynamic" epp mode. Since
"dynamic_epp" is no longer a system-wide toggle, remove the legacy
"dynamic_epp" bits from the unit test.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-9-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Symbols exported by amd-pstate.c are ever only needed for amd-pstate-ut.
Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export these symbols
selectively to "amd-pstate-ut" namespace as opposed to all GPL modules.
No functional changes intended.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-8-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Update the admin-guide for dynamic_epp describing the latest integration
into energy_performance_preference selections.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-7-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Since dynamic_epp has been converted to an
"energy_performance_preference", toggling the feature via the sysfs file
or the kernel cmdline is now redundant.
Remove the sysfs file and the "amd_dynamic_epp" cmdline and only depend
on "energy_performance_preference" to toggle dynamic_epp.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-6-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Convert the global "dynamic_epp" toggle into a per-CPU
"energy_performance_preference" mode "dynamic" that allows toggling the
functionality of "dynamic_epp" at a per-CPU level.
Instead of being a system-wide toggle, users can opt into the
functionality of dynamic EPP on a per-CPU basis by switching to the
powersave governor and selecting the "dynamic" mode from the available
performance preferences.
Unlike the previous implementation that had to check for driver mode
before toggling on the functionality, block writes to certain sysfs
files, potentially disallow policy change, etc. the per-CPU toggle fits
naturally into the intended design and provides more granular control to
the user.
The dynamic_epp file is now redundant as the option to toggle it on is
controlled via energy_performance_preference, and the dynamic_epp file
will be removed in the subsequent commit.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-5-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Avoid duplication by extracting the switch case that derives EPP based
on platform profile into the amd_pstate_get_epp_from_platform_profile()
helper.
No functional changes intended.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-4-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Initialization of bios_min_perf (BIOS Requested CPU Min Freq.) only
succeeds when the driver init finds the CPPC_REQ MSRs to have all 0s
except for MIN_PERF bits.
A kexec puts the driver through the suspend path which, although resets
the min_perf back to bios_min_perf, keeps the rest of the CPPR_REQ
intact with the last value at the time of suspend.
The defensive check for bios_min_perf exists to prevent the min perf
from last CPPC_REQ being incorrectly considered as bios_min_perf when
a kexec switches from an older kernel running the version of driver
which is not aware of bios_min_perf to a newer one.
This scenario is extremely unlikely and Mario suggested it is better to
simplify the initialization rather than complicating the suspend resume
paths.
Drop the defensive check for bios_min_perf initialization and add a
debug message to dump the BIOS Requested Min Freq. to console leaving
enough breadcrumbs for debug if a situation so arises.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-3-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
amd_pstate_update_min_max_limit() sets the min_limit_perf to the
nominal_perf to avoid frequency throttling when the system is idling.
This was found to be an ideal default but is suboptimal for users who
have profiled their workload at different operating frequencies and have
configured the optimal idling frequency via bios_min_perf.
Use the bios_min_perf (if configured) as the min_limit_perf when running
with performance governor. In absence of bios_min_perf, continue using
nominal_perf as the default min_limit_perf to avoid throttling.
Fixes: 608a76b652 ("cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260727072056.1248-2-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Xin Xie says:
====================
net: hsr: PRP RedBox (PRP-SAN) support
This series adds PRP RedBox support to the hsr driver: a PRP node that
proxies one or more SANs sitting behind an interlink port (IEC 62439-3,
PRP-SAN). HSR-SAN has been supported since commit 5055cccfc2 ("net: hsr:
Provide RedBox support (HSR-SAN)"); this extends the equivalent capability
to PRP, reusing the existing protocol-neutral proxy machinery
(proxy_node_db, hsr_proxy_announce(), hsr_prune_proxy_nodes()).
A SAN behind the interlink does bidirectional unicast with peers on the PRP
network, its source MAC is preserved on the wire, the PRP RCT is correct,
and the RedBox announces each proxied SAN with the RedBox-MAC TLV (Type 30)
in its supervision frames.
The series is bisect-safe: the datapath, duplicate discard and supervision
support are added first; the rtnetlink rejection of "type hsr ... interlink
<dev> proto 1" is removed only in patch 3, once the feature is complete.
Design notes:
- prp_drop_frame() does not walk the node tables. The destination
classification (PRP-network node vs proxied SAN) is resolved once per
frame in fill_frame_info() and cached in struct hsr_frame_info, so the
per egress-port drop decision is O(1) in the softIRQ path. The
classification is gated on PRP RedBox devices (prot_version == PRP_V1 &&
hsr->redbox), so HSR RedBox traffic is not affected.
- The LAN A/B duplicate test is factored into prp_is_lan_dup() so the new
PRP interlink rules in prp_drop_frame() do not change hsr_drop_frame()
behaviour, including the NETIF_F_HW_HSR_FWD path. This is software PRP
RedBox only; it adds no new hardware-offload contract.
- The supervision emitter uses pre-reserved tailroom (hsr_init_skb() +
skb_put()) on the existing GFP_ATOMIC path; no skb_linearize() or
pskb_expand_head(). The RedBox-MAC TLV is followed by an explicit EOT
(Type 0, Length 0); padding via skb_put_padto(ETH_ZLEN) and the 6-byte
PRP RCT remain at the absolute tail of the egress frame.
- The hsr_get_node() hsr_ethhdr length guard is relaxed only for PRP
supervision frames (prot_version == PRP_V1 && ETH_P_PRP && is_sup), which
are untagged with mac_len == ETH_HLEN. HSR (ETH_P_HSR) supervision is
front-tagged and keeps the original length requirement, so HSR
malformed-frame filtering is unchanged.
====================
Link: https://patch.msgid.link/20260717201457.54-1-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a kselftest that builds a PRP RedBox (interlink) with a SAN behind the
interlink and a peer DANP, and checks bidirectional unicast across the
interlink, preservation of the SAN source MAC on the PRP network, and that
the proxy-announce supervision frame carries the RedBox-MAC TLV (Type 30)
terminated by an EOT marker. It reuses the hsr_common.sh / lib.sh helpers
and skips cleanly on a kernel or iproute2 without PRP interlink support.
The background ping is killed by its exact PID: ip netns exec does not
isolate the PID namespace, so a pattern-based pkill could hit unrelated
processes on the host.
Signed-off-by: Xin Xie <xiexinet@gmail.com>
Link: https://patch.msgid.link/20260717201457.54-5-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the PRP interlink datapath, duplicate discard and supervision support
in place, a PRP device can act as a RedBox. Remove the rtnetlink rejection
of "type hsr ... interlink <dev> proto 1"; the feature is implemented
unconditionally by the preceding patches.
Signed-off-by: Xin Xie <xiexinet@gmail.com>
Link: https://patch.msgid.link/20260717201457.54-4-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A PRP RedBox must announce the SANs it proxies so peers populate their
proxy node tables. The proxy-announce machinery (hsr_proxy_announce(),
armed via hsr->redbox) already iterates proxy_node_db under RCU and calls
send_sv_frame() once per SAN, but the PRP sender emitted neither the
announced SAN MAC nor the RedBox-MAC TLV that IEC 62439-3 requires.
Extend send_prp_supervision_frame() so that, for a proxy-announce
(identified by the interlink port, an O(1) test), the frame carries the
proxied SAN MAC as MacAddressA followed by the RedBox-MAC TLV (Type 30)
and an explicit End-of-TLV marker before padding.
hsr_get_node() must also accept the reinjected proxy-announce: a PRP
supervision frame is an untagged ETH_P_PRP frame (mac_len == ETH_HLEN, the
RCT is appended only on egress) sourced from macaddress_redbox, which is
never learned from data. Exempt only PRP supervision frames from the
hsr_ethhdr length guard; HSR (ETH_P_HSR) supervision is front-tagged and
keeps the original guard, so HSR malformed-frame filtering is unchanged.
Also align macaddress_redbox so that ether_addr_copy() and
ether_addr_equal() on it are safe on architectures without efficient
unaligned access.
Signed-off-by: Xin Xie <xiexinet@gmail.com>
Link: https://patch.msgid.link/20260717201457.54-3-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A PRP RedBox proxies SANs that sit behind an interlink port: their frames
must reach the PRP network with the SAN source MAC preserved, and PRP
unicast must be steered between the LAN and the SAN segment correctly.
Add the PRP interlink forwarding rules to prp_drop_frame() and give RedBox
nodes a second duplicate-discard slot so the two LAN copies of a frame
destined to a SAN collapse to a single delivery out the interlink.
The destination classification (is the unicast DA a PRP-network node or a
proxied SAN) is resolved once per frame in fill_frame_info(), gated to PRP
RedBox devices, and cached in struct hsr_frame_info, so prp_drop_frame()
stays O(1) and does not walk the node tables for every candidate egress
port in the softIRQ path. HSR RedBox frame classification is untouched.
Factor the LAN A/B duplicate test into prp_is_lan_dup() so the new PRP
interlink rules do not change hsr_drop_frame() behaviour, including the
NETIF_F_HW_HSR_FWD path which keeps using the LAN-duplicate test only.
Publish the RedBox state before the first hsr_add_port(): the slave and
interlink rx handlers are live from hsr_add_port() on and rtnl does not
stop softirq processing, so a frame could otherwise be handled while
hsr->redbox is still false. hsr_add_node() sizes each node's per-port
sequence state from hsr->redbox; a node learned in that window would get
a single-port sequence block, breaking the interlink duplicate discard
(WARN_ON_ONCE plus duplicate delivery to the SAN) and letting the
supervision sequence-block merge read beyond the source node's allocated
sequence bitmap. Publishing the flag before any port exists makes the
per-node sizing uniform by construction. This is safe: the proxy
announce timer is only armed from hsr_check_announce() once the master
is running, the packet-path readers of hsr->redbox tolerate an empty
proxy node database and an absent interlink port, and the
prune_proxy_timer is still armed only after the interlink port has been
attached successfully.
Additionally bound the supervision sequence-block merge by the smaller
of the two nodes' seq_port_cnt as defense in depth against mismatched
node sizes.
Signed-off-by: Xin Xie <xiexinet@gmail.com>
Link: https://patch.msgid.link/20260717201457.54-2-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Blocks of pinfile may not aligned to section size due to wrong use
on pinfile, result in heavy overhead of GC, let avoid this by
adding additional check condition in f2fs_setattr().
- truncate -s 8mb pinfile
: random checkpoint may persist filesize w/ inode
- fallocate -o 0 -l 8mb pinfile
- f2fs_fallocate
- f2fs_expand_inode_data
- f2fs_allocate_pinning_section
- f2fs_map_blocks
- f2fs_map_lock
- __allocate_data_block
- file_need_truncate
: w/ FADVISE_TRUNC_BIT, we can expect unaligned mapping can be
truncated while open() if f2fs is not umount abnormally
- f2fs_map_unlock
: following f2fs checkpoint and sudden power-cut
- mount
- open pinfile
- f2fs_file_open
- finish_preallocate_blocks
- truncate_setsize
: filesize is 8mb
- f2fs_truncate
: can only truncate block outside filesize, rather than truncating
unaligned blocks inside filesize
Fixes: f5a53edcf0 ("f2fs: support aligned pinned file")
Cc: stable@kernel.org
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 02117b8ae9 ("f2fs: Set GF_NOFS in read_cache_page_gfp while doing
f2fs_quota_read") adds GFP_NOFS in f2fs_quota_read() to avoid below deadlock:
- do_sys_open
- vfs_open
- dquot_file_open
- dquot_initialize
- dqget
- dquot_acquire
: locks &dqopt->dqio_mutex (VFS Quota Mutex)
- qtree_read_dquot
- f2fs_quota_read
- read_mapping_page (GFP_KERNEL / allows GFP_FS)
- __alloc_pages_nodemask
- try_to_free_pages (Direct Reclaim)
- prune_icache_sb
- evict
- f2fs_evict_inode
- dquot_drop
- dqput
- dquot_commit
: tries to lock &dqopt->dqio_mutex again
==> DEADLOCK (waiting for itself)
As Jan Kara mentioned, quota system has fixed this issue w/ commit
537e11cdc7 ("quota: Prevent memory allocation recursion while holding
dq_lock"), so this GFP_NOFS flag should be relic, let's use GFP_KERNEL
instead.
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch proposes to drop FGP_NOFS from f2fs_filemap_get_folio()
in f2fs_write_begin(), I don't see there is potential deadlock issue
when __filemap_get_folio() calling into filesystem reclaim interfaces,
e.g. .writepages, evict_inode, shrinker.
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cifs_file_set_size() calls cifs_setsize() on success, which calls
i_size_write(), updating i_size to the new value. The subsequent
check attrs->ia_size != i_size_read() in both cifs_setattr_unix()
and cifs_setattr_nounix() therefore always evaluates false after a
successful cifs_file_set_size(), making the smp_store_release() of
time_last_write dead code. The truncate path was unprotected against
stale readdir size updates.
Move the stamp to before the cifs_file_set_size() RPC call, guarded
by attrs->ia_size != i_size_read() to exclude no-op same-size
ftruncate(2) calls from stamping time_last_write unnecessarily.
On the error path the stamp remains rather than being restored:
restoring a stale snapshot (prev_tlw) could silently erase a
concurrent _cifsFileInfo_put() close stamp if that close arrived
between the READ_ONCE and the smp_store_release. readdir is
suppressed until the stamp expires, which extends beyond one acregmax
if the caller retries failed truncations. stat() is unaffected: the
cifs_revalidate_dentry_attr() path calls cifs_fattr_to_inode() with
from_readdir=false, which bypasses the time_last_write check in
is_size_safe_to_change() entirely and always writes the authoritative
QUERY_INFO result to i_size.
Remove the now-unreachable stamp from the dead block in both functions.
Fixes: e8a8d54c2d ("cifs: prevent readdir from changing file size due to stale directory metadata")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
