RPMB frame buffers are passed as u8 pointers and do not have an alignment
guarantee. Use unaligned accessors for the req_resp field.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260717153914.26321-6-liqiang01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The RPMB core only verifies that request and response buffers are
nonempty. This callback reads req_resp at the end of the first request
frame before validating the request length. Require a complete frame
before that access.
Fixes: b06b8c4214 ("scsi: ufs: core: Add OP-TEE based RPMB driver for UFS devices")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20260717153914.26321-5-liqiang01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The connected lane count is used by TX equalization code to index arrays
sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts
before they can be propagated.
Fixes: 03e5d38e2f ("scsi: ufs: core: Add support for TX Equalization")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20260717153914.26321-4-liqiang01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The single-doorbell completion path can call ufshcd_compl_one_cqe() with a
NULL CQE. If no command is associated with the completion tag, the warning
message dereferences the CQE while reporting the error. Avoid that
dereference and include the invalid tag in the warning.
Fixes: 22089c2180 ("scsi: ufs: core: Optimize the hot path")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260717153914.26321-3-liqiang01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread.
Fixes: 4b828fe156 ("scsi: ufs: revamp string descriptor reading")
Fixes: d794b499f9 ("scsi: ufs: core: fix incorrect buffer duplication in ufshcd_read_string_desc()")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260717153914.26321-2-liqiang01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The macro lost its last user when select() was reimplemented on top of
pselect6 for every architecture; sys/select.h no longer looks at it,
and nothing else in the tree does either. See commit 668e437372
("tools/nolibc/select: drop non-pselect based implementations").
The comment that goes with it is stale for the same reason, as neither
architecture can end up calling old_select any more.
Drop both from arch-x86.h and arch-arm.h.
Cc: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@openresty.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Qualcomm UFS controller found on SoCs SA8255P/SA8797P has a MCQ I/O address
space. It should be defined in the bindings even though Linux driver
currently doesn't utilize it. Fix the binding before it gets adopted by
DTS.
Fixes: e2725ed2a7 ("scsi: ufs: dt-bindings: Document bindings for SA8255P UFS Host Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720023552.2667237-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit fbefe22811 ("scsi: libsas: Don't always drain event workqueue
for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock:
the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,
calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI
devices and waits for the host to become runtime-active. But the host
cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the
drain is blocked on that very handler.
However skipping the drain reintroduces a race: hisi_sas returns from
resume before all PHY UP work and libsas discovery work finish. The
controller may then autosuspend while disks are still waking up. The
disks issue IO to a suspended controller, the IO fails, and the disks
get disabled.
Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT
notification to after sas_drain_work(). By then the host resume is about
to complete, so device removal through device_link no longer blocks on
the resume and the cycle is broken.
With the deadlock gone, restore sas_resume_ha() (the draining variant)
in hisi_sas and remove sas_resume_ha_no_sync().
The reorder is safe for the other libsas consumers (isci, pm8001,
aic94xx, mvsas). During suspend, sas_suspend_devices() calls
sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to
NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a
timed-out phy's disk is immediately rejected by the LLDD before reaching
hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),
and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both
complete directly via scsi_done() without entering SCSI EH. This is
identical in both the old and new ordering since lldd_dev_gone runs
during suspend, before resume. The reorder only affects when the
PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()
vs. asynchronous after resume returns), not whether I/O can reach the
device. aic94xx and mvsas do not register any PM ops and never reach
this code path.
Fixes: fbefe22811 ("scsi: libsas: Don't always drain event workqueue for HA resume")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check.
Fixes: a081c13e39 ("[SCSI] iscsi_tcp: split module into lib and lld")
Suggested-by: Chris Leech <cleech@redhat.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260716065848.1653431-1-sammiee5311@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SBS SerialNumber register is a 16-bit word and chip->serial[] is
sized for its four hex digits plus the NUL terminator. The value is
carried in an int, though, and only the negative half of that range is
rejected before the conversion, so the compiler has to assume
[0, INT_MAX] - up to eight digits:
drivers/power/supply/sbs-battery.c:835:32: warning: '%04x' directive writing between 4 and 8 bytes into a region of size 5 [-Wformat-overflow=]
drivers/power/supply/sbs-battery.c:835:31: note: directive argument in the range [0, 2147483647]
drivers/power/supply/sbs-battery.c:835:9: note: 'sprintf' output between 5 and 9 bytes into a destination of size 5
The overflow is not reachable: sbs_read_word_data() returns the result of
i2c_smbus_read_word_data(), which yields at most 0xffff on success, and
negative returns are rejected just above. Cast to u16 to state the
register width at the point of use, which also lets the compiler prove
the buffer is large enough. No functional change.
This is the only W=1 warning in this driver.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260726072206.7-3-bbnpreetsingh@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
sbs_get_battery_serial_number() formats the battery serial number into
sbs_serial[], a single file-scope buffer shared by every sbs-battery
instance, and points val->strval at it.
Nothing restricts this driver to one instance. It binds per I2C client,
and sbs-manager registers one muxed I2C channel per supported battery
specifically so that the smart battery driver can be bound to each of
them, so several sbs-battery instances on one system is a supported
configuration.
The power supply core reads strval after the driver's get_property()
callback has returned: power_supply_show_property() fills a local
union power_supply_propval, then formats it with sysfs_emit(). Two
concurrent POWER_SUPPLY_PROP_SERIAL_NUMBER reads on different batteries
therefore race for the shared buffer - battery B's sprintf() can land
between battery A filling the buffer and the core reading it, and
battery A then reports battery B's serial number.
Move the buffer into struct sbs_info so that each battery formats into
its own storage. It is deliberately not added to the chip->strings[]
array: those entries hold the cached constant strings that
sbs_invalidate_cached_props() clears on presence changes, whereas the
serial number is re-read from its word register on every access.
Fixes: d3ab61ecba ("bq20z75: Add support for more power supply properties")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260726072206.7-2-bbnpreetsingh@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The variable 'fact' was used for debug but this was removed in commit
62b434b0db ("scsi: dc395x: Remove DEBUG conditional compilation"). The
variable is now redundant and can be removed.
Cleans up clang scan build warning:
drivers/scsi/dc395x.c: In function ‘msgin_set_sync’:
drivers/scsi/dc395x.c:2185:13: warning: variable ‘fact’ set but not used [-Wunused-but-set-variable]
2185 | int fact;
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260714073510.43289-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Louis Sautier <sautier.louis@gmail.com> says:
Expose the IOC and board temperature sensors of LSI / Broadcom / Avago
SAS HBAs that bind to mpt3sas through the hwmon interface. The data
lives in MPI IO Unit Page 7.
The same fields are exposed by Broadcom's userspace tooling through
the /dev/mpt[23]ctl ioctl path (typically root-only): IOCTemperature
and BoardTemperature in lsiutil; ROC and Controller in storcli.
With this driver, sensors(1) shows them unprivileged:
$ sensors mpt3sas-pci-0200
mpt3sas-pci-0200
Adapter: PCI adapter
IOC: +42.0°C
Testing
-------
Build-tested all four SCSI_MPT3SAS x HWMON combinations (=y and =m
each), including the SCSI_MPT3SAS=y with HWMON=m case that requires
IS_REACHABLE().
Validated across three Broadcom SAS chip generations. None of the
cards had a board sensor present, so the testing only covers the
IOC channel:
* LSI 9500-8i / SAS3816, SAS-3:
- hwmon device registers as "mpt3sas" with only temp1 (IOC) exposed
- IOC reading matches `storcli /c0 show temperature` and
`lsiutil -p1 -a 25,2,0,0`
- rmmod / modprobe cycle goes through the explicit
unregister/register paths cleanly
* LSI 9305-24i / SAS3224, SAS-3: same behaviour.
* LSI 9211-4i / SAS2004, SAS-2: firmware reports both
*TemperatureUnits = NOT_PRESENT, no hwmon device registered
(graceful-skip path).
Not verified (no available hardware):
* Path with both IOC and board sensors present.
* Fahrenheit-units conversion.
* Sub-zero readings (signed-cast path).
Link: https://patch.msgid.link/20260630224922.2543096-1-sautier.louis@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Please consider pulling these changes from the signed vfs-7.2-rc5.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCamYljAAKCRCRxhvAZXjc
ogWyAPwORZDIIsRiAQbnPs+OkYszuWCY29OeUrTf+m3z+tBTLwD+NUFtpH5XIcYJ
3jHtGXPoHjEaOVsNyIdxwnOxWfo+6ws=
=VNq0
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check.
Fixes: 7996a778ff ("[SCSI] iscsi: add libiscsi")
Suggested-by: Sashiko AI <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260714104934.1404423-1-sammiee5311@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just a couple of small bits for the SpacemiT driver - one small fix, and
a new compatible in the DT binding.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpmL3sACgkQJNaLcl1U
h9CDnwgAggPOeUHMrQWYES7f74oTVl/kt0B1TBV6g91r8a4p0yyy7Kn6C1njBQ7n
N5bgSL2EkpQRjj2d5akh42Apwb5EQZMdqICo68XElWnk0AxH6Y1PdRkfcruU9PnS
t7KJEeBxdsZAJhx5ZEWZrIwjY/rbEvI+rfePgdm8kVeUUVs4ur6Zg1DNk/LgolOP
xr60E5DWHIczjJ3Ae+svL5mmJ8FICFOThAYjMzGyRACB4c3znMBhzKVoNrUR6sl5
7qSf1x3WBXIYwd0RRs9YhTF6vQhlnfKfu8rPfb2S6v8rE7JmmokLr3kVFzgpph1K
o893VMecWe5al0ZuE2qdf44w2Ohv0Q==
=2PTr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Just a couple of small bits for the SpacemiT driver - one small fix,
and a new compatible in the DT binding"
* tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spacemit: add K3 SPI compatible
spi: spacemit: Correct TX FIFO slot calculation
One driver specific fix where one of the MediaTek drivers duplicated
some core code buggily, and a core fix for an ordering issue on startup
where we could end up configuring a voltage outside of constraints due
to the order in which we applied constraints.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpmMC4ACgkQJNaLcl1U
h9DoiAf/V64CUAFspev+AtzWpx1Su9zZoSzoMM5Gj0WBuMoo4G5hZj804DQ/n8al
sai+f0loMEVcblfpZNOlYagSkDgvvIc/1SQrAQ1oIxMbpotE1vn4htzGsJJuwwgL
lh5GC4CsrXOSRX3VG6pJeBR6RTb9VEbkAhLoxKAJyPlcynk2KdBPwR9B1ZlCgpe6
MP2WrurEVexvuDlZdE8THYth4FXCms0uH5VLo+Q3G4r1Ayt9YpvbvG91fzJSJGti
NAzAWma2GFGwQkka5sgMYHyP6rwM1vJ71mz+Bq9G5fUe6DyEp85jv993D5lq2vbH
69GO6ZTZmruCqOkDEELIKA4EpKYzZA==
=3XbV
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One driver specific fix where one of the MediaTek drivers duplicated
some core code buggily, and a core fix for an ordering issue on
startup where we could end up configuring a voltage outside of
constraints due to the order in which we applied constraints"
* tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: clamp voltage constraints before applying apply_uV
regulator: mt6358: use regmap helper to read fixed LDO calibration
kthread_run() can fail and return an error pointer, but sgp_probe() stores
it and returns success, so the device is registered without its IAQ thread
and sgp_remove() later passes the error pointer to kthread_stop(). Return
the error from probe instead.
Fixes: ce51412416 ("iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The QST QMC6308 is a 3-axis anisotropic magnetoresistive (AMR)
magnetometer on I2C, found e.g. in the Fairphone 6. Its register map
is not compatible with the QMC5883L's, so add a separate driver rather
than extending the QMC5883L driver.
Support raw X/Y/Z reads, output data rate, field range, filter
oversampling ratio, the mount matrix, and runtime PM.
Run measurements in the chip's periodic "normal" mode paced by the
DRDY flag rather than in its one-shot "single" mode: the datasheet
specifies no conversion time that could bound a one-shot wait, while
normal mode is paced by the specified output data rates, which also
keeps the sampling_frequency ABI meaningful.
Runtime PM puts the chip into its suspend mode after 500 ms without a
reading, dropping supply current to a few microamps. The suspended
chip retains its registers and keeps responding on I2C, so resuming
only rewrites the mode field and discards one stale sample, and
configuration changes apply even while suspended; VDD is left enabled
across runtime suspend.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add device tree bindings for the QST QMC6308, a 3-axis anisotropic
magnetoresistive (AMR) magnetometer. It is an I2C device with a single
supply and no interrupt pin, at I2C address 0x2c.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Here are a number of small char/misc/etc. driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCamYCHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTpwCgyyS6niRHf2Y0qx/o+i8s87h+ipoAoJeaOzb7
RWX/ZYiUEoQCtfbxmXZF
=cRG6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com> says:
Add support for MI2S clock control within q6apm-lpass DAIs, including
handling of MCLK, BCLK via the DAI .set_sysclk callback. Each MI2S port
now retrieves its clock handles from the device tree, allowing per-port
clock configuration and proper enable/disable during startup and shutdown.
On platforms such as Monaco and Lemans, third-party codecs are
hardware-wired to the SoC and do not always have an in-tree codec
driver to manage their clocks. For these designs, clock line
enablement must be driven from the platform side, and this
series provides the necessary support for that.
On QAIF-based platforms such as Shikra and Hawi, responsibility
for voting I2S MCLK and bit-clock has moved from the DSP to the
kernel. This series introduces the required device tree binding
support to represent and vote for these clocks from the kernel.
Enhances the sc8280xp machine driver to set the boards spacific
configurations.
Link: https://patch.msgid.link/20260724182446.1484894-1-mohammad.rafi.shaik@oss.qualcomm.com
The sc8280xp machine driver is currently written with a largely
SoC-centric view and assumes a uniform audio topology across all boards.
In practice, multiple products based on the same SoC use different board
designs and external audio components, which require board-specific
configuration to function correctly.
Several Qualcomm platforms integrate third-party audio codecs
or use different external audio paths. These designs often require
additional configuration such as explicit MI2S MCLK/BCLK settings for
audio to work.
This change enhances the sc8280xp machine driver to support board-specific
configuration such as allowing each board variant to provide its own DAPM
widgets and routes, reflecting the actual audio components and connectors
present and enabling MI2S MCLK programming for boards that use external
codecs requiring a stable master clock.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724182446.1484894-4-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MI2S clock control within q6apm-lpass DAIs, including
handling of MCLK, BCLK via the DAI .set_sysclk callback. Each MI2S port
now retrieves its clock handles from the device tree, allowing per-port
clock configuration and proper enable/disable during startup and shutdown.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724182446.1484894-3-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the qcom,q6apm-lpass-dais device tree binding to explicitly
describe Digital Audio Interface (DAI) child nodes.
Add #address-cells and #size-cells to allow representation of multiple
DAI instances as child nodes, and define a dai@<id> pattern to document
per-DAI properties such as the interface ID and associated clocks.
On platforms such as Monaco and Lemans, third-party codecs are hardware
wired to the SoC and do not always have an in-tree codec driver to manage
their clocks. For these designs, clock line enablement must be driven
from the platform side, and this series provides the necessary support
for that.
On QAIF-based platforms such as Shikra and Hawi, responsibility for voting
I2S MCLK and BCLK has moved from the DSP to the kernel. This series
introduces the required device tree binding support to represent and
vote for these clocks from the kernel.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724182446.1484894-2-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are two small staging driver fixes for 7.2-rc5. They both resolve
some reported bugs in the rtl8723bs staging driver and have been in
linux-next for over a week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCamYAxA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfoQCghy7Exq7vpWMlhR8LwQucWqABsxsAnjzK86WN
8VZ68CMngObWMPH31Dx7
=sWD7
-----END PGP SIGNATURE-----
Merge tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.2-rc5. They both resolve
some reported bugs in the rtl8723bs staging driver and have been in
linux-next for over a week with no reported issues"
* tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
staging: rtl8723bs: fix inverted HT40 secondary channel offset
Here are two small serial driver fixes for 7.2-rc5. They are:
- sc16is7xx get_direction() callback fix, which resolves a
user-triggerable warning in the driver
- NULL pointer dereference on some platforms using the 8250_mid serial
driver
Both have been in linux-next for over a week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCamYBZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMjACgpSS04QGbBIWmMHnxBWHnDT+Z8qoAn210DRbo
l5E84oG0BSJg1i9c3mnj
=WB87
-----END PGP SIGNATURE-----
Merge tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 7.2-rc5. They are:
- sc16is7xx get_direction() callback fix, which resolves a
user-triggerable warning in the driver
- NULL pointer dereference on some platforms using the 8250_mid
serial driver
Both have been in linux-next for over a week with no reported issues"
* tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: implement gpio get_direction() callback
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Bard Liao <yung-chuan.liao@linux.intel.com> says:
With commit c84179a1d3 ("ASoC: Intel: sof_sdw: append dai type to dai
link name unconditionally"), function topology can apply to all
SoundWire codec configurations. Set .get_function_tplg_files callback to
use function topology by default. If any required function topology can
not be found in the file system, it will fallback to use the monolithic
topology.
Link: https://patch.msgid.link/20260723070521.870256-1-yung-chuan.liao@linux.intel.com
With commit c84179a1d3 ("ASoC: Intel: sof_sdw: append dai type to dai
link name unconditionally"), function topology can apply to all
SoundWire codec configurations. Set .get_function_tplg_files callback to
use function topology by default. If any required function topology can
not be found in the file system, it will fallback to use the monolithic
topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit c84179a1d3 ("ASoC: Intel: sof_sdw: append dai type to dai
link name unconditionally"), function topology can apply to all
SoundWire codec configurations. Set .get_function_tplg_files callback to
use function topology by default. If any required function topology can
not be found in the file system, it will fallback to use the monolithic
topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit c84179a1d3 ("ASoC: Intel: sof_sdw: append dai type to dai
link name unconditionally"), function topology can apply to all
SoundWire codec configurations. Set .get_function_tplg_files callback to
use function topology by default. If any required function topology can
not be found in the file system, it will fallback to use the monolithic
topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit c84179a1d3 ("ASoC: Intel: sof_sdw: append dai type to dai
link name unconditionally"), function topology can apply to all
SoundWire codec configurations. Set .get_function_tplg_files callback to
use function topology by default. If any required function topology can
not be found in the file system, it will fallback to use the monolithic
topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are still some Google machines that need to use the monolithic
topology. Add the machine check for those machines.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This check function return snd_soc_acpi_intel_sdca_is_device_rt712_vb()
&& snd_soc_acpi_intel_no_function_topology() for the cases that need
check is the device is rt712 vb and no function topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260723070521.870256-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are some small USB fixes and new device quirks and ids for 7.2-rc5.
Included in here are:
- usb storage quirk added
- new usb serial device ids added
- usb-serial device name leak and other bug fixes
- small xhci driver fixes
- normal batch of typec driver fixes for reported issues
- usb-atm much-reported-by-syzbot fix for firmware download races
- sysfs BOS device removal race fix
- lots of usb gadget driver fixes for reported issues
- other small USB driver fixes for other reported problems.
All of these have been in linux-next this past week, many of them much
longer.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCamYE0A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk0twCdFi0ivPtWtEzmP7lUNRCzmyT3MvoAoI7o6lJm
E5+ID/c4mWfX/DjoPFhU
=uUBv
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device quirks and ids:
- usb storage quirk added
- new usb serial device ids added
- usb-serial device name leak and other bug fixes
- small xhci driver fixes
- normal batch of typec driver fixes for reported issues
- usb-atm much-reported-by-syzbot fix for firmware download races
- sysfs BOS device removal race fix
- lots of usb gadget driver fixes for reported issues
- other small USB driver fixes for other reported problems
All of these have been in linux-next this past week, many of them much
longer"
* tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: typec: ucsi: Correct teardown ordering in ucsi_init() error path
USB: serial: io_edgeport: cap received transmit credits
USB: serial: option: add TDTECH MT5710-CN
USB: serial: io_ti: reject oversized boot-mode firmware
USB: serial: mxuport: validate firmware header size
usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect
usb: typec: ucsi: yoga_c630: Remove redundant duplicate altmode handling
usb: typec: ucsi: Add duplicate detection to nvidia registration path
usb: typec: ucsi: Detect and skip duplicate altmodes from buggy firmware
usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback
usb: chipidea: fix usage_count leak when autosuspend_delay is negative
usb: core: sysfs: add lock to bos_descriptors_read()
usb: musb: omap2430: Do not put borrowed of_node in probe
usb: core: port: Deattach Type-C connector on component unbind
USB: storage: add NO_ATA_1X quirk for Longmai USB Key
USB: serial: ftdi_sio: add support for E+H FXA291
USB: serial: keyspan_pda: fix data loss on receive throttling
usb: gadget: printer: fix infinite loop in printer_read()
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown
...
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD.
Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn
Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/
Fixes: 34765cbc67 ("iommufd: Associate fault object with iommufd_hw_pgtable")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But the
updating of the page_va[] is done before the nr_page_va is incremented
causing a build with CONFIG_UBSAN_BOUNDS to flag it as an overflow.
Move the increment of the counted by value before the array element is
updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked by
remote_events_dir_enable_write() where it would silently fail. Have it
check the return value and propagate that back up to user space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a close
callback to allow tracers to do clean up from trace_pipe open. The
trace_pipe close cleanup callback was added in 2009 but the mmiotrace
tracer was not updated. It had a hack to do the cleanup in the read call,
where it may leak if user space did not read the entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly dereference
that pointer. Fix the read call to check to see if that pointer is
populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt' atomic
variable share the same memory space in a union. The filter on module
logic only checked if the 'module' was set to determine if the event
belonged to the module. As dynamic events are always builtin, it doesn't
need the 'module' field of the structure and used a refcount. But the
module filtering logic would then mistaken these dynamic events as a
module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not check
it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing the
tests. But it does not reset the top level buffer. Dynamic events are only
added and removed by the top level so any left over dynamic events will
not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail. Reset
the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user space
into a per CPU buffer, disable preemption and enable migration again.
It checks if the per CPU context switch counter to see if it changed, and
if it did not, it would know that the per CPU buffer was not touched by
another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare will
always fail. The compare will promote the 32 bit int saved value to 64 bit
and compare it to the full 64 bit counter. Since the top 32 bits of the
saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another event
is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The trigger
itself is delayed by the "bulk delay" logic that was recently added.
But the code that frees the event_enable data used to rely on the trigger
code to do the synchronization. Now that the code uses the call RCU
functions (and a workqueue), that delay no longer is there.
Add a callback private_data_free() function that allows triggers to clean
up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This prevents
the event from trying to enable an event that no longer exists and cause a
use-after-free bug.
The ref counter was set back down when the trigger was removed but not
after thy synchronization phase. This could lead to the module data being
accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback of the
event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is allocated at
open and modified by writes. If multiple threads were to write to the
descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so, the
reads of user space enable preemption and disables it again. During this
time that preemption is enabled, the task can migrate. The perf event list
head is assigned via a per CPU pointer. It is done before the user space
part is called. If the user space reading migrates the task to another
CPU, then the head pointer is no longer valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCamYDGhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkhYAP9G5wDTVQQzitl900iWp9rvQ2Qm5UWN
JDnK2HO1elmj0AD8CRiHBI5W3O2yUmoO4bOFZ9YFXz+DqJ1jwkDs5FfqjAU=
=EMD9
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But
the updating of the page_va[] is done before the nr_page_va is
incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an
overflow.
Move the increment of the counted by value before the array element
is updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked
by remote_events_dir_enable_write() where it would silently fail.
Have it check the return value and propagate that back up to user
space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a
close callback to allow tracers to do clean up from trace_pipe open.
The trace_pipe close cleanup callback was added in 2009 but the
mmiotrace tracer was not updated. It had a hack to do the cleanup in
the read call, where it may leak if user space did not read the
entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup
properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly
dereference that pointer. Fix the read call to check to see if that
pointer is populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. The filter on
module logic only checked if the 'module' was set to determine if the
event belonged to the module. As dynamic events are always builtin,
it doesn't need the 'module' field of the structure and used a
refcount. But the module filtering logic would then mistaken these
dynamic events as a module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not
check it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing
the tests. But it does not reset the top level buffer. Dynamic events
are only added and removed by the top level so any left over dynamic
events will not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail.
Reset the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user
space into a per CPU buffer, disable preemption and enable migration
again. It checks if the per CPU context switch counter to see if it
changed, and if it did not, it would know that the per CPU buffer was
not touched by another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare
will always fail. The compare will promote the 32 bit int saved value
to 64 bit and compare it to the full 64 bit counter. Since the top 32
bits of the saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another
event is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The
trigger itself is delayed by the "bulk delay" logic that was recently
added. But the code that frees the event_enable data used to rely on
the trigger code to do the synchronization. Now that the code uses
the call RCU functions (and a workqueue), that delay no longer is
there.
Add a callback private_data_free() function that allows triggers to
clean up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This
prevents the event from trying to enable an event that no longer
exists and cause a use-after-free bug.
The ref counter was set back down when the trigger was removed but
not after thy synchronization phase. This could lead to the module
data being accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback
of the event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is
allocated at open and modified by writes. If multiple threads were to
write to the descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so,
the reads of user space enable preemption and disables it again.
During this time that preemption is enabled, the task can migrate.
The perf event list head is assigned via a per CPU pointer. It is
done before the user space part is called. If the user space reading
migrates the task to another CPU, then the head pointer is no longer
valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
* tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
tracing: Fix context switch counter truncation
selftests/ftrace: Reset triggers at top level before instance loop
tracing: Fix union collision of module and refcnt for dynamic events
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
tracing: Fix resource leak on mmiotrace trace_pipe close
tracing: Propagate errors from remote event bulk updates
tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer()
a bit more widely, because newer versions of LLVM started
optimizing it a bit better and introduced run-time relocations
in PIE code. (Nathan Chancellor)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3e+9
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Disable jump/lookup tables in the x86 boot decompressor code
a bit more widely, because newer versions of LLVM started
optimizing it a bit better and introduced run-time relocations
in PIE code (Nathan Chancellor)
* tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Disable jump tables
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Fixes: 08fdc8a013 ("buffer.c: call thaw_super during emergency thaw") [1]
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260723-work-super-emergency_thaw-v1-1-7c315c600245@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The LSUI futex implementation relies on a cmpxchg() loop to implement
FUTEX_OP_XOR, as the architecture doesn't provide unprivileged *EOR
atomics. Since the unprivileged 'CAST' instructions used to implement
the cmpxchg() can only operate on 64-bit memory locations, the
__lsui_cmpxchg32() helper function performs a song and dance to marshall
the 32-bit futex value into the correct part of a 64-bit register and
fill the remaining bytes with the neighbouring data.
A consequence of this structure is that the 'CAST' failure/success
condition ends up being split into two separate 32-bit checks across
__lsui_cmpxchg32() and its caller. This is a little fiddly to read and
introduces some additional local variables which can be avoided if the
check is done in one place.
Tweak __lsui_cmpxchg32() so that it performs the full 64-bit check on
the value returned from the 'CAST' instruction and returns success to
its caller only in the case that the cmpxchg() operation has succeeded.
With that in place, simplify the outer loop in __lsui_futex_atomic_eor()
to pass 'oldval' by reference and return unless the cmpxchg() operation
returns -EAGAIN. __lsui_futex_cmpxchg() then swallows the -EAGAIN if the
futex word has changed.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The challenge is passed in registers a1 through a8. However, copying to
®s.a1 makes FORTIFY treat the destination as the single a1 field,
resulting in a field-spanning write warning. [1]
Overlay the SMCCC register structure with an RSI-specific argument
layout and copy the challenge into an explicit 64-byte array. This keeps
the existing a1-a8 argument encoding while giving the copy a correctly
sized destination object.
[1]
memcpy: detected field-spanning write (size 64) of single field "®s.a1" at ./arch/arm64/include/asm/rsi_cmds.h:119 (size 8)
WARNING: ./arch/arm64/include/asm/rsi_cmds.h:119 at rsi_attestation_token_init+0xdc/0xf8 [arm_cca_guest], CPU#0: cat/3314
Fixes: b880a80011 ("arm64: rsi: Add RSI definitions")
Signed-off-by: Kohei Enju <enju.kohei@fujitsu.com>
Signed-off-by: Will Deacon <will@kernel.org>
We currently have a visibility column in the tables for the registers in
cpu-feature-registers.rst but this is always "y" for every register other
than ID_AA64PFR0_EL1. Given that the documentation of the full set of
bitfields is readily available in the architecture documentation it is
redundant for us to explicitly document things we don't advertise, and the
kernel documentation will inevitably lag the architecture.
Just remove the visibility column and hidden bitfields.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
In order to make it a bit easier to work with sort the list of registers in
cpu-feature-registers.rst lexically. There should be no content changes
resulting from this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
We have been rather lax in updating the list of visible bitfields in the
ID registers in cpu-feature-registers.rst, it is currently missing several
of the registers and quite a few bitfields in existing registers. Bring it
into sync with current -next.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
cpu-feature-regsters.rst documents the set of userspace visible ID
registers. At present the section for each register is numbered, this has
lead to the registers being documented in a haphazard order as new ones
have been added to the end of the list to avoid renumbering. Remove the
numbers so we can avoid this problem in future.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt.
Co-developed-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list.
Fixes: da3039e91d ("ALSA: timer: Forcibly close timer instances at closing")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/CA41AA48-75BF-45E9-A36D-3A5D2F124F60@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
