Modify test_sysfs_prop_optional_list to allow multi line parameters, in
order to comply with checkpatch output that limit line by 100 chars.
Allow use cases like:
test_sysfs_prop_optional_list \
property_name "value1","value2","val3","very_long_option"\
,"extra_long_option" \
,"even_more_data"
Signed-off-by: Boris Shtrasman <borissh1983@gmail.com>
Link: https://patch.msgid.link/20260625160556.54830-2-borissh1983@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a driver that decodes the Reset Status Register (RSR) of the
Freescale ColdFire MCF5441x Reset Controller Module at probe time
and exposes the cause via the power_on_reason sysfs ABI.
The RSR can latch several cause bits simultaneously (Reference
Manual chapter 12.3.2); the driver picks one cause per a priority
that favours the most explanatory diagnostic.
The register layout is described in the driver so it can be built
with COMPILE_TEST on any architecture.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Link: https://patch.msgid.link/20260617-coldfire-rcm-power-on-reason-v3-1-1a7c7b6b14e7@yoseli.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
cros_usbpd_charger_probe() reads two port counts from the EC and uses
one of them, num_charger_ports, as the loop bound when populating a
fixed-size array:
struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */
...
for (i = 0; i < charger->num_charger_ports; i++)
charger->ports[charger->num_registered_psy++] = port;
Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports
(from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The
only validation is a sanity check that compares the two EC-reported
values against each other:
if (num_charger_ports < num_usbpd_ports ||
num_charger_ports > num_usbpd_ports + 1)
return -EPROTO;
It never checks either count against EC_USB_PD_MAX_PORTS, the size of
the ports[] array. A malfunctioning, malicious or compromised EC that
reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for
example both 255) passes this check, and the loop then writes N pointers
into the 8-entry ports[] array embedded in the devm_kzalloc()'d
charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976
bytes): a slab out-of-bounds write.
Reject a port count larger than the ports[] array can hold.
Fixes: f68b883e8f ("power: supply: add cros-ec USBPD charger driver.")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260616-b4-disp-5e197080-v2-1-8aa5bffce945@proton.me
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
cros_pchg_probe() registers an EC event notifier whose callback uses the
devm-allocated charger_data via container_of(). The driver has no
remove callback and does not unregister the notifier, so the notifier
chain can retain a pointer to freed driver state after unbind or probe
cleanup.
Register a devm cleanup action immediately after the notifier is
installed so the notifier is unregistered before the driver state is
released. Also fail probe if the notifier cannot be registered, instead
of leaving a charger device that cannot receive EC events.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260615063105.39152-1-pengpeng@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The restart-handler binding documents "priority" as a uint32 value in
the range 0 to 255. The syscon reboot driver stored it in an int and
used the signed DT helper, which makes the helper type disagree with
the schema.
Read "priority" as u32 so the driver follows the binding while
preserving the same default value.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260612215325.1889302-1-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The battery drivers read properties whose bindings use signed values
for temperature thresholds and unsigned values for voltage thresholds.
Some helpers used the opposite signedness, which makes property type
checking report real mismatches.
Use signed helpers where the binding and DTS allow negative values, and
use unsigned helpers for voltage properties documented as uint32 cells.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612215308.1888834-1-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Convert the Microchip LAN78xx family (LAN7800, LAN7801, LAN7850) binding
documentation from plain text to DT schema.
Restoring a mistakenly deleted email in MAINTAINERS file and fixing
microchip,lan7800.yaml.
Signed-off-by: Mikhail Lukianchikov <avermoal@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712113821.12543-1-avermoal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Ethos-U85 supports an internal chaining buffer as temporary storage
between some operations. When chaining is activated, the IFM/OFM region
setting selects a chaining buffer rather than a region, and the IFM/OFM
base addresses don't matter. In this case, the feature matrix size
calculations should be skipped. Otherwise, the command stream will be
intermittently rejected depending on prior feature matrix base
addresses.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20260720231450.485221-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
There are 2 issues with the element size handling in the command stream
validation which result in too small of a size calculated when the
element size is 16/32/64 bits.
For NHWC format, the element size is simply missing from the
calculation.
The bitfield for the element size is different between IFM/IFM2 and
OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM
uses bits 1:2.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20260720231450.485221-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The macOS built-in SMB server returns STATUS_STOPPED_ON_SYMLINK for a
CREATE on a path whose final component is a symlink, but it does not
include a Symbolic Link Error Response in the error data: both
ErrorContextCount and ByteCount are zero, so the symlink target is not
present in the response at all. Per [MS-SMB2] section 2.2.2 such a
response should carry a valid Symbolic Link Error Response, so this is a
server bug, but the target can still be retrieved with
FSCTL_GET_REPARSE_POINT.
Frame from a capture against macOS 26.5.2 (build 25F84):
SMB2 hdr : Status=0x8000002d STATUS_STOPPED_ON_SYMLINK, Cmd=Create
Error Rsp: StructureSize=0x0009
Error Context Count: 0
Byte Count: 0
Error Data: 00
symlink_data() cannot find a struct smb2_symlink_err_rsp in such a
response and returns -EINVAL, which parse_create_response() propagates,
so smb2_query_path_info() bails out at
if (rc || !data->reparse_point)
goto out;
before it can retry with SMB2_OP_GET_REPARSE. stat(), readlink() and ls
of any server-side symlink then fail with -EINVAL:
$ ls -la Config
l????????? ? ? ? ? ? Config.json
$ stat Config/Config.json
stat: cannot statx 'Config/Config.json': Invalid argument
A 5.10 client resolves these symlinks correctly against the same server
and share, so this is a regression for Apple SMB servers.
Handle it in several places:
- symlink_data() detects the empty response (ErrorContextCount and
ByteCount both zero) and returns a distinct -ENODATA, so that "server
did not send the target" can be told apart from a genuinely malformed
response and only this case is worked around.
- parse_create_response() treats -ENODATA like
STATUS_IO_REPARSE_TAG_NOT_HANDLED, which does not carry the target
either: leave the reparse tag unset and clear rc, so the existing
SMB2_OP_GET_REPARSE path retrieves the target.
- smb2_query_path_info() only fixes up the symlink target type when the
target is already known. SMB2_OP_GET_REPARSE sets data->reparse.tag
but does not parse the target out of the reparse buffer; that happens
later, in reparse_info_to_fattr(). Without this check
smb2_fix_symlink_target_type() is called with a NULL target and
returns -EIO. This could not happen with servers that send the target
inline and therefore skip SMB2_OP_GET_REPARSE.
- smb2_open_file() maps -ENODATA to -EIO, matching
STATUS_IO_REPARSE_TAG_NOT_HANDLED, so its callers retrieve the target
with SMB2_OP_GET_REPARSE as well.
Tested on Debian 13, kernel 6.18.38 (armv7), against macOS 26.5.2:
symlinks now resolve, including relative, parent-traversing and directory
symlinks, and reads through symlinks succeed.
Cc: stable@vger.kernel.org
Co-developed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Carl Johnson <carl@jpartners.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is more preferred to use kstrto*() to parse a single number. The
function family properly returns an errno on error and is the correct
mechanism to parse data from sysfs.
The number base is set to 10 in order not to break the ABI.
Tested-by: Avraham Hollander <anhollander516@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260718-b4-acpi-battery-notification-v4-2-599c8ed1072f@rong.moe
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's a very common pattern to emit consecutive battery notifications,
for example:
Method (_Qxx, 0, NotSerialized)
{
Notify (BAT0, 0x80) // Status Change
Notify (BAT0, 0x81) // Information Change
}
In this case, the current code path will update battery state twice
within a short period, which is not optimal, as the same data are
fetched twice. Moreover, both notifications are likely to call
power_supply_changed(), causing power_supply_uevent() to read all
battery properties in order to assemble uevents. Even worse, after the
first uevent reaches userspace, some userspace processes start to read
all battery properties in order to refresh their internal states, which
competes with the second notification's handling and uevent assembling.
This generates significant pressure on _STA, _BST and _BIX/_BIF methods.
Not only that, power_supply_ext properties may also rely on some other
ACPI methods, so both uevent assembling and userspace processes call
them. It becomes a nightmare when all these methods share the same ACPI
mutex protecting EC accesses and hence vulnerable to lock starvation.
This is exactly the case of some Lenovo devices, where the mentioned EC
query pattern eventually leads to a catastrophic situation that a bunch
of ACPI methods (including but not limited to the mentioned ones) fail
to acquire the same mutex due to timeout. These devices don't handle
mutex acquisition failure gracefully and return garbage data, causing
even more chaos.
Improve battery notification handling by merging at most 16 consecutive
battery notifications within 10ms using a delayed work, so that they
only refresh and/or update battery state once. ACPI netlink event and
notifier call chain are still triggered multiple times in order not to
break other components. Finally, call power_supply_changed() once and
lead to a single uevent instead of a bunch, preventing userspace
programs from causing too much pressure on power supply properties and
underlying ACPI methods.
If more than 16 battery notifications are queued within 10ms, the
firmware/hardware is anyway buggy, and extra notifications will be
dropped.
Tested-by: Jeffrey Wälti <jeffrey@waelti.dev>
Tested-by: Avraham Hollander <anhollander516@gmail.com>
Reported-by: Rick <rickk1166@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221065
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260718-b4-acpi-battery-notification-v4-1-599c8ed1072f@rong.moe
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a test that reproduces the stale ACL bug fixed by:
"fs: preserve ACL_DONT_CACHE state in forget_cached_acl()"
A FUSE mount that does not negotiate FUSE_POSIX_ACL initialises inodes
with i_acl = ACL_DONT_CACHE. Before the fix, calling
forget_all_cached_acls() (e.g. from fuse_update_get_attr() on a
statx(AT_STATX_FORCE_SYNC)) would silently replace ACL_DONT_CACHE with
ACL_NOT_CACHED, enabling the kernel ACL cache. A subsequent getxattr
would populate the cache, and because fuse_set_acl() skips
forget_all_cached_acls() for !fc->posix_acl, later ACL changes were
not visible to callers — getxattr returned stale data.
The test mounts a minimal libfuse3 lowlevel filesystem (no
FUSE_POSIX_ACL negotiated) and:
1. Issues two getxattrs — both must reach the daemon, proving
ACL_DONT_CACHE suppresses caching before any trigger.
2. Calls statx(AT_STATX_FORCE_SYNC) to trigger forget_all_cached_acls().
3. Issues another getxattr (populates the cache on a buggy kernel).
4. Switches the daemon to a different-sized ACL (ACL_B).
5. Issues a final getxattr — expects ACL_B (44 bytes) and daemon
call count 4; a buggy kernel returns stale ACL_A (28 bytes).
fuse_acl_cache_test is only built when libfuse3 is detected via
pkg-config.
Christian Brauner <brauner@kernel.org> says:
Changed do_force_statx() to call the statx() libc wrapper instead of
syscall(SYS_statx, ...) as requested by Amir after review feedback from
Luis Henriques, and dropped the now unused <sys/syscall.h> include.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260713220932.413004-3-amir73il@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The ACL_DONT_CACHE state is meant to be a constant state for the inode
for filesystems that want to opt out of posix acl caching.
Commit facd61053c ("fuse: fixes after adapting to new posix acl api")
used this facility to opt out of posix acl caching for fuse inodes with
fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl).
The commit also takes care to gate the forget_all_cached_acls() call in
fuse_set_acl() on fc->posix_acl because there is no need for it, but
there are other placed in fuse code which call forget_all_cached_acls()
unconditional to fc->posix_acl and those cause the loss of the
ACL_DONT_CACHE state.
This is not only a functional bug. Properly timed, a get_acl() from this
fuse filesystem can return a stale cached value, as was observed in tests,
because set_acl() does not invalidate the unintentional acl cache.
We could fix this in fuse, but it actually makes no sense for the vfs
helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so
let it not do that to fix fuse and future users of ACL_DONT_CACHE.
Fixes: facd61053c ("fuse: fixes after adapting to new posix acl api")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260713220932.413004-2-amir73il@gmail.com
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
pdsc_init_pf() does not check whether create_singlethread_workqueue()
succeeded.
Fail probe on failure. The workqueue is set up before the timer and
mutexes, so its failure path must unwind only the earlier setup.
Fixes: c2dbb09043 ("pds_core: health timer and workqueue")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714212713.1788438-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's
pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler.
They serialize on config_lock, but neither guards the slot under it
correctly.
add() registers and stores a new auxiliary device without first checking
the slot, so a second add of an already-populated slot leaks the first
device. del() makes that check outside config_lock, so two concurrent
dels can both pass it; the first clears the slot, and the second
dereferences a NULL pointer.
Check and update the slot under config_lock in both paths.
Fixes: b699bdc720 ("pds_core: specify auxiliary_device to be created")
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714210745.1785625-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pdsc_process_adminq() and pdsc_process_notifyq() decide a completion is
valid from its ownership field - the color bit for the adminq, the event
id for the notifyq - then read the rest of the descriptor, with no
barrier in between.
On a weakly ordered architecture the CPU may read the payload first. Add
dma_rmb() between the ownership read and the payload reads.
Fixes: 7e82a8745b ("pds_core: Prevent race issues involving the adminq")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260714204145.1782390-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pdsc_adminq_wait_and_dec_once_unused() busy-waits for adminq_refcnt to
drop to one:
while (!refcount_dec_if_one(&pdsc->adminq_refcnt))
cpu_relax();
The refcount is held by pdsc_adminq_post() for the duration of an
in-flight command, which can wait up to devcmd_timeout seconds
(PDS_CORE_DEVCMD_TIMEOUT is 5) for the hardware to complete. cpu_relax()
is not a reschedule point, so on a non-preemptible kernel this loop can
spin on the CPU for several seconds, starving other tasks on that core.
Add cond_resched() to the loop so the waiter yields to other runnable
tasks while it polls, keeping cpu_relax() as the busy-wait hint between
checks.
Fixes: 7e82a8745b ("pds_core: Prevent race issues involving the adminq")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714201456.1776153-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikhil P. Rao says:
====================
pds_core: fix use-after-free on workqueue during remove
This series fixes a use-after-free on the workqueue during driver remove.
Patch 1 fixes a pre-existing deadlock between the PCI reset worker and
pdsc_remove() that was identified during review of v1.
Patch 2 is the reworked UAF fix that moves destroy_workqueue() after
pdsc_teardown() and adds proper work synchronization.
====================
Link: https://patch.msgid.link/20260714180223.1642792-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://patchwork.kernel.org/comment/27002369/
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260714180223.1642792-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_reset_function() acquires device_lock before performing the reset.
pdsc_remove() is called by the PCI core with device_lock already held.
If pdsc_pci_reset_thread() is running when pdsc_remove() is called,
destroy_workqueue() will block waiting for the work to complete, while
the work is blocked waiting for device_lock - deadlock.
Use pci_try_reset_function() which uses pci_dev_trylock() internally.
This acquires both the device lock and the PCI config access lock
without blocking - if either lock is contended, it returns -EAGAIN
immediately. This avoids the deadlock while also ensuring proper
config space access serialization during the reset.
The pci_dev_get/put calls are also removed as they were unnecessary -
the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing
the work completes before remove returns. The PCI core holds its
reference to pci_dev throughout the entire unbind sequence.
Fixes: 81665adf25 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://patchwork.kernel.org/comment/27002369/
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260714180223.1642792-2-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After picking up some pending patches for the kernel to work on, I
realized my name in the mailmap file somehow got mixed up. When
switching to my kernel.org Address some time ago, I had never the
intention to use a scrambled variant of Polish and German used for my
first name to be found in this file. However, so here we are. Lets fix
it for good.
Signed-off-by: Michael Grzeschik <mgr@kernel.org>
Link: https://patch.msgid.link/20260713-mailmap-v1-1-cb40979cb190@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the
capacity limit for ep->auth_chunk_list, allowing it to hold up to
20 chunk entries (param_hdr.length up to 24). However, the copy
destination asoc->c.auth_chunks in struct sctp_cookie is only
SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16
chunks are added, sctp_association_init() memcpy overflows the
destination by up to 4 bytes.
Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching
the destination capacity.
Fixes: 1f485649f5 ("[SCTP]: Implement SCTP-AUTH internals")
Signed-off-by: HanQuan <eilaimemedsnaimel@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260713032021.3491702-1-zhoujian.zja@antgroup.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The inclusion of <linux/kconfig.h> is unneeded as it's guaranteed by
the build starting from the commit 2a11c8ea20 ("kconfig: Introduce
IS_ENABLED(), IS_BUILTIN() and IS_MODULE()"). Remove it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260717171635.1783543-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Yuyang Huang says:
====================
align IPv4 teardown with IPv6 and fix driver regressions
This series aligns the IPv4 address teardown sequence with IPv6 by clearing
dev->ip_ptr early in inetdev_destroy() before freeing the multicast list and
individual IP addresses. This prevents RCU readers from accessing
a partially destroyed in_device structure.
However, clearing dev->ip_ptr early causes __in_dev_get_rtnl() to return
NULL during the notifier loop in inetdev_destroy(). This causes regressions
in some drivers (prestera and mac80211) that use this lookup helper
in their inetaddr notifier callbacks.
To prevent regressions and maintain bisectability, this series first
fixes the affected drivers (Patch 1 and 2) before applying the core
IPv4 change (Patch 3).
An audit was performed on all other registered inetaddr and inet6addr
notifier listeners, and no other drivers were found to be affected.
====================
Link: https://patch.msgid.link/20260711005405.2861680-1-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prevent RCU readers from accessing a partially destroyed in_device,
clear dev->ip_ptr early in inetdev_destroy() before freeing the
multicast list and individual IP addresses. This aligns the IPv4 teardown
sequence with the IPv6 implementation.
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260711005405.2861680-4-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During address teardown, the netdevice's ip_ptr might be cleared before
the inetaddr notifier is called. In this case, __in_dev_get_rtnl()
returns NULL, causing the notifier to abort early and fail to update
the ARP filter.
Fix this by using the in_device pointer from the event argument
(ifa->ifa_dev) which is guaranteed to be valid.
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20260711005405.2861680-3-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During address teardown, the inetaddr notifier may be called multiple
times for the same interface. Ignore NETDEV_DOWN events if the RIF has
already been destroyed, rather than returning -EEXIST, which aborts the
notifier chain.
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20260711005405.2861680-2-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Perfect FDIR filters can be added while the interface is down and are
kept on the software list for later restore. unregister_netdev() only
calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in
txgbe_close() is skipped in that case and the filters are leaked on
driver remove. Free the filter list from txgbe_remove() as well.
Fixes: 4bdb441105 ("net: txgbe: support Flow Director perfect filters")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260713091911.1614795-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow modern style of defining ACPI IDs by using C99 initialisers.
This is a missing part to bigger rework that's ongoing in the kernel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260717170951.1782863-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260717170951.1782863-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kuan-Wei Chiu says:
====================
riscv, bpf: Add support for signed operations and 32-bit atomics
Add support for missing signed operations and 32-bit atomics in the
RV32 BPF JIT compiler.
The current implementation lacks support for BPF_SDIV, BPF_SMOD, and
BPF_MOVSX, ignoring the instruction offset field and treating them as
unsigned or zero-extended. Introduce support for these operations by
checking the offset field and emitting the corresponding instructions.
Additionally, we leverage the mandatory A extension to natively support
32-bit BPF atomics (and, or, xor, xchg) by mapping them directly to
amo*.w instructions. BPF_CMPXCHG continues to fall back to the
interpreter.
As a result, test_bpf.ko now runs with 0 failures, and the total number
of successfully JIT'ed test cases increases from 843 to 902.
Tested-by: Pu Lehui <pulehui@huawei.com>
---
Changes in v4:
- Add a 'dst' param to emit_bpf_atomic().
Changes in v3:
- Pass insn directly to emit_alu_r32().
- Remove the Fixes: tag and update title.
- Consolidate size, mode, and off into insn for emit_store_r64().
Changes in v2:
- Add missing Fixes tags.
- Fix memory ordering by emitting aq=1, rl=1
Kuan-Wei Chiu (3):
riscv, bpf: Add support for BPF_SDIV and BPF_SMOD in RV32 JIT
riscv, bpf: Add support for BPF_MOVSX in RV32 JIT
riscv, bpf: Add 32 bit atomic operations to RV32 JIT
arch/riscv/net/bpf_jit_comp32.c | 111 +++++++++++++++++++++++++++-----
1 file changed, 95 insertions(+), 16 deletions(-)
====================
Link: https://patch.msgid.link/20260714002451.4091139-1-visitorckw@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The RV32 BPF JIT compiler currently only supports the BPF_ADD atomic
operation. Other 32 bit atomic operations (and, or, xor, xchg) and
their BPF_FETCH variants are not supported and gracefully fall back to
the interpreter.
Since the RISC-V A extension is required for Linux on RV32, we can
natively support these 32-bit BPF atomic operations by mapping them
directly to the corresponding RISC-V amo*.w instructions.
Implement BPF_ADD, BPF_AND, BPF_OR, BPF_XOR, and BPF_XCHG with and
without BPF_FETCH. BPF_CMPXCHG requires a more complex lr.w/sc.w
loop and is left to fall back to the interpreter.
Before this patch:
[ 138.862161] test_bpf: Summary: 1054 PASSED, 0 FAILED, [843/1042 JIT'ed]
After this patch:
[ 157.024124] test_bpf: Summary: 1054 PASSED, 0 FAILED, [902/1042 JIT'ed]
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/bpf/20260714002451.4091139-4-visitorckw@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
I will post Card capsuling patch.
To makes its review easy, tidyup mediatek drivers to reduce
un-related diff as preparation.
No functional change, but is preparation for cleanup driver.
Link: https://patch.msgid.link/8733xdjfdq.wl-kuninori.morimoto.gx@renesas.com
static int mt8365_mt6357_dev_probe(...)
{
...
struct device *dev = card->dev;
...
=> card->dev = dev;
...
}
This is useless. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/87wlupi0sg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to declarate mt8196_nau8825_soc_card. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/87y0f5i0sl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have for_each_card_prelinks(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/87zezli0sp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
use *dev, instead of card->dev.
No functional change, but is preparation for cleanup driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/871pcxjfd9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of multiple BERT ACPI tables, one gets:
sysfs: cannot create duplicate filename '/firmware/acpi/tables/data/BERT'
This is because both:
/firmware/acpi/tables/BERT1
/firmware/acpi/tables/BERT2
are attempted to be mapped to the same data table:
/firmware/acpi/tables/data/BERT
Address this problem by passing and using the same filename for data
tables.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Reported-by: Michal Suchanek <msuchanek@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1270211
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260717065129.72924-3-trenn@suse.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The structure representing BERT data is struct acpi_bert_region, so its
size should be used in the BERT region size check.
Update the code in question accordingly.
Signed-off-by: Thomas Renninger <trenn@suse.de>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260717065129.72924-2-trenn@suse.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst
is never initialized because inet6_init() exits before addrconf_init()
is called to initialize it. An attempt to bind an RDS socket to
an ipv6 address results in a crash in __ipv6_chk_addr_and_flags()
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0
Call Trace:
<TASK>
ipv6_chk_addr+0x3b/0x50
rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp]
rds_trans_get_preferred+0x15d/0x2d0 [rds]
? trace_hardirqs_on+0x2d/0x110
rds_bind+0x1433/0x1d60 [rds]
? rds_remove_bound+0xd50/0xd50 [rds]
? aa_af_perm+0x250/0x250
? __might_fault+0xde/0x190
? __sys_bind+0x1dc/0x210
__sys_bind+0x1dc/0x210
? __ia32_sys_socketpair+0x100/0x100
? restore_fpregs_from_fpstate+0x53/0x100
__x64_sys_bind+0x73/0xb0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f47f8269ea9
</TASK>
The following code reproduces the issue:
struct sockaddr_in6 addr;
s = socket(PF_RDS, SOCK_SEQPACKET, 0);
memset(&addr, 0, sizeof(addr));
inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(PORT);
bind(s, &addr, sizeof(addr));
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: eee2fa6ab3 ("rds: Changing IP address internal representation to struct in6_addr")
Fixes: 1e2b44e78e ("rds: Enable RDS IPv6 support")
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260709162723.367523-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 9b97b6b563 ("net: txgbe: support getting module EEPROM by page")
Link: https://patch.msgid.link/20260713085111.1481884-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with
list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs
from the encap receive softirq (via tipc_udp_rcast_disc()) without
rtnl_lock(), so it can race the cleanup delete and corrupt the list:
list_del corruption. prev->next should be ffff8880298d7ab8,
but was ffff88802449ad38. (prev=ffff888027e3ec98)
kernel BUG at lib/list_debug.c:62!
RIP: __list_del_entry_valid_or_report+0x17a/0x200
Workqueue: events cleanup_bearer
Call Trace:
cleanup_bearer (net/tipc/udp_media.c:811)
process_one_work (kernel/workqueue.c:3302)
worker_thread (kernel/workqueue.c:3466)
The bearer can be enabled from an unprivileged user namespace, as the
TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM.
Add a spinlock to struct udp_bearer and take it around the list_add_rcu()
in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so
the two writers can no longer corrupt the list.
Reject a duplicate peer under the same lock before allocating, and remove
tipc_udp_is_known_peer(). The old lockless pre-check in
tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer
could both find it absent and add it twice.
cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the
bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add()
and add a peer after cleanup_bearer() has already emptied the list, leaking
that entry when the bearer is freed. Mark the bearer disabled under
rcast_lock once the list is emptied and refuse further additions.
Fixes: ef20cd4dd1 ("tipc: introduce UDP replicast")
Reported-by: Xiang Mei <xmei5@asu.edu>
Suggested-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260716025203.9332-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission.
Fixes: d6e882b89f ("rtase: Implement .ndo_start_xmit function")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709103456.83789-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When pKVM injects a synchronous exception into a protected guest,
enter_exception64() reads SCTLR_EL1 to set the new PSTATE's PAN and
SSBS bits. pKVM refreshes VBAR_EL1 from the live value before injecting
but not SCTLR_EL1, which is untrapped for protected guests, so a guest
that updates it and then traps takes the exception with stale PAN/SSBS.
Sync SCTLR_EL1 alongside VBAR_EL1.
Fixes: 798eb59787 ("KVM: arm64: Sync protected guest VBAR_EL1 on injecting an undef exception")
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Link: https://patch.msgid.link/20260721161624.3983041-1-fuad.tabba@linux.dev
Signed-off-by: Oliver Upton <oupton@kernel.org>
