In max8998_pmic_dt_parse_pdata(), of_get_child_by_name() acquires a
reference on reg_np which is then stored in rdata->reg_node, transferring
ownership to the regulator data array. The subsequent of_node_put(reg_np)
at the end of the function releases the last matched regulator node's
reference, leaving rdata->reg_node as a dangling pointer for the last
entry.
Remove the spurious of_node_put(reg_np) call.
Cc: stable@vger.kernel.org
Fixes: 156f252857 ("drivers: regulator: add Maxim 8998 driver")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260626160326.54457-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list.
Fixes: f29dd55b02 ("rdma/siw: queue pair methods")
Link: https://patch.msgid.link/r/20260630060040.966461-1-ruoyuw560@gmail.com
Suggested-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove extra asterisk to avoid the following kernel-doc warning:
Warning: drivers/infiniband/hw/mlx5/umr.c:986 This comment starts with '/**',
but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
Fixes: e73242aa14 ("RDMA/mlx5: Optimize DMABUF mkey page size")
Link: https://patch.msgid.link/r/20260629-kdoc-fix-v1-1-735a90dede7f@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put.
Cc: stable@vger.kernel.org
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260625113239.49764-1-vulab@iscas.ac.cn
Add a blank line after variable declarations and remove multiple blank
line across HID sensor IIO drivers to improve readability and align
with kernel coding style.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.
Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).
The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.
Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.
Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).
The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.
Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.
Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).
The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.
Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In hns_roce_cleanup_mhop_hem_table(), the expression:
obj = i * buf_chunk_size / table->obj_size;
is evaluated using 32-bit unsigned arithmetic because
'buf_chunk_size' is u32 and the usual arithmetic conversions convert
'i' to unsigned int. The result is assigned to a u64 variable, but the
multiplication may overflow before the assignment.
For sufficiently large HEM tables, this produces an incorrect object
index passed to hns_roce_table_mhop_put().
Cast 'i' to u64 before the multiplication so that the intermediate
calculation is performed with 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Link: https://patch.msgid.link/r/20260627095951.51378-1-listdansp@mail.ru
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the zero CQE validation before rdma_zalloc_drv_obj() to avoid
leaking the CQ object when returning -EINVAL.
Fixes: a291758288 ("RDMA/core: Reject zero CQE count")
Link: https://patch.msgid.link/r/20260625020148.224537-1-zhaochenguang@kylinos.cn
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mana_ib_post_send() returns err after walking the send work request list.
If the caller passes an empty list, the loop is skipped and err is not
assigned.
Initialize err to 0 so an empty send work request list returns success
instead of stack data.
Fixes: c8017f5b48 ("RDMA/mana_ib: UD/GSI work requests")
Link: https://patch.msgid.link/r/20260618041752.481193-2-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
erdma_post_recv() returns ret after walking the receive work request list.
If the caller passes an empty list, the loop is skipped and ret is not
assigned.
Initialize ret to 0 so an empty receive work request list returns success
instead of stack data.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Link: https://patch.msgid.link/r/20260618041752.481193-1-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix several comment misspellings across drivers/iio/imu/, found with
codespell and manual review. The corrected words are coefficient,
temperature, sensitivity, access, chosen, and buses.
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Kconfig entry for the AD7779 is missing a
'select IIO_TRIGGERED_BUFFER' parameter, causing build failures.
Fixes: c9a3f8c7bf ("drivers: iio: adc: add support for ad777x family")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260617164013.280790-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Reviewed-by: David Hu <xuehaohu@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
devm_request_irq() already prints an error message on failure via the
IRQ core, so wrapping its return value in dev_err_probe() results in a
duplicate error message. Return the error directly instead.
Suggested-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
xe_vm_populate_pgtable() indexed the source PTE array (update->pt_entries)
by the per-call loop counter, assuming each call starts at the first entry
of the update. That holds for the CPU bind path
(xe_migrate_update_pgtables_cpu), which populates a whole update in a single
call, but not for the GPU bind path: write_pgtable() splits an update into
MAX_PTE_PER_SDI (510) sized MI_STORE_DATA_IMM chunks, invoking the populate
callback once per chunk with an advancing qword_ofs but a fresh command-
buffer destination pointer.
As a result, every chunk after the first re-read pt_entries from index 0
instead of from its true offset, so PTEs beyond the first 510 entries of a
single update were programmed with the wrong physical pages, shifting the
mapping by exactly MAX_PTE_PER_SDI pages.
This stayed latent because a single update only exceeds 510 qwords when a
large (e.g. 2M) region is bound as individual 4K PTEs rather than a single
huge-page entry, which happens when the backing store is sufficiently
fragmented. It was surfaced by the BO defrag path, which deliberately
rebinds such fragmented ranges via the GPU bind path, producing
deterministic data corruption offset by 510 pages.
Index pt_entries by the chunk's absolute offset relative to update->ofs so
both the CPU and GPU paths pick the correct entries.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Assisted-by: GitHub_Copilot:claude-opus-4.8
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260702012434.3861171-1-matthew.brost@intel.com
struct ad7779_state contains a completion field that is initialized
in ad7779_setup_without_backend() but never waited on or signaled
anywhere in the driver. Remove the dead code.
Suggested-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix several comment typos in industrialio-backend.c: correct "through"
in a channel-spec comment, "initiates a process" in the activation
comment, and drop a stray apostrophe from "Gets" in two getter
kerneldoc comments.
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The original commit missed that three drivers (mthca, irdma, siw) have UHW
data associated with reg_mr that cannot be passed through the ioctl. They
also assume that the udata cannot be NULL, so failing to pass a valid
udata can trigger a NULL udata crash in those drivers.
This never happens in real systems since in rdma-core ibv_cmd_reg_mr_ex()
does not accept a udata and those three drivers don't use it, however a
malicious userspace could trigger it.
Cc: stable@vger.kernel.org
Fixes: 5b2e45049d ("IB/core: Add UVERBS_METHOD_REG_MR on the MR object")
Reported-by: Jacob Moroni <jmoroni@google.com>
Closes: https://lore.kernel.org/all/CAHYDg1TOGxRGZrS69d4Y--Shj_DZv0nJuM73iHUBwBM70g_t3Q@mail.gmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tighten type validation during policy load to improve robustness in
the face of ill-formed policies.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Implement support for the Silergy SY7758 6-channel High Efficiency LED
Driver used for backlight brightness control in the Ayaneo Pocket S2
dual-DSI panel.
Signed-off-by: KancyJoe <kancy2333@outlook.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260529-topic-sm8650-ayaneo-pocket-s2-sy7758-v5-2-03aacd49747c@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Document the Silergy SY7758 6-channel High Efficiency LED Driver
used for backlight brightness control.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260529-topic-sm8650-ayaneo-pocket-s2-sy7758-v5-1-03aacd49747c@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Instead of sizing sruntime[] with a hardcoded SWRM_MAX_DAIS constant,
allocate it at probe time once the actual port count is known from
hardware. This removes the need to keep the constant in sync with
dt-binding limits and naturally supports any future port count increase.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude Sonnet 4.6
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701193006.4113-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
find_first_zero_bit(mask, n) returns n (not n+1) when all bits are set,
so the guard `pn > maxport` is never true on exhaustion. The driver
would silently call set_bit(maxport, port_mask) and assign the
out-of-range port instead of returning -EBUSY. Fix the comparison to
`pn >= maxport`.
Fixes: 02efb49aa8 ("soundwire: qcom: add support for SoundWire controller")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude Sonnet 4.6
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701193006.4113-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The btf_vlen(), btf_kind() and btf_kflag() inline helpers defined in
tools/lib/bpf/btf.h are thin wrappers around the BTF_INFO_VLEN(),
BTF_INFO_KIND() and BTF_INFO_KFLAG() UAPI macros - each one simply
returns the corresponding macro applied to t->info.
bpftool already uses these helpers in most places, but 13 call sites
in btf.c and btf_dumper.c still open-code the raw macros. Use the
helpers consistently, matching the rest of bpftool as well as libbpf.
No functional change.
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20260702012311.2265001-1-luoliang@kylinos.cn
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference.
Cc: stable@vger.kernel.org
Fixes: bc407334e9 ("regulator: as3722: add regulator driver for AMS AS3722")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260626160150.54291-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The only variant supported by the binding now, the DC8200 controller on
T-Head TH1520, requires three reset lines.
Add the reset properties to the required list to clarify this. The
in-tree th1520.dtsi file isn't affected by this change because the reset
lines are already populated there.
The driver still considers the resets optional, so if another variant
with no reset line appears, only the binding needs tweaking.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260702054804.164820-1-zhengxingda@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth: virtio_net: disable cb when NAPI is busy-polled
- eth: lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth: mlx5e: fix use-after-free of metadata_dst on RX SC delete
- eth: enetc: check the number of BDs needed for xdp_frame
- eth: fbnic: don't cache shinfo across skb realloc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=E5mR
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
* Add MFD mailing list to MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=9mYD
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
- Add MFD mailing list to MAINTAINERS
* tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
MAINTAINERS: Add a mailing list entry to MFD
BAM version 1.6.0 and later changed the behavior of the mask field in
command elements for read operations.
In older BAM versions, or prior implementation assumptions, the mask
field was effectively ignored for read commands. However, starting from
BAM v1.6.0, the mask field for read commands is repurposed to carry the
upper 4 bits of the destination address, enabling support for 36-bit
addressing. For write commands, the mask field continues to function as
a traditional write mask.
The current driver sets mask = 0xffffffff for all command elements.
While this works for write operations, it breaks read operations on
BAM v1.6.0+ hardware. In such cases, the hardware interprets the upper
address bits as 0xf, resulting in an invalid destination address
(0xf_xxxxxxxx instead of 0x0_xxxxxxxx).
This leads to failures such as NAND enumeration issues observed on
platforms like IPQ5424.
Fix this by assigning the mask field based on command type:
- For read commands: set mask = 0 (upper address bits = 0)
- For write commands: retain mask = 0xffffffff
Also update the bam_cmd_element structure documentation to reflect the
dual purpose of the mask field across BAM versions.
This ensures correct behavior on BAM v1.6.0+ while maintaining backward
compatibility with older hardware.
Fixes: dfebb055f7 ("dmaengine: qcom: bam_dma: wrapper functions for command descriptor")
Tested-by: Lakshmi Sowjanya D <lakshmi.d@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260615060908.1263171-1-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
init_pl330_debugfs() creates a debugfs file with struct pl330_dmac as
private data. pl330_remove() then unregisters the DMA device and frees
the PL330 channel/thread state without removing that file.
Keep the debugfs dentry and remove it before tearing down the DMAC state
used by the debugfs show callback.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260615091645.28878-1-pengpeng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When writing the lli->ctl_hi, this is an __le32 type so the
value being orred should be convered to __le32 by cpu_to_le32.
Fixes 1deb96c0fa ("dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()")
--
Note, the call to axi_chan_irq_clear() is passing lli->status_lo
through which is also an __le32 but it does not seem to be set
anywhere. Is this also a bug?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260617084944.705266-1-ben.dooks@codethink.co.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The IIO subsystem convention requires that the file permission
(_mode) parameter be the first argument of IIO_DEV_ATTR_* macros.
The dds.h macros had _mode after _channel, causing checkpatch to
misinterpret the channel number as a permission value.
Reorder the parameters so _mode is first, matching the convention
established by IIO_DEV_ATTR_SAMP_FREQ in include/linux/iio/sysfs.h.
Where _mode is hard coded, make it a parameter in the interests
of consistency and update all callers to match previously hard coded
value.
Update all callers in ad9834.c and ad9832.c accordingly.
Compile tested.
Signed-off-by: Xiaofeng Yuan <xiaofengmian@163.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for reading and writing the oversampling ratio through
the IIO oversampling_ratio attribute. The hardware supports averaging
2, 4, 8, or 16 samples, plus a ratio of 1 (no averaging).
Temperature and supply channels share oversampling configuration at
the type level (all temperature channels share one ratio, all supply
channels share another), exposed through info_mask_shared_by_type.
The hardware encoding uses sample_count / 2 in a 4-bit field within
the CONFIG register. Per-channel averaging enable registers must also
be updated to activate or deactivate averaging.
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add threshold event support for temperature and supply voltage
channels.
Temperature events:
- Rising threshold with configurable value on the device
temperature channel (current max across all satellites)
- Per-channel hysteresis as a millicelsius value
- Event direction is IIO_EV_DIR_RISING (hysteresis mode)
Supply voltage events:
- Rising/falling threshold per supply channel
- Per-channel alarm enable via alarm configuration registers
The hardware supports both window and hysteresis alarm modes for
temperature. This driver uses hysteresis mode, where the upper
threshold triggers the alarm and the lower threshold clears it
(re-arm point). The hardware has a single ISR bit per temperature
channel with no indication of which threshold was crossed, so
hysteresis mode is the natural fit. The lower threshold register
is computed internally as (upper - hysteresis).
Hysteresis is stored in the driver as a millicelsius value,
initialized from the hardware registers at probe. Writing the
rising threshold or hysteresis recomputes the lower register.
ALARM_CONFIG is hard-coded to hysteresis mode during init.
The hardware also provides a separate over-temperature (OT)
threshold, but it is not exposed through IIO as it serves as a
hardware safety mechanism for platform shutdown. OT will be
exposed through the thermal framework in a follow-up series.
The interrupt handler masks active threshold interrupts (which are
level-sensitive) and schedules a delayed worker to poll for condition
clear before unmasking. When no hardware IRQ is available, event
specs are not attached and interrupt init is skipped, since the
I2C regmap backend cannot be called from atomic context.
When disabling a supply channel alarm, the group interrupt remains
active if any other channel in the same alarm group still has an
alarm enabled.
A devm cleanup action masks all interrupts on driver unbind to
prevent unhandled interrupt storms after the IRQ handler is freed.
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add an I2C transport driver for the Versal SysMon block. The SysMon
provides an I2C slave interface that allows an external master to
read voltage and temperature measurements through the same register
map used by the MMIO path.
The I2C command frame is an 8-byte structure containing a 4-byte data
payload, a 2-byte register offset, and a 1-byte instruction field.
Read operations send the frame with a read instruction, then receive
a 4-byte response containing the register value.
Events are not supported on the I2C path because there is no
interrupt line and the I2C regmap backend cannot be called from
atomic context.
Co-developed-by: Conall O'Griofa <conall.ogriofa@amd.com>
Signed-off-by: Conall O'Griofa <conall.ogriofa@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add the core driver and MMIO platform driver for the AMD/Xilinx Versal
System Monitor (SysMon) block.
The SysMon block resides in the platform management controller (PMC) and
provides on-chip voltage and temperature monitoring through a 10-bit,
200 kSPS ADC. It can monitor up to 160 voltage channels and 64
temperature satellites distributed across the SoC, with a consistent
sample rate of 8 kSPS per channel regardless of how many channels are
enabled.
The hardware also provides four aggregate temperature registers that
are always present regardless of the device tree configuration: the
current max and min across all active satellites, and the peak and
trough values recorded since the last hardware reset.
The driver is split into two compilation units:
- versal-sysmon-core: Channel parsing, IIO registration, read_raw
- versal-sysmon: MMIO platform driver with custom regmap accessors
Voltage results are stored in a 19-bit modified floating-point format
and converted to millivolts. Temperature results are stored in Q8.7
signed fixed-point Celsius format and converted to millicelsius.
The MMIO regmap backend uses a custom reg_write accessor that
automatically unlocks the NPI (NoC programming interface) lock
register before each write, as required by the hardware. The regmap
is configured with fast_io since the underlying MMIO accessors are
safe to call from atomic context.
Co-developed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add devicetree binding for the AMD/Xilinx Versal System Monitor (SysMon).
The Versal SysMon is the successor to the Zynq UltraScale+ AMS block,
providing on-chip voltage and temperature monitoring. The hardware
supports up to 160 supply voltage measurement points and up to 64
temperature satellites distributed across the SoC, with configurable
threshold alarms and oversampling. The device can be accessed via
memory-mapped I/O or via an I2C interface.
Supply and temperature channels are described as child nodes under
container nodes, referencing the standard adc.yaml binding for
channel properties.
Co-developed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The I2C driver provides chip_info through both the OF match table and
the I2C id table, but probe reads it with device_get_match_data(). That
misses id-table driver_data for non-firmware I2C matches and can reject
a supported device with -ENODEV.
Use i2c_get_match_data() so the id-table chip_info is used when firmware
match data is not present.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reorder headers includes following IIO subsystem preferences.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mt6323 AUXADC is a 15-bit ADC used for system monitoring. This driver
provides support for reading various channels including battery and
charger voltages, battery and chip temperature, current sensing and
accessory detection.
Add a driver for the AUXADC found in the MediaTek mt6323 PMIC.
Tested-by: Ben Grisdale <bengris32@protonmail.ch> # Amazon Echo Dot (2nd Generation)
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The MediaTek mt6323 PMIC includes an AUXADC used for battery voltage,
temperature, and other internal measurements. The IP block is not
register-compatible with mt6359.
Add the devicetree binding documentation and the associated header file
defining the ADC channel constants.
Also change the description to 'MT6350 series and similar' because
the binding already includes more than mt635x series PMICs.
Finally, add the MAINTAINERS entry for the header with ADC constants.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rename XILINX_DMA_LOOP_COUNT to XILINX_DMA_POLL_TIMEOUT_US because it is
a timeout value, not a loop count for polling register in microseconds.
No functional changes.
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Signed-off-by: Alex Bereza <alex@bereza.email>
Link: https://patch.msgid.link/20260402-fix-atomic-poll-timeout-regression-v4-2-f30d6a6c13cb@bereza.email
Signed-off-by: Vinod Koul <vkoul@kernel.org>
