ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header.
Fixes: 4cf476ced4 ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260908072135.877364-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) {
if (info->options_len < sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains
pointing to _md. Later, vxlan_build_skb() is called with md, which
eventually calls vxlan_build_gbp_hdr():
if (vxflags & VXLAN_F_GBP)
vxlan_build_gbp_hdr(vxh, md);
Inside vxlan_build_gbp_hdr(), md->gbp is read:
if (!md->gbp)
return;
gbp = (struct vxlanhdr_gbp *)vxh;
...
if (md->gbp & VXLAN_GBP_DONT_LEARN)
gbp->dont_learn = 1;
If the stack contains garbage, this causes:
1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header.
2) gbp->dont_learn and gbp->policy_applied to be set from stack bits.
3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data,
leaking it onto the wire.
Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not
present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early
without modifying the VXLAN header.
Fixes: ee122c79d4 ("vxlan: Flow based tunneling")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260906180111.1973188-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler
queues via otx2_qos_txschq_set_parent_topology(), but teardown freed
those queues without clearing TOPOLOGY. The AF only restores PARENT and
SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the
shared scheduler pool and affect later allocations.
Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero
TL4 through TL2 TOPOLOGY before each schq is returned to the AF during
hierarchy teardown and cfg rollback. Skip the aggregation level (TL1):
it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs,
and is not freed back to the AF by nix_txschq_free_one().
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260903020533.3068041-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver registers 26 temperature channels, all advertising
HWMON_T_ENABLE, and indexes the enable bitmap with the raw channel:
data->hwmon_en.tin_en[channel / 8] |= BIT(channel % 8);
tin_en is two bytes and only covers the 5 THR and 5 TDP channels
(index 0-9). The 16 DTIN channels (index 10-25) are enabled by the
firmware and were never meant to carry an enable bit. Because the
control structure is packed, writing temp17_enable and above indexes
past tin_en into the fin_en bytes that follow it, so it toggles fan
enable state instead; nct6694_hwmon_init() then sends the whole
structure back to the device, and reads report fan state as temperature
state. It stays within the structure, so this is not a memory safety
problem, but on a board that uses the fan channels it is not harmless.
Give the DTIN channels a temperature config without HWMON_T_ENABLE so
the core never creates their enable attribute. The enable path is then
reachable only for the first 10 channels, which stay within tin_en, and
fin_en is left alone. The DTIN input and limit attributes are unchanged.
Fixes: 197e779d29 ("hwmon: Add Nuvoton NCT6694 HWMON support")
Suggested-by: Ming Yu <tmyu0@nuvoton.com>
Link: https://lore.kernel.org/all/20260802124730.20387-1-ali@iusegentoo.com/
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Link: https://patch.msgid.link/20260803102148.14196-1-ali@iusegentoo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
rog_ryujin_execute_cmd() holds status_report_request_lock while
reinitializing a completion, intending to exclude raw-event handling.
However, rog_ryujin_raw_event() does not acquire the lock when it updates
the completion. A response can therefore race with reinit_completion() and
be lost, leaving the command to time out.
Hold the lock while parsing reports and updating their completions. Use the
irqsave variants in both paths because raw-event handling may run in
interrupt context.
Fixes: ed3e03790c ("hwmon: Add driver for ASUS ROG RYUJIN II 360 AIO cooler")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260812104617.858D01F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Link: https://patch.msgid.link/20260904022129.97896-3-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
rog_ryujin_raw_event() parses response headers and payload fields without
first checking that they are present in the received report. A short report
can therefore make the driver consume uninitialized bytes from the HID
transport buffer and expose them as sensor values through sysfs.
Validate the response header and the fields used by each response type
before parsing them.
Fixes: ed3e03790c ("hwmon: Add driver for ASUS ROG RYUJIN II 360 AIO cooler")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260812104617.858D01F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Link: https://patch.msgid.link/20260904022129.97896-2-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260708031612.BD7E61F000E9@smtp.kernel.org/
Fixes: 5997eb60f8 ("hwmon: (corsair-cpro) Add firmware and bootloader information")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260828061949.3151191-1-lilinmao@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
aspeed_pwm_tacho_probe() installs its reset cleanup action and configures
the
controller after an unchecked reset deassertion.
Stop probing when the reset controller rejects the transition, before the
hwmon device becomes visible.
Fixes: 18c514cc0e ("hwmon: (aspeed-pwm-tacho) Deassert reset in probe")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260830125044.97718-1-pengpeng@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
set_fan_speed() writes the control GPIOs one bit at a time. Every
other caller locks around it; gpio_fan_shutdown() doesn't. If it races
a locked caller, the GPIO writes can interleave and leave the fan at a
speed neither caller asked for.
Fixes: b95579cd87 ("hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans")
Reported-by: Sashiko AI review <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260830152150.27F5F1F000E9@smtp.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Link: https://patch.msgid.link/20260901155404.1532092-1-congnt264@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260708031612.BD7E61F000E9@smtp.kernel.org/
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 5997eb60f8 ("hwmon: (corsair-cpro) Add firmware and bootloader information")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260831014509.3352442-1-lilinmao@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some hwmon alarms fall back to STATUS_WORD summary bits when no
individual limit alarm is available. On PMBus 1.2 and newer devices,
pmbus_get_boolean() acknowledges these alarms with the same byte-data
write used for detailed status registers. For example, PB_STATUS_INPUT
is 0x2000, so it is truncated to zero when passed to
_pmbus_write_byte_data(). The resulting write cannot acknowledge the
input alarm.
PMBus 1.3 Part II, sections 10.2.4 and 10.2.5, excludes ordinary
STATUS_BYTE and STATUS_WORD summary bits from individual clearing.
Their summary bits clear when the underlying status bits clear, so
changing this to a word-data write would not fix the generic input
alarm either.
Use the existing page CLEAR_FAULTS path for generic STATUS_WORD
alarms, including devices whose status accessor uses STATUS_BYTE.
Keep individual byte writes for detailed status registers on PMBus
1.2 and newer devices. As with the existing older-device fallback,
CLEAR_FAULTS can clear other latched status; an active condition can
reassert its status.
Fixes: 35f165f089 ("hwmon: (pmbus) Clear pmbus fault/warning bits after read")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Vishnu Razdan <vrazdan@openai.com>
Link: https://patch.msgid.link/20260824-vrazdan-pmbus-status-word-b4-v1-1-2606ecd0c029@openai.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon_notify_event() expects the channel number as its last argument,
taken into account with the type parameter that it is a humidity sensor
type. Given that this device only provides one humidity channel, 0 must
be passed. The custom construct to enumerate the channels makes wrong
assumptions by listing all types together (temperature and humidity).
Remove the custom channel enumeration and pass the right channel to
hwmon_notify_event() for hwmon_humidity_min_alarm and
hwmon_humidity_max_alarm.
Fixes: 3af350929e ("hwmon: Add support for Amphenol ChipCap 2")
Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20260823-chipcap2_locks-v2-1-6a26c8e9e2fc@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When parsing a share-root relative native symlink, memcpy copies
smb_target+1 (skipping the leading separator) but uses
strlen(smb_target)+1 as the length, reading one byte past the
allocated buffer.
This fixes the following KASAN splat when accessing an SMB symlink
with a target of '\a\b':
BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0
Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1
CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N
7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix,
1996)
Call Trace:
<TASK>
dump_stack_lvl+0x7b/0xa0
print_report+0xd0/0x630
kasan_report+0xe5/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
smb2_parse_native_symlink+0x4f5/0xca0
parse_reparse_point+0x68a/0x1530
reparse_info_to_fattr+0x752/0xa20
cifs_get_fattr+0x873/0x15b0
cifs_get_inode_info+0xc0/0x310
cifs_lookup+0x308/0xa70
__lookup_slow+0x122/0x2b0
lookup_slow+0x50/0x70
path_lookupat+0x525/0xaf0
filename_lookup+0x1f2/0x550
vfs_statx+0xd1/0x1a0
vfs_fstatat+0x65/0xc0
__do_sys_newfstatat+0x9a/0x120
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: Yuanfu Xie <yuanfuxie@stu.pku.edu.cn>
Fixes: 723f4ef904 ("cifs: Fix parsing native symlinks relative to the export")
Suggested-by: Pali Rohar <pali@kernel.org>
Reviewed-by: Pali Rohar <pali@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
KSZ8851 errata sheet DS80000716D-page 4 Module 3 [1] states that,
when issuing a software power-down (PMECR[1:0] = 10) followed by a
power-on (PMECR[1:0] = 00), the receiver circuit can fail to start
properly preventing communication. The Transmitter will still send
data, but no data will be received.
The errata sheet also includes a workaround, which states that,
it is recommended that the software power-down feature not be used.
Implement that workaround and drop the entry into software power-down
mode. The ks8851_write_mac_addr() calls entry into normal power-on
mode at the very beginning of the function, therefore dropping the
second call to enter software power-down mode is sufficient here.
The ks8851_net_stop() can only be called after ks8851_net_start()
was already called, and ks8851_net_start() also makes the MAC enter
normal power-on mode, therefore it is also fine to drop the call to
enter software power-down mode from ks8851_net_stop().
This will lead to a slight increase in power consumption, but it also
fixes a sporadic reliability problem on at least KSZ8851-16MLL, which
is where the problem was reported and this fix was tested.
[1] https://ww1.microchip.com/downloads/en/DeviceDoc/80000716D.pdf
Fixes: 3ba81f3ece ("net: Micrel KS8851 SPI network driver")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260905130327.203851-1-marex@nabladev.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per the GSW145 data sheet, the FCONTX (bits 8:7) and FCONRX (bits 6:5)
flow-control fields of the PHY_ADDR_n register both encode 00 = AUTO,
01 = EN, 10 = reserved, 11 = DIS. GSWIP_MDIO_PHY_FCONTX_EN was 0x0100,
i.e. field value 10 (the reserved encoding), instead of 0x0080 (01 = EN);
FCONRX_EN is already 0x0020 (01). Enabling tx flow control therefore wrote
the reserved value.
Set FCONTX_EN to 0x0080. The register is shared by all supported parts.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Jan Havran (Advantech Czech) <havran.jan@email.cz>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260907134818.16670-4-havran.jan@email.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fqdir_pre_exit() flushes the skbs from incomplete queues without
changing their completion state. A fragment which found a queue before
high_thresh was cleared can then acquire the queue lock and reuse stale
reassembly metadata. A queue concurrently killed after fqdir->dead is
set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while
still holding its old skbs; skipping it because it is complete leaves
those references behind until asynchronous fqdir teardown.
For IPv6, stale metadata can make ip6_frag_reasm() use the old
nhoffset with a new skb and access memory out of bounds. The resulting
heap corruption can be leveraged for local privilege escalation when
unprivileged network namespaces are available. Unflushed fragments can
also keep conntrack references alive after the conntrack per-net
cleanup point.
Kill each incomplete queue, then flush every queue still owned by the
dying rhashtable. HASH_DEAD identifies that ownership, while complete
queues without it are already owned by another destroy path and must be
left alone. Releasing a timer reference removed by inet_frag_kill() is
deferred to inet_frag_putn(), after the queue lock is dropped.
KASAN report:
BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
Write of size 1 at addr ff110001039c6e00 by task poc/771
Call Trace:
? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
Read of size 1 at addr ff110001039c6e08 by task poc/771
Call Trace:
? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 8 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
Fixes: 006a5035b4 ("inet: frags: flush pending skbs in fqdir_pre_exit()")
Cc: stable@vger.kernel.org
Reported-by: Kimi Security Team <bug-report@moonshot.ai>
Tested-by: Weiming Shi <shiweiming@moonshot.ai>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yilin Zhang <yilinzhang@moonshot.ai>
Link: https://patch.msgid.link/20260904162800.1095662-1-yilinzhang@moonshot.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If WDT was running at boot, the hardware timeout might be set to values
other than the final software timeout.
To be consistent, set the hardware timeout to match the final software
timeout (i.e., after watchdog_init_timeout()) if WDT was running.
Fixes: ffd264bd15 ("watchdog: msc313e: Check if the WDT was running at boot")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-8-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
readw() returns a u16. Left shifting a u16 by 16 bits yields undefined
behavior.
Cast to u32 explicitly before the shift.
Fixes: ffd264bd15 ("watchdog: msc313e: Check if the WDT was running at boot")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-7-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If the hardware watchdog was started by the bootloader and the device is
suspended before userspace opens it, the ping worker (from watchdog
core) is frozen and the active hardware timer continues running. This
leads to a spurious system reset.
Check both watchdog_active() and watchdog_hw_running() when deciding
whether to start or stop the watchdog during suspend and resume.
Additionally, call watchdog_stop_ping_on_suspend() to ensure the ping
worker be correctly paused and restarted during suspend and resume.
Fixes: ffd264bd15 ("watchdog: msc313e: Check if the WDT was running at boot")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-6-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
msc313e_wdt_probe() reads from hardware registers without ensuring the
required clock is enabled. Furthermore, if the bootloader leaves the
watchdog running, msc313e_wdt_probe() sets WDOG_HW_RUNNING without
increasing the clock's reference count.
While the clock is currently supplied as a fixed clock by the device
tree (`xtal_div2` in arch/arm/boot/dts/sigmastar/mstar-v7.dtsi) which
masks the physical issue, this still violates the API usage.
Call clk_prepare_enable() before reading WDT registers. If the WDT is
running, leave the clock enabled so the CCF reference counter is
balanced.
Fixes: ffd264bd15 ("watchdog: msc313e: Check if the WDT was running at boot")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-5-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`.
Fixes: e9800b7994 ("watchdog: Add Mstar MSC313e WDT driver")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-4-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Per the watchdog API, a pretimeout value of 0 disables the feature.
However, watchdog_hrtimer_pretimeout_start() fails to verify if the
pretimeout is non-zero before arming the timer.
This omission inadvertently starts the software pretimeout timer,
which could result in the pretimeout handler executing incorrectly
when the watchdog timeout is reached.
Fix this by adding a check for wdd->pretimeout before calling
hrtimer_start(), ensuring the disabled state is respected.
Fixes: 7b7d2fdc8c ("watchdog: Add hrtimer-based pretimeout feature")
Signed-off-by: David Arcari <darcari@redhat.com>
Link: https://patch.msgid.link/20260903182029.936030-1-darcari@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.3-rc1
Here are various unrelated fixes:
- Patch 1: Do not reschedule the RTX timer for sockets that fell back to
TCP. A fix for v5.7.
- Patch 2: Avoid copying thmac which will not be used and could be
uninitialised. A fix for v5.7.
- Patch 3: Re-set the request backup flag when SYN cookies are used. A
fix for v5.9.
- Patch 4: Drop pending ADD_ADDR when removing ID0, and avoid a WARN. A
fix for v5.13.
- Patch 5: Handle invalid suboptions where the checksum is requested in
the MP_CAPABLE 4th ACK with data, but not added in the option. A fix
for v5.14.
- Patch 6: Prevent a race between mptcp_disconnect() and the retransmit
timer. A fix for v5.17.
- Patch 7: Fix a use-after-free in the selftests that could lead to
false positive. A fix for v5.17.
- Patch 8: Limit new addresses with the userspace PM to avoid an address
ID overflow. A fix for v5.19.
- Patch 9: Reset the ADD_ADDR retransmission counter when the timer is
reused. A fix for v5.19.
- Patch 10: Remove unneeded and confusing READ_ONCE() annotations. A fix
for v6.13.
- Patches 11-12: Get nstat counters for the current test, not since the
creation of the netns. A fix for v6.19.
- Patch 13: Fix an uninit-value in mptcp_write_data_fin for a corner
case now that only a part of the tcp_out_options struct is reset. A
fix for v7.1.
- Patches 14-15: Two follow-up patches addressing minor comments
discovered after the human review. A fix for v7.3-rc1.
====================
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-0-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pruning is expansive and destructive, do it only when we expect
to accept the skb triggering the cleanup.
Fixes: e468d37118 ("mptcp: implemented OoO queue pruning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-15-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current compiler hint annotation is wrong, due to inverted
logic in the previous revision of the relevant code.
Fixes: e468d37118 ("mptcp: implemented OoO queue pruning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-14-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending a DATA_FIN without data, and because the DATA_FIN occupies
1 octet of the connection-level sequence space [1], it is then required
to add a DSS mapping with specific values.
If the checksum has been negotiated, it also needs to be computed, and
included in the outgoing packet, and thus the initial csum data needs to
be reset to 0 as well. This is no longer the case since commit
cfcceb7a39 ("tcp: shrink per-packet memset in __tcp_transmit_skb()"),
because the whole ext_copy structure is no longer zeroed by default.
This seems to be the only case where use_map is changed and set
afterwards, so initialising the csum field only in this case, along with
other fields for this specific case.
Fixes: cfcceb7a39 ("tcp: shrink per-packet memset in __tcp_transmit_skb()")
Cc: stable@vger.kernel.org
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.3.3 [1]
Link: https://sashiko.dev/#/patchset/20260812-net-next-mptcp-misc-feat-7-3-v1-0-1905a818f6cb%40kernel.org?part=2
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-13-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the value for a MIB counter is required, mptcp_lib_get_counter is
called. It tries to use the cache, if available. If not it falls back to
calling 'nstat' directly by looking at the absolute counters.
That's an issue for tests that don't recreate the netns for each
subtest. In this case, 'nstat -a' will look at the counters for the
netns.
Instead, it should look at the increment for the current test, by using
the history recorded in /tmp/<ns>.nstat, if available, and not using
'-a' which was dumping the absolute values.
While at it, rename the previous 'hist' variable to 'cache' as it was
used to look at the cache, not the nstat history.
Fixes: 71388a9f33 ("selftests: mptcp: lib: get counters from nstat history")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-12-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors, mptcp_lib_pr_nstat is called to dump the nstat
counters, but for some tests, it was dumping the counters for all
subtests, not just the current one.
That's an issue for tests that don't recreate the netns for each
subtest, e.g. mptcp_connect.sh. In this case, 'nstat -a' will look at
the absolute counters since the creation of the netns, making
debugging harder.
Instead, it should dump the counters for the current test, by using the
history recorded in /tmp/<ns>.nstat if available, and not using '-a'
which was dumping the absolute values instead of calculating increments.
While at it, rename the previous 'hist' variable to 'cache' as it was
used to look at the cache, not the nstat history.
Fixes: 658e531417 ("selftests: mptcp: join: dump stats from history")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-11-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The subflow->fully_established flag is always written under the subflow
socket lock. Reading such value under the same lock does not require any
ONCE annotation.
Fixes: 581c8cbfa9 ("mptcp: annotate data-races around subflow->fully_established")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-10-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When all MPTCP address IDs (1-255) are exhausted in the userspace PM,
find_next_zero_bit() returns MPTCP_PM_MAX_ADDR_ID + 1 (256). This value
overflows when stored in the u8 field e->addr.id, resulting in ID 0
being stored and the entry being incorrectly added to the list.
ID 0 is reserved for the initial connection in MPTCP, so this overflow
can cause address conflicts.
Note: the in-kernel PM already has an 'endpoints == MPTCP_PM_MAX_ADDR_ID'
check in mptcp_pm_nl_append_new_local_addr() that returns -ERANGE before
reaching find_next_zero_bit(), preventing this overflow. So this fix only
addresses the userspace PM path.
Check the find_next_zero_bit() result against MPTCP_PM_MAX_ADDR_ID and
return -ENOSPC if all IDs are truly exhausted. Move the ID allocation
check before the memory allocation so that the error path does not need
to free the allocated entry.
Fixes: 4638de5aef ("mptcp: handle local addrs announced by userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-8-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the end of 'sock_connect_mptcp()', it calls 'freeaddrinfo(addr)',
the 'peer' pointer (which points into 'addr') remains. Later, the main
loop uses this peer pointer for reconnection attempts. If the memory has
been freed and reused, the address data could be overwritten, resulting
in an invalid remote address.
This patch keeps the addrinfo list allocated for the whole process
lifetime so "peer" remains valid across reconnects; the memory will be
released at exit() time.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-7-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation.
Cc: stable@vger.kernel.org
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-6-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this modification, a remote peer could send an MP_CAPABLE with
data, with the checksum flag set, but without adding the actual 2 bytes
of checksum. As a result, uninitialised bytes could be used for the
'csum' field.
That was not a critical issue, because this 'csum' field is only used to
compare with the expected one, if previously negotiated in the 3WHS.
Worst case, the checksum is likely wrong, a fallback is done without a
reject if the negotiation was done earlier. That's OK.
Yet, better to take the expected path with this case: only look at the
checksum flag for MP_CAPABLEs not carrying a data-len.
Such packet can be seen as a 3rd or 4th ACK. The RFC8684 mentions [1]
that the 3rd packet should have the checksum flag set. When an MPC + ACK
contains data, the checksum flag is redundant with the checksum field.
It is not clear what should be done for the 4th ACK, nor if the flag has
to be set if the checksum field is set.
Therefore, it seems fine to only look at the presence of the checksum
field, not to break the interaction with stacks that were not setting
both.
Note that linked to this checksum flag on the 3rd ACK, with the current
implementation, we can have a situation where the SYN packets have no
checksum flag, but the 3rd ACK has one, and this is the one that will be
taken into account. First, that's clearly not directly linked to this
patch, but Clashiko forced us to look at that. At the end, that seems
fine to act like that: yes that's not how the negotiation should work,
but being flexible without introducing side effects is also fine: fixing
this would mean increasing the complexity, and that's not worth it.
Fixes: 208e8f6692 ("mptcp: receive checksum for MP_CAPABLE with data")
Cc: stable@vger.kernel.org
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-23 [1]
Closes: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-0-b8f496d71664%40kernel.org?part=1
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-5-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup.
Fixes: 740d798e87 ("mptcp: remove id 0 address")
Cc: stable@vger.kernel.org
Reported-by: syzbot+55c2a5c871441261ed14@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/620
Suggested-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Kalpan Jani <kalpan.jani@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-4-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using an uninitialised bit when copying the info in
subflow_ulp_clone().
To fix this, no need to extend the join_entry structure: backup is
coming from struct mptcp_subflow_request_sock, only one bit. Do the same
here by using one bit for both.
Fixes: efd340bf3d ("mptcp: distinguish rcv vs sent backup flag in requests")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-3-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'thmac' is not used after that point.
Indeed, subflow_ulp_clone() is called when the request on the passive
side is over, so when the truncated HMAC is no longer needed.
Note that in case of SYN cookies, thmac will not be initialised. So
better to remove it to avoid a warning from debug tools like KMSAN for
reading uninitialised data.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-2-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On fallback socket the retrans timer is a quite convoluted no-op, but
currently nothing prevents the MPTCP core to keep rescheduling it.
Additionally gate RTX timer reset to the msk not being fallen back to
TCP yet. To avoid adding multiple tests in fast-path, use a new flags
bit for such condition.
The RTX enable bit is clear at close time and set before the msk could
start retransmitting, with a couple of caveats:
- passive sockets inherit the bit from the listener msk; set the bit on
such socket to avoid flipping it in the fast-path, even if the
listener will obviously never retransmit.
- while fastopening (MPTFO), mptcp_sendmsg_fastopen still ends-up
calling mptcp_connect via tcp_sendmsg_fastopen ->
__inet_stream_connect(ssk->sk_socket), and the first subflow's
sk_socket points to the msk one.
Fixes: b51f9b80c0 ("mptcp: introduce MPTCP retransmission timer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260908-net-mptcp-misc-fixes-7-3-rc1-v2-1-df1de70348b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0)
Fixes: ef07df397a ("net: dsa: tag_brcm: add support for legacy FCS tags")
Cc: stable@vger.kernel.org
Reported-by: co+28eef7d8af9428e6@bugs.sh
Closes: https://lore.kernel.org/all/jH6u350kaBRuqklDjd3k3BW4nWzp0tYRjq3p%40bugs.sh/
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260908165047.2786340-1-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaqF0GxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSs+YBALj3Ttl+T8cnEmxExfOYnPt6eL+oIsZFo6HU
zSXUqyiNAQDxtpucp/JgwBNbuk0XA+BfLSVWuw94jdqbPpCrjUW0BA==
=egGv
-----END PGP SIGNATURE-----
Merge tag 'landlock-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock fixes from Mickaël Salaün:
"This fixes a use-after-free and a lockdep assert NULL dereferencing,
and properly truncates too-long strings printed by a Landlock
tracepoint. Most of the changes are brought by new tests"
* tag 'landlock-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Test trace path output boundaries
landlock: Bound escaped trace path output
landlock: Clean up ruleset validation checks
selftests/landlock: Test abstract socket trace name limits
landlock: Fix use-after-free of the source's parent directory
Commit 493f349e38 ("memblock: Add flags and nid info in memblock
debugfs") made memblock_debug_show() stop after finding the first set
flag. A memblock region can carry multiple flags, so the remaining flags
are hidden from debugfs.
Walk all bits in the region flags and print every set flag separated by
"|". Keep walking beyond flagname[] so that a set flag without a known
name is reported as UNKNOWN rather than silently ignored.
Fixes: 493f349e38 ("memblock: Add flags and nid info in memblock debugfs")
Signed-off-by: Meijing Zhao <zhaomeijing@lixiang.com>
Link: https://patch.msgid.link/20260902075944.3742866-1-zhaomeijing100@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
- Fix potential multiplication overflow when calculating freq in OPP
core (Colin Ian King).
- Fix use after free in _update_opp_table_clk() (Peter Griffin).
- Use %pe to print symbolic error name (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmqg6SAACgkQ0rkcPK6B
EhxfIhAAiZ1MRiCnpxWJXo3dt37MGjzB6UrZ/S+PR51i4EyV1aLkU9gfgQA3T+Tz
pnPTGzvTRUYNf0ASNXR0faDUYffbfgW9k4RhZB5WKa/gmYOlgvkDRkNIH5WhSBr7
wmoSKjL93FrEiwdDHbOqacQUqdAyZS0t4HsDSmDGaHvAzuR9jyHyvEg448nZ3leA
+saVPt/PMyhid9v/DqEOfz4WLCfMAhrEvbbIl0qn0ySut8PLP95u+sXVpbUi3x1d
cKeNfwXjjEyFhqLptByr8dr6G9GUu2GY8jvwPRLKN9gLglq+lKo8ZMm1vWOSQ+Qt
D+vbXShKz33ijNhRy/acAsYGuz6aWqLQirlqq1l3+XQLdAOaHN5s/8cnXfUcieBJ
e3oXDJA6bwFMMi0LA15TMgfUn5S9Fx3Cr4PVctdhjgbFfyATDDSgXSGEP0GJr3xI
ChoYTSXDn7vnBb1jo+HWBfw4nqrMScBTksU70e6dKlvk1SyHWI2MM2k3qoSCgh4j
/s3FtLj31nstDuyDOvxGkhBW5qpnX+iiLwq6TzKLL6Sr/9AqoV8TcrOpTLizqzXW
0hkb/fUJEgtwN1gTm3Un7jStpjE5Gki6HWeCRPV+ybo+TbxfFBwemDE1TqCZ8GHY
7jhaa/ioxR6qPEH8LdQ9lTCrxma9eXzP814M3xXaqgAD/mjr6S8=
=78fU
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-7.3.rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP updates for 7.3-rc3 from Viresh Kumar:
"- Fix potential multiplication overflow when calculating freq in OPP
core (Colin Ian King).
- Fix use after free in _update_opp_table_clk() (Peter Griffin).
- Use %pe to print symbolic error name (Sumeet Pawnikar)."
* tag 'opp-updates-7.3.rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: fix use after free in _update_opp_table_clk()
opp: Use %pe to print symbolic error name
OPP: of: Fix potential multiplication overflow when calculating freq
Please consider pulling these changes from the signed vfs-7.3-rc3.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaqFWOQAKCRCRxhvAZXjc
otLlAP9X02ybdUt9NndBK8LjslDWwB9hOXzPgYsOKYODEqODjQD/aLpbXVEsA1yy
SLdSDtbtpf+01z4KHorvAakBzk/jrw4=
=OzBX
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- netfs:
- Fix an uninitialized return value in netfs_unbuffered_write()
when preparing the first subrequest fails
- For partial unbuffered/DIO writes return the amount transferred
rather than an error
- Update i_size with the amount actually written when a partial
transfer ends in an error
- Fix a subrequest reference leak when the io_iter ends up empty
- Handle netfs_alloc_subrequest() failure during unbuffered writes
- Load all readahead folios into the rolling buffer upfront and
drop the readahead references once the first subrequest is
dispatched
- Mark folios for copy-to-cache while issuing subrequests
- Fix read progress reporting
- afs:
- Add the missing kunmap in the error path of afs_dir_search_bucket()
- Fix a double kunmap in afs_edit_dir_remove()
- Don't free an existing server's endpoint state when cleaning up a
candidate server in afs_lookup_server()
- Unbind peers removed from a server's address list
- ufs:
- Load the cylinder group metadata before creating the root dentry
- Validate the cylinder group index and rotor positions before
caching them
- Treat an unreadable directory block as not empty
- exec:
- Close the close-on-exec files before taking exec_update_lock
Closing a file can block on the filesystem, so a hung filesystem
blocked everything that takes exec_update_lock and a FUSE server
inspecting the calling process could deadlock
- Drop the bprm loader before closing bprm->file in free_bprm()
- exit: Hold a reference to thread_pid across proc_flush_pid()
- reboot: Fix a use-after-free on cad_pid
- nsfs: Keep the namespace tree fields out of the rcu_head used by
kfree_rcu()
- nstree: Check listing permission before taking a namespace
reference in listns()
- super: Return 0 when a nested thaw drops its hold while other
freezers remain
- ext4: Don't set I_METADATA_WRITEBACK during fastcommit replay
- adfs: Free s_fs_info in ->kill_sb()
- autofs: Free the inode info allocated in autofs_fill_super() when
the root inode allocation fails
- ovl: Return EINVAL instead of EIO on a user namespace mismatch now
that it's a plain refusal and not an internal error
- cachefiles: Don't cast the variable-length coherency data to a
__be64 in the coherency tracepoint
* tag 'vfs-7.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
nstree: check listing permission before taking a namespace reference
exec: do_close_on_exec() before taking exec_update_lock
exit: hold a reference to thread_pid across proc_flush_pid
fs: autofs: fix memory leak in autofs_fill_super()
exec: Drop bprm loader before closing bprm->file
afs: Clear stale peer app data after address list changes
afs: Fix incorrect free in candidate cleanup in afs_lookup_server()
afs: Fix double-unmap of directory block
afs: Fix missing kunmap in afs_dir_search_bucket()
ovl: return EINVAL instead of EIO in case of mismatched user_ns
reboot: fix cad_pid use-after-free race
cachefiles: Fix potential UAF/KASAN warning
netfs: Fix read progress reporting
netfs: Mark folios with COPY_TO_CACHE whilst issuing subreqs
netfs: Fix readahead synchronisation issues by loading all folios upfront
netfs: break unbuffered write when netfs_alloc_subrequest() fails
netfs: Fix subreq ref leak
netfs: Fix i_size update for partial transfer
netfs: Fix error vs transferred passed to ->ki_complete()
netfs: Fix unbuffered/DIO write partial transfer error return
...
io_do_iopoll() assigns the result of io_put_kbuf() to the request's CQE
flags upon completion. This overwrites any CQE flags that may have been
set by the opcode-specific layer. (For example, if __io_uring_cmd_done()
had set IORING_CQE_F_32, it would be cleared.) Switch the = to an |= so
the kbuf flags are added to the existing CQE flags rather than replacing
them. io_req_rw_complete() does the same with the io_put_kbuf() result.
Fixes: e26dca67fd ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Reported-by: sashiko-bot@kernel.org
Link: https://sashiko.dev/#/message/20260827191705.D53C91F000E9%40smtp.kernel.org
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260902210200.2336720-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a recv/recvmsg is issued with MSG_TRUNC and the incoming packet is
larger than the provided buffer, the net layer returns the full length
of the packet rather than the number of bytes actually copied into the
buffer. As a result, io_uring advances more of the provided buffer ring
than was actually filled. Use the actual filled region size to consume
the buffer, but still return the full size to preserve MSG_TRUNC
semantics.
Take care with multishot, because that seems to already truncate the
consumption based on the available payload size.
This was reported in https://github.com/axboe/liburing/issues/1619.
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260728191454.1850326-1-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260902230041.1320658-3-krisman@suse.de
[axboe: fold in size_t unsigned fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just a ton of small fixes all over the place.
Also includes virtio and virtio-rng MAINTAINERS updates.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmqhKYcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRppBUIAK/QswxhFU0fUQPFQ4YU5xB8/ANGBBpaE1D0
D6g7LYJsB9SguzdiSWOK8BV9/2h8A485yoU98kQBHLCM/Qraclr/t8sNel0Vq3V/
FZmCW21EQZnbcsEbct5WlBlU2veUP2mAhBlRruHEFdMil/W2k4ifF26jFnKAgS8y
ixirBte0LRCo/Ho42D2mZrY40Z1viRKL03Uhl4jiJz+16bx8uRWGd0UELjr7fMT0
095HUYvOdCFLLedhFe9LFN5VFb+gy/iQjv/wOBAcwjjwHNIIAF40gedu8bRh8ovu
ZA17syGe5DjLnp/C1nnEwZhGSDngVEC/aBogKXKJ1MHtVbVZn+A=
=3WXI
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Just a ton of small fixes all over the place.
Also includes virtio and virtio-rng MAINTAINERS updates"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (27 commits)
vduse: return compat ioctl results directly
virtio_input: stop callbacks before unregistering input device
virtio_input: reset device if input_register_device() fails
vhost: invalidate vring access on IOTLB transitions
vduse: validate virtqueue alignment
vduse: do not take dev->rwsem in the virtqueue kick path
vhost-scsi: clamp max_io_vqs module parameter
vhost-scsi: use kvzalloc for vq array allocation
virtio-pci: return IRQ_HANDLED after non-zero ISR
virtio: add Eugenio Pérez as Maintainer
vhost: limit outstanding IOTLB misses per virtqueue
MAINTAINERS: Add a section for virtio-rng
vdpa_sim_net: check TX pull result before RX copy
vdpa_sim_blk: reject out-of-range sector starts
virtio-vdpa: Use queue id when setting vq affinity
vdpa: octeon_ep: Check dev_set_name() in dev add
vdpa: ifcvf: Put device on unsupported feature error
vdpa: solidrun: Free IRQs after request failure
vdpa: alibaba: Keep DRIVER_OK clear if IRQ setup fails
vdpa/pds: check virtqueue notify mapping
...
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
Link: 7c2ff46a4f
Fixes: 9f8f93bee3 ("drm/xe: Emit a render cache flush after each rcs/ccs batch")
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/8909
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Assisted-by: GitHub_Copilot:claude-sonnet-5
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260903114552.48634-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 434514b6fe)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
