When a durable file handle survives session disconnect (TCP close without
SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the
handle for later reconnection. However, it did not clean up the byte-range
locks on fp->lock_list.
Later, when the durable scavenger thread times out and calls
__ksmbd_close_fd(NULL, fp), the lock cleanup loop did:
spin_lock(&fp->conn->llist_lock);
This caused a slab use-after-free because fp->conn was NULL and the
original connection object had already been freed by
ksmbd_tcp_disconnect().
The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were
left dangling on the freed conn->lock_list while fp->conn was nulled out.
To fix this issue properly, we need to handle the lifetime of
smb_lock->clist across three paths:
- Safely skip clist deletion when list is empty and fp->conn is NULL.
- Remove the lock from the old connection's lock_list in
session_fd_check()
- Re-add the lock to the new connection's lock_list in
ksmbd_reopen_durable_fd().
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Co-developed-by: munan Huang <munanevil@gmail.com>
Signed-off-by: munan Huang <munanevil@gmail.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The former is just a nice macro and the latter allows runtime analysis
of the allocation and its size.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The structure definition on the server side is specified in MS-CIFS
2.2.8.2.3, but we should instead refer to MS-FSCC 2.5.9, just as the
client side does.
Modify the following places:
- smb3_fs_vol_info -> filesystem_vol_info
- SerialNumber -> VolumeSerialNumber
- VolumeLabelSize -> VolumeLabelLength
Then move it into common header file.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This struct definition is specified in MS-FSCC, so move them into fscc.h.
Modify the following places:
- smb2_file_basic_info -> file_basic_info
- Pad1 -> Pad
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
These definitions are specified in MS-FSCC, so move them into fscc.h.
Only add some documentation references, no other changes.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Sun Jian says:
====================
bpf: fix short IPv4/IPv6 handling in test_run_skb
bpf_prog_test_run_skb() may access IPv4/IPv6 network headers based on
skb->protocol even when the provided test input only contains an
Ethernet header.
Fix it by rejecting such short IPv4/IPv6 inputs before accessing the
L3 headers, and add a selftest that exercises the reported
bpf_skb_adjust_room() path on ETH_HLEN-sized IPv4/IPv6 EtherType
inputs.
Changes in v4:
- Split the selftests into a separate patch.
- Rework the selftest to actually execute a BPF program calling
bpf_skb_adjust_room().
- Reuse a single struct ethhdr eth_hlen and initialize h_proto from
the test case table.
- Add the Fixes tag to the test_run.c patch.
Link: https://lore.kernel.org/bpf/CABFUUZF_CWQZrRk=L9cNxO=8Z4iSgGfXi3J=hpzeyTKDbfE2-w@mail.gmail.com/T/#mfabfe7e86bb30c0141fbc9f751b8b1cb07767f01
====================
Link: https://patch.msgid.link/20260408034623.180320-1-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest covering ETH_HLEN-sized IPv4/IPv6 EtherType inputs for
bpf_prog_test_run_skb().
Reuse a single zero-initialized struct ethhdr eth_hlen and set
eth_hlen.h_proto from the per-test h_proto field.
Also add a dedicated tc_adjust_room program and route the short
IPv4/IPv6 cases to it, so the selftest actually exercises the
bpf_skb_adjust_room() path from the report.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260408034623.180320-3-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers.
Fixes: fa5cb548ce ("bpf: Setup socket family and addresses in bpf_prog_test_run_skb")
Reported-by: syzbot+619b9ef527f510a57cfc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=619b9ef527f510a57cfc
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260408034623.180320-2-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Konstantin Khorenko says:
====================
net: fix skb_ext BUILD_BUG_ON failures with GCOV
This mini-series fixes build failures in net/core/skbuff.c when the
kernel is built with CONFIG_GCOV_PROFILE_ALL=y.
This is part of a larger effort to add -fprofile-update=atomic to
global CFLAGS_GCOV (posted earlier as a combined series):
https://lore.kernel.org/lkml/20260401142020.1434243-1-khorenko@virtuozzo.com/T/#t
That combined series was split per subsystem as requested by Jakub.
The companion patches are:
- iommu: use __always_inline for amdv1pt_install_leaf_entry()
(sent to iommu maintainers)
- gcov: add -fprofile-update=atomic globally (sent to gcov/kbuild
maintainers, depends on this series and the iommu patch)
Patch 1/2 fixes a pre-existing build failure with CONFIG_GCOV_PROFILE_ALL:
GCOV counters prevent GCC from constant-folding the skb_ext_total_length()
loop. It also removes the CONFIG_KCOV_INSTRUMENT_ALL preprocessor guard
from d6e5794b06: that guard was a precaution in case KCOV instrumentation
also prevented constant folding, but KCOV's -fsanitize-coverage=trace-pc
does not interfere with GCC's constant folding (verified experimentally
with GCC 14.2 and GCC 16.0.1), so the guard is unnecessary.
Patch 2/2 is an additional fix needed when -fprofile-update=atomic is
added to CFLAGS_GCOV: __no_profile on the __always_inline function alone
is insufficient because after inlining, the code resides in the caller's
profiled body. The caller (skb_extensions_init) needs __no_profile and
noinline to prevent re-exposure to GCOV instrumentation.
====================
Link: https://patch.msgid.link/20260410162150.3105738-1-khorenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With -fprofile-update=atomic in global CFLAGS_GCOV, GCC still cannot
constant-fold the skb_ext_total_length() loop when it is inlined into a
profiled caller. The existing __no_profile on skb_ext_total_length()
itself is insufficient because after __always_inline expansion the code
resides in the caller's body, which still carries GCOV instrumentation.
Mark skb_extensions_init() with __no_profile so the BUILD_BUG_ON checks
can be evaluated at compile time. Also mark it noinline to prevent the
compiler from inlining it into skb_init() (which lacks __no_profile),
which would re-expose the function body to GCOV instrumentation.
Add __init since skb_extensions_init() is only called from __init
skb_init(). Previously it was implicitly inlined into the .init.text
section; with noinline it would otherwise remain in permanent .text,
wasting memory after boot.
Build-tested with both CONFIG_GCOV_PROFILE_ALL=y and
CONFIG_KCOV_INSTRUMENT_ALL=y.
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Link: https://patch.msgid.link/20260410162150.3105738-3-khorenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_GCOV_PROFILE_ALL=y is enabled, the kernel fails to build:
In file included from <command-line>:
In function 'skb_extensions_init',
inlined from 'skb_init' at net/core/skbuff.c:5214:2:
././include/linux/compiler_types.h:706:45: error: call to
'__compiletime_assert_1490' declared with attribute error:
BUILD_BUG_ON failed: skb_ext_total_length() > 255
CONFIG_GCOV_PROFILE_ALL adds -fprofile-arcs -ftest-coverage
-fno-tree-loop-im to CFLAGS globally. GCC inserts branch profiling
counters into the skb_ext_total_length() loop and, combined with
-fno-tree-loop-im (which disables loop invariant motion), cannot
constant-fold the result.
BUILD_BUG_ON requires a compile-time constant and fails.
The issue manifests in kernels with 5+ SKB extension types enabled
(e.g., after addition of SKB_EXT_CAN, SKB_EXT_PSP). With 4 extensions
GCC can still unroll and fold the loop despite GCOV instrumentation;
with 5+ it gives up.
Mark skb_ext_total_length() with __no_profile to prevent GCOV from
inserting counters into this function. Without counters the loop is
"clean" and GCC can constant-fold it even with -fno-tree-loop-im active.
This allows BUILD_BUG_ON to work correctly while keeping GCOV profiling
for the rest of the kernel.
This also removes the CONFIG_KCOV_INSTRUMENT_ALL preprocessor guard
introduced by d6e5794b06. That guard was added as a precaution because
KCOV instrumentation was also suspected of inhibiting constant folding.
However, KCOV uses -fsanitize-coverage=trace-pc, which inserts
lightweight trace callbacks that do not interfere with GCC's constant
folding or loop optimization passes. Only GCOV's -fprofile-arcs combined
with -fno-tree-loop-im actually prevents the compiler from evaluating
the loop at compile time. The guard is therefore unnecessary and can be
safely removed.
Fixes: 96ea3a1e2d ("can: add CAN skb extension infrastructure")
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Reviewed-by: Thomas Weissschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260410162150.3105738-2-khorenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the configuration data required for IPA v5.2, which is used in
the Qualcomm Milos SoC.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260410-ipa-v5-2-v2-2-778422a05060@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the Milos SoC, which uses IPA v5.2.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260410-ipa-v5-2-v2-1-778422a05060@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PPE enforces output frame size limits via per-tag-layer VLAN_MTU
registers that the driver never initializes. The hardware defaults do
not account for PPPoE overhead, causing the PPE to punt encapsulated
frames back to the CPU instead of forwarding them.
Initialize the registers at PPE start and on MTU changes using the
maximum GMAC MTU. This is a conservative approximation -- the actual
per-PPE requirement depends on egress path, but using the global
maximum ensures the limits are never too small.
Fixes: ba37b7caf1 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ec995ab8ce8be423267a1cc093147a74d2eb9d82.1775789829.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sk member can be directly accessed from struct pppox_sock without
relying on type casting. Remove the sk_pppox() helper and update all
call sites to use po->sk directly.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260410054954.114031-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 795cda8338 ("rtc: interface: Fix long-standing race when setting
alarm") exposed an issue where the rtc-abx80x driver does not clear the
alarm feature bit, but instead relies on the set_alarm operation to return
invalid.
For example, when a RTC_UIE_ON ioctl is handled, it should abort at the
feature validation. Instead, it proceeds to the rtc_timer_enqueue(),
which used to return an error from the set_alarm call. However,
following the race condition handling, which likely should not be
discarding predecing errors, a success condition is returned to the
ioctl() caller. This results in (for example):
hwclock: select() to /dev/rtc0 to wait for clock tick timed out
Notwithstanding the validity of the race condition handling, if an interrupt
wasn't specified, or could not be attached, the driver should clear the
alarm feature bit.
Fixes: 718a820a30 ("rtc: abx80x: add alarm support")
Signed-off-by: Anthony Pighin <anthony.pighin@nokia.com>
Link: https://patch.msgid.link/BN0PR08MB69510928028C933749F4139383D1A@BN0PR08MB6951.namprd08.prod.outlook.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace shm_open/shm_unlink with memfd_create in the shmem subtest.
shm_open requires /dev/shm to be mounted, which is not always available
in test environments, causing the test to fail with ENOENT.
memfd_create creates an anonymous shmem-backed fd without any filesystem
dependency while exercising the same shmem accounting path.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20260412210636.47516-1-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tariq Toukan says:
====================
mlx5 misc fixes 2026-04-09
This small patchset provides misc bug fixes from Gal to the mlx5 Eth
driver.
====================
Link: https://patch.msgid.link/20260409202852.158059-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The do-while poll loop uses jiffies for its timeout:
expires = jiffies + msecs_to_jiffies(10);
jiffies is sampled at an arbitrary point within the current tick, so the
first partial tick contributes anywhere from a full tick down to nearly
zero real time. For small msecs_to_jiffies() results this is
significant, the effective poll window can be much shorter than the
requested 10ms, and in the worst case the loop exits after a single
iteration (e.g., when HZ=100), well before the device has delivered the
CQE.
Replace the loop with read_poll_timeout_atomic(), which counts elapsed
time via udelay() accounting rather than jiffies, guaranteeing the full
poll window regardless of HZ.
Additionally, read_poll_timeout_atomic() executes the poll operation one
more time after the timeout has expired, giving the CQE a final chance
to be detected. The old do-while loop could exit without a final poll if
the timeout expired during the udelay() between iterations.
Fixes: 76e463f650 ("net/mlx5e: Overcome slow response for first IPsec ASO WQE")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260409202852.158059-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_fix_features() returns early when the netdevice is not present.
This is correct during profile transitions where priv is cleared, but it
also incorrectly blocks feature fixups during register_netdev(), when
the device is also not yet present.
It is not trivial to distinguish between both cases as we cannot use
priv to carry state, and in both cases reg_state == NETREG_REGISTERED.
Force a netdev features update after register_netdev() completes, where
the device is present and fix_features() can actually work.
This is not a pretty solution, as it results in an additional features
update call (register_netdevice() already calls
__netdev_update_features() internally), but it is the simplest,
cleanest, and most robust way I found to fix this issue after multiple
attempts.
This fixes an issue on systems where CQE compression is enabled by
default, RXHASH remains enabled after registration despite the two
features being mutually exclusive.
Fixes: ab4b01bfda ("net/mlx5e: Verify dev is present for fix features ndo")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260409202852.158059-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5-next updates 2026-04-09
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add icm_mng_function_id_mode cap bit
net/mlx5: Rename MLX5_PF page counter type to MLX5_SELF
net/mlx5: Add vhca_id_type bit to alias context
mlx5: Remove redundant iseg base
====================
Link: https://patch.msgid.link/20260409110431.154894-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vsock_update_buffer_size(), the buffer size was being clamped to the
maximum first, and then to the minimum. If a user sets a minimum buffer
size larger than the maximum, the minimum check overrides the maximum
check, inverting the constraint.
This breaks the intended socket memory boundaries by allowing the
vsk->buffer_size to grow beyond the configured vsk->buffer_max_size.
Fix this by checking the minimum first, and then the maximum. This
ensures the buffer size never exceeds the buffer_max_size.
Fixes: b9f2b0ffde ("vsock: handle buffer_size sockopts in the core")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/180118C5-8BCF-4A63-A305-4EE53A34AB9C@doyensec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap() will soon return the reason by value,
do the same for tcp_filter().
Note:
tcp_filter() is no longer inlined. Following patch will inline it again.
$ scripts/bloat-o-meter -t vmlinux.4 vmlinux.5
add/remove: 2/0 grow/shrink: 0/2 up/down: 186/-43 (143)
Function old new delta
tcp_filter - 154 +154
__pfx_tcp_filter - 32 +32
tcp_v4_rcv 3152 3143 -9
tcp_v6_rcv 3169 3135 -34
Total: Before=29722640, After=29722783, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap will soon return the reason by value,
do the same for sk_filter_reason().
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-21 (-21)
Function old new delta
sock_queue_rcv_skb_reason 128 126 -2
tun_net_xmit 1146 1127 -19
Total: Before=29722661, After=29722640, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap() will soon return the drop reason by value.
Make sure *reason is cleared when no error is returned,
to ease this conversion.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-7 (-7)
Function old new delta
sk_filter_trim_cap 889 882 -7
Total: Before=29722668, After=29722661, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Charles Perry says:
====================
Add support for PIC64-HPSC/HX MDIO controller
This series adds a driver for the two MDIO controllers of PIC64-HPSC/HX.
The hardware supports C22 and C45 but only C22 is implemented for now.
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely different
with pic64hpsc, hence the need for a separate driver.
The documentation recommends an input clock of 156.25MHz and a prescaler of
39, which yields an MDIO clock of 1.95MHz.
This was tested on Microchip HB1301 evalkit which has a VSC8574 and a
VSC8541. I've tested with bus frequencies of 0.6, 1.95 and 2.5 MHz.
This series also adds a PHY write barrier when disabling PHY interrupts as
discussed in: https://lore.kernel.org/acvUqDgepCIScs8M@shell.armlinux.org.uk
====================
Link: https://patch.msgid.link/20260408131821.1145334-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO bus controllers are not required to wait for write transactions to
complete before returning as synchronization is often achieved by polling
status bits.
This can cause issues when disabling interrupts since an interrupt could
fire before the interrupt handler is unregistered and there's no status
bit to poll.
Add a phy_write_barrier() function and use it in phy_disable_interrupts()
to fix this issue. The write barrier just reads an MII register and
discards the value, which is enough to guarantee that previous writes have
completed.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-4-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds an MDIO driver for PIC64-HPSC/HX. The hardware supports C22
and C45 but only C22 is implemented in this commit.
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely
different with pic64hpsc, hence the need for a separate driver.
The documentation recommends an input clock of 156.25MHz and a prescaler
of 39, which yields an MDIO clock of 1.95MHz.
The hardware supports an interrupt pin or a "TRIGGER" bit that can be
polled to signal transaction completion. This commit uses polling.
This was tested on Microchip HB1301 evalkit with a VSC8574 and a
VSC8541.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260408131821.1145334-3-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely different
with pic64hpsc, hence the need for separate documentation.
The hardware supports C22 and C45.
The documentation recommends an input clock of 156.25MHz and a prescaler
of 39, which yields an MDIO clock of 1.95MHz.
The hardware supports an interrupt pin to signal transaction completion
which is not strictly needed as the software can also poll a "TRIGGER"
bit for this.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-2-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of phy_c45_probe_present() is stored in "ret", not
"phy_reg", fix this. "phy_reg" always has a positive value if we reach
this return path (since it would have returned earlier otherwise), which
means that the original goal of the patch of not considering -ENODEV
fatal wasn't achieved.
Fixes: 17b4475394 ("net: phy: c45 scanning: Don't consider -ENODEV fatal")
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260409133654.3203336-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 435af89786 ("rtc: New driver for RTC in Netronix embedded controller")
Cc: stable@vger.kernel.org # 5.13
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407122717.2676774-1-johan@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This driver currently only supports builds against a PIC32 target. Now
that commit ed65ae9f6c ("rtc: pic32: update include to use pic32.h
from platform_data") is merged, it's possible to compile this driver on
other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20260222-rtc-pic32-v1-1-3f8eb654a34d@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Restore the RTC HW context which may be lost when system enters
certain low power mode (IO+DDR mode).
Check if the RTC registers are locked which would indicate loss of
context (reset) and restore the context as needed.
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://patch.msgid.link/20260313111740.1492519-1-a-kaur@ti.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Currently, the binding requires 'spi-cpha' for SJA1105 and 'spi-cpol'
for SJA1110.
However, the SJA1110 supports both SPI modes 0 and 2. Mode 2
(cpha=0, cpol=1) is used by the NXP LX2160 Bluebox 3.
On the SolidRun i.MX8DXL HummingBoard Telematics, mode 0 is stable,
while forcing mode 2 introduces CRC errors especially during bursts.
Drop the requirement on spi-cpol for SJA1110.
Fixes: af2eab1a82 ("dt-bindings: net: nxp,sja1105: document spi-cpol/cpha")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260409-imx8dxl-sr-som-v2-1-83ff20629ba0@solid-run.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/dev/ppp open is currently authorized against file->f_cred->user_ns,
while unattached administrative ioctls operate on current->nsproxy->net_ns.
As a result, a local unprivileged user can create a new user namespace
with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,
and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against
an inherited network namespace.
Require CAP_NET_ADMIN in the user namespace that owns the target network
namespace before handling unattached PPP administrative ioctls.
This preserves normal pppd operation in the network namespace it is
actually privileged in, while rejecting the userns-only inherited-netns
case.
Fixes: 273ec51dd7 ("net: ppp_generic - introduce net-namespace functionality v2")
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Link: https://patch.msgid.link/20260409071117.4354-1-hataegu0826@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xulang <xulang@uniontech.com> says:
====================
Fix OOB read when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE
map to another pcpu map with the same value_size that is not rounded
up to 8 bytes, and add a test case to reproduce the issue.
The root cause is that pcpu_init_value() uses copy_map_value_long() which
rounds up the copy size to 8 bytes, but CGROUP_STORAGE map values are not
8-byte aligned (e.g., 4-byte). This causes a 4-byte OOB read when
the copy is performed.
====================
Link: https://lore.kernel.org/r/7653EEEC2BAB17DF+20260402073948.2185396-1-xulang@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test case to reproduce the out-of-bounds read issue when copying
from a cgroup storage map to a pcpu map with a value_size not rounded
up to 8 bytes.
The test creates:
1. A CGROUP_STORAGE map with 4-byte value (not 8-byte aligned)
2. A LRU_PERCPU_HASH map with 4-byte value (same size)
When a socket is created in the cgroup, the BPF program triggers
bpf_map_update_elem() which calls copy_map_value_long(). This function
rounds up the copy size to 8 bytes, but the cgroup storage buffer is
only 4 bytes, causing an OOB read (before the fix).
Signed-off-by: Lang Xu <xulang@uniontech.com>
Link: https://lore.kernel.org/r/D63BF0DBFF1EA122+20260402074236.2187154-2-xulang@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8.
Fixes: d3bec0138b ("bpf: Zero-fill re-used per-cpu map element")
Reported-by: Kaiyan Mei <kaiyanm@hust.edu.cn>
Closes: https://lore.kernel.org/all/14e6c70c.6c121.19c0399d948.Coremail.kaiyanm@hust.edu.cn/
Link: https://lore.kernel.org/r/420FEEDDC768A4BE+20260402074236.2187154-1-xulang@uniontech.com
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allison Henderson says:
====================
net/rds: Fix use-after-free in RDS/IB for non-init namespaces
This series fixes syzbot bug da8e060735ae02c8f3d1
https://syzkaller.appspot.com/bug?extid=da8e060735ae02c8f3d1
The report finds a use-after-free bug where ib connections access an
invalid network namespace after it has been freed. The stack is:
rds_rdma_cm_event_handler_cmn
rds_conn_path_drop
rds_destroy_pending
check_net() <-- use-after-free
This is initially introduced in:
d5a8ac28a7 ("RDS-TCP: Make RDS-TCP work correctly when it is set up
in a netns other than init_net").
Here, we made RDS aware of the namespace by storing a net pointer in
each connection. But it is not explicitly restricted to init_net in
the case of ib. The RDS/TCP transport has its own pernet exit handler
(rds_tcp_exit_net) that destroys connections when a namespace is torn
down. But RDS/IB does not support more than the initial namespace and
has no such handler. The initial namespace is statically allocated,
and never torn down, so it always has at least one reference.
Allowing non init namespaces that do not have a persistent reference
means that when their refcounts drop to zero, they are released through
cleanup_net(). Which would call any registered pernet clean up handlers
if it had any, but since they don't in this case, the extra
rds_connections remain with stale c_net pointers. Which are then
accessed later causing the use-after-free bug.
So, the simple fix is to disallow more than the initial namespace
to be created in the case of ib connections.
Fixes are ported from UEK patches found here:
8ed9a82376
Patch 1 is a prerequisite optimization to rds_ib_laddr_check() that
avoids excessive rdma_bind_addr() calls during transport probing by
first checking rds_ib_get_device(). This is needed because patch 2
adds a namespace check at the top of the same function.
UEK: 8ed9a82376b7 ("rds: ib: Optimize rds_ib_laddr_check")
bd9489a080
Patch 2 restricts RDS/IB to the initial network namespace. It adds
checks in both rds_ib_laddr_check() and rds_set_transport() to reject
IB use from non-init namespaces with -EPROTOTYPE. This prevents the
use-after-free by ensuring IB connections cannot exist in namespaces
that may be torn down.
UEK: bd9489a08004 ("net/rds: Restrict use of RDS/IB to the initial
network namespace")
Questions, comments and feedback appreciated!
====================
Link: https://patch.msgid.link/20260408080420.540032-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
