This panel requires dual-channel mode. The device accepts video-mode data
on 8 lanes and will therefore need a dual-channel DSI controller. The two
interfaces that make up this device need to be instantiated in the
controllers that gang up to provide the dual-channel DSI host.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250919153839.236241-3-clamor95@gmail.com
Document Sharp LQ079L1SX01 panel found in Xiaomi Mi Pad.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250919153839.236241-2-clamor95@gmail.com
According to the eDP specification (VESA Embedded DisplayPort Standard
v1.4b, Section 3.3.10.2), if the value of DP_EDP_PWMGEN_BIT_COUNT is
less than DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, the sink is required to use
the MIN value as the effective PWM bit count.
This commit updates the logic to clamp the reported
DP_EDP_PWMGEN_BIT_COUNT to the range defined by _CAP_MIN and _CAP_MAX.
As part of this change, the behavior is modified such that reading both
_CAP_MIN and _CAP_MAX registers is now required to succeed, otherwise
bl->max value could end up being not set although
drm_edp_backlight_probe_max() returned success.
This ensures correct handling of eDP panels that report a zero PWM
bit count but still provide valid non-zero MIN and MAX capability
values. Without this clamping, brightness values may be interpreted
incorrectly, leading to a dim or non-functional backlight.
For example, the Samsung ATNA40YK20 OLED panel used in the Lenovo
ThinkPad T14s Gen6 (Snapdragon) reports a PWM bit count of 0, but
supports AUX backlight control and declares a valid 11-bit range.
Clamping ensures brightness scaling works as intended on such panels.
Co-developed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250814-topic-x1e80100-t14s-oled-dp-brightness-v7-1-b3d7b4dfe8c5@linaro.org
The ILI9881C is a DSI panel, which can be tied to a DSI controller
using OF graph port/endpoint. Allow the port subnode in the binding.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250904200130.168263-1-marek.vasut+renesas@mailbox.org
The shift6mq's variant supports controlling the backlight via DSI
commands. Use that if a max_brightness is set in the device specific
data.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-3-a7729911afb9@sigxcpu.org
Don't clear all mode flags. We only want to maek sure we use HS mode
during unprepare.
Fixes: c7f66d32dd ("drm/panel: add support for rm69299 visionox panel")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-2-a7729911afb9@sigxcpu.org
Make the clock frequency match what the sdm845 downstream kernel
uses. Otherwise the panel stays black.
Fixes: 783334f366 ("drm/panel: visionox-rm69299: support the variant found in the SHIFT6mq")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-1-a7729911afb9@sigxcpu.org
Add configuration for the 5" Raspberry Pi 720x1280 DSI panel
based on ili9881. This uses 10px longer horizontal sync pulse
and 10px shorter HBP to avoid very short hsync pulse.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250904205743.186177-2-marek.vasut+renesas@mailbox.org
Document the 5" Raspberry Pi 720x1280 DSI panel based on ili9881.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250904205743.186177-1-marek.vasut+renesas@mailbox.org
Make all ILI9881C_COMMAND_INSTR() parameters consistently lowercase.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250904205541.186001-1-marek.vasut+renesas@mailbox.org
JuTouch is a chinese touch screen supplier dedicated to manufacturing
high-end touch display products for the global industrial market.
(www.jutouch.com)
Add a vendor prefix for it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250821-v6-17-topic-imx8mp-skov-dts-jutouch-10inch-v1-1-b492ef807d12@pengutronix.de
HyperV's virtual hardware does not provide vblank interrupts. Use a
vblank timer to simulate the interrupt. Rate-limits the display's
update frequency to the display-mode settings. Avoids excessive CPU
overhead with compositors that do not rate-limit their output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250916083816.30275-5-tzimmermann@suse.de
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250916083816.30275-4-tzimmermann@suse.de
Implement atomic_flush, atomic_enable and atomic_disable of struct
drm_crtc_helper_funcs for vblank handling. Driver with no further
requirements can use these functions instead of adding their own.
Also simplifies the use of vblank timers.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b ("drm/vkms: Add vblank events simulated by
hrtimers").
v3:
- mention vkms (Javier)
v2:
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250916083816.30275-3-tzimmermann@suse.de
The vblank timer simulates a vblank interrupt for hardware without
support. Rate-limits the display update frequency.
DRM drivers for hardware without vblank support apply display updates
ASAP. A vblank event informs DRM clients of the completed update.
Userspace compositors immediately schedule the next update, which
creates significant load on virtualization outputs. Display updates
are usually fast on virtualization outputs, as their framebuffers are
in regular system memory and there's no hardware vblank interrupt to
throttle the update rate.
The vblank timer is a HR timer that signals the vblank in software.
It limits the update frequency of a DRM driver similar to a hardware
vblank interrupt. The timer is not synchronized to the actual vblank
interval of the display.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b ("drm/vkms: Add vblank events simulated by
hrtimers").
The new implementation is part of the existing vblank support,
which sets up the timer automatically. Drivers only have to start
and cancel the vblank timer as part of enabling and disabling the
CRTC. The new vblank helper library provides callbacks for struct
drm_crtc_funcs.
The standard way for handling vblank is to call drm_crtc_handle_vblank().
Drivers that require additional processing, such as vkms, can init
handle_vblank_timeout in struct drm_crtc_helper_funcs to refer to
their timeout handler.
There's a possible deadlock between drm_crtc_handle_vblank() and
hrtimer_cancel(). [1] The implementation avoids to call hrtimer_cancel()
directly and instead signals to the timer function to not restart
itself.
v4:
- fix possible race condition between timeout and atomic commit (Michael)
v3:
- avoid deadlock when cancelling timer (Ville, Lyude)
v2:
- implement vblank timer entirely in vblank helpers
- downgrade overrun warning to debug
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/all/20250510094757.4174662-1-zengheng4@huawei.com/ # [1]
Link: https://lore.kernel.org/r/20250916083816.30275-2-tzimmermann@suse.de
Fix compiler error caused by the round_rate() to determine_rate()
migration.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280327.jsapR0Ww-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: e9f039c08c ("clk: microchip: core: convert from round_rate() to determine_rate()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Increases the number of bits for the hash table from 3 to 12.
The thousands of sessions and shares can be connected.
So the current 3-bit size can lead to frequent hash collisions.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace connection list with hash table to improve lookup performance.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This change introduces an error print using pr_info_ratelimited()
to prevent excessive logging. This message will inform the user that
the limit for maximum IP connections has been hit and what that
current count is, which can be useful for debugging and monitoring
connection limits.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This parameter set the maximum number of connections per ip address.
The default is 8.
Cc: stable@vger.kernel.org
Fixes: c0d41112f1 ("ksmbd: extend the connection limiting mechanism to support IPv6")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.
Return error immediately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs.ko request to copy overlapped range within the same file.
ksmbd is using vfs_copy_file_range for this, vfs_copy_file_range() does not
allow overlapped copying within the same file.
This patch use do_splice_direct() if offset and length are overlapped.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch makes ksmbd thread names distinct by client IP address.
100943 ? S 0:00 [ksmbd:::ffff:10.177.110.57]
or
101752 ? S 0:00 [ksmbd:10.177.110.57]
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd
session. Access to this list is intended to be protected by
'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was
flawed, leading to potential race conditions.
In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock
before calling xa_store() and xa_erase(). Since these operations modify
the XArray structure, a write lock is required to ensure exclusive access
and prevent data corruption from concurrent modifications.
Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load()
without holding any lock at all. This could lead to reading inconsistent
data or a potential use-after-free if an entry is concurrently removed and
the pointer is dereferenced.
Fix these issues by:
1. Using down_write() and up_write() in ksmbd_session_rpc_open()
to ensure exclusive access during XArray modification, and ensuring
the lock is correctly released on error paths.
2. Adding down_read() and up_read() in ksmbd_session_rpc_method()
to safely protect the lookup.
Fixes: a1f46c99d9 ("ksmbd: fix use-after-free in ksmbd_session_rpc_open")
Fixes: b685757c7b ("ksmbd: Implements sess->rpc_handle_list as xarray")
Cc: stable@vger.kernel.org
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Only contains small bugfixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaNmibgAKCRDB+h1jyw5b
OP8VAQDzrMGp77iFvfAFRsFuGYXLpWgNd8aWzFVMmPz/Kts3yAD/X1RnJsak5l5g
iiuZTPijrZeyQaO0uX4UV/XVHzxU2Ac=
=IenX
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
"Only small bugfixes and cleanups"
* tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add stdbool.h to nolibc includes
tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers
selftests/nolibc: remove outdated comment about construct order
selftests/nolibc: fix EXPECT_NZ macro
tools/nolibc: drop wait4() support
kselftest/arm64: tpidr2: Switch to waitpid() over wait4()
tools/nolibc: fold llseek fallback into lseek()
tools/nolibc: remove __nolibc_enosys() fallback from fork functions
tools/nolibc: remove __nolibc_enosys() fallback from dup2()
tools/nolibc: remove __nolibc_enosys() fallback from *at() functions
tools/nolibc: remove __nolibc_enosys() fallback from time64-related functions
tools/nolibc: use tabs instead of spaces for indentation
tools/nolibc: avoid error in dup2() if old fd equals new fd
selftests/nolibc: always compile the kernel with GCC
selftests/nolibc: don't pass CC to toplevel Makefile
selftests/nolibc: deduplicate invocations of toplevel Makefile
selftests/nolibc: be more specific about variables affecting nolibc-test
tools/nolibc: fix error return value of clock_nanosleep()
Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more to
come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/' links
and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s, simplifying
the 'rusttest' target. Tests should generally run within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a power
of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=+VG2
-----END PGP SIGNATURE-----
Merge tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
-----BEGIN PGP SIGNATURE-----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=LeQi
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Bo Sun says:
====================
octeontx2: fix bitmap leaks in PF and VF
Two small patches that free the AF_XDP bitmap in the PF and VF
remove paths. Both carry the same Fixes tag and should go to
stable.
====================
Link: https://patch.msgid.link/20250930061236.31359-1-bo@mboxify.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bitmap allocated with bitmap_zalloc() in otx2_probe() was not
released in otx2_remove(). Unbinding and rebinding the driver therefore
triggers a kmemleak warning:
unreferenced object (size 8):
backtrace:
bitmap_zalloc
otx2_probe
Call bitmap_free() in the remove path to fix the leak.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Bo Sun <bo@mboxify.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bitmap allocated with bitmap_zalloc() in otx2vf_probe() was not
released in otx2vf_remove(). Unbinding and rebinding the driver therefore
triggers a kmemleak warning:
unreferenced object (size 8):
backtrace:
bitmap_zalloc
otx2vf_probe
Call bitmap_free() in the remove path to fix the leak.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Bo Sun <bo@mboxify.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ->set/create/modify_rxfh() callbacks now pass a valid extack instead
of NULL through netlink [1]. In case of an error, reflect it through
extack instead of a dmesg print.
[1]
commit c0ae03588b ("ethtool: rss: initial RSS_SET (indirection table handling)")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Group RSS-related parameters into a dedicated mlx5e_rss_params
struct. Pass this struct instead of individual arguments when
initializing RSS.
No functional changes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated structure to group RSS initialization parameters
that are only used during RSS creation, and drop the "init" prefix
from pkt_merge_param.
No functional changes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mdev parameter is not used in mlx5e_rss_params_indir_init, so drop
it from the function and update all callers accordingly.
No functional changes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance error messages in MLX5 QoS scheduling depth validation by
including the actual values that caused the validation to fail.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a PF enters switchdev mode, its netdevice becomes the uplink
representor but remains in its current network namespace. All other
representors (VFs, SFs) are created in the netns of the devlink
instance.
If the PF's netns has been moved and differs from the devlink's netns,
enabling switchdev mode would create a state where the OVS control
plane (ovs-vsctl) cannot manage the switch because the PF uplink
representor and the other representors are split across different
namespaces.
To prevent this inconsistent configuration, block the request to enter
switchdev mode if the PF netdevice's netns does not match the netns of
its devlink instance.
As part of this change, the PF's netns is first marked as immutable.
This prevents race conditions where the netns could be changed after
the check is performed but before the mode transition is complete, and
it aligns the PF's behavior with that of the final uplink representor.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing solution of complex matchers splits the match parameters
across two, and exactly two, matchers. For some rather extreme cases
(e.g. IPv6-in-IPv6 tunnels), even two matchers are not enough.
Generalize complex matchers to up to 4 submatchers, and allow easy
extension to more if needed. This resulted in rewriting a large part
of the high-level complex matchers logic, but the original concepts
were rock solid and still hold.
Key characteristics of the new implementation:
* Rework complex matchers to include multiple submatchers. All
submatchers but the first are isolated, in keeping with the existing
paradigm of handing off to specialized matchers that are not otherwise
reachable by regular rules.
* Similarly, rework complex rules to allow splitting them into more than
two simple rules. Rules continue to be refcounted to allow for
multiple complex rules matching on identical parts of the match
params.
* Rely on the match tag, as opposed to the entire match_param, to hash
subrules. This results in lower memory usage.
* Prefer to split the original user-supplied match parameters rather
than the internal field descriptors. This avoids the awkward
transition back and forth between the two formats.
* Allow splitting multi-dword fields across matchers. The only
restrictions that the new implementation impose are: a) any fragment
of an IP address must be accompanied by a match on the IP version; and
b) a single lower dword of an IPv6 address cannot be present in a
submatcher as it would be interpreted as an IPv4 address.
* Employ a greedy algorithm to split the match params, as opposed to
complete search. The results are not optimal, but the algorithm is now
linear compared to exponential. Consequently, we see complex matcher
creation time drops two orders of magnitude in our tests.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_HYPERV and CONFIG_HYPERV_VMBUS separated, change CONFIG_HYPERV
to bool from tristate. CONFIG_HYPERV now becomes the core Hyper-V
hypervisor support, such as hypercalls, clocks/timers, Confidential
Computing setup, PCI passthru, etc. that doesn't involve VMBus or VMBus
devices.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Further consolidation of the VDSO infrastructure and the common data
store.
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
-----BEGIN PGP SIGNATURE-----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=i3UB
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=LZUc
-----END PGP SIGNATURE-----
Merge tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
Fix two minor typos in vmbus_drv.c:
- Correct "reponsible" -> "responsible" in a comment.
- Add missing newline in pr_err() message ("channeln" -> "channel\n").
These are cosmetic changes only and do not affect functionality.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The sysfs attributes out_read_index and out_write_index in
vmbus_drv.c currently use %d to print outbound.current_read_index
and outbound.current_write_index.
These fields are u32 values, so printing them with %d (signed) is
not logically correct. Update the format specifier to %u to
correctly match their type.
No functional change, only fixes the sysfs output format.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The target_cpu_store() function parses the target CPU from the sysfs
buffer using sscanf(). The format string currently uses "%uu", which
is redundant. The compiler ignores the extra "u", so there is no
incorrect parsing at runtime.
Update the format string to use "%u" for clarity and consistency.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which onoly removed it from the core but failed to invoke
the actual device driver shutdown callback. This keeps the timer
active, which prevents power savings and causes pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is a
private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide better
information for analysis.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=A9Tu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
