In order to make the ahash code more clear and modular, split the
monolithic sun8i_ce_hash_run() callback into two parts, prepare and
unprepare (therefore aligning it with the sun8i-ce skcipher code).
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Similar to sun8i-ce skcipher code, move all request-specific data to
request context. This simplifies sun8i_ce_hash_run() and it eliminates
the remaining kmalloc() calls from the digest path.
Since the 'result' buffer in the request ctx struct is used for from-device
DMA, it needs to be properly aligned to CRYPTO_DMA_ALIGN. Therefore:
- increase reqsize by CRYPTO_DMA_PADDING
- add __aligned(CRYPTO_DMA_ALIGN) attribute for the 'result' buffer
- convert all ahash_request_ctx_dma() calls to ahash_request_ctx_dma()
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To remove some duplicated code, directly pass 'struct skcipher_request' and
'struct ce_task' pointers to sun8i_ce_cipher_{prepare,unprepare}.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fold sun8i_ce_cipher_run() into it's only caller, sun8i_ce_cipher_do_one(),
to eliminate a bit of boilerplate.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the iv buffers are allocated per flow during driver probe,
which means that the buffers are shared by all requests. This works
because the driver is not yet truly asynchronous, since it waits inside
do_one_request() for the completion irq.
However, the iv data is request-specific, so it should be part of the
request context. Move iv buffers to request context.
The bounce_iv buffer is aligned to sizeof(u32) to match the 'word address'
requirement for the task descriptor's iv field.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to remove code duplication, factor out task descriptor dumping to
a new function sun8i_ce_dump_task_descriptors().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are 3 instances of '__maybe_unused' annotations that are not needed,
as the variables are always used, so remove them.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Retrieve the dev pointer from tfm context to eliminate some boilerplate
code in sun8i_ce_hash_digest().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using the number of bytes in the request as DMA timeout is really
inconsistent, as large requests could possibly set a timeout of
hundreds of seconds.
Remove the per-channel timeout field and use a single, static DMA
timeout of 3 seconds for all requests.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When
9770b428b1 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again.
Fixes: 9770b428b1 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When "perf lock con" is run in a live mode, with no data file, a host
environment must be provided. Testing missed this as a failing assert
was creating the 1 line of expected stderr output.
$ sudo perf lock con -ab true
perf: util/session.c:195: __perf_session__new: Assertion `host_env != NULL' failed.
Aborted
Fixes: 525a599bad ("perf env: Remove global perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When cross-compiling the perf tool for ARM64, `perf help` may crash
with the following assertion failure:
help.c:122: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.
This happens when the perf binary is not named exactly "perf" or when
multiple "perf-*" binaries exist in the same directory. In such cases,
the `excludes` command list can be empty, which leads to the final
assertion in exclude_cmds() being triggered.
Add a simple guard at the beginning of exclude_cmds() to return early
if excludes->cnt is zero, preventing the crash.
Signed-off-by: hupu <hupu.gm@gmail.com>
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250909094953.106706-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X,
KSZ9477, LAN8814, LAN8804 and LAN8841.
Support for the VSC8201 was removed in commit 51f932c487 ("micrel phy
driver - updated(1)")
Update the help text to reflect that, list families instead of models to
ease future maintenance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network drivers sometimes return -EOPNOTSUPP from their get_ts_info()
method, and this should not cause the reporting of PHY timestamping
information to be prohibited. Handle this error code, and also
arrange for ethtool_net_get_ts_info_by_phc() to return -EOPNOTSUPP
when the method is not implemented.
This allows e.g. PHYs connected to DSA switches which support
timestamping to report their timestamping capabilities.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/E1uwiW3-00000004jRF-3CnC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FXmW
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The brcm,bcm7445-switch-v4.0.txt binding is already covered by
dsa/brcm,sf2.yaml. The listed deprecated properties aren't used anywhere
either.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250909142339.3219200-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for hardware timestamps in (e.g.) the PHY by calling
skb_tx_timestamp() as close as reasonably possible to the point that
the hardware is instructed to send the queued packets.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwKHe-00000004glk-3nkJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment, the way that we currently free gem shmem objects is not
ideal for rust bindings. drm_gem_shmem_free() releases all of the
associated memory with a gem shmem object with kfree(), which means that
for us to correctly release a gem shmem object in rust we have to manually
drop all of the contents of our gem object structure in-place by hand
before finally calling drm_gem_shmem_free() to release the shmem resources
and the allocation for the gem object.
Since the only reason this is an issue is because of drm_gem_shmem_free()
calling kfree(), we can fix this by splitting drm_gem_shmem_free() out into
itself and drm_gem_shmem_release(), where drm_gem_shmem_release() releases
the various gem shmem resources without freeing the structure itself. With
this, we can safely re-acquire the KBox for the gem object's memory
allocation and let rust handle cleaning up all of the other struct members
automatically.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-3-lyude@redhat.com
With gem objects in rust, the most ideal way for us to be able to handle
gem shmem object creation is to be able to handle the memory allocation of
a gem object ourselves - and then have the DRM gem shmem helpers initialize
the object we've allocated afterwards. So, let's split out
drm_gem_shmem_init() from drm_gem_shmem_create() to allow for doing this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-2-lyude@redhat.com
Add compatible and the hardware struct for Tegra256. Tegra256 controllers
use a different parent clock. Hence the timing parameters are different
from the previous generations to meet the expected frequencies.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add compatible for Tegra256 I2C controllers. Tegra256 consists of
8 generic Tegra I2C controllers similar to previous generations.
The parent clock frequency is different in these controllers and
hence the timing parameter values are different from the previous
ones.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Remove existing arbitration timeout macros and use I2C adapter timeout
value for arbitration timeout and forceful bus ownership.
I2C adapter timeout can be configurable from user space, so using it
for arbitration timeout helps in configuring the arbitration timeout
from user space depending on the use case.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Update email address to @oss.qualcomm.com for both the maintainers
from qualcomm, Viken dadhani and Mukesh Kumar Savaliya.
Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,i2c" anymore [1]. Use
"apple,t8103-i2c" as fallback compatible as it is the SoC the driver
and bindings were written for.
This block is compatible with t8103, so just add the new per-SoC
compatible using apple,t8103-i2c as base.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add the sa8775p CCI device string compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The CCI on QCM2290 is the interface for controlling camera sensor over I2C.
It requires only two clocks.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
dw_pcie_edma_irq_verify() already parses device tree for either "dma" (if
there is a single IRQ for all DMA channels) or "dmaX" (if there is one IRQ
per DMA channel), and initializes dma.nr_irqs accordingly.
Additionally, the probing of the eDMA driver will fail if neither "dma"
nor "dmaX" is defined in the device tree.
Therefore there is no need for a glue driver to specify edma.nr_irqs, so
remove the redundant edma.nr_irqs initialization.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-4-cassel@kernel.org
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-3-cassel@kernel.org
Use attack vector controls to select whether VMSCAPE requires mitigation,
similar to other bugs.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The doorbell feature temporarily overrides the inbound translation to point
to the address stored in epf_test->db_bar.phys_addr, i.e., it calls
set_bar() twice without ever calling clear_bar(), as calling clear_bar()
would clear the BAR's PCI address assigned by the host.
Thus, when disabling the doorbell, restore the inbound translation to point
to the memory allocated for the BAR.
Without this, running the PCI endpoint kselftest doorbell test case more
than once would fail.
Fixes: eff0c286aa ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250908161942.534799-2-cassel@kernel.org
Some interrupt controllers require an #address-cells property in their
bindings without requiring a "reg" property to be present.
The current logic used to craft an interrupt-map property in
of_pci_prop_intr_map() is based on reading the #address-cells
property in the interrupt-parent and, if != 0, read the interrupt
parent "reg" property to determine the parent unit address to be
used to create the parent unit interrupt specifier.
First of all, it is not correct to read the "reg" property of
the interrupt-parent with an #address-cells value taken from the
interrupt-parent node, because the #address-cells value define the
number of address cells required by child nodes.
More importantly, for all modern interrupt controllers, the parent
unit address is irrelevant in hardware in relation to the
device <-> interrupt-controller connection and the kernel actually
ignores the parent unit address value when hierarchically parsing
the interrupt-map property (i.e., of_irq_parse_raw()).
For the reasons above, remove the code parsing the interrupt parent "reg"
property in of_pci_prop_intr_map() -- it is not needed and prevents
interrupt-map property generation on systems with an interrupt-controller
that has no "reg" property in its interrupt-controller node -- and leave
the parent unit address always initialized to 0 since it is simply ignored
by the kernel.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/aJms+YT8TnpzpCY8@lpieralisi/
Link: https://patch.msgid.link/20250818093504.80651-1-lpieralisi@kernel.org
Do not kfree the intel_dg_nvm_dev in xe_nvm_fini() right after
auxiliary_device_delete/uninit. The auxiliary_device embeds the
device/kobject (and its name); freeing it too early can race
with asynchronous device_del/udev processing and cause a use-after-free.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Fixes: c28bfb107d ("drm/xe/nvm: add on-die non-volatile memory device")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250911052823.226696-1-nitin.r.gote@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The function parse_events__sort_events_and_fix_groups is needed to fix
uncore events like:
```
$ perf stat -e '{data_read,data_write}' ...
```
so that the multiple uncore PMUs have a group each of data_read and
data_write events.
The same function will perform architecture sorting and group fixing,
in particular for Intel topdown/perf-metric events. Grouping multiple
perf metric events together causes perf_event_open to fail as the
group can only support one. This means command lines like:
```
$ perf stat -e 'slots,slots' ...
```
fail as the slots events are forced into a group together to try to
satisfy the perf-metric event constraints.
As the user may know better than
parse_events__sort_events_and_fix_groups add a 'X' modifier to skip
its regrouping behavior. This allows the following to succeed rather
than fail on the second slots event being opened:
```
$ perf stat -e 'slots,slots:X' -a sleep 1
Performance counter stats for 'system wide':
6,834,154,071 cpu_core/slots/ (50.13%)
5,548,629,453 cpu_core/slots/X (49.87%)
1.002634606 seconds time elapsed
```
Closes: https://lore.kernel.org/lkml/20250822082233.1850417-1-dapeng1.mi@linux.intel.com/
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reported-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass errno to stat_handle_error() rather than reading errno after it has
potentially been clobbered.
Move "skippable" handling first as a skippable event (from the perf stat
default list) should always just be skipped.
Remove logic to skip rather than fail events in a group when they
aren't the group leader.
The original logic was added in commit cb5ef60067 ("perf stat: Error
out unsupported group leader immediately") due to error handling and
opening being together and an assertion being raised.
Not failing this case causes broken groups to not report values,
particularly for topdown events.
Closes: https://lore.kernel.org/lkml/20250822082233.1850417-1-dapeng1.mi@linux.intel.com/
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend arch_evsel__open_strerror() from just AMD IBS events to Intel
core PMU events, to give a message when a slots event isn't a group
leader or when a perf metric event is duplicated within an event
group.
As generating the warning happens after non-arch specific warnings are
generated, disable the missing system wide (-a) flag warning for the
core PMU.
This assumes core PMU events should support per-thread/process and
system-wide.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lzma_is_compressed and gzip_is_compressed functions are declared
to return a "bool" type, but in case of an error (e.g., file open
failure), they incorrectly returned -1.
A bool type is a boolean value that is either true or false.
Returning -1 for a bool return type can lead to unexpected behavior
and may violate strict type-checking in some compilers.
Fix the return value to be false in error cases, ensuring the function
adheres to its declared return type improves for preventing potential
bugs related to type mismatch.
Fixes: 4b57fd44b6 ("perf tools: Add lzma_is_compressed function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250822162506.316844-3-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update perf util arm64_exception_types.h to match the exception class
macros defined in tools/arch/arm64/include/asm/esr.h.
This ensures consistency between perf tooling and the kernel header
definitions for ESR_ELx_EC_* values.
In v2, ESR_ELx_EC_OTHER and ESR_ELx_EC_GCS, which were missing in v1, were
included.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250822145855.53071-2-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix file descriptor leak when callback function returns error. The
function was directly returning without closing fdinfo_dir_fd and
fd_dir when cb() returned non-zero value.
Fixes: 28917cb17f ("perf drm_pmu: Add a tool like PMU to expose DRM information")
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: GuoHan Zhao <zhaoguohan@kylinos.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250908065203.22187-1-zhaoguohan@kylinos.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changed:
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code */},` &
make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via a
`let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Upstream dev news:
- Released v0.0.10 before the changes included in this tag.
- Inform users of the impending rename from `pinned-init` to `pin-init`
(in the kernel the rename already happened).
- More CI improvements.
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQQjEG/HT3UeYLJybLTomd21rZaLygUCaMQqrhIcbG9zc2luQGtl
cm5lbC5vcmcACgkQ6Jndta2Wi8pqhQEAlg9RmSA0Pu4FK5wNM1c4P4S9wAjE+oJL
luYJPrc3mikBAJf8xOoP7XFDKd1FZZ+xOWkgamkf4zDbszOjpX4U/DMD
=ESM8
-----END PGP SIGNATURE-----
Merge tag 'pin-init-v6.18' of https://github.com/Rust-for-Linux/linux into drm-rust-next
pin-init changes for v6.18
Changed:
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code */},` &
make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via a
`let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Upstream dev news:
- Released v0.0.10 before the changes included in this tag.
- Inform users of the impending rename from `pinned-init` to `pin-init`
(in the kernel the rename already happened).
- More CI improvements.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
From: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250912174148.373530-1-lossin@kernel.org
Fix this warning while building the documentation:
Documentation/gpu/xe/xe_configfs:9: drivers/gpu/drm/xe/xe_configfs.c:138:
WARNING: Definition list ends without a blank line; unexpected unindent.
That also makes it better formatted in the output.
While at it, also fix the underline length in "Overview".
Fixes: e2b33fce5e ("drm/xe/configfs: Improve documentation steps")
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250911-wa-bb-cmds-v4-2-c8f7e48f7eae@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Bring it up to reality, better documenting the existing batch buffers,
OOB rules and fixing some typos.
Bspec: 60122
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250911-wa-bb-cmds-v4-1-c8f7e48f7eae@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
mediatek:
- fix potential OF node use-after-free
panthor:
- out-of-bounds check
nouveau:
- revert waitqueue removal for sched teardown
-----BEGIN PGP SIGNATURE-----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=wPUA
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
mediatek:
- fix potential OF node use-after-free
panthor:
- out-of-bounds check
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
