Add "unsafe" quad-underscore versions of the SEV+ guest detectors in
anticipation of hardening the APIs via lockdep assertions. This will allow
adding exceptions for usage that is known to be safe in advance of the
lockdep assertions.
Use a pile of underscores to try and communicate that use of the "unsafe"
shouldn't be done lightly.
No functional change intended.
Link: https://patch.msgid.link/20260310234829.2608037-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide vCPU-scoped accessors for detecting if the vCPU belongs to an SEV,
SEV-ES, or SEV-SNP VM, partly to dedup a small amount of code, but mostly
to better document which usages are "safe". Generally speaking, using the
VM-scoped sev_guest() and friends outside of kvm->lock is unsafe, as they
can get both false positives and false negatives.
But for vCPUs, the accessors are guaranteed to provide a stable result as
KVM disallows initialization SEV+ state after vCPUs are created. I.e.
operating on a vCPU guarantees the VM can't "become" an SEV+ VM, and that
it can't revert back to a "normal" VM.
This will also allow dropping the stubs for the VM-scoped accessors, as
it's relatively easy to eliminate usage of the accessors from common SVM
once the vCPU-scoped checks are out of the way.
No functional change intended.
Link: https://patch.msgid.link/20260310234829.2608037-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Lock and unlock all vCPUs in a single batch when synchronizing SEV-ES VMSAs
during launch finish, partly to dedup the code by a tiny amount, but mostly
so that sev_launch_update_vmsa() uses the same logic/flow as all other SEV
ioctls that lock all vCPUs.
Link: https://patch.msgid.link/20260310234829.2608037-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs).
Fixes: ad27ce1555 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_FINISH command")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This commit adds battery status support for Rock Band 4 PS5 guitars.
The data is reported in the same way as the dualsense in hid-playstation
except it's located at byte 30.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit fixes inconsistent quirk names and also fixes all the
checkpatch.pl issues alongside inconsistent code, it also adds static
asserts to assert struct sizes at compile time.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
hid-sony has been updated with new device support, update the
hid_have_special_driver list accordingly.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for the following instruments:
* Rock Band 1/2/3 Wii/PS3 instruments
* Rock Band 3 PS3 Pro instruments
* DJ Hero Turntable
Wii and PS3 instruments are the same besides the vendor and product ID.
This patch also fixes the mappings for the existing Guitar Hero
instruments.
Co-developed-by: Sanjay Govind <sanjay.govind9@gmail.com>
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Co-developed-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for Tegra PCIe core clock monitoring. Monitoring tracks rate
changes that may occur due to link speed changes and is useful for
detecting core clock changes not initiated by software. Parse the monitor
clock from device tree and enable it when present.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-8-mmaddireddy@nvidia.com
Tegra supports PCIe core clock monitoring for any rate changes that may be
happening because of the link speed changes. This is useful in tracking
any changes in the core clock that are not initiated by the software.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-7-mmaddireddy@nvidia.com
When PCIe link goes down, hardware can retrain the link and try to link up.
To enable this feature, program the APPL_CTRL register with hardware hot
reset with immediate LTSSM enable mode when the controller is operating in
endpoint mode.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-6-mmaddireddy@nvidia.com
The Tegra PCIe Endpoint controller has a single interrupt line that is
shared between multiple interrupt sources:
1. PCIe link state events (link up, hot reset done)
2. Configuration space events (Bus Master Enable changes)
3. DMA completion events
The interrupt is currently registered with IRQF_ONESHOT, which keeps the
interrupt line masked until the threaded handler completes. That blocks
processing of DMA completion events (and other sources) while the
threaded handler runs.
Removing IRQF_ONESHOT is safe for the following reasons:
1. The hard IRQ handler (tegra_pcie_ep_hard_irq) properly acknowledges and
clears all interrupt status bits in hardware before returning. This
prevents interrupt storms and ensures the interrupt controller can
re-enable the interrupt line immediately.
2. The follow-up commit adds handling in the hard IRQ for DMA completion
events. Dropping IRQF_ONESHOT is required so the line is unmasked
after the hard IRQ returns and those events can be serviced without
being blocked by the threaded handler.
3. The threaded handler (tegra_pcie_ep_irq_thread) only processes link-up
notifications and LTR message sending. These operations don't conflict
with DMA interrupt processing and don't require the interrupt line to
remain masked.
This change enables both DMA driver and Endpoint controller driver to share
the interrupt line without blocking each other.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-4-mmaddireddy@nvidia.com
Calibrate 'Pipe to Universal PHY(UPHY)' (P2U) for the Endpoint controller
to request UPHY PLL rate change to 2.5GT/s (Gen 1) during initialization.
This helps to reset stale PLL state from the previous bad link state.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-3-mmaddireddy@nvidia.com
The Root Port's CLKREQ# signal is shared with a downstream PCIe switch and
the endpoints behind it. By default, APPL_PINMUX_CLKREQ_OVERRIDE only
overrides the CLKREQ# input to the controller (so REFCLK is enabled
internally); it does not drive the CLKREQ# output pin low. Some PCIe
switches (e.g. Broadcom PCIe Gen4) forward the Root Port's CLKREQ# to their
downstream side and expect it to be driven low for REFCLK, even when the
switch does not support CLK-PM or ASPM-L1SS. Without driving the output
pin low, link-up can fail between the switch and endpoints.
Clear APPL_PINMUX_CLKREQ_DEFAULT_VALUE so the CLKREQ# output pad is
explicitly driven low. That makes the shared CLKREQ# line low on the wire
and avoids link-up issues with such switches.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-2-mmaddireddy@nvidia.com
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur.
Fixes: 40e2125381 ("PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-15-mmaddireddy@nvidia.com
When Tegra234 is operating in the Endpoint mode with L1.2 enabled, PCIe
link goes down during L1.2 exit. This is because Tegra234 powers up UPHY
PLL immediately without making sure that the REFCLK is stable.
This causes UPHY PLL to fail to lock to the correct frequency and leads to
link going down. There is no hardware fix for this, hence do not advertise
the L1.2 capability in the Endpoint mode.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-14-mmaddireddy@nvidia.com
The ECRC (TLP digest) workaround was originally added for DesignWare
version 4.90a. Tegra234 SoC has 5.00a DWC HW version, which has the same
ATU TD override behaviour, so apply the workaround for 5.00a too.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-13-mmaddireddy@nvidia.com
Tegra194 PCIe driver used custom version numbers to detect Tegra194 and
Tegra234 IPs. With version detect logic added, version check results in
mismatch warnings:
tegra194-pcie 14100000.pcie: Versions don't match (0000562a != 3536322a)
Use HW version numbers which match to PORT_LOGIC.PCIE_VERSION_OFF in
Tegra194 driver to avoid these kernel warnings.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-12-mmaddireddy@nvidia.com
Free up the resources during remove() that were acquired by the DesignWare
driver for the Endpoint mode during probe().
Fixes: bb617cbd81 ("PCI: tegra194: Clean up the exit path for Endpoint mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-11-mmaddireddy@nvidia.com
Host software initiates the L2 sequence. PCIe link is kept in L2 state
during suspend. If Endpoint mode is enabled and the link is up, the
software cannot proceed with suspend. However, when the PCIe Endpoint
driver is probed, but the PCIe link is not up, Tegra can go into suspend
state. So, allow system to suspend in this case.
Fixes: de2bbf2b71 ("PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-10-mmaddireddy@nvidia.com
LTR message should be sent as soon as the Root Port enables LTR in the
Endpoint mode. So set snoop and no-snoop LTR timing and LTR message request
before the PCIe link comes up, so that the LTR message is sent upstream as
soon as LTR is enabled.
Without programming these values, the Endpoint would send latencies of 0 to
the host, which will be inaccurate.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-9-mmaddireddy@nvidia.com
Pre-silicon simulation showed the controller operating in Endpoint mode
initiating link speed change after completing Secondary Bus Reset. Ideally,
the Root Port or the Switch Downstream Port should initiate the link speed
change post SBR, not the Endpoint.
So, as per the hardware team recommendation, disable direct speed change
for the Endpoint mode to prevent it from initiating speed change after the
physical layer link is up at Gen1, leaving speed change ownership with the
host.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-8-mmaddireddy@nvidia.com
The GPIO DT property "nvidia,refclk-select", to select the PCIe reference
clock is optional. Use devm_gpiod_get_optional() to get it.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-7-mmaddireddy@nvidia.com
The PERST# GPIO interrupt is only registered when the controller is
operating in Endpoint mode. In Root Port mode, the PERST# GPIO is
configured as an output to control downstream devices, and no interrupt is
registered for it.
Currently, tegra_pcie_dw_stop_link() unconditionally calls disable_irq()
on pex_rst_irq, which causes issues in Root Port mode where this IRQ is
not registered.
Fix this by only disabling the PERST# IRQ when operating in Endpoint mode,
where the interrupt is actually registered and used to detect PERST#
assertion/deassertion from the host.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-6-mmaddireddy@nvidia.com
As per PCIe CEM r6.0, sec 2.3, the PCIe Endpoint device should be in D3cold
to assert WAKE# pin. The previous workaround that forced downstream devices
to D0 before taking the link to L2 cited PCIe r4.0, sec 5.2, "Link State
Power Management"; however, that spec does not explicitly require putting
the device into D0 and only indicates that power removal may be initiated
without transitioning to D3hot.
Remove the D0 workaround so that Endpoint devices can use wake
functionality (WAKE# from D3). With some Endpoints the link may not enter
L2 when they remain in D3, but the Root Port continues with the usual flow
after PME timeout, so there is no functional issue.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-5-mmaddireddy@nvidia.com
After the link reaches a Detect-related LTSSM state, disable LTSSM so it
does not keep toggling between Polling and Detect. Do this by polling for
the Detect state first, then clearing APPL_CTRL_LTSSM_EN in both
tegra_pcie_dw_pme_turnoff() and pex_ep_event_pex_rst_assert().
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-4-mmaddireddy@nvidia.com
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadPUOQAKCRBFlHeO1qrK
LgOfAP0ccOjRYuACBcwJHsWio19SmVsuzdCjcSX3S6lPsPaaYAD/QuOLCvbKLPUz
3/8yI+jdw8FL9BfI+MI4gUVQAuehJg4=
=oEBZ
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2026-04-06' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.1-rc1 (2nd)
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DHN5GMSIBKO2.2AYOLXDU4X19S@kernel.org
Add support for an ath10k device-tree quirk to skip host cap QMI requests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCadaRegAKCRAsFbugiYzL
e1ilAP9+tmaU/wsnJNNNHifAJ6KEmm6KFH7wj+PU2MFhZb2JEAEA0Il2ngU5fH20
3vM98H4znyIoKGC3ez5uc75d32inGQU=
=oTgu
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260408' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.1 (PR #4)
Add support for an ath10k device-tree quirk to skip host cap QMI requests.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The xfstests' test-case generic/642 finishes with
corrupted HFS+ volume:
sudo ./check generic/642
[sudo] password for slavad:
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.0.0-rc1+ #26 SMP PREEMPT_DYNAMIC Mon Mar 23 17:24:32 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/642 6s ... _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see xfstests-dev/results//generic/642.full for details)
Ran: generic/642
Failures: generic/642
Failed 1 of 1 tests
sudo fsck.hfs -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
invalid free nodes - calculated 1637 header 1260
Invalid B-tree header
Invalid map node
(8, 0)
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0xc000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
The fsck tool detected that Extended Attributes b-tree is corrupted.
Namely, the free nodes number is incorrect and map node
bitmap has inconsistent state. Analysis has shown that during
b-tree closing there are still some lost b-tree's nodes in
the hash out of b-tree structure. But this orphaned b-tree nodes
are still accounted as used in map node bitmap:
tree_cnid 8, nidx 0, node_count 1408, free_nodes 1403
tree_cnid 8, nidx 1, node_count 1408, free_nodes 1403
tree_cnid 8, nidx 3, node_count 1408, free_nodes 1403
tree_cnid 8, nidx 54, node_count 1408, free_nodes 1403
tree_cnid 8, nidx 67, node_count 1408, free_nodes 1403
tree_cnid 8, nidx 0, prev 0, next 0, parent 0, num_recs 3, type 0x1, height 0
tree_cnid 8, nidx 1, prev 0, next 0, parent 3, num_recs 1, type 0xff, height 1
tree_cnid 8, nidx 3, prev 0, next 0, parent 0, num_recs 1, type 0x0, height 2
tree_cnid 8, nidx 54, prev 29, next 46, parent 3, num_recs 0, type 0xff, height 1
tree_cnid 8, nidx 67, prev 8, next 14, parent 3, num_recs 0, type 0xff, height 1
This issue happens in hfs_bnode_split() logic during detection
the possibility of moving half ot the records out of the node.
The hfs_bnode_split() contains a loop that implements
a roughly 50/50 split of the B-tree node's records by scanning
the offset table to find where the data crosses the node's midpoint.
If this logic detects the incapability of spliting the node, then
it simply calls hfs_bnode_put() for newly created node. However,
node is not set as HFS_BNODE_DELETED and real deletion of node
doesn't happen. As a result, the empty node becomes orphaned but
it is still accounted as used. Finally, fsck tool detects this
inconsistency of HFS+ volume.
This patch adds call of hfs_bnode_unlink() before hfs_bnode_put()
for the case if new node cannot be used for spliting the existing
node.
sudo ./check generic/642
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.0.0-rc1+ #26 SMP PREEMPT_DYNAMIC Fri Apr 3 12:39:13 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/642 40s ... 39s
Ran: generic/642
Passed all 1 tests
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/242
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-6-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
In hfsplus_init_header_node() when node_count > 63488
(header bitmap capacity), the code calculates map_nodes,
subtracts them from free_nodes, and marks their positions
used in the bitmap. However, it doesn't write the actual
map node structure (type, record offsets, bitmap) for
those physical positions, only node 0 is written.
This patch reworks hfsplus_create_attributes_file()
logic by introducing a specialized method of
hfsplus_init_map_node() and writing the allocated
map b-tree's nodes by means of
hfsplus_write_attributes_file_node() method.
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-5-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
The hfs_bmap_alloc() and hfs_bmap_free() modify
the b-tree's counters and nodes' bitmap of b-tree.
However, hfs_btree_write() synchronizes the state of
in-core b-tree's counters and node's bitmap with
b-tree's descriptor in header node. Postponing this
synchronization could result in inconsistent state of
file system volume. This patch adds calling of
hfs_btree_write() in hfs_bmap_alloc() and hfs_bmap_free()
methods.
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-4-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Currently, we check only -EINVAL error code in hfs_bmap_free()
after calling the hfs_bmap_clear_bit(). It means that other
error codes will be silently ignored. This patch adds the checking
of all other error codes.
cc: Shardul Bankar <shardul.b@mpiricsoftware.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-3-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
The HFS_BNODE_DELETED flag is checked in hfs_bnode_put()
under locked tree->hash_lock. This patch adds locking
for the case of setting the HFS_BNODE_DELETED flag in
hfs_bnode_unlink() with the goal to avoid potential
race conditions.
The hfs_btree_write() method should be called under
tree->tree_lock. This patch reworks logic by adding
locking the tree->tree_lock for the calls of
hfs_btree_write() in hfsplus_cat_write_inode() and
hfsplus_system_write_inode().
This patch adds also the lockdep_assert_held() in
hfs_bmap_reserve(), hfs_bmap_alloc(), and hfs_bmap_free().
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmnWuXcACgkQpmLzj2vt
YEnxBA/+IUv7shC+2A9VOmVpPKvF7aP82hyUAaALF0JaUtGuwmKNuMy4g13S+go/
5b6MWDlZ2pjN5lY6jFBVLcxfCysKKS3BKgfPza3y0PK1CoVeXzWniTuVjaHY9Mi+
+I64gAa/Ss1C872meBKvzNvgRnHzDFy6v7bp2Ly57Elack9ZZal6KfXBB3sMkVVB
VCcFAODhiPbr4lgRlMdn6WIEnbNM3TAkmPUKTb4iyOV5qyB5/JQPWT7oqTv0FV6A
z8AYAMVmpVFZyQT4NMKFdNPumziPTp4sQZuo9Wt8ybQuIlzaw1E1npkooNU9mfZd
suKwQAEFnGDWA0T/5rySQ9c2P732PyBgGXpTzPAUUVmsK+LYD/CK7gkCkfursDoI
RJQ8KE/RurQ7OKg8ABFpMw3OnmOfpwH7R4/EJ02PbXFEHWXGt37DrRiqJ5ud1UOj
khm6b+nF1NbLzg+B5fZP7DtlPC76wOXHlAbiFloqEkG6gJl0fLfhmgFi5Pg/GZ92
eWJdUJ5ECnJL9UL2FTDxmFEcIyNBrZh+TS0MHdfvhSUHoyGWO5WNzzTqB/RCrgBF
UVthzr/kSuvIkXbdjG1jDD/y+GHMVjv7HSSeh1p/l/1QfWljk6cglpl6LecaHC2Z
ee2Ra2Jnw7l8PvQq6VH9WkRU94CtQtCHEyztjPW9IaR8CQk+2Oo=
=KzYV
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- handling of new keycodes for contextual AI usages (Akshai Murari)
- fix for UAF in hid-roccat (Benoît Sevens)
- deduplication of error logging in amd_sfh (Maximilian Pezzullo)
- various device-specific quirks and device ID additions (Even Xu, Lode
Willems, Leo Vriska)
* tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Input: add keycodes for contextual AI usages (HUTRR119)
HID: Kysona: Add support for VXE Dragonfly R1 Pro
HID: amd_sfh: don't log error when device discovery fails with -EOPNOTSUPP
HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3
HID: roccat: fix use-after-free in roccat_report_event
HID: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
HID: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
On surprise link down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
and Recovery.RcvrSpeed transit times are 24 ms and 48 ms respectively, so
the total time from L0 to Detect is ~96 ms. Increase the poll timeout to
120 ms to account for this.
While at it, add LTSSM state defines for Detect-related states and use them
in the poll condition. Use readl_poll_timeout() instead of
readl_poll_timeout_atomic() in tegra_pcie_dw_pme_turnoff() since that path
runs in non-atomic context.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-3-mmaddireddy@nvidia.com
As per PCIe r7.0, sec 5.3.3.2.1, after sending PME_Turn_Off message, Root
Port should wait for 1-10 msec for PME_TO_Ack message. Currently, driver is
polling for 10 msec with 1 usec delay which is aggressive. Use existing
macro PCIE_PME_TO_L2_TIMEOUT_US to poll for 10 msec with 1 msec delay.
Since this function is used in non-atomic context only, use non-atomic poll
function.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-2-mmaddireddy@nvidia.com
Bugzilla 217447 points out that ftrace bitmask fields still use the
legacy dynamic-array format, which makes trace consumers treat them
as unsigned long arrays instead of bitmaps.
This is visible in the ipi events today: ipi_send_cpumask already
reports its CPU mask as '__data_loc cpumask_t', but ipi_raise still
exposes target_cpus as '__data_loc unsigned long[]'.
Switch ipi_raise to __cpumask() and the matching helpers so its
tracefs format matches the existing cpumask representation used by
the other ipi event. The underlying storage size stays the same, but
trace data consumers can now recognize the field as a cpumask
directly.
Link: https://patch.msgid.link/20260406162434.40767-1-create0818@163.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217447
Signed-off-by: CaoRuichuang <create0818@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e4d32142d1 ("tracing: Fix tracefs mount options") moved the
option application from tracefs_fill_super() to tracefs_reconfigure()
called from tracefs_get_tree(). This fixed mount options being ignored
on user-space mounts when the superblock already exists, but introduced
a regression for the initial kernel-internal mount.
On the first mount (via simple_pin_fs during init), sget_fc() transfers
fc->s_fs_info to sb->s_fs_info and sets fc->s_fs_info to NULL. When
tracefs_get_tree() then calls tracefs_reconfigure(), it sees a NULL
fc->s_fs_info and returns early without applying any options. The root
inode keeps mode 0755 from simple_fill_super() instead of the intended
TRACEFS_DEFAULT_MODE (0700).
Furthermore, even on subsequent user-space mounts without an explicit
mode= option, tracefs_apply_options(sb, true) gates the mode behind
fsi->opts & BIT(Opt_mode), which is unset for the defaults. So the
mode is never corrected unless the user explicitly passes mode=0700.
Restore the tracefs_apply_options(sb, false) call in tracefs_fill_super()
to apply default permissions on initial superblock creation, matching
what debugfs does in debugfs_fill_super().
Cc: stable@vger.kernel.org
Fixes: e4d32142d1 ("tracing: Fix tracefs mount options")
Link: https://patch.msgid.link/20260404134747.98867-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The Trust Philips SPK6327 keyboard (USB ID 145f:024b) has a broken HID
descriptor on interface 1. Byte 101 is 0x00 (Input Array) but should be
0x02 (Input Variable), causing LCtrl, LAlt, Super, RAlt, RCtrl and
RShift to all report as LShift on Linux.
This BPF fix patches byte 101 at runtime fixing all affected modifier
keys.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/234
Signed-off-by: muhammed Rishal <muhammedrishal7777777@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Currently the kernel is scheduled to do this call by itself, but it
requires a kernel v6.18 at least to have the INPUT_PROP set. For older
kernels, we can try to query the property from a HID-BPF probe, and set
a udev property based on that. This way we can provide the information
to old kernels without modifying them.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/220
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We want udev-hid-bpf to be able to set udev properties by printing them
out after the BPF object has been loaded. This allows to make a query to
the device, and set a udev prop based on the answer.
Because the way udev works, the properties are cleared on bind/unbind,
and we need a way to store them. After several attempts to keep the
property alive without re-running the udev-hid-bpf tool to communicate
with the device, it came out that HID-BPF maps are pinned in the bpffs
and we can then query them.
So the following would export a UDEV property in the bpffs:
EXPORT_UDEV_PROP(HID_FOO, 32);
SEC("syscall")
int probe(struct hid_bpf_probe_args *ctx)
{
const char *foo = "foo";
UDEV_PROP_SPRINTF(HID_FOO, "%s", foo);
return 0;
}
Then, we can debug it with a simple cat:
sudo cat /sys/fs/bpf/hid/.../UDEV_PROP_HID_FOO
0: {['f','o','o',],}
This way, the property is always accessible without talking to the
device
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/220
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
udev-hid-bpf is now capable of injecting the parsed report descriptor in
the program. Provide the macros required for it.
Sync up from udev-hid-bpf commits:
bpf: inject the parsed report descriptor in HID_REPORT_DESCRIPTOR
hid_bpf_helpers: provide iterator macros for walking the HID report descriptor
hid_bpf_helpers: Add extract_bits function
bpf: add hid_usages.h
bpf: move the report descriptor structs into their own header
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/221
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/228
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
BPF has bpf_htons and friends but those only work with data in Big
Endian format. HID is little endian so we need our own macros.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/221
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Combination of 2 udev-hid-bpf commits:
bpf: hid_bpf_helpers: provide a cleanup function for hid_bpf_release_context
bpf: helpers: add guard(bpf_spin) macro
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/221
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On udev-hid-bpf, we are now getting warnings here, shut them off.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/227
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
io_uring_enter() and io_uring_register() end up having duplicated code
for getting a ctx from a passed in file descriptor, for either a
registered ring descriptor or a normal file descriptor. Move the
io_uring_register_get_file() into io_uring.c and name it a bit more
generically, and use it from both callsites rather than have that logic
and handling duplicated.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
