Johan Hovold says:
====================
nfc: refactor USB endpoint lookups
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
====================
Link: https://patch.msgid.link/20260330103655.1672331-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330103655.1672331-4-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330103655.1672331-3-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johan Hovold says:
====================
net: refactor USB endpoint lookups
Use the common USB helpers for looking up bulk and interrupt endpoints
instead of open coding.
====================
Link: https://patch.msgid.link/20260330102611.1671546-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common USB helpers for looking up bulk and interrupt endpoints
instead of a custom implementation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330102611.1671546-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ethtool op to advertise TX timestamping. Insert a
skb_tx_timestamp call in __efx_enqueue_skb.
Signed-off-by: Izabela Bakollari <ibakolla@redhat.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260330063236.247057-1-ibakolla@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test authors need to know about variants, existing tests don't use
them because variants are relatively recent.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260331001930.3411279-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BCM84891 and BCM84892 are 10GBASE-T PHYs in the same family as the
BCM84881, sharing the register map and most callbacks. They add USXGMII
as a host interface mode.
bcm8489x_config_init() is separate from bcm84881_config_init(): it
allows only USXGMII (the only host mode available on the tested
hardware) and clears MDIO_CTRL1_LPOWER, which is set at boot on the
tested platform. Does not recur on ifdown/ifup, cable events, or
link-partner advertisement changes, so config_init is sufficient.
For USXGMII, read_status() skips the 0x4011 host-mode register: it
returns the same value regardless of negotiated copper speed (USXGMII
symbol replication). Speed comes from phy_resolve_aneg_linkmode() via
standard C45 AN resolution.
Tested on TRENDnet TEG-S750 (RTL9303 + 1x BCM84891 + 4x BCM84892)
running OpenWrt, where the MDIO controller driver is currently
OpenWrt-specific. Link verified at 100M, 1G, 2.5G, 10G.
Signed-off-by: Daniel Wagner <wagner.daniel.t@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260330225310.2801264-1-wagner.daniel.t@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call mxl862xx_host_shutdown() in case dsa_register_switch() returns
an error, so any still pending crc_err_work get canceled.
Fixes: a319d0c8c8 ("net: dsa: mxl862xx: add CRC for MDIO communication")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/3fd163f5bb88de426ca9847549f94b4296170ef0.1774911025.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the lib/crypto/ files that include <crypto/algapi.h> need it only
for the transitive inclusion of <crypto/utils.h> (and not all the
traditional crypto API stuff that the rest of <crypto/algapi.h> is
filled with), replace these inclusions with direct inclusions of
<crypto/utils.h>.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260331024438.51783-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
aes_encrypt() now uses AES instructions when available instead of always
using table-based code. AES instructions are constant-time and don't
benefit from disabling IRQs as a constant-time hardening measure.
In fact, on two architectures (arm and riscv) disabling IRQs is
counterproductive because it prevents the AES instructions from being
used. (See the may_use_simd() implementation on those architectures.)
Therefore, let's remove the IRQ disabling/enabling and leave the choice
of constant-time hardening measures to the AES library code.
Note that currently the arm table-based AES code (which runs on arm
kernels that don't have ARMv8 CE) disables IRQs, while the generic
table-based AES code does not. So this does technically regress in
constant-time hardening when that generic code is used. But as
discussed in commit a22fd0e3c4 ("lib/crypto: aes: Introduce improved
AES library") I think just leaving IRQs enabled is the right choice.
Disabling them is slow and can cause problems, and AES instructions
(which modern CPUs have) solve the problem in a much better way anyway.
Link: https://lore.kernel.org/r/20260331024430.51755-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
aes_encrypt() now uses AES instructions when available instead of always
using table-based code. AES instructions are constant-time and don't
benefit from disabling IRQs as a constant-time hardening measure.
In fact, on two architectures (arm and riscv) disabling IRQs is
counterproductive because it prevents the AES instructions from being
used. (See the may_use_simd() implementation on those architectures.)
Therefore, let's remove the IRQ disabling/enabling and leave the choice
of constant-time hardening measures to the AES library code.
Note that currently the arm table-based AES code (which runs on arm
kernels that don't have ARMv8 CE) disables IRQs, while the generic
table-based AES code does not. So this does technically regress in
constant-time hardening when that generic code is used. But as
discussed in commit a22fd0e3c4 ("lib/crypto: aes: Introduce improved
AES library") I think just leaving IRQs enabled is the right choice.
Disabling them is slow and can cause problems, and AES instructions
(which modern CPUs have) solve the problem in a much better way anyway.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260331024414.51545-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add devicetree overlay for the Seeed Studio BeagleBone HDMI cape, which
provides HDMI output via an ITE IT66121 HDMI bridge and audio support
through McASP.
The cape is designed for BeagleBone Green but is also compatible with
BeagleBone and BeagleBone Black due to pin compatibility.
Link: https://www.seeedstudio.com/Seeed-Studio-BeagleBoner-Green-HDMI-Cape.html
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
The str* family of fortified functions all use member-sized limits
for a while now, so the FORTIFY_STR_OBJECT test is redundant to
FORTIFY_STR_MEMBER. While here, replace the strncpy() use with strscpy(),
as strncpy() is being removed.
Link: https://patch.msgid.link/20260324020726.work.624-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
*_gpl sections are no longer present in the kernel binary.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
These sections are not used anymore and can be removed from vmlinux and
modules during linking.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The *_gpl section are not being used populated by modpost anymore. Hence
the module loader doesn't need to find and process these sections in
modules.
This patch also simplifies symbol finding logic in module loader since
*_gpl sections don't have to be searched anymore.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Read kflagstab section for vmlinux and modules to determine whether
kernel symbols are GPL only.
This patch eliminates the need for fragmenting the ksymtab for infering
the value of GPL-only symbol flag, henceforth stop populating *_gpl
versions of the ksymtab and kcrctab in modpost.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This patch adds the ability to create entries for kernel symbol flag
bitsets in kflagstab. Modpost populates only the GPL-only flag for now.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This patch introduces a __kflagstab section to store symbol flags in a
dedicated data structure, similar to how CRCs are handled in the
__kcrctab.
The flags for a given symbol in __kflagstab will be located at the same
index as the symbol's entry in __ksymtab and its CRC in __kcrctab. This
design decouples the flags from the symbol table itself, allowing us to
maintain a single, sorted __ksymtab. As a result, the symbol search
remains an efficient, single lookup, regardless of the number of flags
we add in the future.
The motivation for this change comes from the Android kernel, which uses
an additional symbol flag to restrict the use of certain exported
symbols by unsigned modules, thereby enhancing kernel security. This
__kflagstab can be implemented as a bitmap to efficiently manage which
symbols are available for general use versus those restricted to signed
modules only.
This section will contain read-only data for values of kernel symbol
flags in the form of an 8-bit bitsets for each kernel symbol. Each bit
in the bitset represents a flag value defined by ksym_flags enumeration.
Petr Pavlu ran a small test to get a better understanding of the
different section sizes resulting from this patch series. He used
v6.17-rc6 together with the openSUSE x86_64 config [1], which is fairly
large. The resulting vmlinux.bin (no debuginfo) had an on-disk size of
58 MiB, and included 5937 + 6589 (GPL-only) exported symbols.
The following table summarizes his measurements and calculations
regarding the sizes of all sections related to exported symbols:
| HAVE_ARCH_PREL32_RELOCATIONS | !HAVE_ARCH_PREL32_RELOCATIONS
Section | Base [B] | Ext. [B] | Sep. [B] | Base [B] | Ext. [B] | Sep. [B]
----------------------------------------------------------------------------------------
__ksymtab | 71244 | 200416 | 150312 | 142488 | 400832 | 300624
__ksymtab_gpl | 79068 | NA | NA | 158136 | NA | NA
__kcrctab | 23748 | 50104 | 50104 | 23748 | 50104 | 50104
__kcrctab_gpl | 26356 | NA | NA | 26356 | NA | NA
__ksymtab_strings | 253628 | 253628 | 253628 | 253628 | 253628 | 253628
__kflagstab | NA | NA | 12526 | NA | NA | 12526
----------------------------------------------------------------------------------------
Total | 454044 | 504148 | 466570 | 604356 | 704564 | 616882
Increase to base [%] | NA | 11.0 | 2.8 | NA | 16.6 | 2.1
The column "HAVE_ARCH_PREL32_RELOCATIONS -> Base" contains the measured
numbers. The rest of the values are calculated. The "Ext." column
represents an alternative approach of extending __ksymtab to include a
bitset of symbol flags, and the "Sep." column represents the approach of
having a separate __kflagstab. With HAVE_ARCH_PREL32_RELOCATIONS, each
kernel_symbol is 12 B in size and is extended to 16 B. With
!HAVE_ARCH_PREL32_RELOCATIONS, it is 24 B, extended to 32 B. Note that
this does not include the metadata needed to relocate __ksymtab*, which
is freed after the initial processing.
Adding __kflagstab as a separate section has a negligible impact, as
expected. When extending __ksymtab (kernel_symbol) instead, the worst
case with !HAVE_ARCH_PREL32_RELOCATIONS increases the export data size
by 16.6%. Note that the larger increase in size for the latter approach
is due to 4-byte alignment of kernel_symbol data structure, instead of
1-byte alignment for the flags bitset in __kflagstab in the former
approach.
Based on the above, it was concluded that introducing __kflagstab makes
sense, as the added complexity is minimal over extending kernel_symbol,
and there is overall simplification of symbol finding logic in the
module loader.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
[Sami: Updated commit message to include details from the cover letter.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The core architectural issue with kernel symbol flags is our reliance on
splitting the main symbol table, ksymtab. To handle a single boolean
property, such as GPL-only, all exported symbols are split across two
separate tables: __ksymtab and __ksymtab_gpl.
This design forces the module loader to perform a separate search on
each of these tables for every symbol it needs, for vmlinux and for all
previously loaded modules.
This approach is fundamentally not scalable. If we were to introduce a
second flag, we would need four distinct symbol tables. For n boolean
flags, this model requires an exponential growth to 2^n tables,
dramatically increasing complexity.
Another consequence of this fragmentation is degraded performance. For
example, a binary search on the symbol table of vmlinux, that would take
only 14 comparison steps (assuming ~2^14 or 16K symbols) in a unified
table, can require up to 26 steps when spread across two tables
(assuming both tables have ~2^13 symbols). This performance penalty
worsens as more flags are added.
To address this, symbol flags is an enumeration used to represent flags
as a bitset, for example a flag to tell if a symbol is GPL only.
The said bitset is introduced in subsequent patches and will contain
values of kernel symbol flags. These bitset will then be used to infer
flag values rather than fragmenting ksymtab for separating symbols with
different flag values, thereby eliminating the need to fragment the
ksymtab.
Link: https://lore.kernel.org/r/20260326-kflagstab-v5-0-fa0796fe88d9@google.com
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
[Sami: Updated the commit message to explain the use case for the series.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Convert the Cortina Systems Gemini Poweroff Controller bindings to
DT schema.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260330110135.10316-2-khushalchitturi@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.
This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.
The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs.
Signed-off-by: Fredric Cover <FredTheDude@proton.me>
Reviewed-by: Henrique Carvalho <[2]henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running veristat across many BPF objects, expected load failures
produce noisy stderr output that obscures actual issues. Gate these
diagnostic messages behind --verbose.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260331172634.57402-2-mykyta.yatsenko5@gmail.com
Add the testing to access the bpf_ringbuf with the map pointer.
"consumer_pos" and "producer_pos" is accessed in this testing. We reserve
128 bytes in the ringbuf to test the producer_pos, which should be
"128 + BPF_RINGBUF_HDR_SZ".
It will be helpful if we want to evaluate the usage of the ringbuf in bpf
prog with the consumer and producer position.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260331070434.10037-1-dongml2@chinatelecom.cn
Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP.
Discarded ring buffer records are still left in the ring buffer and are
only skipped when user space consumes them. This can matter when
BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup
might not wake the consumer, because the discarded record still needs to
be consumed first.
Scenario:
epoll_wait(rb_fd); // blocks
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP);
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup
Document this in bpf_ringbuf_discard() to make the interaction between
discarded records, user-space consumption, and adaptive wakeups explicit.
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com
----
v2: adapt wording per feedback from Andrii.
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU.
Fixes: d3aedd5ebd ("ipv6 flowlabel: Convert hash list to RCU.")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/07351f0ec47bcee289576f39f9354f4a64add6e4.1774855883.git.zcliangcn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This
conversion also adds the interrupts property, as it is used by the driver
and existing DTS files but was not documented in the original binding.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260330054439.9545-1-i.shihao.999@gmail.com
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260331204228.26726-1-alexei.starovoitov@gmail.com
Before now, all CXL memdevs were assumed to have a mailbox-backed
cxl_memdev_state, so poison command checks could safely dereference
the @mds.
With the introduction of Type 2 devices, a memdev may not implement
a mailbox interface, and so there is no associated cxl_memdev_state.
Guard against this case by returning false when @mds is absent.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/20260331005047.2813980-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
If CONFIG_HOTPLUG_CPU is disabled, /sys/devices/system/cpu/cpu*
directories are still populated, so the test fails to correctly detect
that CPU hotplug is not supported.
Fix this by checking for the presence of 'online' files in those
directories instead. The 'online' node is created for the given CPU if
and only if this CPU supports hotplug. So if none of the CPUs have
'online' nodes, it means CPU hotplug is not supported.
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Link: https://lore.kernel.org/r/20260319153825.2813576-1-dmaluka@chromium.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit a5d05b0796 ("pstore/ftrace: Allow immediate recording")
introduced a kernel parameter to enable early-boot collection for
ftrace frontend. But then, if we enable the debugfs later, the
parameter remains set as N. This is not a biggie, things work fine;
but at the same time, why not have both in sync if possible, right?
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260301192704.1263589-1-gpiccoli@igalia.com
Signed-off-by: Kees Cook <kees@kernel.org>
In persistent_ram_iomap(), ioremap() or ioremap_wc() may return NULL on
failure. Currently, if this happens, the function returns NULL without
releasing the memory region acquired by request_mem_region().
This leads to a resource leak where the memory region remains reserved
but unusable.
Additionally, the caller persistent_ram_buffer_map() handles NULL
correctly by returning -ENOMEM, but without this check, a NULL return
combined with request_mem_region() succeeding leaves resources in an
inconsistent state.
This is the ioremap() counterpart to commit 05363abc76 ("pstore:
ram_core: fix incorrect success return when vmap() fails") which fixed
a similar issue in the vmap() path.
Fixes: 404a604338 ("staging: android: persistent_ram: handle reserving and mapping memory")
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260225235406.11790-1-cole@unwrap.rs
Signed-off-by: Kees Cook <kees@kernel.org>
In order to set ECC on ramoops, the parameter "ecc" should be
used. The variable that carries this information is "ramoops_ecc".
Due to some confusion in the parameter setting functions, modinfo
ends-up showing both "ecc" and "ramoops_ecc" as valid parameters,
but only "ecc" is the valid one, hence this fix to the parameter
help text.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260218193940.912143-3-gpiccoli@igalia.com
Signed-off-by: Kees Cook <kees@kernel.org>
Seems the linux/memblock.h inclusion was added early on due
to usage of some memblock allocation routine. But that was
removed, header was forgotten, hence let's remove that.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260218193940.912143-2-gpiccoli@igalia.com
Signed-off-by: Kees Cook <kees@kernel.org>
total_size is sum of record->size and record->ecc_notice_size (ECC: No
errors detected). When ECC is not used, then there is no problem.
When ECC is enabled, then ftrace dump is decoded incorrectly after
restart.
First this affects starting offset calculation, that breaks
reading of all ftrace records.
CPU:66 ts:51646260179894273 3818ffff80008002 fe00ffff800080f0 0x3818ffff80008002 <- 0xfe00ffff800080f0
CPU:66 ts:56589664458375169 3818ffff80008002 ff02ffff800080f0 0x3818ffff80008002 <- 0xff02ffff800080f0
CPU:67 ts:13194139533313 afe4ffff80008002 1ffff800080f0 0xafe4ffff80008002 <- 0x1ffff800080f0
CPU:67 ts:13194139533313 b7d0ffff80008001 100ffff80008002 0xb7d0ffff80008001 <- 0x100ffff80008002
CPU:67 ts:51646260179894273 8de0ffff80008001 202ffff80008002 0x8de0ffff80008001 <- 0x202ffff80008002
Second ECC notice message is printed like ftrace record and as a
result couple of last records are completely wrong.
For example, when the starting offset is fixed:
CPU:0 ts:113 ffffffc00879bd04 ffffffc0080dc08c cpuidle_enter <- do_idle+0x20c/0x290
CPU:0 ts:114 ffffffc00879bd04 ffffffc0080dc08c cpuidle_enter <- do_idle+0x20c/0x290
CPU:100 ts:28259048229270629 6f4e203a4343450a 2073726f72726520 0x6f4e203a4343450a <- 0x2073726f72726520
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260215185156.317394-1-andrej.skvortzov@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
For historical reason, wq_unbound_cpumask is initially set as
intersection of HK_TYPE_DOMAIN, HK_TYPE_WQ and workqueue.unbound_cpus
boot command line option.
At run time, users can update the unbound cpumask via the
/sys/devices/virtual/workqueue/cpumask sysfs file. Creation
and modification of cpuset isolated partitions will also update
wq_unbound_cpumask based on the latest HK_TYPE_DOMAIN cpumask.
The HK_TYPE_WQ cpumask is out of the picture with these runtime updates.
Complete the transition by taking HK_TYPE_WQ out from the workqueue code
and make it depends on HK_TYPE_DOMAIN only from the housekeeping side.
The final goal is to eliminate HK_TYPE_WQ as a housekeeping cpumask type.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
With CONFIG_UBSAN_INTEGER_WRAP being replaced by Overflow Behavior
Types, remove the __signed_wrap function annotation as it is already
unused, and any future work here will use OBT annotations instead.
Link: https://patch.msgid.link/20260331163725.2765789-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
- DMA:
- Rework the DMA coherent API: introduce Coherent<T> as a generalized
container for arbitrary types, replacing the slice-only
CoherentAllocation<T>. Add CoherentBox for memory initialization
before exposing a buffer to hardware (converting to Coherent when
ready), and CoherentHandle for allocations without kernel mapping.
- Add Coherent::init() / init_with_attrs() for one-shot initialization
via pin-init, and from-slice constructors for both Coherent and
CoherentBox
- Add uaccess write_dma() for copying from DMA buffers to userspace
and BinaryWriter support for Coherent<T>
- DRM:
- Add GPU buddy allocator abstraction
- Add DRM shmem GEM helper abstraction
- Allow drm::Device to dispatch work and delayed work items to driver
private data
- Add impl_aref_for_gem_obj!() macro to reduce GEM refcount
boilerplate, and introduce DriverObject::Args for constructor
context
- Add dma_resv_lock helper and raw_dma_resv() accessor on GEM objects
- Clean up imports across the DRM module
- I/O:
- Merged via a signed tag from the driver-core tree: register!() macro
and I/O infrastructure improvements (IoCapable refactor, RelaxedMmio
wrapper, IoLoc trait, generic accessors, write_reg /
LocatedRegister)
- Nova (Core):
- Fix and harden the GSP command queue: correct write pointer
advancing, empty slot handling, and ring buffer indexing; add mutex
locking and make Cmdq a pinned type; distinguish wait vs no-wait
commands
- Add support for large RPCs via continuation records, splitting
oversized commands across multiple queue slots
- Simplify GSP sequencer and message handling code: remove unused
trait and Display impls, derive Debug and Zeroable where applicable,
warn on unconsumed message data
- Refactor Falcon firmware handling: create DMA objects lazily, add
PIO upload support, and use the Generic Bootloader to boot FWSEC on
Turing
- Convert all register definitions (PMC, PBUS, PFB, GC6, FUSE, PDISP,
Falcon) to the kernel register!() macro; add bounded_enum macro to
define enums usable as register fields
- Migrate all DMA usage to the new Coherent, CoherentBox, and
CoherentHandle APIs
- Harden firmware parsing with checked arithmetic throughout FWSEC,
Booter, RISC-V parsing paths
- Add debugfs support for reading GSP-RM log buffers; replace
module_pci_driver!() with explicit module init to support
module-level debugfs setup
- Fix auxiliary device registration for multi-GPU systems
- Various cleanups: import style, firmware parsing refactoring,
framebuffer size logging
- Rust:
- Add interop::list module providing a C linked list interface
- Extend num::Bounded with shift operations, into_bool(), and const
get() to support register bitfield manipulation
- Enable the generic_arg_infer Rust feature and add EMSGSIZE error
code
- Tyr:
- Adopt vertical import style per kernel Rust guidelines
- Clarify driver/device type names and use DRM device type alias
consistently across the driver
- Fix GPU model/version decoding in GpuInfo
- Workqueue:
- Add ARef<T> support for work and delayed work
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCacrovgAKCRBFlHeO1qrK
LqarAQDSUyg2Z+T/z/svAkklfA9fk+J9yG1s4HLuhcLrAvlqlAEA+ZVCXkoGWmsi
2wxE8trNl774CvcL0TFLvWFtBG2wmAs=
=lGBF
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2026-03-30' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.1-rc1
- DMA:
- Rework the DMA coherent API: introduce Coherent<T> as a generalized
container for arbitrary types, replacing the slice-only
CoherentAllocation<T>. Add CoherentBox for memory initialization
before exposing a buffer to hardware (converting to Coherent when
ready), and CoherentHandle for allocations without kernel mapping.
- Add Coherent::init() / init_with_attrs() for one-shot initialization
via pin-init, and from-slice constructors for both Coherent and
CoherentBox
- Add uaccess write_dma() for copying from DMA buffers to userspace
and BinaryWriter support for Coherent<T>
- DRM:
- Add GPU buddy allocator abstraction
- Add DRM shmem GEM helper abstraction
- Allow drm::Device to dispatch work and delayed work items to driver
private data
- Add impl_aref_for_gem_obj!() macro to reduce GEM refcount
boilerplate, and introduce DriverObject::Args for constructor
context
- Add dma_resv_lock helper and raw_dma_resv() accessor on GEM objects
- Clean up imports across the DRM module
- I/O:
- Merged via a signed tag from the driver-core tree: register!() macro
and I/O infrastructure improvements (IoCapable refactor, RelaxedMmio
wrapper, IoLoc trait, generic accessors, write_reg /
LocatedRegister)
- Nova (Core):
- Fix and harden the GSP command queue: correct write pointer
advancing, empty slot handling, and ring buffer indexing; add mutex
locking and make Cmdq a pinned type; distinguish wait vs no-wait
commands
- Add support for large RPCs via continuation records, splitting
oversized commands across multiple queue slots
- Simplify GSP sequencer and message handling code: remove unused
trait and Display impls, derive Debug and Zeroable where applicable,
warn on unconsumed message data
- Refactor Falcon firmware handling: create DMA objects lazily, add
PIO upload support, and use the Generic Bootloader to boot FWSEC on
Turing
- Convert all register definitions (PMC, PBUS, PFB, GC6, FUSE, PDISP,
Falcon) to the kernel register!() macro; add bounded_enum macro to
define enums usable as register fields
- Migrate all DMA usage to the new Coherent, CoherentBox, and
CoherentHandle APIs
- Harden firmware parsing with checked arithmetic throughout FWSEC,
Booter, RISC-V parsing paths
- Add debugfs support for reading GSP-RM log buffers; replace
module_pci_driver!() with explicit module init to support
module-level debugfs setup
- Fix auxiliary device registration for multi-GPU systems
- Various cleanups: import style, firmware parsing refactoring,
framebuffer size logging
- Rust:
- Add interop::list module providing a C linked list interface
- Extend num::Bounded with shift operations, into_bool(), and const
get() to support register bitfield manipulation
- Enable the generic_arg_infer Rust feature and add EMSGSIZE error
code
- Tyr:
- Adopt vertical import style per kernel Rust guidelines
- Clarify driver/device type names and use DRM device type alias
consistently across the driver
- Fix GPU model/version decoding in GpuInfo
- Workqueue:
- Add ARef<T> support for work and delayed work
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DHGH4BLT03BU.ZJH5U52WE8BY@kernel.org
- Fix SCX_KICK_WAIT deadlock where multiple CPUs waiting for each other in
hardirq context form a cycle. Move the wait to a balance callback which
can drop the rq lock and process IPIs.
- Fix inconsistent NUMA node lookup in scx_select_cpu_dfl() where the
waker_node used cpu_to_node() while prev_cpu used
scx_cpu_node_if_enabled(), leading to undefined behavior when per-node
idle tracking is disabled.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwiiQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGVILAP44s30JBpNyJ9JhAiCoTYzxzOXqqGbotnpQckMF
+7WoJAD/Z9dJO/Sw/AH0fX6WVJDmO0QsQvFXLXJBxWy7A5XVAA0=
=2DW5
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix SCX_KICK_WAIT deadlock where multiple CPUs waiting for each other
in hardirq context form a cycle. Move the wait to a balance callback
which can drop the rq lock and process IPIs.
- Fix inconsistent NUMA node lookup in scx_select_cpu_dfl() where
the waker_node used cpu_to_node() while prev_cpu used
scx_cpu_node_if_enabled(), leading to undefined behavior when
per-node idle tracking is disabled.
* tag 'sched_ext-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Add cyclic SCX_KICK_WAIT stress test
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
sched_ext: Fix inconsistent NUMA node lookup in scx_select_cpu_dfl()
- Fix false positive stall reports on weakly ordered architectures where
the lockless worklist/timestamp check in the watchdog can observe stale
values due to memory reordering. Recheck under pool->lock to confirm.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwiew4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGX66AQCT5ZNUV46mQdQU8TXV4qMiAW1gdwoUT+rvcQ9Q
u2jA/AD/S1uHycAWKqA+TTL8NfNvhgyhgq1AVbYUlTRXCz3iwgU=
=BlI5
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Fix false positive stall reports on weakly ordered architectures
where the lockless worklist/timestamp check in the watchdog can
observe stale values due to memory reordering.
Recheck under pool->lock to confirm.
* tag 'wq-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Better describe stall check
workqueue: Fix false positive stall reports
Commit 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
intended to increase the timeout for mq_perf_tests from the default
kselftest limit of 45 seconds to 180 seconds.
Unfortunately, the file storing this information was incorrectly named
`setting` instead of `settings`, causing the kselftest runner not to
pick up the limit and keep using the default 45 seconds limit.
Fix this by renaming it to `settings` to ensure that the kselftest
runner uses the increased timeout of 180 seconds for this test.
Fixes: 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
Cc: <stable@vger.kernel.org> # 5.10.y
Signed-off-by: Simon Liebold <simonlie@amazon.de>
Link: https://lore.kernel.org/r/20260312140200.2224850-1-simonlie@amazon.de
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Fix cgroup rmdir racing with dying tasks. Deferred task cgroup unlink
introduced a window where cgroup.procs is empty but the cgroup is still
populated, causing rmdir to fail with -EBUSY and selftest failures. Make
rmdir wait for dying tasks to fully leave and fix selftests to not depend
on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies. When CPU hotplug removes the last CPU from a v1
cpuset, tasks must be migrated to an ancestor without a
security_task_setscheduler() check that would block the migration.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwibg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXHEAP98nVEKyl7c7+sXYtwOPn8KEhdHkdpHyPZwhpS2
1wLhaQEAm8yO49s7IgvGPWSz0s/gQdmF5/x8RAee0sJsZALvGQg=
=bUUt
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix cgroup rmdir racing with dying tasks.
Deferred task cgroup unlink introduced a window where cgroup.procs
is empty but the cgroup is still populated, causing rmdir to fail
with -EBUSY and selftest failures.
Make rmdir wait for dying tasks to fully leave and fix selftests to
not depend on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies.
When CPU hotplug removes the last CPU from a v1 cpuset, tasks must be
migrated to an ancestor without a security_task_setscheduler() check
that would block the migration.
* tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Skip security check for hotplug induced v1 task migration
cgroup/cpuset: Simplify setsched decision check in task iteration loop of cpuset_can_attach()
cgroup: Fix cgroup_drain_dying() testing the wrong condition
selftests/cgroup: Don't require synchronous populated update on task exit
cgroup: Wait for dying tasks to leave on rmdir
