Add SoC ID table entry for Qualcomm SA8650P.
Signed-off-by: Lei wang <quic_leiwan@quicinc.com>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260321152307.9131-3-rrendec@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add unique ID for Qualcomm SA8650P SoC.
Signed-off-by: Lei wang <quic_leiwan@quicinc.com>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260321152307.9131-2-rrendec@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Get rid of automatic kfree and move allocation down to where it's used.
Use kzalloc_flex as we're dealing with a flexible array member.
Use struct_size to avoid some pointer math.
Add __counted_by for extra runtime analysis. Move the counting variable
assignment to right after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260327025534.7864-1-rosenp@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
zones. The TSENS is compatible with previous generations.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327101225.382493-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
utilizing the same register layouts and clock structures.
However, DSI won't work properly for now until we submit dispcc fixes.
And some DSC enabled panels require DPU timing calculation fixes too.
(hdisplay / width timing round errors cause the fifo error)
Co-developed-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260308064835.479356-5-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a target module and livepatch pair that verify module function
patching via a proc entry. Two test cases cover both the
klp_enable_patch path (target loaded before livepatch) and the
klp_module_coming path (livepatch loaded before target).
Signed-off-by: Pablo Alessandro Santos Hugen <phugen@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20260320201135.1203992-1-phugen@redhat.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add support for the Qualcomm Eliza SoC to the protection domain mapper.
It has the same exact protection domain configuration as SM8550 SoC,
so reuse that.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-eliza-soc-pd-mapper-v1-1-17334d6ab82d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and WiFi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Verified against the datasheet.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-2-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and Wi-Fi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Couldn't verify the swctrl GPIO thus omitted.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-1-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This is already defined in the gpu_zap_shader node in hamoa.dtsi,
there is no need to redefine it.
Signed-off-by: Tobias Heider <tobias.heider@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260328-zap-v1-2-f6810b9b4930@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Most qcom DTs were converted to use the gpu_zap_shader label instead
of patching the gpu node in commit 2377626fd2 ("arm64: dts: qcom:
add gpu_zap_shader label"). This fixes the remaining ones.
Signed-off-by: Tobias Heider <tobias.heider@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260328-zap-v1-1-f6810b9b4930@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some pm subdomains may be left in added to a parent domain state, if
gdsc_add_subdomain_list() function fails in the middle and bails from
a GDSC power domain controller registration out.
Fixes: b489235b4d ("clk: qcom: Support attaching GDSCs to multiple parents")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Link: https://lore.kernel.org/r/20260328012619.832770-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The monaco-evk mezzanine connector supports a robot expansion board that
requires UART6, which is currently disabled. This prevents the expansion
board from exchanging data and control commands.
Enable UART6 and assign the serial2 alias to provide stable device
enumeration for the expansion board.
Signed-off-by: Canfeng Zhuang <canfeng.zhuang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327083101.1343613-3-canfeng.zhuang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The lemans-evk mezzanine connector supports a robot expansion board that
requires UART0, which is currently disabled. This prevents the expansion
board from exchanging data and control commands.
Enable UART0 and assign the serial2 alias to provide stable device
enumeration for the expansion board.
Signed-off-by: Canfeng Zhuang <canfeng.zhuang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327083101.1343613-2-canfeng.zhuang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unless CX is declared as the power-domain of GCC, votes (power and
performance) on the GDSCs it provides will not propagate to the CX,
which might result in under-voltage conditions.
Add the missing power-domains property to associate GCC with RPMHPD_CX.
Fixes: d9d59d105f ("arm64: dts: qcom: Add initial Milos dtsi")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-dt-fix-milos-eliza-gcc-power-domains-v1-2-f14a22c73fe9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order for the GCC votes on the GDSCs it provides to be propagated
to CX, CX needs to be declared as power domain of the GCC.
Document the missing power-domains property to that purpose.
Fixes: 95ba6820a6 ("dt-bindings: clock: qcom: document the Milos Global Clock Controller")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-dt-fix-milos-eliza-gcc-power-domains-v1-1-f14a22c73fe9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
VCNL4000 includes support for regulators. Add regulators listed in the
downstream device tree so they can be powered in during initialization.
VLED supply is missing downstream, so it will be powered on by a dummy.
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330-z00t-cm36686-regulators-v1-1-03e23b03bd70@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
qmp_cdev_set_cur_state() normalizes the requested state to a boolean
(cdev_state = !!state). The existing early-return check compares
qmp_cdev->state == state, which can be wrong if state is non-boolean
(any non-zero value). Compare qmp_cdev->state against cdev_state instead,
so the check matches the effective state and avoids redundant updates.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Fixes: 05589b30b2 ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260329195333.1478090-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Exactly one space is expected before '{' characters, clean
up duplicate whitespaces.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330-knp-space-cleanup-v1-1-0995302f7557@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The llcc_v1_edac_reg_offset table uses 0x2304c for trp_ecc_sb_err_syn0,
which is inconsistent with the surrounding TRP ECC registers (0x2034x)
and with llcc_v2_1_edac_reg_offset, where trp_ecc_sb_err_syn0 is 0x2034c
adjacent to trp_ecc_error_status0/1 at 0x20344/0x20348.
Use 0x2034c for llcc v1 so the SB syndrome register follows the expected
+0x4 progression from trp_ecc_error_status1. This fixes EDAC reading the
wrong register for SB syndrome reporting.
Fixes: c13d7d261e ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330095118.2657362-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For some reason we ended up adding only 4 out of 11 compute cb's for
CDSP, add the missing compute cb. This will also improve the end
user-experience by enabling running multiple AI usecases in parallel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260326154111.2781802-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
famfs needs to look up a dax_device by dev_t when resolving fmap
entries that reference character dax devices.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311daab5-bb212f0b-4e05-4668-bf53-d76fab56be68-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
The fs_dax_get() function should be called by fs-dax file systems after
opening a fsdev dax device. This adds holder_operations, which provides
a memory failure callback path and effects exclusivity between callers
of fs_dax_get().
fs_dax_get() is specific to fsdev_dax, so it checks the driver type
(which required touching bus.[ch]). fs_dax_get() fails if fsdev_dax is
not bound to the memory.
This function serves the same role as fs_dax_get_by_bdev(), which dax
file systems call after opening the pmem block device.
This can't be located in fsdev.c because struct dax_device is opaque
there.
This will be called by fs/fuse/famfs.c in a subsequent commit.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311d8750-75395c22-031b-4d5f-aebe-790dca656b87-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Add a new dax_set_ops() function that allows drivers to set the
dax_operations after the dax_device has been allocated. This is needed
for fsdev_dax where the operations need to be set during probe and
cleared during unbind.
The fsdev driver uses devm_add_action_or_reset() for cleanup consistency,
avoiding the complexity of mixing devm-managed resources with manual
cleanup in a remove() callback. This ensures cleanup happens automatically
in the correct reverse order when the device is unbound.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311d65a0-b9c1419e-f3a0-4afd-b0bd-848f18ff5950-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
fsdev: Add dax_operations for use by famfs.
This replicates the functionality from drivers/nvdimm/pmem.c that
conventional fs-dax file systems (e.g. xfs) use to support dax
read/write/mmap to a daxdev - without which famfs can't sit atop a
daxdev.
- These methods are based on pmem_dax_ops from drivers/nvdimm/pmem.c
- fsdev_dax_direct_access() returns the hpa, pfn and kva. The kva was
newly stored as dev_dax->virt_addr by dev_dax_probe().
- The hpa/pfn are used for mmap (dax_iomap_fault()), and the kva is used
for read/write (dax_iomap_rw())
- fsdev_dax_recovery_write() and dev_dax_zero_page_range() have not been
tested yet. I'm looking for suggestions as to how to test those.
- dax-private.h: add dev_dax->cached_size, which fsdev needs to
remember. The dev_dax size cannot change while a driver is bound
(dev_dax_resize returns -EBUSY if dev->driver is set). Caching the size
at probe time allows fsdev's direct_access path can use it without
acquiring dax_dev_rwsem (which isn't exported anyway).
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311d415a-bd6af0fe-5445-484c-9d39-210b8170b686-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Save the kva from memremap because we need it for iomap rw support.
Prior to famfs, there were no iomap users of /dev/dax - so the virtual
address from memremap was not needed.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311d1d08-dd372cb9-5934-43b8-bef8-089660d04a81-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
The new fsdev driver provides pages/folios initialized compatibly with
fsdax - normal rather than devdax-style refcounting, and starting out
with order-0 folios.
When fsdev binds to a daxdev, it is usually (always?) switching from the
devdax mode (device.c), which pre-initializes compound folios according
to its alignment. Fsdev uses fsdev_clear_folio_state() to switch the
folios into a fsdax-compatible state.
A side effect of this is that raw mmap doesn't (can't?) work on an fsdev
dax instance. Accordingly, The fsdev driver does not provide raw mmap -
devices must be put in 'devdax' mode (drivers/dax/device.c) to get raw
mmap capability.
In this commit is just the framework, which remaps pages/folios compatibly
with fsdax.
Enabling dax changes:
- bus.h: add DAXDRV_FSDEV_TYPE driver type
- bus.c: allow DAXDRV_FSDEV_TYPE drivers to bind to daxdevs
- dax.h: prototype inode_dax(), which fsdev needs
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311cf904-419e9526-bdaf-4daa-97f1-5060b31a5c9f-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Both fs/dax.c:dax_folio_put() and drivers/dax/fsdev.c:
fsdev_clear_folio_state() (the latter coming in the next commit after this
one) contain nearly identical code to reset a compound DAX folio back to
order-0 pages. Factor this out into a shared helper function.
The new dax_folio_reset_order() function:
- Clears the folio's mapping and share count
- Resets compound folio state via folio_reset_order()
- Clears PageHead and compound_head for each sub-page
- Restores the pgmap pointer for each resulting order-0 folio
- Returns the original folio order (for callers that need to advance by
that many pages)
Two intentional differences from the original dax_folio_put() logic:
1. folio->share is cleared unconditionally. This is correct because the DAX
subsystem maintains the invariant that share != 0 only when
mapping == NULL (enforced by dax_folio_make_shared()). dax_folio_put()
ensures share has reached zero before calling this helper, so the
unconditional clear is safe.
2. folio->pgmap is now explicitly restored for order-0 folios. For the
dax_folio_put() caller this is a no-op (reads and writes back the same
field). It is intentional for the upcoming fsdev_clear_folio_state()
caller, which converts previously-compound folios and needs pgmap
re-established for all pages regardless of order.
This simplifies fsdev_clear_folio_state() from ~50 lines to ~15 lines.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311cc6b9-5be7428a-7f16-4774-8f90-a44b88ac5660-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
This function will be used by both device.c and fsdev.c, but both are
loadable modules. Moving to bus.c puts it in core and makes it available
to both.
No code changes - just relocated.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: John Groves <john@groves.net>
Link: https://patch.msgid.link/0100019d311c90eb-a582ff97-93ba-49f3-8140-6c5c4bf8bc62-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Commit 4a2d5f663d ("i2c: Enable compile testing for more drivers")
enabled compile testing of the Tegra i2c driver only for architectures
that explicitly provide readsX() and writesX().
This limitation appears to have been too restrictive since the generic
implementation of these primitives added by commit 9ab3a7a0d2
("asm-generic/io.h: Implement generic {read,write}s*()") predates the
commit in question.
Allow compile testing of the driver on all architectures.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The QCS6490 Rb3Gen2 has a Renesas μPD720201 XHCI controller hanging off
the TC9563 PCIe switch, on this a Genesys Logic GL3590 USB hub provides
two USB Type-A ports and an ASIX AX88179 USB 3.0 Gigabit Ethernet
interface.
The Renesas chip is powered by two regulators controlled through PM7250B
GPIOs 1 and 4, and the power/reset pin is pulled down by PM8350C GPIO 4.
The Genesys chip power is always-on, but the reset pin is controlled
through TLMM GPIO 162.
Describe the Renesas chip on the PCIe bus, with supplies and reset, to
allow it to be brought out of reset and discovered. Then describe the
two peers of the USB hub, with its reset GPIO, to allow this to be
brought out of reset.
The USB Type-A connectors are not described, as they are in no regard
controlled by the operating system.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323-rb3gen2-upd-gl3590-v2-1-073514bf9ed5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Historically, the Qualcomm PCIe controller node (Host bridge) described
all Root Port properties, such as PHY, PERST#, and WAKE#. But to provide
a more accurate hardware description and to support future multi-Root Port
controllers, these properties were moved to the Root Port node in the
devicetree bindings.
Commit 960609b22b ("arm64: dts: qcom: hamoa: Move PHY, PERST, and Wake
GPIOs to PCIe port nodes and add port Nodes for all PCIe ports")
initiated this transition for the Hamoa platform by moving the PHY
property to the Root Port node in hamoa.dtsi. However, it only updated
some platform specific DTS files for PERST# and WAKE#, leaving others in
a "mixed" binding state.
While the PCIe controller driver supports both legacy and Root Port
bindings, It cannot correctly handle a mix of both. In these cases, the
driver parses the PHY from the Root Port node, but fails to find the
PERST# property (which it then assumes is not present, as it is optional).
Consequently, the controller probe succeeds, but PERST# remains
uncontrolled, preventing PCIe endpoints from functioning.
So, fix the incomplete migration by moving the PERST# and WAKE# properties
from the controller node to the Root Port node in all remaining Hamoa
platform DTS files.
Fixes: 960609b22b ("arm64: dts: qcom: hamoa: Move PHY, PERST, and Wake GPIOs to PCIe port nodes and add port Nodes for all PCIe ports")
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330020934.3501247-1-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
xe_device_declare_wedged() runs in the DMA-fence signaling path, where
GFP_KERNEL memory allocations are not allowed. However, registering
xe_device_wedged_fini via drmm_add_action_or_reset() triggers a
GFP_KERNEL allocation.
Fix this by deferring the registration of xe_device_wedged_fini until
late in the driver load sequence. Additionally, drop the wedged PM
reference only if the device is actually wedged in
xe_device_wedged_fini.
Fixes: 452bca0edb ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260326210116.202585-2-matthew.brost@intel.com
(cherry picked from commit b08ceb4438)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When an SVM is closed, the garbage collector work item must be stopped
synchronously and any future queuing must be prevented. Replace
flush_work() with disable_work_sync() to ensure both conditions are
met.
Fixes: 63f6e480d1 ("drm/xe: Add SVM garbage collector")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260227015225.3081787-1-matthew.brost@intel.com
(cherry picked from commit 2247feb9ba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On PTL, older GSC FWs have a bug that can cause them to crash during
PXP invalidation events, which leads to a complete loss of power
management on the media GT. Therefore, we can't use PXP on FWs that
have this bug, which was fixed in PTL GSC build 1396.
Fixes: b1dcec9bd8 ("drm/xe/ptl: Enable PXP for PTL")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-10-daniele.ceraolospurio@intel.com
(cherry picked from commit 6eb04caaa9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
Fixes: ccd3c6820a ("drm/xe/pxp: Decouple queue addition from PXP start")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-9-daniele.ceraolospurio@intel.com
(cherry picked from commit 0850ec7bb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The default case of the PXP suspend switch is incorrectly exiting
without releasing the lock. However, this case is impossible to hit
because we're switching on an enum and all the valid enum values have
their own cases. Therefore, we can just get rid of the default case
and rely on the compiler to warn us if a new enum value is added and
we forget to add it to the switch.
Fixes: 51462211f4 ("drm/xe/pxp: add PXP PM support")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-8-daniele.ceraolospurio@intel.com
(cherry picked from commit f1b5a77fc9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the PXP HW termination fails during PXP start, the normal completion
code won't be called, so the termination will remain uncomplete. To avoid
unnecessary waits, mark the termination as completed from the error path.
Note that we already do this if the termination fails when handling a
termination irq from the HW.
Fixes: f8caa80154 ("drm/xe/pxp: Add PXP queue tracking and session start")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 5d9e708d2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace passes canonical (sign-extended) GPU addresses where bits 63:48
mirror bit 47. The internal GPUVM uses non-canonical form (upper bits
zeroed), so passing raw canonical addresses into GPUVM lookups causes
mismatches for addresses above 128TiB.
Strip the sign extension with xe_device_uncanonicalize_addr() at the
top of xe_vm_madvise_ioctl(). Non-canonical addresses are unaffected.
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260326130843.3545241-13-arvind.yadav@intel.com
(cherry picked from commit 05c8b1cdc5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The page fault handler should reject write/atomic access to read only
VMAs. Add code to handle this in xe_pagefault_service after the VMA
lookup.
v2:
- Apply max line length (Matthew)
Fixes: fb544b8445 ("drm/xe: Implement xe_pagefault_queue_work")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260324152935.72444-7-jonathan.cavitt@intel.com
(cherry picked from commit 714ee6754a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When stm32_ospi_dma_setup() fails, the DMA channels allocated by
stm32_ospi_get_resources() were never released. Add proper cleanup
in the error path.
Fixes: e35a7607e0 ("spi: stm32-ospi: Set DMA maxburst dynamically")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-stm32-ospi-v1-2-142122466412@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When spi_register_controller() fails after reset_control_acquire()
succeeds, the reset control is never released. This causes a resource
leak in the error path.
Add the missing reset_control_release() call in the error path.
Fixes: cf2c3eceb7 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-stm32-ospi-v1-1-142122466412@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, __device_set_driver_override() handles clearing the override
via empty string ("") and newline ("\n") in two separate paths. The "\n"
case also performs an unnecessary memory allocation and immediate free.
Simplify the logic by initializing 'new' to NULL and only allocating
memory if the string length remains non-zero after stripping the
trailing newline.
Reduce code size, improve readability, and avoid unnecessary memory
operations.
No functional change intended.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/driver-core/DGS82WWLXPJ0.2EH4VJSF30UR5@kernel.org/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260325090905.169000-1-hanguidong02@gmail.com
[ Narrow cp's scope to the newline handling block; use scoped_guard().
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The remove() callback returned early if pm_runtime_resume_and_get()
failed, skipping the cleanup of spi controller and other resources.
Remove the early return so cleanup completes regardless of PM resume
result.
Fixes: 79b8a705e2 ("spi: stm32: Add OSPI driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-ospi-v1-1-cc8cf1c82c4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
