follow_pfnmap_start() suffers from two problems:
(1) We are not re-fetching the pmd/pud after taking the PTL
Therefore, we are not properly stabilizing what the lock actually
protects. If there is concurrent zapping, we would indicate to the
caller that we found an entry, however, that entry might already have
been invalidated, or contain a different PFN after taking the lock.
Properly use pmdp_get() / pudp_get() after taking the lock.
(2) pmd_leaf() / pud_leaf() are not well defined on non-present entries
pmd_leaf()/pud_leaf() could wrongly trigger on non-present entries.
There is no real guarantee that pmd_leaf()/pud_leaf() returns something
reasonable on non-present entries. Most architectures indeed either
perform a present check or make it work by smart use of flags.
However, for example loongarch checks the _PAGE_HUGE flag in pmd_leaf(),
and always sets the _PAGE_HUGE flag in __swp_entry_to_pmd(). Whereby
pmd_trans_huge() explicitly checks pmd_present(), pmd_leaf() does not do
that.
Let's check pmd_present()/pud_present() before assuming "the is a present
PMD leaf" when spotting pmd_leaf()/pud_leaf(), like other page table
handling code that traverses user page tables does.
Given that non-present PMD entries are likely rare in VM_IO|VM_PFNMAP, (1)
is likely more relevant than (2). It is questionable how often (1) would
actually trigger, but let's CC stable to be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20260323-follow_pfnmap_fix-v1-1-5b0ec10872b3@kernel.org
Fixes: 6da8e9634b ("mm: new follow_pfnmap API")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(),
damon_sysfs_upd_schemes_stats(), and
damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr.
If nr_contexts is set to 0 via sysfs while DAMON is running, these
functions dereference contexts_arr[0] and cause a NULL pointer
dereference. Add the missing check.
For example, the issue can be reproduced using DAMON sysfs interface and
DAMON user-space tool (damo) [1] like below.
$ sudo damo start --refresh_interval 1s
$ echo 0 | sudo tee \
/sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts
Link: https://patch.msgid.link/20260320163559.178101-3-objecting@objecting.org
Link: https://lkml.kernel.org/r/20260321175427.86000-4-sj@kernel.org
Link: https://github.com/damonitor/damo [1]
Fixes: d809a7c64b ("mm/damon/sysfs: implement refresh_ms file internal work")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Multiple sysfs command paths dereference contexts_arr[0] without first
verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to
0 via sysfs while DAMON is running, causing NULL pointer dereferences.
In more detail, the issue can be triggered by privileged users like
below.
First, start DAMON and make contexts directory empty
(kdamond->contexts->nr == 0).
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/nr_contexts
Then, each of below commands will cause the NULL pointer dereference.
# echo update_schemes_stats > state
# echo update_schemes_tried_regions > state
# echo update_schemes_tried_bytes > state
# echo update_schemes_effective_quotas > state
# echo update_tuned_intervals > state
Guard all commands (except OFF) at the entry point of
damon_sysfs_handle_cmd().
Link: https://lkml.kernel.org/r/20260321175427.86000-3-sj@kernel.org
Fixes: 0ac32b8aff ("mm/damon/sysfs: support DAMOS stats")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning.
Link: https://lkml.kernel.org/r/20260321175427.86000-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260321175427.86000-2-sj@kernel.org
Fixes: f0c5118ebb ("mm/damon/sysfs: catch commit test ctx alloc failure")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The swap readahead path was recently refactored and while doing this, the
order between the charging of the folio in the memcg and the addition of
the folio in the swap cache was inverted.
Since the accounting of the folio is done while adding the folio to the
swap cache and the folio is not charged in the memcg yet, the accounting
is then done at the node level, which is wrong.
Fix this by charging the folio in the memcg before adding it to the swap cache.
Link: https://lkml.kernel.org/r/20260320050601.1833108-1-alex@ghiti.fr
Fixes: 2732acda82 ("mm, swap: use swap cache as the swap in synchronize layer")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kairui Song <kasong@tencent.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a2034 ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f1985 ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mana_gd_ring_doorbell() accesses offsets up to DOORBELL_OFFSET_EQ
(0xFF8) + 8 bytes = 4KB within each doorbell page. A db_page_size
smaller than SZ_4K is fundamentally incompatible with the driver:
doorbell pages would overlap and the device cannot function correctly.
Validate db_page_size at the source and fail the
probe early if the value is below SZ_4K. This ensures the doorbell ID
range check in mana_gd_register_device() can rely on db_page_size
being valid.
Fixes: 89fe91c659 ("net: mana: hardening: Validate doorbell ID from GDMA_REGISTER_DEVICE response")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260325180423.1923060-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for the divide-by-zero in rtsc_min() triggered
when m2sm() converts a large m1 value (e.g. 32gbit) to a u64 scaled
slope reaching 2^32. rtsc_min() stores the difference of two such u64
values (sm1 - sm2) in a u32 variable `dsm`, truncating 2^32 to zero
and causing a divide-by-zero oops in the concave-curve intersection
path. The test configures an HFSC class with m1=32gbit d=1ms m2=0bit,
sends a packet to activate the class, waits for it to drain and go
idle, then sends another packet to trigger reactivation through
rtsc_min().
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260326204310.1549327-2-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260326204310.1549327-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 55cdd0af2b ("ext4: get discard out of jbd2 commit kthread contex")
Cc: stable@kernel.org
Commit 4865c768b5 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups().
Fixes: 4865c768b5 ("ext4: always allocate blocks only from groups inode can use")
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20260326045834.1175822-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_split_extent_at() retries after ext4_ext_insert_extent() fails by
refinding the original extent and restoring its length. That recovery is
only safe for transient resource failures such as -ENOSPC, -EDQUOT, and
-ENOMEM.
When ext4_ext_insert_extent() fails because the extent tree is already
corrupted, ext4_find_extent() can return a leaf path without p_ext.
ext4_split_extent_at() then dereferences path[depth].p_ext while trying to
fix up the original extent length, causing a NULL pointer dereference while
handling a pre-existing filesystem corruption.
Do not enter the recovery path for corruption errors, and validate p_ext
after refinding the extent before touching it. This keeps the recovery path
limited to cases it can actually repair and turns the syzbot-triggered crash
into a proper corruption report.
Fixes: 716b9c23b8 ("ext4: refactor split and convert extents")
Reported-by: syzbot+1ffa5d865557e51cb604@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1ffa5d865557e51cb604
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: hongao <hongao@uniontech.com>
Link: https://patch.msgid.link/EF77870F23FF9C90+20260324015815.35248-1-hongao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260323060836.3452660-1-libaokun@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Currently there is a race in ext4 when reallocating freed inode
resulting in a deadlock:
Task1 Task2
ext4_evict_inode()
handle = ext4_journal_start();
...
if (IS_SYNC(inode))
handle->h_sync = 1;
ext4_free_inode()
ext4_new_inode()
handle = ext4_journal_start()
finds the bit in inode bitmap
already clear
insert_inode_locked()
waits for inode to be
removed from the hash.
ext4_journal_stop(handle)
jbd2_journal_stop(handle)
jbd2_log_wait_commit(journal, tid);
- deadlocks waiting for transaction handle Task2 holds
Fix the problem by removing inode from the hash already in
ext4_clear_inode() by which time all IO for the inode is done so reuse
is already fine but we are still before possibly blocking on transaction
commit.
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://lore.kernel.org/all/abNvb2PcrKj1FBeC@ly-workstation
Fixes: 88ec797c46 ("fs: make insert_inode_locked() wait for inode destruction")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260320090428.24899-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit b98535d091 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call.
Fixes: b98535d091 ("ext4: fix bug_on in start_this_handle during umount filesystem")
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260319120336.157873-1-jiayuan.chen@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Yang Yang says:
====================
bridge/vxlan: harden ND option parsing paths
This series hardens ND option parsing in bridge and vxlan paths.
Patch 1 linearizes the request skb in br_nd_send() before walking ND
options. Patch 2 adds explicit ND option length validation in
br_nd_send(). Patch 3 adds matching ND option length validation in
vxlan_na_create().
====================
Link: https://patch.msgid.link/20260326034441.2037420-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Fixes: 4b29dba9c0 ("vxlan: fix nonfunctional neigh_reduce()")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260326034441.2037420-4-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260326034441.2037420-3-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header.
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260326034441.2037420-2-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now, only EXT4_KUNIT_TESTS=Y testcase will be compiled in 'extents.c'.
To solve this issue, the ext4 test code needs to be decoupled. The
'extents-test' module is compiled into 'ext4-test' module.
Fixes: cb1e0c1d1f ("ext4: kunit tests for extent splitting and conversion")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260314075258.1317579-4-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch targets two internal state machine invariants in checkpoint.c
residing inside functions that natively return integer error codes.
- In jbd2_cleanup_journal_tail(): A blocknr of 0 indicates a severely
corrupted journal superblock. Replaced the J_ASSERT with a WARN_ON_ONCE
and a graceful journal abort, returning -EFSCORRUPTED.
- In jbd2_log_do_checkpoint(): Replaced the J_ASSERT_BH checking for
an unexpected buffer_jwrite state. If the warning triggers, we
explicitly drop the just-taken get_bh() reference and call __flush_batch()
to safely clean up any previously queued buffers in the j_chkpt_bhs array,
preventing a memory leak before returning -EFSCORRUPTED.
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260311041548.159424-1-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline]
Reported-by: syzbot+512459401510e2a9a39f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1659aaaaa8d9d11265d7
Tested-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Reported-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=512459401510e2a9a39f
Tested-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+512459401510e2a9a39f@syzkaller.appspotmail.com
Link: https://patch.msgid.link/tencent_43696283A68450B761D76866C6F360E36705@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code.
Reported-by: syzbot+04c4e65cab786a2e5b7e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=04c4e65cab786a2e5b7e
Signed-off-by: Tejas Bharambe <tejas.bharambe@outlook.com>
Link: https://patch.msgid.link/JH0PR06MB66326016F9B6AD24097D232B897CA@JH0PR06MB6632.apcprd06.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The commit aa373cf550 ("writeback: stop background/kupdate works from
livelocking other works") introduced an issue where unmounting a filesystem
in a multi-logical-partition scenario could lead to batch file data loss.
This problem was not fixed until the commit d92109891f ("fs/writeback:
bail out if there is no more inodes for IO and queued once"). It took
considerable time to identify the root cause. Additionally, in actual
production environments, we frequently encountered file data loss after
normal system reboots. Therefore, we are adding a check in the inode
release flow to verify whether all dirty pages have been flushed to disk,
in order to determine whether the data loss is caused by a logic issue in
the filesystem code.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260303012242.3206465-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5d ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error.
Fixes: 163a203ddb ("ext4: mark block group as corrupt on block bitmap error")
Fixes: 9008a58e5d ("ext4: make the bitmap read routines return real error codes")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260302134619.3145520-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
commit 82f80e2e3b ("ext4: add extent status cache support to kunit tests"),
added ext4_es_register_shrinker() in extents_kunit_init() function but
failed to add the unregister shrinker routine in extents_kunit_exit().
This could cause the following percpu_counters list corruption bug.
ok 1 split unwrit extent to 2 extents and convert 1st half writ
slab kmalloc-4k start c0000002007ff000 pointer offset 1448 size 4096
list_add corruption. next->prev should be prev (c000000004bc9e60), but was 0000000000000000. (next=c0000002007ff5a8).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
cpu 0x2: Vector: 700 (Program Check) at [c000000241927a30]
pc: c000000000f26ed0: __list_add_valid_or_report+0x120/0x164
lr: c000000000f26ecc: __list_add_valid_or_report+0x11c/0x164
sp: c000000241927cd0
msr: 800000000282b033
current = 0xc000000241215200
paca = 0xc0000003fffff300 irqmask: 0x03 irq_happened: 0x09
pid = 258, comm = kunit_try_catch
kernel BUG at lib/list_debug.c:29!
enter ? for help
__percpu_counter_init_many+0x148/0x184
ext4_es_register_shrinker+0x74/0x23c
extents_kunit_init+0x100/0x308
kunit_try_run_case+0x78/0x1f8
kunit_generic_run_threadfn_adapter+0x40/0x70
kthread+0x190/0x1a0
start_kernel_thread+0x14/0x18
2:mon>
This happens because:
extents_kunit_init(test N):
ext4_es_register_shrinker(sbi)
percpu_counters_init() x 4; // this adds 4 list nodes to global percpu_counters list
list_add(&fbc->list, &percpu_counters);
shrinker_register();
extents_kunit_exit(test N):
kfree(sbi); // frees sbi w/o removing those 4 list nodes.
// So, those list node now becomes dangling pointers
extents_kunit_init(test N+1):
kzalloc_obj(ext4_sb_info) // allocator returns same page, but zeroed.
ext4_es_register_shrinker(sbi)
percpu_counters_init()
list_add(&fbc->list, &percpu_counters);
__list_add_valid(new, prev, next);
next->prev != prev // list corruption bug detected, since next->prev = NULL
Fixes: 82f80e2e3b ("ext4: add extent status cache support to kunit tests")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/5bb9041471dab8ce870c191c19cbe4df57473be8.1772381213.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Link: https://patch.msgid.link/20260223123345.14838-2-ytohnuki@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When inode metadata is changed, we sometimes just call
ext4_mark_inode_dirty() to track modified metadata. This copies inode
metadata into block buffer which is enough when we are journalling
metadata. However when we are running in nojournal mode we currently
fail to write the dirtied inode buffer during fsync(2) because the inode
is not marked as dirty. Use explicit ext4_write_inode() call to make
sure the inode table buffer is written to the disk. This is a band aid
solution but proper solution requires a much larger rewrite including
changes in metadata bh tracking infrastructure.
Reported-by: Free Ekanayaka <free.ekanayaka@gmail.com>
Link: https://lore.kernel.org/all/87il8nhxdm.fsf@x1.mail-host-address-is-not-set/
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260216164848.3074-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
recently_deleted() checks whether inode has been used in the near past.
However this can give false positive result when inode table is not
initialized yet and we are in fact comparing to random garbage (or stale
itable block of a filesystem before mkfs). Ultimately this results in
uninitialized inodes being skipped during inode allocation and possibly
they are never initialized and thus e2fsck complains. Verify if the
inode has been initialized before checking for dtime.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260216164848.3074-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Dimitri Daskalakis says:
====================
Fix page fragment handling when PAGE_SIZE > 4K
FBNIC operates on fixed size descriptors (4K). When the OS supports pages
larger than 4K, we fragment the page across multiple descriptors.
While performance testing, I found several issues with our page fragment
handling, resulting in low throughput and potential RX stalls.
====================
Link: https://patch.msgid.link/20260324195123.3486219-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an issue arising when ext4 features has_journal, ea_inode, and encrypt
are activated simultaneously, leading to ENOSPC when creating an encrypted
file.
Fix by passing XATTR_CREATE flag to xattr_set_handle function if a handle
is specified, i.e., when the function is called in the control flow of
creating a new inode. This aligns the number of jbd2 credits set_handle
checks for with the number allocated for creating a new inode.
ext4_set_context must not be called with a non-null handle (fs_data) if
fscrypt context xattr is not guaranteed to not exist yet. The only other
usage of this function currently is when handling the ioctl
FS_IOC_SET_ENCRYPTION_POLICY, which calls it with fs_data=NULL.
Fixes: c1a5d5f6ab ("ext4: improve journal credit handling in set xattr paths")
Co-developed-by: Anthony Durrer <anthonydev@fastmail.com>
Signed-off-by: Anthony Durrer <anthonydev@fastmail.com>
Signed-off-by: Simon Weber <simon.weber.39@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260207100148.724275-4-simon.weber.39@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The rings size_mask represents the number of pages, so we need to
determine the number of page frags when dumping the descriptors.
Fixes: df04373b0d ("eth fbnic: Add debugfs hooks for tx/rx rings")
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260324195123.3486219-3-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FBNIC supports fixed size buffers of 4K. When PAGE_SIZE > 4K, we
fragment the page across multiple descriptors (FBNIC_BD_FRAG_COUNT).
When refilling the BDQ, the correct number of entries are populated,
but tail was only incremented by one. So on a system with 64K pages,
HW would get one descriptor refilled for every 16 we populate.
Additionally, we program the ring size in the HW when enabling the BDQ.
This was not accounting for page fragments, so on systems with 64K pages,
the HW used 1/16th of the ring.
Fixes: 0cb4c0a137 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260324195123.3486219-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations.
Reported-by: syzbot+7de5fe447862fc37576f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7de5fe447862fc37576f
Tested-by: syzbot+7de5fe447862fc37576f@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Link: https://patch.msgid.link/20260207043607.1175976-1-kartikey406@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There are cases where ext4_bio_write_page() gets called for a page which
has no buffers to submit. This happens e.g. when the part of the file is
actually a hole, when we cannot allocate blocks due to being called from
jbd2, or in data=journal mode when checkpointing writes the buffers
earlier. In these cases we just return from ext4_bio_write_page()
however if the page didn't need redirtying, we will leave stale DIRTY
and/or TOWRITE tags in xarray because those get cleared only in
__folio_start_writeback(). As a result we can leave these tags set in
mappings even after a final sync on filesystem that's getting remounted
read-only or that's being frozen. Various assertions can then get upset
when writeback is started on such filesystems (Gerald reported assertion
in ext4_journal_check_start() firing).
Fix the problem by cycling the page through writeback state even if we
decide nothing needs to be written for it so that xarray tags get
properly updated. This is slightly silly (we could update the xarray
tags directly) but I don't think a special helper messing with xarray
tags is really worth it in this relatively rare corner case.
Reported-by: Gerald Yang <gerald.yang@canonical.com>
Link: https://lore.kernel.org/all/20260128074515.2028982-1-gerald.yang@canonical.com
Fixes: dff4ac75ee ("ext4: move keep_towrite handling to ext4_bio_write_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260205092223.21287-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5).
Fixes: c4d3efafcc ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.")
Reported-by: Oskar Kjos <oskar.kjos@hotmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326155138.2429480-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway.
Fixes: ca15a078bd ("sit: generate icmpv6 error when receiving icmpv4 error")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://sashiko.dev/#/patchset/20260326155138.2429480-1-edumazet%40google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Oskar Kjos <oskar.kjos@hotmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326202608.2976021-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit '5f920d5d60 ("ext4: verify fast symlink length")' causes the
generic/475 test to fail during orphan cleanup of zero-length symlinks.
generic/475 84s ... _check_generic_filesystem: filesystem on /dev/vde is inconsistent
The fsck reports are provided below:
Deleted inode 9686 has zero dtime.
Deleted inode 158230 has zero dtime.
...
Inode bitmap differences: -9686 -158230
Orphan file (inode 12) block 13 is not clean.
Failed to initialize orphan file.
In ext4_symlink(), a newly created symlink can be added to the orphan
list due to ENOSPC. Its data has not been initialized, and its size is
zero. Therefore, we need to disregard the length check of the symbolic
link when cleaning up orphan inodes. Instead, we should ensure that the
nlink count is zero.
Fixes: 5f920d5d60 ("ext4: verify fast symlink length")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260131091156.1733648-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
- PMBus driver fixes
* Add mutex protection for regulator operations
* Fix reading from "write-only" attributes
* Mark lowest/average/highest/rated attributes as read-only
* isl68137: Add mutex protection for AVS enable sysfs attributes
* ina233: Fix error handling and sign extension when reading shunt voltage
- adm1177: Fix sysfs ABI violation and current unit conversion
- peci: Fix off-by-one in cputemp_is_visible(), and crit_hyst returning
delta instead of absolute temperature
-----BEGIN PGP SIGNATURE-----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=dKNH
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- PMBus driver fixes:
- Add mutex protection for regulator operations
- Fix reading from "write-only" attributes
- Mark lowest/average/highest/rated attributes as read-only
- isl68137: Add mutex protection for AVS enable sysfs attributes
- ina233: Fix error handling and sign extension when reading shunt voltage
- adm1177: Fix sysfs ABI violation and current unit conversion
- peci: Fix off-by-one in cputemp_is_visible(), and crit_hyst returning
delta instead of absolute temperature
* tag 'hwmon-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Protect regulator operations with mutex
hwmon: (pmbus) Introduce the concept of "write-only" attributes
hwmon: (pmbus) Mark lowest/average/highest/rated attributes as read-only
hwmon: (adm1177) fix sysfs ABI violation and current unit conversion
hwmon: (peci/cputemp) Fix off-by-one in cputemp_is_visible()
hwmon: (peci/cputemp) Fix crit_hyst returning delta instead of absolute temperature
hwmon: (pmbus/isl68137) Add mutex protection for AVS enable sysfs attributes
hwmon: (pmbus/ina233) Fix error handling and sign extension in shunt voltage read
