We already have a helper for resetting an mpam class and component. Hook
it up to resctrl_arch_reset_all_ctrls() and the domain offline path.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
A total of six PCIe controllers can be found on Tegra264. One of them is
used internally for the integrated GPU while the other five can go to a
variety of connectors like full PCIe slots or M.2.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Systems with MPAM support may have a variety of control types at any point
of their system layout. We can only expose certain types of control, and
only if they exist at particular locations.
Start with the well-known caches. These have to be depth 2 or 3 and support
MPAM's cache portion bitmap controls, with a number of portions fewer than
resctrl's limit.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The following warning is observed on the Tegra234 Jetson platforms ...
rtc-nvidia-vrs10 4-003c: /aliases ID 0 not available
This happens because the 'rtc@c2a0000' device is registered before the
vrs10 RTC and so is assigned the 'rtc0' alias. We want the vrs10 RTC to
be the default RTC because this RTC maintains time across power cycles.
Fix this by adding a 'rtc1' alias for the 'rtc@c2a0000' device.
Fixes: b1806f2b4e ("arm64: tegra: Add device-tree node for NVVRS RTC")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT bindings don't allow the clock and reset names to be specified
since there is only a single entry for each.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The snps,blen property of stmmac-axi-config nodes needs to have 7
entries in total, with unsupported burst lengths listed as 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
resctrl has its own data structures to describe its resources. We can't use
these directly as we play tricks with the 'MBA' resource, picking the MPAM
controls or monitors that best apply. We may export the same component as
both L3 and MBA.
Add mpam_resctrl_res[] as the array of class->resctrl mappings we are
exporting, and add the cpuhp hooks that allocated and free the resctrl
domain structures. Only the mpam control feature are considered here and
monitor support will be added later.
While we're here, plumb in a few other obvious things.
CONFIG_ARM_CPU_RESCTRL is used to allow this code to be built even though
it can't yet be linked against resctrl.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
While we trap the guest's attempts to read/write the MPAM control
registers, the hardware continues to use them. Guest-EL0 uses KVM's
user-space's configuration, as the value is left in the register, and
guest-EL1 uses either the host kernel's configuration, or in the case of
VHE, the UNKNOWN reset value of MPAM1_EL1.
We want to force the guest-EL1 to use KVM's user-space's MPAM
configuration. On nVHE rely on MPAM0_EL1 and MPAM1_EL1 always being
programmed the same and on VHE copy MPAM0_EL1 into the guest's
MPAM1_EL1. There is no need to restore as this is out of context once TGE
is set.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Care must be taken when modifying the PARTID and PMG of a task in any
per-task structure as writing these values may race with the task being
scheduled in, and reading the modified values.
Add helpers to set the task properties, and the CPU default value. These
use WRITE_ONCE() that pairs with the READ_ONCE() in mpam_get_regval() to
avoid causing torn values.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAMSM_EL1 sets the MPAM labels, PMG and PARTID, for loads and stores
generated by a shared SMCU. Disable the traps so the kernel can use it and
set it to the same configuration as the per-EL cpu MPAM configuration.
If an SMCU is not shared with other cpus then it is implementation
defined whether the configuration from MPAMSM_EL1 is used or that from
the appropriate MPAMy_ELx. As we set the same, PMG_D and PARTID_D,
configuration for MPAM0_EL1, MPAM1_EL1 and MPAMSM_EL1 the resulting
configuration is the same regardless.
The range of valid configurations for the PARTID and PMG in MPAMSM_EL1 is
not currently specified in Arm Architectural Reference Manual but the
architect has confirmed that it is intended to be the same as that for the
cpu configuration in the MPAMy_ELx registers.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM system registers will be lost if the CPU is reset during PSCI's
CPU_SUSPEND.
Add a PM notifier to restore them.
mpam_thread_switch(current) can't be used as this won't make any changes if
the in-memory copy says the register already has the correct value. In
reality the system register is UNKNOWN out of reset.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Requesters need to populate the MPAM fields for any traffic they send on
the interconnect. For the CPUs these values are taken from the
corresponding MPAMy_ELx register. Each requester may have a limit on the
largest PARTID or PMG value that can be used. The MPAM driver has to
determine the system-wide minimum supported PARTID and PMG values.
To do this, the driver needs to be told what each requestor's limit is.
CPUs are special, but this infrastructure is also needed for the SMMU and
GIC ITS. Call the helper to tell the MPAM driver what the CPUs can do.
The return value can be ignored by the arch code as it runs well before the
MPAM driver starts probing.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: requestor->requester as argued by ispell ]
Signed-off-by: James Morse <james.morse@arm.com>
In anticipation of MPAM being useful remove the CONFIG_EXPERT restriction.
This was done to prevent the driver being enabled before the user-space
interface was wired up.
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Added second paragraph ]
Signed-off-by: James Morse <james.morse@arm.com>
Now that the MPAM system registers are expected to have values that change,
reprogram them based on the previous value when a CPU is brought online.
Previously MPAM's 'default PARTID' of 0 was always used for MPAM in
kernel-space as this is the PARTID that hardware guarantees to
reset. Because there are a limited number of PARTID, this value is exposed
to user-space, meaning resctrl changes to the resctrl default group would
also affect kernel threads. Instead, use the task's PARTID value for
kernel work on behalf of user-space too. The default of 0 is kept for both
user-space and kernel-space when MPAM is not enabled.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
MPAM allows traffic in the SoC to be labeled by the OS, these labels are
used to apply policy in caches and bandwidth regulators, and to monitor
traffic in the SoC. The label is made up of a PARTID and PMG value. The x86
equivalent calls these CLOSID and RMID, but they don't map precisely.
MPAM has two CPU system registers that is used to hold the PARTID and PMG
values that traffic generated at each exception level will use. These can
be set per-task by the resctrl file system. (resctrl is the defacto
interface for controlling this stuff).
Add a helper to switch this.
struct task_struct's separate CLOSID and RMID fields are insufficient to
implement resctrl using MPAM, as resctrl can change the PARTID (CLOSID) and
PMG (sort of like the RMID) separately. On x86, the rmid is an independent
number, so a race that writes a mismatched closid and rmid into hardware is
benign. On arm64, the pmg bits extend the partid.
(i.e. partid-5 has a pmg-0 that is not the same as partid-6's pmg-0). In
this case, mismatching the values will 'dirty' a pmg value that resctrl
believes is clean, and is not tracking with its 'limbo' code.
To avoid this, the partid and pmg are always read and written as a
pair. This requires a new u64 field. In struct task_struct there are two
u32, rmid and closid for the x86 case, but as we can't use them here do
something else. Add this new field, mpam_partid_pmg, to struct thread_info
to avoid adding more architecture specific code to struct task_struct.
Always use READ_ONCE()/WRITE_ONCE() when accessing this field.
Resctrl allows a per-cpu 'default' value to be set, this overrides the
values when scheduling a task in the default control-group, which has
PARTID 0. The way 'code data prioritisation' gets emulated means the
register value for the default group needs to be a variable.
The current system register value is kept in a per-cpu variable to avoid
writing to the system register if the value isn't going to change. Writes
to this register may reset the hardware state for regulating bandwidth.
Finally, there is no reason to context switch these registers unless there
is a driver changing the values in struct task_struct. Hide the whole thing
behind a static key. This also allows the driver to disable MPAM in
response to errors reported by hardware. Move the existing static key to
belong to the arch code, as in the future the MPAM driver may become a
loadable module.
All this should depend on whether there is an MPAM driver, hide it behind
CONFIG_ARM64_MPAM.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
CC: Amit Singh Tomar <amitsinght@marvell.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAMSM_EL1 register controls the MPAM labeling for an SMCU, Streaming
Mode Compute Unit. As there is no MPAM support in KVM, make sure MPAMSM_EL1
accesses trigger an UNDEF.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
When KVM enables or disables MPAM traps to EL2 it clears all other bits in
MPAM2_EL2. Notably, it clears the partition ids (PARTIDs) and performance
monitoring groups (PMGs). Avoid changing these bits in anticipation of
adding support for MPAM in the kernel. Otherwise, on a VHE system with the
host running at EL2 where MPAM2_EL2 and MPAM1_EL1 access the same register,
any attempt to use MPAM to monitor or partition resources for kernel space
would be foiled by running a KVM guest. Additionally, MPAM2_EL2.EnMPAMSM is
always set to 0 which causes MPAMSM_EL1 to always trap. Keep EnMPAMSM set
to 1 when not in a guest so that the kernel can use MPAMSM_EL1.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
To indicate that the configuration, of the controls used by resctrl, in a
RIS need resetting to driver defaults the reset flags in mpam_config are
set. However, these flags are only ever set temporarily at RIS scope in
mpam_reset_ris() and hence mpam_cpu_online() will never reset these
controls to default. As the hardware reset is unknown this leads to unknown
configuration when the control values haven't been configured away from the
defaults.
Use the policy that an unset feature configuration bit means reset. In this
way the mpam_config in the component can encode that it should be in reset
state and mpam_reprogram_msc() will reset controls as needed.
Fixes: 09b89d2a72 ("arm_mpam: Allow configuration to be applied and restored during cpu online")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
[ morse: Removed unused reset flags from config structure ]
Signed-off-by: James Morse <james.morse@arm.com>
Tegra HDMI can be modeled using an OF graph. Reflect this in the
bindings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The six PCIe controllers found on Tegra264 are of two types: one is used
for the internal GPU and therefore is not connected to a UPHY and the
remaining five controllers are typically routed to a PCI slot and have
additional controls for the physical link.
While these controllers can be switched into endpoint mode, this binding
describes the root complex mode only.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The external memory controller found on Tegra210 can use throttling of
the EMC frequency in order to reduce the memory chip temperature. Mark
the memory controller as a cooling device to take advantage of this
functionality.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document the bindings for the memory controller found on Tegra210 SoCs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a compatible string for the USB PHY found on Tegra210 SoCs.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Nyan Blaze and Nyan Big, as well as Jetson Nano (P3450-0000), Darcy
(P2894-0050-A08) and Pixel C (Smaug) were never mentioned. Add them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 takes exactly 6 "reg" property entries, as opposed to Tegra30
which supports only 5 entries.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra124 (and later) DFLL bindings from the free-form text
format to json-schema.
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Each XUSB PHY can be hooked up to a Type C controller via a port
property, so document this in the bindings accordingly.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The per-RIS flag, in_reset_state, indicates whether or not the MSC
registers are in reset state, and allows avoiding resetting when they are
already in reset state. However, when mpam_apply_config() updates the
configuration it doesn't update the in_reset_state flag and so even after
the configuration update in_reset_state can be true and mpam_reset_ris()
will skip the actual register restoration on subsequent resets.
Once resctrl has a MPAM backend it will use resctrl_arch_reset_all_ctrls()
to reset the MSC configuration on unmount and, if the in_reset_state flag
is bogusly true, fail to reset the MSC configuration. The resulting
non-reset MSC configuration can lead to persistent performance restrictions
even after resctrl is unmounted.
Fix by clearing in_reset_state to false immediately after successful
configuration application, ensuring that the next reset operation
properly restores MSC register defaults.
Fixes: 09b89d2a72 ("arm_mpam: Allow configuration to be applied and restored during cpu online")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Acked-by: Ben Horgan <ben.horgan@arm.com>
[Horgan: rewrite commit message to not be specific to resctrl unmount]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Signed-off-by: James Morse <james.morse@arm.com>
Some device tree bindings need to specify a parameter along with a BPMP
phandle reference to designate the ID associated with a given controller
that needs to interoperate with BPMP. Typically this is specified as an
extra cell in the nvidia,bpmp property, so add a helper to parse this ID
while resolving the phandle reference.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This update primarily adds various new commands and MRQs for Tegra264,
but also contains a few new annotations and fixes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
designware: fix resume-probe race causing NULL-deref in amdisp
imx: fix timeout on repeated reads and extra clock at end
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCacZ+jwAKCRDaeAVmJtMt
bgO9AQDjBHFX2CRPIvR8wso6DrSnPreieHyCua7w5RBJA8Y0LAD/QVFHWLqW361t
tHtP7XjhyCM7i58RNREixK7hsMfBQQI=
=crYV
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-fixes for v7.0-rc6
designware: fix resume-probe race causing NULL-deref in amdisp
imx: fix timeout on repeated reads and extra clock at end
The commit bc75c8e507 ("PCI: Rewrite bridge window head alignment
function") did not use if (r_size <= align) check from pbus_size_mem() for
the new head alignment bookkeeping structure (aligns2[]). In some
configurations, this can result in producing a gap into the bridge window
which the resource larger than its alignment cannot fill.
The old alignment calculation algorithm was removed by the subsequent
commit 3958bf16e2 ("PCI: Stop over-estimating bridge window size") which
renamed the aligns2[] array leaving only aligns[] array.
Add the if (r_size <= align) check back to avoid this problem.
Fixes: bc75c8e507 ("PCI: Rewrite bridge window head alignment function")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/b05a6f14-979d-42c9-924c-d8408cb12ae7@roeck-us.net/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-11-ilpo.jarvinen@linux.intel.com
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
window_alignment() lacks prefix. Rename it to pci_min_window_alignment() in
order to include the prefix and also add min to indicate the returned
window alignment is the minimum PCI spec and arch allows.
Also make it available in drivers/pci/pci.h as upcoming changes will need
to call it from outside of setup-bus.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-9-ilpo.jarvinen@linux.intel.com
Caller of pcibios_align_resource() (__find_resource_space()) already aligns
the start address by 'alignment' so aligning is only necessary if align >
alignment.
Change also to use ALIGN() instead of open-coding.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-8-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-7-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/20260324165633.4583-6-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-5-ilpo.jarvinen@linux.intel.com
__find_resource_space() has variable called 'tmp'. Rename it to
'full_avail' to better indicate its purpose.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-4-ilpo.jarvinen@linux.intel.com
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
Add support for ACTMON on Tegra114. This is used to monitor activity from
different components. Based on the collected statistics, the rate at which
the external memory needs to be clocked can be derived.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When FRED was added to the mainline kernel, it was set up as an explicit
opt-in due to the risk of regressions before hardware was available publicly.
Now, Panther Lake (Core Ultra 300 series) has been released, and benchmarking
by Phoronix has shown that it provides a significant performance benefit on
most workloads:
https://www.phoronix.com/review/intel-fred-panther-lake
Accordingly, enable FRED by default if the CPU supports it. FRED can of
course still be disabled via the fred=off command line option.
Touch up Kconfig help too.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://patch.msgid.link/20260325230151.1898287-2-hpa@zytor.com
Both smartphones have capacitive buttons but only P895 supports RMI4
function 1A (0D touch), while P880 exposes buttons area as a region of the
touchscreen.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing charger, MUIC and ADC sensor nodes. Reconfigure USB, set one
of the ADC channels as the fuel gauge temperature sensor and add a battery
thermal zone.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add RGB-DSI bridge and panel nodes to LG Optimus 4X and Vu device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
