Guard notation simplifies code.
Also fix the touchscreen not being marked as suspended when noone has
opened/is using it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously different architectures were using random sources of
differing strength and cost to decide the random kstack offset. A number
of architectures (loongarch, powerpc, s390, x86) were using their
timestamp counter, at whatever the frequency happened to be. Other
arches (arm64, riscv) were using entropy from the crng via
get_random_u16().
There have been concerns that in some cases the timestamp counters may
be too weak, because they can be easily guessed or influenced by user
space. And get_random_u16() has been shown to be too costly for the
level of protection kstack offset randomization provides.
So let's use a common, architecture-agnostic source of entropy; a
per-cpu prng, seeded at boot-time from the crng. This has a few
benefits:
- We can remove choose_random_kstack_offset(); That was only there to
try to make the timestamp counter value a bit harder to influence
from user space [*].
- The architecture code is simplified. All it has to do now is call
add_random_kstack_offset() in the syscall path.
- The strength of the randomness can be reasoned about independently
of the architecture.
- Arches previously using get_random_u16() now have much faster
syscall paths, see below results.
[*] Additionally, this gets rid of some redundant work on s390 and x86.
Before this patch, those architectures called
choose_random_kstack_offset() under arch_exit_to_user_mode_prepare(),
which is also called for exception returns to userspace which were *not*
syscalls (e.g. regular interrupts). Getting rid of
choose_random_kstack_offset() avoids a small amount of redundant work
for the non-syscall cases.
In some configurations, add_random_kstack_offset() will now call
instrumentable code, so for a couple of arches, I have moved the call a
bit later to the first point where instrumentation is allowed. This
doesn't impact the efficacy of the mechanism.
There have been some claims that a prng may be less strong than the
timestamp counter if not regularly reseeded. But the prng has a period
of about 2^113. So as long as the prng state remains secret, it should
not be possible to guess. If the prng state can be accessed, we have
bigger problems.
Additionally, we are only consuming 6 bits to randomize the stack, so
there are only 64 possible random offsets. I assert that it would be
trivial for an attacker to brute force by repeating their attack and
waiting for the random stack offset to be the desired one. The prng
approach seems entirely proportional to this level of protection.
Performance data are provided below. The baseline is v6.18 with rndstack
on for each respective arch. (I)/(R) indicate statistically significant
improvement/regression. arm64 platform is AWS Graviton3 (m7g.metal).
x86_64 platform is AWS Sapphire Rapids (m7i.24xlarge):
+-----------------+--------------+---------------+---------------+
| Benchmark | Result Class | per-cpu-prng | per-cpu-prng |
| | | arm64 (metal) | x86_64 (VM) |
+=================+==============+===============+===============+
| syscall/getpid | mean (ns) | (I) -9.50% | (I) -17.65% |
| | p99 (ns) | (I) -59.24% | (I) -24.41% |
| | p99.9 (ns) | (I) -59.52% | (I) -28.52% |
+-----------------+--------------+---------------+---------------+
| syscall/getppid | mean (ns) | (I) -9.52% | (I) -19.24% |
| | p99 (ns) | (I) -59.25% | (I) -25.03% |
| | p99.9 (ns) | (I) -59.50% | (I) -28.17% |
+-----------------+--------------+---------------+---------------+
| syscall/invalid | mean (ns) | (I) -10.31% | (I) -18.56% |
| | p99 (ns) | (I) -60.79% | (I) -20.06% |
| | p99.9 (ns) | (I) -61.04% | (I) -25.04% |
+-----------------+--------------+---------------+---------------+
I tested an earlier version of this change on x86 bare metal and it
showed a smaller but still significant improvement. The bare metal
system wasn't available this time around so testing was done in a VM
instance. I'm guessing the cost of rdtsc is higher for VMs.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-3-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
kstack_offset was previously maintained per-cpu, but this caused a
couple of issues. So let's instead make it per-task.
Issue 1: add_random_kstack_offset() and choose_random_kstack_offset()
expected and required to be called with interrupts and preemption
disabled so that it could manipulate per-cpu state. But arm64, loongarch
and risc-v are calling them with interrupts and preemption enabled. I
don't _think_ this causes any functional issues, but it's certainly
unexpected and could lead to manipulating the wrong cpu's state, which
could cause a minor performance degradation due to bouncing the cache
lines. By maintaining the state per-task those functions can safely be
called in preemptible context.
Issue 2: add_random_kstack_offset() is called before executing the
syscall and expands the stack using a previously chosen random offset.
choose_random_kstack_offset() is called after executing the syscall and
chooses and stores a new random offset for the next syscall. With
per-cpu storage for this offset, an attacker could force cpu migration
during the execution of the syscall and prevent the offset from being
updated for the original cpu such that it is predictable for the next
syscall on that cpu. By maintaining the state per-task, this problem
goes away because the per-task random offset is updated after the
syscall regardless of which cpu it is executing on.
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Closes: https://lore.kernel.org/all/dd8c37bc-795f-4c7a-9086-69e584d8ab24@arm.com/
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-2-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit().
Fixes: a69839d432 ("net: mana: Add support for auxiliary device")
Cc: stable@vger.kernel.org
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260323165730.945365-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(tcp_congestion_ops)->cwnd_event() is called very often, with
@event oscillating between CA_EVENT_TX_START and other values.
This is not branch prediction friendly.
Provide a new cwnd_event_tx_start pointer dedicated for CA_EVENT_TX_START.
Both BBR and CUBIC benefit from this change, since they only care
about CA_EVENT_TX_START.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 4/4 grow/shrink: 3/1 up/down: 564/-568 (-4)
Function old new delta
bbr_cwnd_event_tx_start - 450 +450
cubictcp_cwnd_event_tx_start - 70 +70
__pfx_cubictcp_cwnd_event_tx_start - 16 +16
__pfx_bbr_cwnd_event_tx_start - 16 +16
tcp_unregister_congestion_control 93 99 +6
tcp_update_congestion_control 518 521 +3
tcp_register_congestion_control 422 425 +3
__tcp_transmit_skb 3308 3306 -2
__pfx_cubictcp_cwnd_event 16 - -16
__pfx_bbr_cwnd_event 16 - -16
cubictcp_cwnd_event 80 - -80
bbr_cwnd_event 454 - -454
Total: Before=25240512, After=25240508, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323234920.1097858-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NetDrvContEnv env context uses tc clsact qdiscs and BPF tc filters
for traffic redirection, but the kernel config options are missing from
the selftests config.
Without them, the tc qdisc installation trips on:
CMD: tc qdisc add dev enp1s0 clsact
EXIT: 2
STDERR: Error: Specified qdisc kind is unknown.
net.lib.py.utils.CmdExitFailure: Command failed
Add CONFIG_NET_CLS_ACT and CONFIG_NET_SCH_INGRESS to enable these tc
options.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260323-config-fixes-for-nk-tests-v2-1-6c505d83e52d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When codel_dequeue() finds an empty queue, it resets vars->dropping
but does not reset vars->first_above_time. The reference CoDel
algorithm (Nichols & Jacobson, ACM Queue 2012) resets both:
dodeque_result codel_queue_t::dodeque(time_t now) {
...
if (r.p == NULL) {
first_above_time = 0; // <-- Linux omits this
}
...
}
Note that codel_should_drop() does reset first_above_time when called
with a NULL skb, but codel_dequeue() returns early before ever calling
codel_should_drop() in the empty-queue case. The post-drop code paths
do reach codel_should_drop(NULL) and correctly reset the timer, so a
dropped packet breaks the cycle -- but the next delivered packet
re-arms first_above_time and the cycle repeats.
For sparse flows such as ICMP ping (one packet every 200ms-1s), the
first packet arms first_above_time, the flow goes empty, and the
second packet arrives after the interval has elapsed and gets dropped.
The pattern repeats, producing sustained loss on flows that are not
actually congested.
Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the
consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms
target), ping at 5 pps under UDP flood:
Before fix: 26% ping packet loss
After fix: 0% ping packet loss
Fix by resetting first_above_time to zero in the empty-queue path
of codel_dequeue(), matching the reference algorithm.
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Fixes: d068ca2ae2 ("codel: split into multiple files")
Co-developed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reported-by: Chris Arges <carges@cloudflare.com>
Tested-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.") swapped
the EEXIST check with the init_srcu_struct, but didn't add cleanup of
the SRCU struct we just allocated in case of error.
Fixes: 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/e77fe499f9a58c547b33b5212b3596dad417cec6.1774025341.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver does not explicitly configure the MAC duplex mode when
bringing the link up. As a result, the MAC may retain a stale duplex
setting from a previous link state, leading to duplex mismatches with
the link partner and degraded network performance.
Update lan743x_phylink_mac_link_up() to set or clear the MAC_CR_DPX_
bit according to the negotiated duplex mode.
This ensures the MAC configuration is consistent with the phylink
resolved state.
Fixes: a5f199a8d8 ("net: lan743x: Migrate phylib to phylink")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260323065345.144915-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mxl862xx: MDIO bus integrity and optimization
The MxL862xx firmware offers opt-in CRC validation on the MDIO/MMD
command interface to guard against bit errors on the bus.
The driver has not used this until now.
This series enables CRC protection on both the command registers (CRC-6)
and data payloads (CRC-16), and reduces MDIO bus traffic by bulk-zeroing
registers instead of writing zero-valued words individually.
====================
Link: https://patch.msgid.link/cover.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Issue the firmware's RST_DATA command before writing data payloads that
contain many zero words. RST_DATA zeroes both the firmware's internal
buffer and the MMD data registers in a single command, allowing the
driver to skip individual MDIO writes for zero-valued words. This
reduces bus traffic for the common case where API structs have many
unused or default-zero fields.
The optimization is applied when at least 5 zero words are found in the
payload, roughly the break-even point against the cost of the extra
RST_DATA command round-trip.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d10bd6ad5df062d0da342c3e0d330550b3d2432b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the firmware's opt-in CRC validation on the MDIO/MMD command
interface to detect bit errors on the bus. The firmware bundles CRC-6
and CRC-16 under a single enable flag, so both are implemented
together.
CRC-6 protects the ctrl and len_ret command registers using a table-
driven 3GPP algorithm. It is applied to every command exchange
including SET_DATA/GET_DATA batch transfers. With CRC enabled, the
firmware encodes its return value as a signed 11-bit integer within
the CRC- protected register fields, replacing the previous 16-bit
interpretation.
CRC-16 protects the data payload using the kernel's crc16() library.
The driver appends a CRC-16 checksum to outgoing data and verifies the
firmware-appended checksum on responses. The checksum is placed at the
exact byte offset where the struct data ends, correctly handling
packed structs with odd sizes by splitting the checksum across word
boundaries. SET_DATA/GET_DATA sub-commands carry only CRC-6.
Upon detection of a CRC error on either side all conduit interfaces
are taken down, triggering all user ports to go down as well. This is
the most feasible option: CRC errors are likely caused either by
broken hardware, or are symptom of overheating. In either case, trying
to resume normal operation isn't reasonable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/620453b9a150bbe5b7ea4224331cb5dc5e57263b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns
Fixes: f2fc6a5458 ("[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespace")
Cc: stable@vger.kernel.org
Signed-off-by: xietangxin <xietangxin@yeah.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: 0287587884 ("net: better IFF_XMIT_DST_RELEASE support")
Link: https://patch.msgid.link/20260312025406.15641-1-xietangxin@yeah.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .parse_request() ethnl operation extracts the relevant attributes
from the netlink request to populate the private req_info.
By passing genl_info as a parameter to this callback, we can use
the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory
parameters.
This macro has the advantage of returning a better error explanation
through the netlink_ext_ack struct.
Convert the eeprom ethnl code to this macro, as it's the only command
yet that has mandatory request parameters.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, .fadvise() doesn't work well if page cache sharing is on
since shared inodes belong to a pseudo fs generated with init_pseudo(),
and sb->s_bdi is the default one &noop_backing_dev_info.
Then, generic_fadvise() will just behave as a no-op if sb->s_bdi is
&noop_backing_dev_info, but as the bdev fs (the bdev fs changes
inode_to_bdi() instead), it's actually NOT a pure memfs.
Let's generate a real bdi for erofs_ishare_mnt instead.
Fixes: d86d7817c0 ("erofs: implement .fadvise for page cache share")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
On 32-bit kernels, 64-bit integers cannot be passed to the division operator:
ld.lld-22: error: undefined symbol: __aeabi_uldivmod
>>> referenced by lontium-lt8713sx.c
>>> drivers/gpu/drm/bridge/lontium-lt8713sx.o:(lt8713sx_firmware_store) in archive vmlinux.a
Since this is a constant number used to divide a size_t, just change the type
to that as well.
Fixes: 4037c6adc1 ("drm/bridge: add support for lontium lt8713sx bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316215920.1993390-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The testing for tracing was triggering a timestamp count issue that was
always off by one. This has been happening for some time but has never
been reported by anyone else. It was finally discovered to be an issue
with the "uptime" (jiffies) clock that happened to be traced and the
internal recursion caused the discrepancy. This would have been much
easier to solve if the clock function being used was displayed when the
error was detected.
Add the clock function to the error output.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260323202212.479bb288@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The commit f35dbac694 ("ring-buffer: Fix to update per-subbuf entries of
persistent ring buffer") was a fix and merged upstream. It is needed for
some other work in the ring buffer. The current branch has the remote
buffer code that is shared with the Arm64 subsystem and can't be rebased.
Merge in the upstream commit to allow continuing of the ring buffer work.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add clock drivers for the EIC7700 SoC. The clock controller on the ESWIN
EIC7700 provides various clocks to different IP blocks within the SoC.
Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com> # ebc77
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Tested-by: Bo Gan <ganboing@gmail.com> # hfp550
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the devres variant of clk_hw_register_divider_parent_data() for
registering a divider clock with parent clk data instead of parent
name.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The quirk flag DSI_PHY_7NM_QUIRK_PRE_V4_1 is renamed to
DSI_PHY_7NM_QUIRK_V4_0 to better reflect the actual hardware revision
it applies to. (Only SM8150 uses it, its hardware revision is 4.0)
No functional change.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707416/
Link: https://lore.kernel.org/r/20260226122958.22555-3-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On current firmware versions, RPI_FIRMWARE_SET_CLOCK_STATE doesn't
actually power off the clock. To achieve meaningful power savings, the
clock rate must be set to the minimum before disabling. This might be
fixed in future firmware releases.
Rather than pushing rate management to clock consumers, handle it
directly in the clock framework's prepare/unprepare callbacks. In
unprepare, set the rate to the minimum before disabling the clock.
In prepare, for clocks marked with `maximize` (currently v3d),
restore the rate to the maximum after enabling.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document FocalTech FT3519 support by adding the compatible. It's 10
point touchscreen, which is compatible with FT3518
Signed-off-by: Bhushan Shah <bhushan.shah@machinesoul.in>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-edt-ft3519-v3-1-5ee91b408ed6@machinesoul.in
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
sizeof returns size_t. Use the zu specifier for it. Fixes on x86-64:
error: format ‘%u’ expects argument of type ‘unsigned int’, but
argument 5 has type ‘long unsigned int’ [-Werror=format=]
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260321034227.3900-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Create read-only debugfs entries for LOGINIT, LOGRM, and LOGINTR, which
are the three primary printf logging buffers from GSP-RM. LOGPMU will
be added at a later date, as it requires support for its RPC message
first.
This patch uses the `pin_init_scope` feature to create the entries.
`pin_init_scope` solves the lifetime issue over the `DEBUGFS_ROOT`
reference by delaying its acquisition until the time the entry is
actually initialized.
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-7-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Create the 'nova_core' root debugfs entry when the driver loads.
Normally, non-const global variables need to be protected by a
mutex. Instead, we use unsafe code, as we know the entry is never
modified after the driver is loaded. This solves the lifetime
issue of the mutex guard, which would otherwise have required the
use of `pin_init_scope`.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Replace the module_pci_driver! macro with an explicit module
initialization using the standard module! macro and InPlaceModule
trait implementation. No functional change intended, with the
exception that the driver now prints a message when loaded.
This change is necessary so that we can create a top-level "nova_core"
debugfs entry when the driver is loaded.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the BinaryWriter trait for Coherent<[u8]>, enabling DMA
coherent allocations to be exposed as readable binary files. The
implementation handles offset tracking and bounds checking, copying data
from the coherent allocation to userspace via write_dma().
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-4-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add UserSliceWriter::write_dma() to copy data from a Coherent<[u8]> to
userspace. This provides a safe interface for copying DMA buffer
contents to userspace without requiring callers to work with raw
pointers.
Because write_dma() and write_slice() have common code, factor that code
out into a helper function, write_raw().
The method handles bounds checking and offset calculation internally,
wrapping the unsafe copy_to_user() call.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260319212658.2541610-3-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes; remove unnecessary turbofish from
cast(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add job that executes the IGT test suite for rk3588-rock-5b.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Qualcomm apq8016 and apq8096 DUTS are moved to Collabora lava
farm. So enable these jobs to use lava and update expectation
files.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Uprev mesa to adapt to the latest changes in Mesa CI, such as:
- LAVA overlay-based firmware handling
- Container/job rule separation
- Removal of the python-artifacts job
- Use lava-job-submitter container to submit jobs
- Use of the Alpine container for LAVA jobs
- Various other CI improvements
- Remove bare-metal jobs and disable apq8016 and apq8096 jobs,
as these have been migrated to the Collabora LAVA farm
- Fix issues with rebase with external fixes branch
- Update expectation files
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
asus-C436FA-Flip-hatch has fewer devices available in the LAVA lab and
drm-ci uses only 2 DUTs, causing tests to time out. Update drm-ci to
use puff instead of hatch so the tests can run on 5 DUTs.
Also increase parallel count for amly jobs to 3.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
