Replace devm_clk_get() followed by clk_prepare_enable() with
devm_clk_get_enabled() for both the "hsspi" and "pll" clocks. This
reduces boilerplate code and error handling, as the managed API
automatically disables the clocks when the device is removed or if
probe fails.
Remove the now-unnecessary clk_disable_unprepare() calls from the
probe error paths and the remove callback. Accordingly, adjust the
error handling labels to direct returns where possible.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/3a187be6d9963645f01caebc1169e06f8804b7a6.1773885292.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
A number of dev_dbg() and dev_err() calls get passed values that are
of __le32 type which does not get noticed by sparse until my variadic
checking patches.
There are a number of these, and we should probably fix these up.
The sparse warnings are numerous so the first few are listed here that
this patch fixes:
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260323175604.19315-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new module `kernel::interop::list` for working with C's doubly
circular linked lists. Provide low-level iteration over list nodes.
Typed iteration over actual items is provided with a `clist_create`
macro to assist in creation of the `CList` type.
Cc: Nikola Djukic <ndjukic@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Gary Guo <gary@garyguo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20260319210722.1543776-1-joelagnelf@nvidia.com
[ * Remove stray empty comment and double blank line in doctest,
* Improve wording and fix a few typos,
* Use markdown emphasis instead of caps,
* Move interop/mod.rs to interop.rs.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
UAPI Changes:
amdxdna:
- Add sensors ioctls
Cross-subsystem Changes:
dma-buf:
- clean pages with helpers
Documenatation:
- devicetree: Add lxd vendor prefix
Core Changes:
buddy:
- improve aligned allocations
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
ttm:
- fix fence signalling
Driver Changes:
amdxdna:
- provide NPU power estimate
- support sensor for column utilization
bridge:
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
ivpu:
- fixes
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
mxsfb:
- lcdif: report probing errors with dev_err_probe()
panel:
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- renesas: Clean up
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- clean up DT bindings of various drivers
panthor:
- fix fence handling
vc4:
- check return value of platform_get_irq_byname()
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmmycX0bFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojt1cH/1OoLz0cc0wZ0VM/f8t/
Ha81Ff4mVOS5j2x3V0m+SZrljKl4qgfTka6CYfhHn9aqVS27pkB2My4vtq6h3EXQ
apfKIqhgMjVpJxin9fbSb29JGt+/NtuUEFbq+s356SF2L5RZ8fGEWmdETsNfItvj
lLZOkvys/9MWRyCjO4pOD6kyJul2Bg+79hJ1H3IdE62WNyVM1FNVcMWIBsWdigBG
o5wJv+RQ9sffD7zNiw122AI+Zr+elCeXekqMZghIP8Su+JkjfEMsr0AGpsqpvFbJ
TsdFR52ZZR4fEzwZZnrn4gTGN3xPSUIpWcSXrOkm7gp5d4ZVE/X9diavrzJFb0vg
uM8=
=TJlw
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-03-12' into drm-rust-next
We need the latest GPU buddy changes from drm-misc-next-2026-03-12 in
drm-rust-next as well, as the Rust abstractions are built on top of it.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Whenever we get an error updating the device stats item for a device in
btrfs_run_dev_stats() we allow the loop to go to the next device, and if
updating the stats item for the next device succeeds, we end up losing
the error we had from the previous device.
Fix this by breaking out of the loop once we get an error and make sure
it's returned to the caller. Since we are in the transaction commit path
(and in the critical section actually), returning the error will result
in a transaction abort.
Fixes: 733f4fbbc1 ("Btrfs: read device stats on mount, write modified ones during commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since commit 3d74a7556f ("btrfs: zlib: introduce zlib_compress_bio()
helper"), there are some reports about different crashes in zlib
compression path. One of the symptoms is list corruption like the
following:
list_del corruption. next->prev should be fffffbb340204a08, but was ffff8d6517cb7de0. (next=fffffbb3402d62c8)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:65!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 21436 Comm: kworker/u16:7 Not tainted 7.0.0-rc2-jcg+ #1 PREEMPT
Hardware name: LENOVO 10VGS02P00/3130, BIOS M1XKT57A 02/10/2022
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:__list_del_entry_valid_or_report+0xec/0xf0
Call Trace:
<TASK>
btrfs_alloc_compr_folio+0xae/0xc0 [btrfs]
zlib_compress_bio+0x39d/0x6a0 [btrfs]
btrfs_compress_bio+0x2e3/0x3d0 [btrfs]
compress_file_range+0x2b0/0x660 [btrfs]
btrfs_work_helper+0xdb/0x3e0 [btrfs]
process_one_work+0x192/0x3d0
worker_thread+0x19a/0x310
kthread+0xdf/0x120
ret_from_fork+0x22e/0x310
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Other symptoms include VM_BUG_ON() during folio_put() but it's rarer.
David Sterba firstly reported this during his CI runs but unfortunately
I'm unable to hit it.
Meanwhile zstd/lzo doesn't seem to have the same problem.
[CAUSE]
During zlib_compress_bio() every time the output buffer is full, we
queue the full folio into the compressed bio, and allocate a new folio
as the output folio.
After the input has finished, we loop through zlib_deflate() with
Z_FINISH to flush all output.
And when that is done, we still need to check if the last folio has any
content, and if so we still need to queue that part into the compressed
bio.
The problem is in the final folio handling, if the final folio is full
(for x86_64 the folio size is 4K), the length to queue is calculated by
u32 cur_len = offset_in_folio(out_folio, workspace->strm.total_out);
But since total_out is 4K aligned, the resulted @cur_len will be 0, then
we hit the bio_add_folio(), which has a quirk that if bio_add_folio()
got an length 0, it will still queue the folio into the bio, but return
false.
In that case we go to out: tag, which calls btrfs_free_compr_folio() to
release @out_folio, which may put the out folio into the btrfs global
pool list.
On the other hand, that @out_folio is already added to the
compressed bio, and will later be released again by
cleanup_compressed_bio(), which results double release.
And if this time we still need to put the folio into the btrfs global
pool list, it will result a list corruption because it's already in the
list.
[FIX]
Instead of offset_inside_folio(), directly use the difference between
strm.total_out and bi_size.
So that if the last folio is completely full, we can still properly
queue the full folio other than queueing zero byte.
Fixes: 3d74a7556f ("btrfs: zlib: introduce zlib_compress_bio() helper")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Reported-by: syzbot+3c4d8371d65230f852a2@syzkaller.appspotmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221176
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When create_space_info_sub_group() allocates elements of
space_info->sub_group[], kobject_init_and_add() is called for each
element via btrfs_sysfs_add_space_info_type(). However, when
check_removing_space_info() frees these elements, it does not call
btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is
not called and the associated kobj->name objects are leaked.
This memory leak is reproduced by running the blktests test case
zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak
feature reports the following error:
unreferenced object 0xffff888112877d40 (size 16):
comm "mount", pid 1244, jiffies 4294996972
hex dump (first 16 bytes):
64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc......
backtrace (crc 53ffde4d):
__kmalloc_node_track_caller_noprof+0x619/0x870
kstrdup+0x42/0xc0
kobject_set_name_vargs+0x44/0x110
kobject_init_and_add+0xcf/0x150
btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs]
create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs]
create_space_info+0x211/0x320 [btrfs]
btrfs_init_space_info+0x15a/0x1b0 [btrfs]
open_ctree+0x33c7/0x4a50 [btrfs]
btrfs_get_tree.cold+0x9f/0x1ee [btrfs]
vfs_get_tree+0x87/0x2f0
vfs_cmd_create+0xbd/0x280
__do_sys_fsconfig+0x3df/0x990
do_syscall_64+0x136/0x1540
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid the leak, call btrfs_sysfs_remove_space_info() instead of
kfree() for the elements.
Fixes: f92ee31e03 ("btrfs: introduce btrfs_space_info sub-group")
Link: https://lore.kernel.org/linux-block/b9488881-f18d-4f47-91a5-3c9bf63955a5@wdc.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/af8c15fa-4e41-4bb2-885c-0bc4e97532a6@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the superblock offset mismatch error message in
btrfs_validate_super(): we changed it so that it considers all the
superblocks, but the message still assumes we're only looking at the
first one.
The change from %u to %llu is because we're changing from a constant to
a u64.
Fixes: 069ec957c3 ("btrfs: Refactor btrfs_check_super_valid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The hardware teams noticed that the originally documented workaround
steps for Wa_16025250150 may not be sufficient to fully avoid a hardware
issue. The workaround documentation has been augmented to suggest
programming one additional register; make the corresponding change in
the driver.
Fixes: 7654d51f1f ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260319-wa_16025250150_part2-v1-1-46b1de1a31b2@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 470891606c)
Cc: stable@vger.kernel.org
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d82e0a72d9)
Cc: stable@vger.kernel.org
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a9003445 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 17f11bbbc7)
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52024a94e7)
Cc: stable@vger.kernel.org
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f1de51f49)
Cc: stable@vger.kernel.org
amdgpu_device_get_job_timeout_settings() passes a pointer directly
to the global amdgpu_lockup_timeout[] buffer into strsep().
strsep() destructively replaces delimiter characters with '\0'
in-place.
On multi-GPU systems, this function is called once per device.
When a multi-value setting like "0,0,0,-1" is used, the first
GPU's call transforms the global buffer into "0\00\00\0-1". The
second GPU then sees only "0" (terminated at the first '\0'),
parses a single value, hits the single-value fallthrough
(index == 1), and applies timeout=0 to all rings — causing
immediate false job timeouts.
Fix this by copying into a stack-local array before calling
strsep(), so the global module parameter buffer remains intact
across calls. The buffer is AMDGPU_MAX_TIMEOUT_PARAM_LENGTH
(256) bytes, which is safe for the stack.
v2: wrap commit message to 72 columns, add Assisted-by tag.
v3: use stack array with strscpy() instead of kstrdup()/kfree()
to avoid unnecessary heap allocation (Christian).
This patch was developed with assistance from Claude (claude-opus-4-6).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94d79f51ef)
Cc: stable@vger.kernel.org
Starting with commit 17ce8a6907 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5004
Fixes: 17ce8a6907 ("drm/amd/display: Add dsc pre-validation in atomic check")
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7c7121ae)
The connect_force_port test fails intermittently in CI because the
hardcoded server ports (60123/60124) may already be in use by other
tests or processes [1].
Fix this by passing port 0 to start_server(), letting the kernel assign
a free port dynamically. The actual assigned port is then propagated to
the BPF programs by writing it into the .bss map's initial value (via
bpf_map__initial_value()) before loading, so the BPF programs use the
correct backend port at runtime.
[1] https://github.com/kernel-patches/bpf/actions/runs/22697676317/job/65808536038
Suggested-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260323081131.65604-1-varunrmallya@gmail.com
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put.
Fixes: 8311ee2164 ("spi: meson-spicc: fix memory leak in meson_spicc_remove")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260322-rockchip-v1-1-fac3f0c6dad8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of a dynamic allocation, use stack variable and let the caller
pass the maximum ranges that can be held in the buffer.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the enum 'pixel_format' to 'dc_pixel_format' to avoid potential
name conflicts with the pixel_format struct defined in
include/video/pixel_format.h.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable user specified gfx clock ranges for smu_15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add node power management support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add baseboard temperature metrics support via system metrics table for
smu_v15_0_8
v4: Add separate function to fill baseboard temperature, use 16, remove
casting
v5: Optimize to use single switch case (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gpuboard temperature metrics support via system metrics table for
smu_v15_0_8
v3: Use per sensor attr id (Lijo)
v4: Use s16 for temp, remove cast, use separate function to fill
gpuboard temperature metrics data (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add read sensor support for smu_v15_0_8
v2: Remove gfx voltage support (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ppt1 support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add get_thermal_temperature_range support smu_v15_0_8
v2: Remove sriov check (Lijo)
v3: Restrict to 1VF mode(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add od_edit_dpm_table support for smu_v15_0_8
v2: Skip Gl2clk/Fclk (Lijo)
v3: sqaush in set_performance_support (Asad)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add populate_umd_state_clk support for smu 15.0.8
v2: remove gl2clk/socclk/fclk, restrict to only current min/max (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn42_init_hw() calls update_bw_bounding_box() when FAMS2 is disabled or
when the dchub reference clock changes. However the existing condition
mixes the callback pointer check with only one side of the || expression:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
This allows the block to be entered through the freq_changed path even
when update_bw_bounding_box() is NULL. The function is then called
unconditionally inside the block, which can lead to a NULL pointer
dereference.
Additionally, the code dereferences dc->clk_mgr->bw_params without
verifying that dc->clk_mgr and bw_params are valid.
Restructure the condition so that the update trigger remains the same
(FAMS2 disabled or dchub ref clock changed), but guard the call with
explicit checks for:
- update_bw_bounding_box callback
- dc->clk_mgr
- dc->clk_mgr->bw_params
Also introduce a helper boolean (dchub_ref_freq_changed) to improve
readability of the clock-change condition.
This fixes Smatch warnings about inconsistent NULL assumptions in
dcn42_init_hw().
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:264 dcn42_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 253)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:278 dcn42_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 274)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn32_init_hw() checks dc->clk_mgr before calling init_clocks(), so the
clock manager is not treated as unconditionally present on this path.
However, dcn32_initialize_min_clocks() later dereferences dc->clk_mgr,
bw_params, and clk_mgr callbacks without validating them.
Add the required guards in dcn32_initialize_min_clocks() before
accessing clk_mgr-dependent state, and check callback presence before
calling get_dispclk_from_dentist() and update_clocks().
Also guard the later update_bw_bounding_box() call in the FAMS2-disabled
path since it also dereferences dc->clk_mgr->bw_params.
This keeps clk_mgr handling consistent in the DCN32 HW init flow and
avoids possible NULL pointer dereferences reported by Smatch.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:1012 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 978)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add emit clock support and fetching other metrics data like temperature,
clock for smu_v15_0_8
v2: Use umc count for hbm stack temperature (Lijo)
v3: Use correct logic for hbm stacks (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .set_power_limit & .get_power_limit interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_unique_id interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_gpu_metrics interface for 15.0.8
v2: Remove members already exposed by other interfaces, use mask,
logical conversion (Lijo)
v3: Use correct logic for hbm stacks loop (Lijo)
Remove buffer allocation
v4: Make out of bound check outside loop (Lijo)
v5: fix locking in error case (Alex)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_pm_metrics interface for smu 15.0.8.
v2: Make tmo as unsigned (Lijo)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dpm table structs to use common definitions for smu_15_0
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup driver pptable and initialize data from static metrics table for
smu_v15_0_8
v2: Remove unrelated changes and update description (Lijo)
v3: Use ARRAY_SIZE (Lijo)
v4: Move structure to header file
v5: squash in static metrics support (Asad)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial mode2 support for smu_v15_0_8
v2: Move out non smu code, remove pci save/restore logic (Lijo)
v3: squash in updated msg (Alex)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu v15_0_8 is the new generation of smu ip block
v2: Squash in rebase changes (Alex)
v3: Squash in fw version check changes (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_userq_put/get are not needed in case we already holding
the userq_mutex and reference is valid already from queue create
time or from signal ioctl. These additional get/put could be a
potential reason for deadlock in case the ref count reaches zero
and destroy is called which again try to take the userq_mutex.
Due to the above change we avoid deadlock between suspend/restore
calling destroy queues trying to take userq_mutex again.
Cc: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add custom fclk setting support for smu_v13_x_x
v2: Move uclk fix to separate patch, return EOPNOTSUPP in case of dpm
disabled (Lijo)
v3: remove dpm check for filling fclk pstate table (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a9003445 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
