Factor out wrapper xfs_attr3_node_entry_remove function, which
exported for external use.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The assertion functions properly because we currently only truncate the
attr to a zero size. Any other new size of the attr is not preempted.
Make this assertion is specific to the datafork, preparing for
subsequent patches to truncate the attribute to a non-zero size.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Removing the plain array to track the UUIDs and switch
to xarray makes it more readable.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
[cem: remove unneeded return from xfs_uuid_unmount]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is a small risk that when fetching a NULL context image the
VF may get a tweaked context image prepared by another VF that was
previously running on the engine before the GuC scheduler switched
the VFs.
To avoid that risk, without forcing GuC scheduler to trigger costly
engine reset on every VF switch, use a watchdog mechanism that when
configured with impossible condition, triggers an interrupt, which
GuC will handle by doing an engine reset. Also adjust job size to
account for additional dwords with watchdog setup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260303201354.17948-4-michal.wajdeczko@intel.com
This command supports memory based Semaphore WAIT. Memory based
semaphores will be used for synchronization between the Producer
and the Consumer contexts. Producer and Consumer Contexts could
be running on different engines or on the same engine inside GT.
Bspec: 45749, 60244
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260303201354.17948-3-michal.wajdeczko@intel.com
The Watchdog Counter Control and Watchdog Counter Threshold
registers are needed for watchdog programming. This watchdog
will generate the "Media Hang Notify" interrupt.
Bspec: 45999, 46000
Bspec: 60373, 60374
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260303201354.17948-2-michal.wajdeczko@intel.com
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the System76 ACPI driver to a platform one.
After this change, the subordinate hwmon, input and LED class devices
will be registered under the platform device used for driver binding
instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3401648.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13970743.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Drop two redundant devm_led_classdev_unregister() calls from
system76_remove().
No intentional functional impact.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5057164.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Panasonic laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
To maintain backwards compatibility with possibly existing user space,
the sysfs attributes created by the driver under the ACPI device object
used by it are not relocated. Accordingly, the driver will continue to
use the driver_data pointer in struct acpi_device which needs to be
cleared on driver removal.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8664183.T7Z3S40VBb@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13979037.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device pointer cannot be NULL in acpi_pcc_hotkey_add() and
acpi_pcc_hotkey_remove() because these functions are ACPI driver
callbacks and NULL is never passed to any of them as an argument.
Likewise, acpi_pcc_hotkey_resume() is a resume callback of a
device driver and NULL is never passed to it as an argument, so
the dev pointer in it cannot be NULL.
Moreover, since acpi_pcc_hotkey_remove() and acpi_pcc_hotkey_resume()
can only run after acpi_pcc_hotkey_add() has completed successfully,
the acpi_driver_data() of the device object used by them cannot be
NULL when they run.
Drop all of the redundant NULL checks of the pointers mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1957824.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An ACPI notify handler is leaked if device_create_file() returns an
error in acpi_pcc_hotkey_add().
Also, it is pointless to call pcc_unregister_optd_notifier() in
acpi_pcc_hotkey_remove() if pcc->platform is NULL and it is better
to arrange the cleanup code in that function in the same order as
the rollback code in acpi_pcc_hotkey_add().
Address the above by placing the pcc_register_optd_notifier() call in
acpi_pcc_hotkey_add() after the device_create_file() return value
check and placing the pcc_unregister_optd_notifier() call in
acpi_pcc_hotkey_remove() right before the device_remove_file() call.
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2411055.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert pcc_register_optd_notifier() whose return value is never used to
a void function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5093613.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The maximum power value may exist in either the data or backoff field.
Previously, backoff power limits were not considered in txpower reporting.
This patch ensures mt76 also considers backoff values in the SKU table.
Also, each RU entry (RU26, RU52, RU106, BW20, ...) in the DTS corresponds
to 10 stream combinations (1T1ss, 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss,
4T2ss, 3T3ss, 4T3ss, 4T4ss).
For beamforming tables:
- In connac2, beamforming entries for BW20~BW160, and OFDM do not include
1T1ss.
- In connac3, beamforming entries for BW20~BW160, and RU include 1T1ss,
but OFDM beamforming does not include 1T1ss.
Non-beamforming and RU entries for both connac2 and connac3 include 1T1ss.
Fixes: b05ab4be9f ("wifi: mt76: mt7915: add bf backoff limit table support")
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/8fa8ec500b3d4de7b1966c6887f1dfbe5c46a54c.1771205424.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue.
Fixes: a8f424c128 ("wifi: mt76: add multi-radio remain_on_channel functions")
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/ace737e7b621af7c2adb33b0188011a5c1de2166.1765204256.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260126180013.8167-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7921_set_roc API may be executed concurrently with mt7921_roc_work,
specifically between the following code paths:
- The check and clear of MT76_STATE_ROC in mt7921_roc_work:
if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state))
return;
- The execution of ieee80211_iterate_active_interfaces.
This race condition can interrupt the ROC abort flow, resulting in
the ROC process failing to abort as expected.
To address this defect, the modification of MT76_STATE_ROC is now
protected by mt792x_mutex_acquire(phy->dev). This ensures that
changes to the ROC state are properly synchronized, preventing
race conditions and ensuring the ROC abort flow is not interrupted.
Fixes: 034ae28b56 ("wifi: mt76: mt7921: introduce remain_on_channel support")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After the chip reset, the procedure to set the tx power will not be
successful because the previous region setting is still remains.
Clear the region setting during MAC initialization and allow it to be
reset to finalize the TX power setting.
Fixes: 3bc62aa448 ("wifi: mt76: mt7925: add auto regdomain switch support")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Link: https://patch.msgid.link/20260120163152.3694116-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: d1369e515e ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Fixes: 6683d98808 ("mt76: connac: move mt76_connac_mcu_add_key in connac module")
Fixes: 4f831d18d1 ("wifi: mt76: mt7915: enable WED RX support")
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260116144919.1482558-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20251216013849.17976-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
We are experiencing command timeouts because an upper layer triggers
an unexpected scan while the system/device is in suspend.
The upper layer should not initiate scans until the NIC has fully resumed.
We want to prevent scans during suspend and avoid timeouts without harming
power management or user experience.
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20260112114007.2115873-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad95 ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20251216022017.23870-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to not always reallocate them during NPU reset, store the DMA
mapped buffer addresses allocated by mt7996_npu_hw_init routine in
mt7996 structure.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-16-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not run reset_q callaback with reset_idx set to true for NPU Tx
queues. This is a preliminary patch to properly manage reset procedure
when NPU offloading is enabled.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-14-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to properly enable NPU offloading for MT7996
chipset since NPU initialization must be completed before kicking rx
queues.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-13-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce __mt7996_npu_hw_init utility routine in order to run it
holding mt76 mutex and move NPU hw re-initialization before restarting
the NAPIs during device reset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-12-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 dma codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-11-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 init codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-10-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in RRO 3.0 session management.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-9-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7992_npu_txrx_offload_init utility routine.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-6-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix BAND2 tx queues initialization for MT7990 chipset when NPU is
enabled. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-4-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7990 NPU binary requires to initialize NPU desc_base after configuring
ring_size. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-3-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2a ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-1-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues.
Fixes: 950d0abb5c ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251208-mt76-fix-memory-leak-v1-1-cba813fc62b8@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure.
Cc: stable@vger.kernel.org
Fixes: fa6ad88e02 ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251009020158.1923429-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior.
Fixes: 5c14a5f944 ("mt76: mt7921: introduce mt7921e support")
Signed-off-by: Rory Little <rory@candelatech.com>
Link: https://patch.msgid.link/20250904000711.3033860-1-rory@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7996 driver currently checks the MT_RXD3_NORMAL_FCS_ERR bit in
rxd1 whereas other Connac3-based drivers(mt7925) correctly check this
bit in rxd3.
Since the MT_RXD3_NORMAL_FCS_ERR bit is defined in the fourth RX
descriptor word (rxd3), update mt7996 to use the proper descriptor
field. This change aligns mt7996 with mt7925 and the rest of the
Connac3 family.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251013090826.753992-1-alok.a.tiwari@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the check_undefined command in kernel/trace/Makefile fails, there
is no output, making it hard to understand why the build failed. Capture
the output of the $(NM) + grep command and print it when failing to make
it clearer what the problem is.
Fixes: a717943d8e ("tracing: Check for undefined symbols in simple_ring_buffer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260320-cmd_check_undefined-verbose-v1-1-54fc5b061f94@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
