The switch to cpumask_nth() over cpumask_weight(), as it may return
earlier - as soon as the function counts the required number of CPUs.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314192544.605914-1-ynorov@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
STORE_FAILURES was only saved from fail(), so paths that reached dodie()
could exit without preserving failure logs.
That includes fatal hook paths such as:
POST_BUILD_DIE = 1
and ordinary failures when:
DIE_ON_FAILURE = 1
Call save_logs("fail", ...) from dodie() too so fatal failures keep the
same STORE_FAILURES artifacts as non-fatal fail() paths.
Cc: John Hawley <warthog9@eaglescrag.net>
Link: https://patch.msgid.link/20260318-ktest-fixes-v1-1-9dd94d46d84c@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The execution of $(call cmd,makefile) will print 'GEN Makefile' on each
build, even if the Makefile is not effectively changed.
Use a filechk command instead, so a message is only printed on changes.
The Makefile is now created even if the build is aborted due to an
unclean working tree. That should not make a difference in practice.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260305-kbuild-makefile-spam-v1-1-910f6cf218a1@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Commands that add counters, such as 'turbostat --show C1,C1+'
display merged columns without a delimiter.
This is caused by the bad syntax: '(*printed++ ? delim : "")', shared by
print_name()/print_hex_value()/print_decimal_value()/print_float_value()
Use '((*printed)++ ? delim : "")' to correctly increment the value at *printed.
[lenb: fix code and commit message typo, re-word]
Fixes: 56dbb87850 ("tools/power turbostat: Refactor added column header printing")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
strlcpy() and strlcat() are confusing APIs and the former one already
gone from the kernel.
In preparation to kill strlcat() replace it with the better alternative.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260317080218.1814693-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to RISC-V psABI specification, the PLT (Program Linkage Table)
has the following layout:
- The first PLT entry occupies two 16-byte entries (32 bytes total)
- Subsequent PLT entries take up 16 bytes each
This aligns with the binutils-gdb implementation which defines the same
PLT sizes for RISC-V architecture.
Update get_plt_sizes() to set plt_header_size=32 and plt_entry_size=16
for EM_RISCV, matching the architecture's standard ABI.
Since AARCH64, LOONGARCH, and RISCV have the same PLT size definition,
they are merged together.
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=bfd/elfnn-riscv.c
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove duplicate inclusion of stat.h in intel-tpebs.c to clean up
redundant code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove duplicate inclusion of debug.h in symbol.c to clean up redundant
code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Building perf with CORESIGHT=1 and the optional CSTRACE_RAW=1 enables
additional debug printing of raw trace data when using command:-
perf report --dump.
This raw trace prints the CoreSight formatted trace frames, which may be
used to investigate suspected issues with trace quality / corruption /
decode.
These frames are not present in ETE + TRBE trace.
This fix removes the unnecessary call to print these frames.
This fix also rationalises implementation - original code had helper
function that unnecessarily repeated initialisation calls that had
already been made.
Due to an addtional fault with the OpenCSD library, this call when ETE/TRBE
are being decoded will cause a segfault in perf. This fix also prevents
that problem for perf using older (<= 1.8.0 version) OpenCSD libraries.
Fixes: 68ffe39028 ("perf tools: Add decoder mechanic to support dumping trace data")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up some extra files that need to be sync'ed with the kernel
sources to try and reduce the number of PRs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The command "dmsetup remove_all" may take a long time (a minute for
removing 1000 devices), so make it interruptible with fatal signals.
For better readability, the bool arguments were changed to flags.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic().
Cc: stable@vger.kernel.org
Fixes: 670c672608 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The A733 PCK600, similar to A523 PCK600, is likely a customized version
of ARM PCK-600 power controller. They share the same BSP drivers in the
package provided by Radxa, with the only difference being the lack of
resets.
Therefore, document A733 compatible and make resets required only for
the other models, as well as prepare the PD definitions for future
device trees.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document the dmas property to state it must be specified as TX/RX DMA
specifier pairs.
This clarifies the expected ordering and improves binding readability
without changing behavior.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/ea6ed3b82c5a326732adfc0fcdb2922bfcad2591.1771344527.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the generic pwrctrl driver to control power of PCIe
UPD720201/UPD720202 USB 3.0 xHCI Host Controller.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-4-1ad79caa1efa@linaro.org
dev_err_probe() returns the error code passed to it, so this:
dev_err_probe(dev, ret, "Failed to get slot regulators\n");
return ret;
is equivalent to this:
return dev_err_probe(dev, ret, "Failed to get slot regulators\n");
Simplify by using the latter.
Suggested-by: Bartosz Golaszewski <brgl@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-2-1ad79caa1efa@linaro.org
The driver is pretty generic and would fit for either PCI Slots or
endpoints connected to PCI ports, so rename the driver and module as
pci-pwrctrl-generic.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-3-1ad79caa1efa@linaro.org
Timings of the nand are adjusted by pl35x_nfc_setup_interface() but
actually applied by the pl35x_nand_select_target() function.
If there is only one nand chip, the pl35x_nand_select_target() will only
apply the timings once since the test at its beginning will always be true
after the first call to this function. As a result, the hardware will
keep using the default timings set at boot to detect the nand chip, not
the optimal ones.
With this patch, we program directly the new timings when
pl35x_nfc_setup_interface() is called.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This helper really is just a little helper for internal purposes, and is
I/O operation oriented, despite its name. It has already been misused
in commit 5008c3ec3f ("mtd: spi-nor: core: Check read CR support"), so
rename it to clarify its purpose: it is only useful for reads and page
programs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Commit 5008c3ec3f ("mtd: spi-nor: core: Check read CR support") adds a
controller check to make sure the core will not use CR reads on
controllers not supporting them. The approach is valid but the fix is
incorrect. Unfortunately, the author could not catch it, because the
expected behavior was met. The patch indeed drops the RDCR capability,
but it does it for all controllers!
The issue comes from the use of spi_nor_spimem_check_op() which is an
internal helper dedicated to check read/write operations only, despite
its generic name.
This helper looks for the biggest number of address bytes that can be
used for a page operation and tries 4 then 3. It then calls the usual
spi-mem helpers to do the checks. These will always fail because there
is now an inconsistency: the address cycles are forced to 4 (then 3)
bytes, but the bus width during the address cycles rightfully remains
0. There is a non-zero address length but a zero address bus width,
which is an invalid combination.
The correct check in this case is to directly call spi_mem_supports_op()
which doesn't messes up with the operation content.
Fixes: 5008c3ec3f ("mtd: spi-nor: core: Check read CR support")
Cc: stable@vger.kernel.org
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Current i10nm_edac only supports the firmware decoder (ACPI DSM methods)
for Granite Rapids servers. Add the driver decoder, which directly extracts
topology information from the IMC machine check bank IA32_MCi_MISC MSRs, to
improve decoding performance for Granite Rapids.
[Tony: Updated commit comment]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Shawn Fan <shawn.fan@intel.com>
Link: https://patch.msgid.link/20260318023118.2704139-1-qiuxu.zhuo@intel.com
The bio completion path in the process context (e.g. dm-verity)
will directly call into decompression rather than trigger another
workqueue context for minimal scheduling latencies, which can
then call vm_map_ram() with GFP_KERNEL.
Due to insufficient memory, vm_map_ram() may generate memory
swapping I/O, which can cause submit_bio_wait to deadlock
in some scenarios.
Trimmed down the call stack, as follows:
f2fs_submit_read_io
submit_bio //bio_list is initialized.
mmc_blk_mq_recovery
z_erofs_endio
vm_map_ram
__pte_alloc_kernel
__alloc_pages_direct_reclaim
shrink_folio_list
__swap_writepage
submit_bio_wait //bio_list is non-NULL, hang!!!
Use memalloc_noio_{save,restore}() to wrap up this path.
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The current error handling has two issues:
First, pin_user_pages_fast() can return a short pin count (less than
requested but greater than zero) when it cannot pin all requested pages.
This is treated as success, leading to partially pinned regions being
used, which causes memory corruption.
Second, when an error occurs mid-loop, already pinned pages from the
current batch are not properly accounted for before calling
mshv_region_invalidate_pages(), causing a page reference leak.
Treat short pins as errors and fix partial batch accounting before
cleanup.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
get_alias_quirk() resolves a quirk for an aliased USB ID by scanning
usb_audio_ids[], but it currently checks only the vendor/product pair.
This is weak for quirk table entries that also depend on additional
USB_DEVICE_ID match fields, such as device or interface class,
subclass, protocol, interface number, or bcdDevice range.
Keep the aliased vid:pid as the lookup key, then validate only the
remaining match criteria of each candidate entry against the real
device/interface descriptors by clearing USB_DEVICE_ID_MATCH_DEVICE
from a temporary copy and passing it to usb_match_one_id().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260318-alsa-usb-fix-quirk-alias-v3-1-bd3b17a32939@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang-22 rightfully warns that the memcpy() in adapter_prepare() copies
between different structures, crossing the boundary of nested
structures inside it:
In file included from sound/pci/asihpi/hpimsgx.c:13:
In file included from include/linux/string.h:386:
include/linux/fortify-string.h:569:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
569 | __write_overflow_field(p_size_field, size);
The two structures seem to refer to the same layout, despite the
separate definitions, so the code is in fact correct.
Avoid the warning by copying the two inner structures separately.
I see the same pattern happens in other functions in the same file,
so there is a chance that this may come back in the future, but
this instance is the only one that I saw in practice, hitting it
multiple times per day in randconfig build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260318124016.3488566-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing blank lines after variable declarations in several files
throughout the rtl8723bs driver to comply with kernel coding style.
Signed-off-by: Oskar Ray-Frayssinet <rayfraytech@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260314122325.7877-1-rayfraytech@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Break a long function call across two lines in order to make code
easier to read and also comply with the Linux coding style.
Problem was found using checkpatch.pl tool.
Signed-off-by: Andrea Poldi <andrea@riposetti.com>
Link: https://patch.msgid.link/20260317165845.12594-1-andrea@riposetti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Combine the return value checks for _FAIL and RTW_RX_HANDLED into a
single logical OR statement and remove unnecessary braces. This improves
code readability and resolves the following checkpatch.pl warning:
"WARNING: braces {} are not necessary for any arm of this statement"
Signed-off-by: Giacomo Di Clerico <giacomodiclerico@gmail.com>
Link: https://patch.msgid.link/20260317100723.72476-1-giacomodiclerico@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace msleep(10) with fsleep(10 * USEC_PER_MSEC)
in _rtw_init_xmit_priv().
fsleep() is the new standard API for delays, as it automatically chooses
the best sleep method based on the duration.
Suggested-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Marcos Andrade <marcosandrade95963@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260316221924.4904-3-marcosandrade95963@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace hardcoded magic numbers for network protocols (e.g., 0x0806
for ARP, 0x888e for EAPOL) with their standard EtherType macro
equivalents (ETH_P_ARP, ETH_P_PAE) defined in <linux/if_ether.h>.
This change improves code readability and aligns the driver with
standard Linux networking definitions.
Signed-off-by: Marcos Andrade <marcosandrade95963@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260316221924.4904-2-marcosandrade95963@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eqNByte() function is a redundant reimplementation of strcmp().
Remove eqNByte() and switch its usages to strcmp().
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bera Yüzlü <b9788213@gmail.com>
Link: https://patch.msgid.link/20260309184556.846-2-b9788213@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove several global efuse variables from rtw_efuse.c and their
corresponding extern declarations in rtw_efuse.h.
These variables (fakeEfuseBank, BTEfuseUsedBytes, etc.) are completely
unused legacy code. The driver currently maintains the efuse state
properly within the 'efuse_hal' structure, which is encapsulated
inside 'hal_com_data'.
The removal of this dead code cleans up the global namespace and
resolves multiple checkpatch.pl warnings regarding CamelCase naming
conventions. Verified by compilation that no functional code references
these variables.
Signed-off-by: Marcos Andrade <marcosandrade95963@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260316220435.2249-1-marcosandrade95963@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the 'NDIS_802_11_MAC_ADDRESS' type and replace all variables of
this type with an array of 'u8', which will make the code more
understandable and get rid of unnecessary 'typedef'.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260316113427.3696-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ETH_ALEN macro is already declared in the Kernel headers, so there
is no need to redefine it here.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260315131734.25054-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gb_dev_loopback_ro_attr macro accepted a 'conn' argument which
was never used in its expansion. Remove it from both the macro
definition and its invocation.
Signed-off-by: Giacomo Di Clerico <giacomodiclerico@gmail.com>
Link: https://patch.msgid.link/20260315105853.34609-1-giacomodiclerico@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a space in the line start to follow kernel coding style.
Reported by checkpatch.pl.
Signed-off-by: Bera Yüzlü <b9788213@gmail.com>
Reviewed-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260310125556.874-2-b9788213@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the kernel's documentation, sysfs_emit() is the preferred way
to format strings for sysfs attributes. It handles buffer overruns
safely. Replace sprintf calls with sysfs_emit across all loopback
sysfs show macros.
Signed-off-by: Luis Soza Rodriguez <contact@sluisr.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260309230507.4931-1-contact@sluisr.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An unreachable default case calls BUG(). Remove the entire default case,
as the three possible cases are already addressed.
Signed-off-by: Mark Adamenko <marusik.adamenko@gmail.com>
Link: https://patch.msgid.link/20260310014514.40293-1-marusik.adamenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_linked_check() always return 'bool' value, but it's type
'int'. Replace 'int' with 'bool' to make it more accurate.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260309201257.16984-5-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_is_desired_network() used only in rtw_mlme.c file and
always return 'true' or 'false', so it's type can be replaced
with 'static bool'.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260309201257.16984-4-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_is_same_ibss() returns a 'bool' value, but has an 'int
type. Replace 'int' -> 'bool' types to make it more accrurate.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260309201257.16984-3-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_if_up() actually return 'bool' value, but it's type is
'signed int'. Replace 'signed int' with 'bool' to make it more accurate.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260309201257.16984-2-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tip tree handbook is a pretty handy reference for keeping the
various tip maintainers happy. But there are no references to it
in the MAINTAINERS file.
Add a references to the handbook for a number of subsystems. I've
added these for all of the obvious subsystems that list T:.../tip.git
and are likely to follow the tip rules.
This will be useful both for humans digging in the MAINTAINERS file
and our new AI bot overlords.
I'm cc'ing all the M:'s and L:'s listed for the subsystems but leaving
off the R:'s because the cc list is already out of control. I'll
commit this to *some* tip branch if there's general consensus that
this is a good idea.
[ dhansen: add objtool and futexes at peterz's urging ]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Boqun Feng <boqun@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260305212215.3188399-1-dave.hansen@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
