Remove a NOP wait_event() in irdma_modify_qp_roce() which is relevant
for iWARP and likely a copy and paste artifact for RoCEv2. The wait event
is for sending a reset on a TCP connection, after the reset has been
requested in irdma_modify_qp(), which occurs only in iWarp mode.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In irdma_modify_qp() update ibqp state to error if the irdma QP is already
in error state, otherwise the ibqp state which is visible to the consumer
app remains stale.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix a typo inside a comment message from ("generata" -> "generate")
in function do_gmbus_xfer() before calling intel_de_write_fw()
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-3-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When reading exactly 512 bytes with burst read enabled, the
extra_byte_added path breaks out of the inner do-while without
decrementing len. The outer while(len) then re-enters and gmbus_wait()
times out since all data has been delivered. Decrement len before the
break so the outer loop terminates correctly.
Fixes: d5dc0f43f2 ("drm/i915/gmbus: Enable burst read")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-2-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Rockchip VOP2 display controller allows configuring the background
color of each video output port.
Since a previous patch introduced the BACKGROUND_COLOR CRTC property,
which defaults to solid black, make use of it when programming the
hardware.
Note the maximum precision allowed by the display controller is 10bpc,
while the alpha component is not supported, hence ignored.
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-4-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the BACKGROUND_COLOR CRTC property when filling the
background during blending. It already defaults to solid black.
Since the internal representation of the pixel color in VKMS relies on
16 bits of precision, use the newly introduced DRM_ARGB64_GET{R|G|B}()
helpers to access the individual components of the background color
property, which is compliant with DRM_FORMAT_ARGB16161616.
It's worth noting the alpha component is ignored, hence non-opaque
background colors are not supported.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-3-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently DIV_ROUND_CLOSEST() is only available for the kernel via
include/linux/math.h.
Expose it to userland as well by adding __KERNEL_DIV_ROUND_CLOSEST() as
a common definition in uapi.
Additionally, ensure it allows building ISO C applications by switching
from the 'typeof' GNU extension to the ISO-friendly __typeof__.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-1-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The symlink name was previously duplicated using an explicit kmalloc()
followed by strcpy(), which is deprecated [1]. Replace this open-coded
string duplication with kstrdup(), which allocates and copies the
symlink name with a single helper function.
Remove the local variable 'size' and set 'i_size' directly using
strlen(cp), which is equivalent to the previous value of 'size'.
This simplifies the code, uses common string-handling helpers, and
removes the deprecated use of strcpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260318001219.2354-3-thorsten.blum@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit aa35dd5cbc ("iomap: fix invalid folio access after
folio_end_read()") partially addressed invalid folio access for folios
without an ifs attached, but it did not handle the case where
1 << inode->i_blkbits matches the folio size but is different from the
granularity used for the IO, which means IO can be submitted for less
than the full folio for the !ifs case.
In this case, the condition:
if (*bytes_submitted == folio_len)
ctx->cur_folio = NULL;
in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and
iomap_read_end() will still be called on the folio even though the IO
helper owns it and will finish the read on it.
Fix this by unconditionally invalidating ctx->cur_folio for the !ifs
case.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/linux-fsdevel/b3dfe271-4e3d-4922-b618-e73731242bca@wdc.com/
Fixes: b2f35ac414 ("iomap: add caller-provided callbacks for read and readahead")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260317203935.830549-1-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
AMD MDB IP supports Linked List (LL) mode as well as non-LL mode.
The current code does not have the mechanisms to enable the
DMA transactions using the non-LL mode. The following two cases
are added with this patch:
- For the AMD (Xilinx) only, when a valid physical base address of
the device side DDR is not configured, then the IP can still be
used in non-LL mode. For all the channels DMA transactions will
be using the non-LL mode only. This, the default non-LL mode,
is not applicable for Synopsys IP with the current code addition.
- If the default mode is LL-mode, for both AMD (Xilinx) and Synosys,
and if user wants to use non-LL mode then user can do so via
configuring the peripheral_config param of dma_slave_config.
Signed-off-by: Devendra K Verma <devendra.verma@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260318070403.1634706-3-devendra.verma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AMD MDB PCIe endpoint support. For AMD specific support
added the following
- AMD supported PCIe Device IDs and Vendor ID (Xilinx).
- AMD MDB specific driver data
- AMD MDB specific VSEC capability to retrieve the device DDR
base address.
Signed-off-by: Devendra K Verma <devendra.verma@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260318070403.1634706-2-devendra.verma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are a couple of spelling mistakes, one in a comment block and
one in a module description. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260317204631.120332-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If zonegc_low_space is set to zero (which is the default), the second
condition in xfs_zoned_need_gc() that triggers GC never evaluates to
true because the calculated threshold will always be 0. So there is no
need to calculate the threshold and to evaluate that condition. Return
early when zonegc_low_space is zero.
While at it, add comments to document the intent of each of the 3 tests
used to determine the return value to control the execution of garbage
collection.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Modify xfs_zoned_show_stats() to add to the information displayed with
/proc/self/mountstats the total number of zones (RT groups) and the
number of open zones together with the maximum number of open zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Fix a typo in the comment describing the second call to
xfs_select_open_zone_lru() in xfs_select_zone_nowait().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When xfs_select_zone_nowait() is called with pack_tight equal to true,
the function xfs_select_open_zone_mru() is called if no open zone is
returned by xfs_select_open_zone_lru(), that is, when oz is NULL. The
open zone pointer return of xfs_select_zone_nowait() is then checked,
but this check is outside of the "if (pack_tight)" that trigered the
call to xfs_select_open_zone_mru(). In other word, this check is
unnecessarily done even when pack_tight is false.
Move the check for the return value of the call to
xfs_select_open_zone_mru() inside the if that controls the call to this
function, so that we do not uselessly test again the value of oz when
pack_tight is false.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Microchip is the only platform that doesn't have a top-level switch for
disabling all SoC families. Align it with other platforms and update the
arm64 defconfig to keep the default config the same.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260226143615.65788-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the `__counted_by_ptr` attribute to the `buffer` field of `struct
xfs_attr_list_context`. This field is used to point to a buffer of
size `bufsize`.
The `buffer` field is assigned in:
1. `xfs_ioc_attr_list` in `fs/xfs/xfs_handle.c`
2. `xfs_xattr_list` in `fs/xfs/xfs_xattr.c`
3. `xfs_getparents` in `fs/xfs/xfs_handle.c` (implicitly initialized to NULL)
In `xfs_ioc_attr_list`, `buffer` was assigned before `bufsize`. Reorder
them to ensure `bufsize` is set before `buffer` is assigned, although
no access happens between them.
In `xfs_xattr_list`, `buffer` was assigned before `bufsize`. Reorder
them to ensure `bufsize` is set before `buffer` is assigned.
In `xfs_getparents`, `buffer` is NULL (from zero initialization) and
remains NULL. `bufsize` is set to a non-zero value, but since `buffer`
is NULL, no access occurs.
In all cases, the pointer `buffer` is not accessed before `bufsize` is set.
This patch was generated by CodeMender and reviewed by Bill Wendling.
Tested by running xfstests.
Signed-off-by: Bill Wendling <morbo@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The newly added XFS_IOC_VERIFY_MEDIA is a bit unusual in how it handles
buftarg fields. Update it to be more in line with other XFS code:
- use btp->bt_dev instead of btp->bt_bdev->bd_dev to retrieve the device
number for tracing
- use btp->bt_logical_sectorsize instead of
bdev_logical_block_size(btp->bt_bdev) to retrieve the logical sector
size
- compare the buftarg and not the bdev to see if there is a separate
log buftarg
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return.
Signed-off-by: hongao <hongao@uniontech.com>
Fixes: 7d1f0e167a ("xfs: check the ondisk space mapping behind a dquot")
Cc: <stable@vger.kernel.org> # v6.8
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Factor the loop body of xfsaild_push() into a separate
xfsaild_process_logitem() helper to improve readability.
This is a pure code movement with no functional change.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock
is dropped to perform buffer IO. Once the cluster buffer no longer
protects the log item from reclaim, the log item may be freed by
background reclaim or the dquot shrinker. The subsequent spin_lock()
call dereferences lip->li_ailp, which is a use-after-free.
Fix this by saving the ailp pointer in a local variable while the AIL
lock is held and the log item is guaranteed to be valid.
Reported-by: syzbot+652af2b3c5569c4ab63c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=652af2b3c5569c4ab63c
Fixes: 90c60e1640 ("xfs: xfs_iflush() is no longer necessary")
Cc: stable@vger.kernel.org # v5.9
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer.
Reported-by: syzbot+652af2b3c5569c4ab63c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=652af2b3c5569c4ab63c
Fixes: 90c60e1640 ("xfs: xfs_iflush() is no longer necessary")
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable.
Reported-by: syzbot+652af2b3c5569c4ab63c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=652af2b3c5569c4ab63c
Fixes: 90c60e1640 ("xfs: xfs_iflush() is no longer necessary")
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Reorder the ORC register values so their ordering matches the x86
instruction set register encodings.
No functional change intended.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
We only have a single caller, no need to keep it in its own function.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
[hch: add zone_record_blocks trace back]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the "sd_llc" passed to select_idle_cpu() to obtain the
"sd_llc_shared" instead of dereferencing the per-CPU variable.
Since "sd->shared" is always reclaimed at the same time as "sd" via
call_rcu() and update_top_cache_domain() always ensures a valid
"sd->shared" assignment when "sd_llc" is present, "sd_llc->shared" can
always be dereferenced without needing an additional check.
While at it move the cpumask_and() operation after the SIS_UTIL bailout
check to avoid unnecessarily computing the cpumask.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-10-kprateek.nayak@amd.com
Only the topmost SD_SHARE_LLC domain has the "sd->shared" assigned.
Simply use "sd->shared" as an indicator for load balancing at the highest
SD_SHARE_LLC domain in update_idle_cpu_scan() instead of relying on
llc_size.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-9-kprateek.nayak@amd.com
select_task_rq_fair() is always called with p->pi_lock held and IRQs
disabled which makes it equivalent of an RCU read-side.
Since commit 71fedc41c2 ("sched/fair: Switch to
rcu_dereference_all()") switched to using rcu_dereference_all() in the
wakeup path, drop the explicit rcu_read_{lock,unlock}() in the fair
task's wakeup path.
Future plans to reuse select_task_rq_fair() /
find_energy_efficient_cpu() in the fair class' balance callback will do
so with IRQs disabled and will comply with the requirements of
rcu_dereference_all() which makes this safe keeping in mind future
development plans too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-8-kprateek.nayak@amd.com
em_cpu_energy() is part of the EAS (Fair) task wakeup path. Now that
rcu_read_{,un}lock() have been removed from find_energy_efficient_cpu()
switch to rcu_dereference_all() and check for rcu_read_lock_any_held()
in em_cpu_energy() as well.
In EAS (Fair) task wakeup path is a preempt/IRQ disabled region, so
rcu_read_{,un}lock() can be removed.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/5b1228b7-5949-4a45-9f62-e8ce936de694@arm.com
Similar to commit 71fedc41c2 ("sched/fair: Switch to
rcu_dereference_all()"), switch to checking for rcu_read_lock_any_held()
in idle_get_state() to allow removing superfluous rcu_read_lock()
regions in the fair task's wakeup path where the pi_lock is held and
IRQs are disabled.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-7-kprateek.nayak@amd.com
Now that "sd->shared" assignments are using the sched_domain_shared
objects allocated with s_data, remove the sd_data based allocations.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-6-kprateek.nayak@amd.com
Use the "sched_domain_shared" object allocated in s_data for
"sd->shared" assignments. Assign "sd->shared" for the topmost
SD_SHARE_LLC domain before degeneration and rely on the degeneration
path to correctly pass down the shared object to "sd_llc".
sd_degenerate_parent() ensures degenerating domains must have the same
sched_domain_span() which ensures 1:1 passing down of the shared object.
If the topmost SD_SHARE_LLC domain degenerates, the shared object is
freed from destroy_sched_domain() when the last reference is dropped.
claim_allocations() NULLs out the objects that have been assigned as
"sd->shared" and the unassigned ones are freed from the __sds_free()
path.
To keep all the claim_allocations() bits in one place,
claim_allocations() has been extended to accept "s_data" and iterate the
domains internally to free both "sched_domain_shared" and the
per-topology-level data for the particular CPU in one place.
Post cpu_attach_domain(), all reclaims of "sd->shared" are handled via
call_rcu() on the sched_domain object via destroy_sched_domains_rcu().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-5-kprateek.nayak@amd.com
The "sched_domain_shared" object is allocated for every topology level
in __sdt_alloc() and is freed post sched domain rebuild if they aren't
assigned during sd_init().
"sd->shared" is only assigned for SD_SHARE_LLC domains and out of all
the assigned objects, only "sd_llc_shared" is ever used by the
scheduler.
Since only "sd_llc_shared" is ever used, and since SD_SHARE_LLC domains
never overlap, allocate only a single range of per-CPU
"sched_domain_shared" object with s_data instead of doing it per
topology level.
The subsequent commit uses the degeneration path to correctly assign the
"sd->shared" to the topmost SD_SHARE_LLC domain.
No functional changes are expected at this point.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-4-kprateek.nayak@amd.com
Subsequent changes to assign "sd->shared" from "s_data" would
necessitate finding the topmost SD_SHARE_LLC to assign shared object to.
This is very similar to the "imb_numa_nr" computation loop except that
"imb_numa_nr" cares about the first domain without the SD_SHARE_LLC flag
(immediate parent of sd_llc) whereas the "sd->shared" assignment would
require sd_llc itself.
Extract the "imb_numa_nr" calculation into a helper
adjust_numa_imbalance() and use the current loop in the
build_sched_domains() to find the sd_llc.
While at it, guard the call behind CONFIG_NUMA's status since
"imb_numa_nr" only makes sense on NUMA enabled configs with SD_NUMA
domains.
No functional changes intended.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-3-kprateek.nayak@amd.com
The "sd_weight" used for calculating the load balancing interval, and
its limits, considers the span weight of the entire topology level
without accounting for cpuset partitions.
For example, consider a large system of 128CPUs divided into 8 * 16CPUs
partition which is typical when deploying virtual machines:
[ PKG Domain: 128CPUs ]
[Partition0: 16CPUs][Partition1: 16CPUs] ... [Partition7: 16CPUs]
Although each partition only contains 16CPUs, the load balancing
interval is set to a minimum of 128 jiffies considering the span of the
entire domain with 128CPUs which can lead to longer imbalances within
the partition although balancing within is cheaper with 16CPUs.
Compute the "sd_weight" after computing the "sd_span" considering the
cpu_map covered by the partition, and set the load balancing interval,
and its limits accordingly.
For the above example, the balancing intervals for the partitions PKG
domain changes as follows:
before after
balance_interval 128 16
min_interval 128 16
max_interval 256 32
Intervals are now proportional to the CPUs in the partitioned domain as
was intended by the original formula.
Fixes: cb83b629ba ("sched/numa: Rewrite the CONFIG_NUMA sched domain support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-2-kprateek.nayak@amd.com
Since upstream commit e75665dd09 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: e75665dd09 ("wifi: wlcore: ensure skb headroom before skb_push")
Cc: Peter Astrand <astrand@lysator.liu.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260318064636.3065925-1-linux@roeck-us.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent.
Fixes: 2e3c873682 ("mac80211: support functions for mesh")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260318034244.2595020-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Focusrite Scarlett 2i2 1st Gen (1235:8006) produces
distorted/silent audio when QUIRK_FLAG_SKIP_IFACE_SETUP is active, as
that flag causes the feedback format to be detected as 17.15 instead
of 16.16.
Add a DEVICE_FLG entry for this device before the Focusrite VENDOR_FLG
entry so that it gets no quirk flags, overriding the vendor-wide
SKIP_IFACE_SETUP. This device doesn't have the internal mixer, Air, or
Safe modes that the quirk was designed to protect.
Fixes: 38c322068a ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Tested-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/abmsTjKmQMKbhYtK@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Restore the SPDX tag that was accidentally dropped.
Fixes: 7e4b6c9430 ("tracing: add more symbols to whitelist")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260317194252.1890568-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI Atlas button driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3429591.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Getting engine specific CTX TIMESTAMP register can fail. In that case,
if the context is active, new_ts is uninitialized. Fix that case by
initializing new_ts to the last value that was sampled in SW -
lrc->ctx_timestamp.
Flagged by static analysis.
v2: Fix new_ts initialization (Ashutosh)
Fixes: bb63e7257e ("drm/xe: Avoid toggling schedule state to check LRC timestamp in TDR")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260312125308.3126607-2-umesh.nerlige.ramappa@intel.com
Problem: individual swidle counter names (C1, C1+, C1-, etc.) cannot be
selected via --show/--hide due to two bugs in probe_cpuidle_counts():
1. The function returns immediately when BIC_cpuidle is not enabled,
without checking deferred_add_index.
2. The deferred name check runs against name_buf before the trailing
newline is stripped, so is_deferred_add("C1\n") never matches "C1".
Fix:
1. Relax the early return to pass through when deferred names are
queued.
2. Strip the trailing newline from name_buf before performing deferred
name checks.
3. Check each suffixed variant (C1+, C1, C1-) individually so that
e.g. "--show C1+" enables only the requested metric.
In addition, introduce a helper function to avoid repeating the
condition (readability cleanup).
Fixes: ec4acd3166 ("tools/power turbostat: disable "cpuidle" invocation counters, by default")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
