In the error path for efa_com_alloc_comp_ctx() the semaphore assigned to
&aq->avail_cmds is not released.
Detected by Smatch:
drivers/infiniband/hw/efa/efa_com.c:662 efa_com_cmd_exec() warn:
inconsistent returns '&aq->avail_cmds'
Add release for &aq->avail_cmds in efa_com_alloc_comp_ctx() error path.
Fixes: ef3b06742c ("RDMA/efa: Fix use of completion ctx after free")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260314045730.1143862-1-ethantidmore06@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When IOVA-based DMA mapping is unavailable (e.g., IOMMU
passthrough mode), rdma_rw_ctx_init_bvec() falls back to
checking rdma_rw_io_needs_mr() with the raw bvec count.
Unlike the scatterlist path in rdma_rw_ctx_init(), which
passes a post-DMA-mapping entry count that reflects
coalescing of physically contiguous pages, the bvec path
passes the pre-mapping page count. This overstates the
number of DMA entries, causing every multi-bvec RDMA READ
to consume an MR from the QP's pool.
Under NFS WRITE workloads the server performs RDMA READs
to pull data from the client. With the inflated MR demand,
the pool is rapidly exhausted, ib_mr_pool_get() returns
NULL, and rdma_rw_init_one_mr() returns -EAGAIN. svcrdma
treats this as a DMA mapping failure, closes the connection,
and the client reconnects -- producing a cycle of 71% RPC
retransmissions and ~100 reconnections per test run. RDMA
WRITEs (NFS READ direction) are unaffected because
DMA_TO_DEVICE never triggers the max_sgl_rd check.
Remove the rdma_rw_io_needs_mr() gate from the bvec path
entirely, so that bvec RDMA operations always use the
map_wrs path (direct WR posting without MR allocation).
The bvec caller has no post-DMA-coalescing segment count
available -- xdr_buf and svc_rqst hold pages as individual
pointers, and physical contiguity is discovered only during
DMA mapping -- so the raw page count cannot serve as a
reliable input to rdma_rw_io_needs_mr(). iWARP devices,
which require MRs unconditionally, are handled by an
earlier check in rdma_rw_ctx_init_bvec() and are unaffected.
Fixes: bea28ac14c ("RDMA/core: add MR support for bvec-based RDMA operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260313194201.5818-3-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When IOMMU passthrough mode is active, ib_dma_map_sgtable_attrs()
produces no coalescing: each scatterlist page maps 1:1 to a DMA
entry, so sgt.nents equals the raw page count. A 1 MB transfer
yields 256 DMA entries. If that count exceeds the device's
max_sgl_rd threshold (an optimization hint from mlx5 firmware),
rdma_rw_io_needs_mr() steers the operation into the MR
registration path. Each such operation consumes one or more MRs
from a pool sized at max_rdma_ctxs -- roughly one MR per
concurrent context. Under write-intensive workloads that issue
many concurrent RDMA READs, the pool is rapidly exhausted,
ib_mr_pool_get() returns NULL, and rdma_rw_init_one_mr() returns
-EAGAIN. Upper layer protocols treat this as a fatal DMA mapping
failure and tear down the connection.
The max_sgl_rd check is a performance optimization, not a
correctness requirement: the device can handle large SGE counts
via direct posting, just less efficiently than with MR
registration. When the MR pool cannot satisfy a request, falling
back to the direct SGE (map_wrs) path avoids the connection
reset while preserving the MR optimization for the common case
where pool resources are available.
Add a fallback in rdma_rw_ctx_init() so that -EAGAIN from
rdma_rw_init_mr_wrs() triggers direct SGE posting instead of
propagating the error. iWARP devices, which mandate MR
registration for RDMA READs, and force_mr debug mode continue
to treat -EAGAIN as terminal.
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260313194201.5818-2-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously, this driver only advertised support for 48 kHz and
96 kHz sample rates, as there was no PLL configuration data
specified for any other sample rate/BCLK.
The CS42L84 is an Apple-specific variant of CS42L42. The PLL
configuration parameters for a variety of common BCLKs are
available in the latter's datasheet. What happens if we just
use those? As it turns out, they work just fine.
Fill out more PLL config parameters in the PLL config lookup
table, and advertise the corresponding sample rates to userspace.
This enables 44.1, 88.2, 176.4 and 192 kHz output and input.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260314-cs42l84-rates-v2-1-ea8a5af52542@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Robby Cai <robby.cai@nxp.com> says:
The FP9931 regulator requires a valid "vin" supply to operate correctly.
Therefore, the driver should treat "vin" as a mandatory supply.
This patchset updates the binding documentation to mark vin-supply as a
required property, and modifies the driver accordingly. As suggested in
the reviews from Andreas and Mark, v2 switches to using
devm_regulator_get() since the supply is mandatory.
The FP9931 requires a mandatory "vin" power supply to operate.
Replace devm_regulator_get_optional() with devm_regulator_get() to
enforce this mandatory dependency.
Fixes: 12d821bd13 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Link: https://patch.msgid.link/20260313133102.2749890-3-robby.cai@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FP9931 requires a vin power supply to operate, so mark vin-supply as
a required property in the binding.
Fixes: 80bbdefdfb ("dt-bindings: regulator: Add Fitipower FP9931/JD9930")
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Link: https://patch.msgid.link/20260313133102.2749890-2-robby.cai@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the airplane mode button for AMD, HP and
Xiaomi laptops driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9607409.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3953848.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Topstar Laptop ACPI Extras driver from
an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10834824.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3425557.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When tests fail, the runner only printed the failure count, making
it hard to tell which tests failed without scrolling through output.
Track failed test names in an array and print them after the summary
so failures are immediately visible at the end of the run.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Programmable IO Control (pic) part of
the Sony laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2059875.yKVeVyVuyW@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Notebook Control (nc) part of the Sony
laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/886676729.0ifERbkFSE@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2559802.jE0xQCEvom@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the LG Gram ACPI features and hotkeys driver
from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1868365.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, drop the debug-only
notify handler method from the driver.
No intentional functional impact beyond debug.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3346280.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Channel Allocation (PB4) and Level Shift Information (PB5) are
configured with values from PB1 and PB2 due to the wrong offset
being used. This results in missing audio channels or incorrect
speaker placement when playing multi-channel audio.
Use the correct offset to fix multi-channel audio output.
Fixes: fd0141d1a8 ("drm/bridge: synopsys: Add audio support for dw-hdmi-qp")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260228112822.4056354-1-christianshewitt@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The current interrupt handler only checks the GENI main IRQ status
(m_irq) before deciding to return IRQ_NONE. This can lead to spurious
IRQ_NONE returns when DMA interrupts are pending but m_irq is zero.
Move the DMA TX/RX status register reads to the beginning of the ISR,
right after reading m_irq. Update the early return condition to check
all three status registers (m_irq, dma_tx_status, dma_rx_status) before
returning IRQ_NONE.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260313-spi-geni-qcom-fix-dma-irq-handling-v1-1-0bd122589e02@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function drm_of_get_data_lanes_count_ep() returns negative error
codes and dsi->lanes is an unsigned integer, so the check (dsi->lanes <
0) is always impossible.
Make the return value of drm_of_get_data_lanes_count_ep() be assigned to
ret, check for error, and then assign dsi->lanes to ret.
Detected by Smatch:
drivers/gpu/drm/bridge/waveshare-dsi.c:70 ws_bridge_attach_dsi() warn:
unsigned 'dsi->lanes' is never less than zero.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603060341.hNj0pl9L-lkp@intel.com/
Fixes: fca1142842 ("drm/bridge: waveshare-dsi: Add support for 1..4 DSI data lanes")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260307033245.71666-1-ethantidmore06@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Some platforms expose PMT discovery via ACPI instead of PCI BARs. Add a
generic discovery source flag and carry ACPI discovery entries alongside
the existing PCI resource path so PMT clients can consume either.
Changes:
- Add enum intel_vsec_disc_source { _PCI, _ACPI }.
- Extend intel_vsec_platform_info and intel_vsec_device with source enum
and ACPI discovery table pointer/
- When src==ACPI, skip BAR resource setup and copy the ACPI discovery
entries into the aux device.
No user-visible behavior change yet; this only wires ACPI data through vsec
in preparation for ACPI-enumerated PMT clients.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-7-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stop collapsing registration results into booleans. Make
intel_vsec_walk_header() return int and propagate the first non-zero error
from intel_vsec_register_device(). intel_vsec_register() now returns that
error directly and 0 on success.
This preserves success behavior while surfacing meaningful errors instead
of hiding them behind a bool/-ENODEV, which makes debugging and probe
ordering issues clearer.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-6-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Preparatory refactor for ACPI-enumerated PMT endpoints. Several exported
PMT/VSEC interfaces and structs carried struct pci_dev * even though
callers only need a generic struct device. Move those to struct device * so
the same APIs work for PCI and ACPI parents.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This refactor prepares for adding ACPI-enumerated PMT endpoints. While
intel_vsec is bound to PCI today, some helpers are used by code that will
also register PMT endpoints from non-PCI (ACPI) paths. Clean up
PCI-specific plumbing where it isn’t strictly required and rely on generic
struct device where possible.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-4-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Treat PCI id->driver_data (intel_vsec_platform_info) as read-only by making
vsec_priv->info a const pointer and updating all function signatures to
accept const intel_vsec_platform_info *.
This improves const-correctness and clarifies that the platform info data
from the driver_data table is not meant to be modified at runtime.
No functional changes intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-3-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The base_addr field in intel_vsec_platform_info was originally added to
support devices that emulate PCI VSEC capabilities in MMIO. Previously,
the code would check at registration time whether base_addr was set,
falling back to the PCI BAR if not.
Refactor this by making base_addr an explicit function parameter. This
clarifies ownership of the value and removes conditional logic from
intel_vsec_add_dev(). It also enables making intel_vsec_platform_info
const in a later patch, since the function no longer needs to write to
info->base_addr.
No functional change intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
cpu_to_be32() returns a __be32 big-endian value, but the compound literals
passed to tilcdc_panel_update_prop() were typed as u32. This causes a
sparse type mismatch warning. Fix it by using __be32 as the compound
literal type to match the return type of cpu_to_be32().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602200130.LjofC7YE-lkp@intel.com/
Fixes: 0ff223d991 ("drm/tilcdc: Convert legacy panel binding via DT overlay at boot time")
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260305163907.717719-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
CONFIG_KERNEL_MODE_NEON is always enabled on arm64, and it always has
been since its introduction in 2013. Given that and the fact that the
usefulness of kernel-mode NEON has only been increasing over time,
checking for this option in arm64-specific code is unnecessary. Remove
this check from lib/crc/ to simplify the code and prevent any future
bugs where e.g. code gets disabled due to a typo in this logic.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314175744.30620-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The tilcdc_panel driver was removed by commit 8f1e1ab9c7 ("drm/tilcdc:
Remove tilcdc panel driver"), but was inadvertently reintroduced by the
merge commit 8b85987d3c ("Merge drm/drm-next into drm-misc-next").
The regression went unnoticed because standard git commands such as
'git show' do not expose the change. It was only spotted via
'git show --stat':
git show --stat 8b85987d3c | grep tilcdc
drivers/gpu/drm/tilcdc/tilcdc_panel.c | 408 +
git show 8b85987d3c | grep tilcdc
(no output)
Remove tilcdc_panel.c again to restore the previously intended state.
Fixes: 8b85987d3c ("Merge drm/drm-next into drm-misc-next")
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260305155921.659550-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This code just calls crc32c(), which has a number of different
implementations, not just the byte-at-a-time table-based one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260316205659.17936-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove information from the crypto/crc32c.c file comment that is no
longer applicable now that nearly all users of CRC-32C are simply using
the crc32c() library function instead. This continues the cleanup from
commit 0ef6eb10f2 ("crypto: Clean up help text for CRYPTO_CRC32C").
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314173130.16683-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The new option CONFIG_CRC_ENABLE_ALL_FOR_KUNIT enables all the CRC code
that has KUnit tests, causing CONFIG_KUNIT_ALL_TESTS to enable all these
tests. Add this option to all_tests.config so that kunit.py will run
them when passed the --alltests option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314172224.15152-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the generated file powerpc/aesp8-ppc.S be removed by 'make clean'.
Fixes: 7cf2082e74 ("lib/crypto: powerpc/aes: Migrate POWER8 optimized code into library")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260317044925.104184-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add NULL pointer checks for dev->type before accessing
dev->type->name in ISP genpd add/remove functions to
prevent kernel crashes.
This regression was introduced in v7.0 as the wakeup sources
are registered using physical device instead of ACPI device.
This led to adding wakeup source device as the first child of
AMDGPU device without initializing dev-type variable, and
resulted in segfault when accessed it in the amdgpu isp driver.
Fixes: 057edc58aa ("ACPI: PM: Register wakeup sources under physical devices")
Suggested-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c51632d1ed)
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Cc: Benjamin Cheng <benjamin.cheng@amd.com>
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e14d468304)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dea5f235ba)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 04f063d850)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f14f27bbe2)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1441f52c7f)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5f76083183)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89cd90375c)
Cc: stable@vger.kernel.org
The value should never exceed the array size as those
are the only values the hardware is expected to return,
but add checks anyway.
Reviewed-by: Benjamin Cheng <benjamin.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e064cef4b5)
Cc: stable@vger.kernel.org
The ASICREV_IS_BEIGE_GOBY_P check always took precedence, because it includes all chip revisions upto NV_UNKNOWN.
Fixes: 54b822b3ea ("drm/amd/display: Use dce_version instead of chip_id")
Signed-off-by: Andy Nguyen <theofficialflow1996@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9c7be0efa6)
parse_edid_displayid_vrr() searches the EDID extension blocks for a
DisplayID extension before parsing the dynamic video timing range.
The code previously checked whether edid_ext was NULL after the search
loop. However, edid_ext is assigned during each iteration of the loop,
so it will never be NULL once the loop has executed. If no DisplayID
extension is found, edid_ext ends up pointing to the last extension
block, and the NULL check does not correctly detect the failure case.
Instead, check whether the loop completed without finding a matching
DisplayID block by testing "i == edid->extensions". This ensures the
function exits early when no DisplayID extension is present and avoids
parsing an unrelated EDID extension block.
Also simplify the EDID validation check using "!edid ||
!edid->extensions".
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:13079 parse_edid_displayid_vrr() warn: variable dereferenced before check 'edid_ext' (see line 13075)
Fixes: a638b837d0 ("drm/amd/display: Fix refresh rate range for some panel")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91c7e6342e)
[Why]
The dcn32_override_min_req_memclk function is in dcn32_fpu.c, which is
compiled with CC_FLAGS_FPU into FP instructions. So when we call it we
must use DC_FP_{START,END} to save and restore the FP context, and
prepare the FP unit on architectures like LoongArch where the FP unit
isn't always on.
Reported-by: LiarOnce <liaronce@hotmail.com>
Fixes: ee7be8f3de ("drm/amd/display: Limit DCN32 8 channel or less parts to DPM1 for FPO")
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25bb1d54ba)
Cc: stable@vger.kernel.org
Commit e1b385726f ("drm/amd/display: Add additional checks for PSP
footer size") introduced a use of an uninitialized stack variable
in dm_dmub_sw_init() (region_params.bss_data_size).
Interestingly, this seems to cause no issue on normal kernels. But when
full LTO is enabled, it causes the compiler to "optimize" out huge
swaths of amdgpu initialization code, and the driver is unusable:
amdgpu 0000:03:00.0: [drm] Loading DMUB firmware via PSP: version=0x07002F00
amdgpu 0000:03:00.0: sw_init of IP block <dm> failed 5
amdgpu 0000:03:00.0: amdgpu_device_ip_init failed
amdgpu 0000:03:00.0: Fatal error during GPU init
It surprises me that neither gcc nor clang emit a warning about this: I
only found it by bisecting the LTO breakage.
Fix by using the bss_data_size field from fw_meta_info_params, as was
presumably intended.
Fixes: e1b385726f ("drm/amd/display: Add additional checks for PSP footer size")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7f1402f6a)
