Some definitions in the arm64 kernel's cputype.h are kernel specific and
cause perf build failures when the header is synced into tools.
Stop checking arm64's cputype.h. In the future, the header in tools
will be updated manually when teaching tools about new CPUs.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the spinlock implementation compatible with lock context analysis
(CONTEXT_ANALYSIS := 1) by adding lock context annotations to the
_raw_##op##_...() macros.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-4-bvanassche@acm.org
Convert do_raw_{read,write}_trylock() from macros into inline functions
and annotate these inline functions with __cond_acquires_shared() or
__cond_acquires() as appropriate. This change is necessary to build
kernel drivers or subsystems that use rwlock synchronization objects with
lock context analysis enabled. The return type 'int' matches the return
type for CONFIG_DEBUG_SPINLOCK=y.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-3-bvanassche@acm.org
Architecture support for rwlocks must be available whether or not
CONFIG_DEBUG_SPINLOCK has been defined. Move the definitions of the
arch_{read,write}_{lock,trylock,unlock}() macros such that these become
visbile if CONFIG_DEBUG_SPINLOCK=n.
This patch prepares for converting do_raw_{read,write}_trylock() into
inline functions. Without this patch that conversion triggers a build
failure for UP architectures, e.g. arm-ep93xx. I used the following
kernel configuration to build the kernel for that architecture:
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=n
CONFIG_ATAGS=y
CONFIG_MMU=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_ARCH_EP93XX=y
Fixes: fb1c8f93d8 ("[PATCH] spinlock consolidation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-2-bvanassche@acm.org
KASAN-enabled kernels with LOCKDEP and PREEMPT_FULL hit
"BUG: MAX_STACK_TRACE_ENTRIES too low!" within 9-23 hours of normal
desktop use.
The root cause is a feedback loop between KASAN slab tracking and
lockdep: every KASAN-tracked slab allocation saves a stack trace via
stack_trace_save() -> arch_stack_walk(). The unwinder calls
is_bpf_text_address(), which under PREEMPT_FULL can trigger RCU
deferred quiescent-state processing -> swake_up_one() -> lock_acquire()
-> lockdep validate_chain() -> save_trace(). This means KASAN's own
stack captures indirectly generate new lockdep dependency chains,
consuming the buffer from both directions.
/proc/lockdep_stats at the moment of overflow confirms that
stack-trace entries is the sole exhausted resource:
stack-trace entries: 524288 [max: 524288] <- 100% full
number of stack traces: 22080 <- unique after dedup
dependency chains: 164665 [max: 524288] <- only 31% used
direct dependencies: 45270 [max: 65536] <- 69%
lock-classes: 2811 [max: 8192] <- 34%
22080 genuinely unique traces averaging ~24 frames each fill the
buffer in under a day. The hash-based deduplication (12593b7467) is
working correctly -- the traces are simply all different due to the
deep and varied call stacks from GPU + filesystem + Wine/Proton + KASAN
instrumentation.
Raise the LOCKDEP_STACK_TRACE_BITS default from 19 to 21 when KASAN is
enabled (2M entries, +12MB). This is negligible compared to KASAN's
own shadow memory overhead (~12.5% of total RAM). Scale
LOCKDEP_STACK_TRACE_HASH_BITS accordingly to maintain dedup efficiency.
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171118.1702954-2-mikhail.v.gavrilov@gmail.com
Andrew reported that a guard() conversion of zone_lock increased the
code size unnecessarily.
It turns out the unconditional __GUARD_IS_ERR() is to blame. As
explored earlier [1], __GUARD_IS_ERR(), similar to IS_ERR_OR_NULL(),
generates somewhat sub-optimal code.
However, looking at things again, it is possible to avoid doing the
__GUARD_IS_ERR() unconditionally. Revert the normal destructors to a
simple NULL test and only add the IS_ERR bit to COND guards.
This cures the reported overhead; as compiled by GCC-16:
page_alloc.o:
pre: Total: Before=45299, After=45371, chg +0.16%
post: Total: Before=45299, After=45026, chg -0.60%
[1] https://lkml.kernel.org/r/20250513085001.GC25891@noisy.programming.kicks-ass.net
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260309164516.GE606826@noisy.programming.kicks-ass.net
The extra braces for the initialization of the anonymous union members
were added in commit cd8d860dcc ("jump_label: Fix anonymous union
initialization") to compensate for limitations in gcc < 4.6.
Versions of gcc this old are not supported anymore,
so drop the workaround.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313-jump_label-cleanup-v2-2-35d3c0bde549@linutronix.de
Currently ATOMIC_INIT() is not used because in the past that macro was
provided by linux/atomic.h which is not usable from linux/jump_label.h.
However since commit 7ca8cf5347 ("locking/atomic: Move ATOMIC_INIT
into linux/types.h") the macro only requires linux/types.h.
Remove the now unnecessary workaround and the associated assertions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313-jump_label-cleanup-v2-1-35d3c0bde549@linutronix.de
Commit 1ea4b47350 ("locking/rwsem: Remove the list_head from struct
rw_semaphore") introduced a logic error in rwsem_del_waiter().
The root cause of this issue is an inconsistency in the return values of
__rwsem_del_waiter() and rwsem_del_waiter(). Specifically,
__rwsem_del_waiter() returns true when the wait list becomes empty,
whereas rwsem_del_waiter() is supposed to return true if the wait list
is NOT empty.
This caused a null pointer dereference in rwsem_mark_wake() because it
was being called when sem->first_waiter was NULL.
Fixes: 1ea4b47350 ("locking/rwsem: Remove the list_head from struct rw_semaphore")
Reported-by: syzbot+3d2ff92c67127d337463@syzkaller.appspotmail.com
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: syzbot+3d2ff92c67127d337463@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260314182607.3343346-1-avagin@google.com
Detected by Smatch.
lcnalloc.c:736 ntfs_cluster_alloc() error:
we previously assumed 'rl' could be null (see line 719)
inode.c:3275 ntfs_inode_close() warn:
variable dereferenced before check 'tmp_nis' (see line 3255)
attrib.c:4952 ntfs_attr_remove() warn:
variable dereferenced before check 'ni' (see line 4951)
dir.c:1035 ntfs_readdir() error:
we previously assumed 'private' could be null (see line 850)
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Use IS_ERR_OR_NULL() instead of manual NULL and IS_ERR() checks.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Validate every EA entry only if the buffer length is required to prevent
large memory allocation.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Validate p_ea->ea_name_length tightly, and the used entry size
for every EA.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
if ea_info_qlen exceeds all_ea_size, OOB can happen.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Use NTFS_VOL_GID(not NTFS_VOL_UID) for restoring the gid, and call
ntfs_ea_get_wsl_inode() only when $EA_INFORMATION exists.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e4 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
PSR/PR parameters might change based on update_m_n or update_lrr. Disable
on update_m_n and update_lrr to ensure proper parameters are taken into use
on next PSR enable in intel_psr_post_plane_update.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15771
Fixes: 2bc98c6f97 ("drm/i915/alpm: Compute ALPM parameters into crtc_state->alpm_state")
Cc: <stable@vger.kernel.org> # v6.19+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-2-jouni.hogander@intel.com
media: cx25821-alsa: replace BUG_ON() with WARN_ON()
Avoid crashing the kernel for a recoverable condition
by replacing BUG_ON() with WARN_ON().
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In fimc_runtime_resume(), the return value of
clk_enable(fimc->clock[CLK_GATE]) was not checked. If enabling the clock
fails, subsequent register accesses (fimc_hw_reset() and capture/m2m
resume) may trigger a bus error or undefined behavior.
Fix this by checking the return value. If clk_enable() fails, return the
error immediately, preventing unsafe hardware access.
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_device is registered during probe but was not being unregistered
during remove. Add the missing v4l2_device_unregister() call to properly
clean up resources.
Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The old hans.verkuil@cisco.com email, long since dead, still pops up
once in a while when using get_maintainer.pl. Add it back to .mailmap
so it is mapped to a working email.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Years passed since I stopped being involved in development of these
drivers. Don't possess hardware samples, too.
Signed-off-by: Andriy Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The bcm2835-camera driver was dropped in commit <90204a38a7>.
Remove the paragraph in Kconfig making reference to it.
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The bcm2835-camera driver was dropped in commit <90204a38a7>, but it
is still mentioned as a current driver in a comment section.
Remove the comment making reference to it.
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Document the zDML (Audi Digital Matrix Light) color mapping option for
the inputs and the new outputs color mapping property.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add zDML (a special signal mapping as used in Audi Digital Matrix Lights)
color mapping support. In addition to extending the already existing color
mapping property of the inputs, the same property is added for the outputs
that must be configured in the same way as the inputs.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The "magic" temperature formula must be computed using a signed integer for
negative temperatures to work properly.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix incorrect plural form of the uncountable noun 'hardware' in the
legacy DVB audio documentation.
Signed-off-by: Nauman Sabir <officialnaumansabir@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use scoped for_each_compatible_node_scoped() loop when iterating over
device nodes to make code a bit simpler.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The definition of PI in the driver is not the actual value in radians,
but rather degrees. Since we are going to have a value in radians
defined in a global header, rename this definition to avoid potential
collisions. No functional changes.
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This function initializes two large structures with arrays. On at least
parisc, the specific code sequence here leads to a badly misoptimized
output from the compiler along with a warning about the resulting
excessive stack usage from many spilled variables:
drivers/media/tuners/mxl5005s.c: In function 'MXL5005_ControlInit.isra':
drivers/media/tuners/mxl5005s.c:1660:1: warning: the frame size of 1400 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Splitting this one function into two functions avoids this because there
are few temporaries that can be spilled to the stack in each of the smaller
structures, so this avoids the warning and also improves readability.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305102745.12032-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305102745.12032-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change gpib_class to be a const struct class and drop the
class_create() call.
Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260303192124.3855792-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two GPIB drivers have unnecessary empty module_init and module_exit
functions. Remove them. Note that if a module_init function exists, a
module_exit function must also exist; otherwise, the module cannot be
unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131014152.35875-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LPVO driver apparently includes a more or less verbatim copy of the
USB skeleton driver.
Replace the "skel_" symbol prefix with "lpvo_" and rename the "usb_skel"
struct "lpvo" to avoid symbol name clashes and make this a bit more
palatable.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305151729.10501-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmm3G/UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZJUH/R0vQ3Vha48QDEic
1NREwaHxAoTFi0i3y7OPPklqrP2V09D1qg4Q6fExYQVTQgV6F2DRjVbyPKrmr4ay
BA6aHrUdnFngYHpDlI1b1r7rJiAIN4WFHl7StO70bS+EB+UPsP9cfP3CKXUfKfqT
kyHXzUrd5QnjYmlb9rQw1E6rzsRamNtGUtZf7TwDidJYjtm3sPeDHUkjyRy4xkYd
UouIu6W7UXoicl38bJAgaWBY5BiYtjN6ktnY4/gcqDeqYd7mTM3Eb1B+OSXgFfip
F0OYfJhfWn+63WnPA+1I5jXWC1UrdVXTMK/NTYjhmGlfdmkLcWDlNGtu+qKZbpwj
fmF3Kyo=
=6nX1
-----END PGP SIGNATURE-----
Merge 7.0-rc4 into char-misc-next
We need the char/misc/iio fixes in this branch as well to build on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a device performs DMA to a bounce buffer, KMSAN is unaware of
the write and does not mark the data as initialized. When
swiotlb_bounce() later copies the bounce buffer back to the original
buffer, memcpy propagates the uninitialized shadow to the original
buffer, causing false positive uninit-value reports.
Fix this by calling kmsan_unpoison_memory() on the bounce buffer
before copying it back in the DMA_FROM_DEVICE path, so that memcpy
naturally propagates initialized shadow to the destination.
Suggested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/CAG_fn=WUGta-paG1BgsGRoAR+fmuCgh3xo=R3XdzOt_-DqSdHw@mail.gmail.com/
Fixes: 7ade4f1077 ("dma: kmsan: unpoison DMA mappings")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260315082750.2375581-1-syoshida@redhat.com
Currently HID_PHYS is empty, which means userspace tools (e.g. fwupd)
that depend on it for distinguishing the devices, are unable to do so.
Other drivers like i2c-hid, usbhid, surface-hid, all populate it.
With this change it's set to, for example: HID_PHYS=0000:00:10.0
Each function has just a single HID device, as far as I can tell, so
there is no need to add a suffix.
Tested with fwupd 2.1.1, can avoid https://github.com/fwupd/fwupd/pull/9995
Cc: Even Xu <even.xu@intel.com>
Cc: Xinpeng Sun <xinpeng.sun@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace NULL check with IS_ERR() for devm_platform_ioremap_resource()
return value. Use dev_err_probe() for error handling to maintain
consistency with the rest of the probe function.
Fixes: b7f698b22b ("pinctrl: realtek: Switch to use devm functions")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
