UDP-Lite supports variable-length checksum and has two socket
options, UDPLITE_SEND_CSCOV and UDPLITE_RECV_CSCOV, to control
the checksum coverage.
Let's remove the support.
setsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was only
available for UDP-Lite and returned -ENOPROTOOPT for UDP.
Now, the options are handled in ip_setsockopt() and
ipv6_setsockopt(), which still return the same error.
getsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was available
for UDP and always returned 0, meaning full checksum, but now
-ENOPROTOOPT is returned.
Given that getsockopt() is meaningless for UDP and even the options
are not defined under include/uapi/, this should not be a problem.
$ man 7 udplite
...
BUGS
Where glibc support is missing, the following definitions
are needed:
#define IPPROTO_UDPLITE 136
#define UDPLITE_SEND_CSCOV 10
#define UDPLITE_RECV_CSCOV 11
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP TX paths also have some code for UDP-Lite partial
checksum:
* udplite_csum() in udp_send_skb() and udp_v6_send_skb()
* udplite_getfrag() in udp_sendmsg() and udpv6_sendmsg()
Let's remove such code.
Now, we can use IPPROTO_UDP directly instead of sk->sk_protocol
or fl6->flowi6_proto for csum_tcpudp_magic() and csum_ipv6_magic().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP-Lite supports the partial checksum and the coverage is
stored in the position of the length field of struct udphdr.
In RX paths, udp4_csum_init() / udp6_csum_init() save the value
in UDP_SKB_CB(skb)->cscov and set UDP_SKB_CB(skb)->partial_cov
to 1 if the coverage is not full.
The subsequent processing diverges depending on the value,
but such paths are now dead.
Also, these functions have some code guarded for UDP:
* udp_unicast_rcv_skb / udp6_unicast_rcv_skb
* __udp4_lib_rcv() and __udp6_lib_rcv().
Let's remove the partial csum code and the unnecessary
guard for UDP-Lite in RX.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smack_socket_sock_rcv_skb() is registered as socket_sock_rcv_skb,
which is called as security_sock_rcv_skb() in sk_filter_trim_cap().
Now that UDP-Lite is gone, let's remove the IPPROTO_UDPLITE support
in smack_socket_sock_rcv_skb().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20260311052020.1213705-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since UDP and UDP-Lite shared most of the code, we have had
to check the protocol every time we increment SNMP stats.
Now that the UDP-Lite paths are dead, let's remove UDP-Lite
SNMP stats.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have deprecated IPv6 UDP-Lite sockets.
Let's drop support for IPv4 UDP-Lite sockets as well.
Most of the changes are similar to the IPv6 patch: removing
udplite.c and udp_impl.h, marking most functions in udp_impl.h
as static, moving the prototype for udp_recvmsg() to udp.h, and
adding INDIRECT_CALLABLE_SCOPE for it.
In addition, the INET_DIAG support for UDP-Lite is dropped.
We will remove the remaining dead code in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We cannot create IPv6 UDP-Lite sockets anymore.
Let's remove dead code in IPV6_ADDRFORM.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As announced in commit be28c14ac8 ("udplite: Print deprecation
notice."), it's time to deprecate UDP-Lite.
As a first step, let's drop support for IPv6 UDP-Lite sockets.
We will remove the remaining dead code gradually.
Along with the removal of udplite.c, most of the functions exposed
via udp_impl.h are made static.
The prototypes of udpv6_sendmsg() and udpv6_recvmsg() are moved
to udp.h, but only udpv6_recvmsg() has INDIRECT_CALLABLE_DECLARE()
because udpv6_sendmsg() is exported for rxrpc since commit ed472b0c87
("rxrpc: Call udp_sendmsg() directly").
Also, udpv6_recvmsg() needs INDIRECT_CALLABLE_SCOPE for
CONFIG_MITIGATION_RETPOLINE=n.
Note that udplite.h is included temporarily for udplite_csum().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit a3d2599b24 ("ipv{4,6}/udp{,lite}: simplify proc
registration"), udp4_seq_show() and udp6_seq_show() are not
used in net/ipv4/udplite.c and net/ipv6/udplite.c.
Instead, udp_seq_ops and udp6_seq_ops are exposed to UDP-Lite.
Let's make udp4_seq_show() and udp6_seq_show() static.
udp_seq_ops and udp6_seq_ops are moved to udp_impl.h so that
we can make them static when the header is removed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lt8713sx is a Type-C/DP1.4 to DP1.4/HDMI2.0 converter,
with three configurable DP1.4/HDMI2.0/DP++ output interfaces and
audio output interface.
Driver is required for firmware upgrade and enabling the bridge chip.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-2-6cc2a855aafa@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This enables support for Transparent Huge Pages (THP) for device pages by
using MIGRATE_VMA_SELECT_COMPOUND during migration. It removes the need to
split folios and loop multiple times over all pages to perform required
operations at page level. Instead, we rely on newly introduced support for
higher orders in drm_pagemap and folio-level API.
In Xe, this drastically improves performance when using SVM. The GT stats
below collected after a 2MB page fault show overall servicing is more than
7 times faster, and thanks to reduced CPU overhead the time spent on the
actual copy goes from 23% without THP to 80% with THP:
Without THP:
svm_2M_pagefault_us: 966
svm_2M_migrate_us: 942
svm_2M_device_copy_us: 223
svm_2M_get_pages_us: 9
svm_2M_bind_us: 10
With THP:
svm_2M_pagefault_us: 132
svm_2M_migrate_us: 128
svm_2M_device_copy_us: 106
svm_2M_get_pages_us: 1
svm_2M_bind_us: 2
v2:
- Fix one occurrence of drm_pagemap_get_devmem_page() (Matthew Brost)
v3:
- Remove migrate_device_split_page() and folio_split_lock, instead rely on
free_zone_device_folio() to split folios before freeing (Matthew Brost)
- Assert folio order is HPAGE_PMD_ORDER (Matthew Brost)
- Always use folio_set_zone_device_data() in split (Matthew Brost)
v4:
- Warn on compound device page, s/continue/goto next/ (Matthew Brost)
v5:
- Revert warn on compound device page
- s/zone_device_page_init()/zone_device_folio_init() (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-5-francois.dugast@intel.com
cpages returned from migrate_vma_setup represents the total number of
individual pages found, not the number of 4K pages. The math in
drm_pagemap_migrate_to_devmem for npages is based on the number of 4K
pages, so cpages != npages can fail even if the entire memory range is
found in migrate_vma_setup (e.g., when a single 2M page is found).
Add drm_pagemap_cpages, which converts cpages to the number of 4K pages
found.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-4-francois.dugast@intel.com
This new helper helps ensure all accesses to zone_device_data use the
correct API whether the page is part of a folio or not.
v2:
- Move to drm_pagemap.h, stick to folio_zone_device_data (Matthew Brost)
- Return struct drm_pagemap_zdd * (Matthew Brost)
v3:
- Add stub for !CONFIG_ZONE_DEVICE (CI)
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-3-francois.dugast@intel.com
If the page is part of a folio, unlock and put the whole folio at once
instead of individual pages one after the other. This will reduce the
amount of operations once device THP are in use.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-2-francois.dugast@intel.com
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
Cc: stable@vger.kernel.org
Fixes: 919bb54e98 ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-8-zhanjun.dong@intel.com
If the firmware fails to load in GT resets the device is wedged also
initiating a GuC state cleanup.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-7-zhanjun.dong@intel.com
The GuC CT state transition requires moving to the STOP state before
entering the DISABLED state. Update the driver teardown sequence to make
the proper state machine transitions.
Fixes: ee4b32220a ("drm/xe/guc: Add devm release action to safely tear down CT")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-6-zhanjun.dong@intel.com
Replace the magic number 2 with the proper enum value
XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET for better code readability
and maintainability.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-5-zhanjun.dong@intel.com
The intent of wedging a device is to allow queues to continue running
only in wedged mode 2. In other modes, queues should initiate cleanup
and signal all remaining fences. Fix xe_guc_submit_wedge to correctly
clean up queues when wedge mode != 2.
Fixes: 7dbe8af13c ("drm/xe: Wedge the entire device")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-4-zhanjun.dong@intel.com
In GuC submit fini, forcefully tear down any exec queues by disabling
CTs, stopping the scheduler (which cleans up lost G2H), killing all
remaining queues, and resuming scheduling to allow any remaining cleanup
actions to complete and signal any remaining fences.
Split guc_submit_fini into device related and software only part. Using
device-managed and drm-managed action guarantees the correct ordering of
cleanup.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-3-zhanjun.dong@intel.com
xe_guc_submit_pause_abort is intended to be called after something
disastrous occurs (e.g., VF migration fails, device wedging, or driver
unload) and should immediately trigger the teardown of remaining
submission state. With that, kill any remaining queues in this function.
Fixes: 7c4b7e34c8 ("drm/xe/vf: Abort VF post migration recovery on failure")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-2-zhanjun.dong@intel.com
Extending these APIs with a flush argument:
dma_direct_unmap_phys(), dma_direct_map_phys(), and
dma_direct_sync_single_for_cpu(). For single-buffer cases, flush=true
would be used, while for SG cases flush=false would be used, followed
by a single flush after all cache operations are issued in
dma_direct_{map,unmap}_sg().
This ultimately benefits dma_map_sg() and dma_unmap_sg().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221337.59951-1-21cnbao@gmail.com
Currently, arch_sync_dma_for_cpu and arch_sync_dma_for_device
always wait for the completion of each DMA buffer. That is,
issuing the DMA sync and waiting for completion is done in a
single API call.
For scatter-gather lists with multiple entries, this means
issuing and waiting is repeated for each entry, which can hurt
performance. Architectures like ARM64 may be able to issue all
DMA sync operations for all entries first and then wait for
completion together.
To address this, arch_sync_dma_for_* now batches DMA operations
and performs a flush afterward. On ARM64, the flush is implemented
with a dsb instruction in arch_sync_dma_flush(). On other
architectures, arch_sync_dma_flush() is currently a nop.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Juergen Gross <jgross@suse.com> # drivers/xen/swiotlb-xen.c
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221316.59934-1-21cnbao@gmail.com
dcache_inval_poc_nosync does not wait for the data cache invalidation to
complete. Later, we defer the synchronization so we can wait for all SG
entries together.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221258.59918-1-21cnbao@gmail.com
dcache_clean_poc_nosync does not wait for the data cache clean to
complete. Later, we wait for completion of all scatter-gather entries
together.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221239.59903-1-21cnbao@gmail.com
dcache_by_myline_op ensures completion of the data cache operations for a
region, while dcache_by_myline_op_nosync only issues them without waiting.
This enables deferred synchronization so completion for multiple regions
can be handled together later.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221216.59886-1-21cnbao@gmail.com
rust:
- Fix safety issue in dma_read! and dma_write!.
nova-core:
- Fix UB in DmaGspMem pointer accessors.
- Fix stack overflow in GSP memory allocation.
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable
-----BEGIN PGP SIGNATURE-----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=Aqmr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
nested_svm_vmrun() currently stores the return value of
nested_svm_copy_vmcb12_to_cache() in a local variable 'err', separate
from the generally used 'ret' variable. This is done to have a single
call to kvm_skip_emulated_instruction(), such that we can store the
return value of kvm_skip_emulated_instruction() in 'ret', and then
re-check the return value of nested_svm_copy_vmcb12_to_cache() in 'err'.
The code is unnecessarily confusing. Instead, call
kvm_skip_emulated_instruction() in the failure path of
nested_svm_copy_vmcb12_to_cache() if the return value is not -EFAULT,
and drop 'err'.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260306210900.1933788-3-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls.
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id().
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyOg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaAEAP9xJvKzVtyXBMWxIQNJKqN58VaT/5bNk3tYfm3O
ZOuBrQD+Lsxjvv/pSSKFscZJ/x0dthdYncYI8DF3/G6Lnf+LDAc=
=MT3y
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT.
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyLQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXk4APwKw2HtGyI3OQAHfDBL+wlblPtf8acz0zpDwGCT
9+TWFQD/Rhmtvkb/X/LTwT5PKJksoHOfkD4MqmVMGStKGdxtBAY=
=DJ17
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260313215637.6371-1-rosenp@gmail.com
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment to right after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260313215900.6724-1-rosenp@gmail.com
Currently, there are two helpers to match the root compatible value
against an of_device_id array:
- of_machine_device_match() returns true if a match is found,
- of_machine_get_match_data() returns the match data if a match is
found.
However, there is no helper that returns the actual of_device_id
structure corresponding to the match, leading to code duplication in
various drivers.
Fix this by reworking of_machine_device_match() to return the actual
match structure, and renaming it to of_machine_get_match().
Retain the old of_machine_device_match() functionality using a cheap
static inline wrapper around the new of_machine_get_match() helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/14e1c03d443b1a5f210609ec3a1ebbaeab8fb3d9.1772468323.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq.
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface.
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup.
- Selftest fix for format specifier and buffer length in
file_write_long().
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyHg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZiWAQCmUOHiGAk73p9DDn6Zyrm+o/iQm/iOinchBeUs
ZiG0bgEAn15giAnLCA5Zs6cG7PemxBH1v7ctyzTjh1VsBds0rwo=
=zXix
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
bpf_map__fprintf is unused so delete it, the header file declaring it
and the now unused static helper functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
dump_insn and arch_is_uncond_branch are declared in
intel-pt-insn-decoder.c which is unconditionally part of all perf
builds. Don't declare weak versions of these symbols that will be unused.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Function is only used by symsrc__init in symbol-elf.c, make static to
reduce scope. Switch to not passing the argument by value but as a
pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes.
- Fix rust cross compilation.
- hashmap__new() error pointer return handling fixes.
- Fix off-by-one bug in outside of functions check on the disasm code.
- Update header copies of kernel headers, including prctl.h, mount.h, fs.h,
irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h msr-index.h,
also the syscall tables files that introduced the 'rseq_slice_yield' syscall.
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to sync
the coresight-pmu.h header with the kernel sources.
- Make in-target rule robust against too long argument error.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCabQnlgAKCRCyPKLppCJ+
J0IWAQCeY+O8/Jn4UsLwYdDqP8merPdD6uqyOocb83CTz1TOVAEA0Szl3dkKDrAt
uZMwyfgBMqxmNtYkzJ5DIZzMGJTT8Qs=
=BE0p
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes
- Fix rust cross compilation
- hashmap__new() error pointer return handling fixes
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
- Revert IRQ entry/exit path optimization that incorrectly cleared some
PSW bits before irqentry_exit(), causing boot failures with linux-next
and HRTIMER_REARM_DEFERRED (which only uncovered the problem)
- Fix zcrypt code to show CCA card serial numbers even when the default
crypto domain is offline by selecting any domain available, preventing
empty sysfs entries
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmm0UXkACgkQjYWKoQLX
FBg+fQf/Xm2n+N1GOw1/Xm7Vlw8x9+oaOxVwQUATRnF3Km6HL3DYyNzqTUS6ANcx
oSCkFhZapk8DuQeB/gkMeLiGYMSrh73X0DapoSp4YQdMPwLyRt+0VNDJs2OppZrS
mmlbodxYiQcLcVd0PMkx+YIJ2QbMsqkB2/rQh/icksG2HCIA029p5LowZ7Xcb2q+
zUbP1QbWkmY6ZD2KFpiIvnJnVo0zlJIc0LZAuRS7r470TlSSRrlCuhP7Zdm0P3jQ
Jc33/SQ2NrHO5c+CRbqzql8QdXBMJKAyHhp+lH53G/BuGCynsZbP2+cVev+eXxJw
Xq7j1P4kHh8Wy83d5OvjVk/JTTpSfQ==
=Blff
-----END PGP SIGNATURE-----
Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
If the entry is NULL the value is meaningless so early return NULL to
avoid an increment of NULL. This was happening in calls from
has_stitched_lbr when running the "perf record LBR tests". The return
value isn't used in that case, so returning NULL as no effect.
Fixes: 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add myself, Dexuan, and Long as maintainers. Deepak is stepping down
from these responsibilities.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
