This function is meant to test the global interrupt registers and the
PCIe IP MSI-X functionality. It essentially goes through and tests
various combinations of the set, clear, and mask bits in order to
verify the behavior is as we expect it to be from the driver.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-4-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register test will be used to verify hardware is behaving as expected.
The test itself will have us writing to registers that should have no
side effects due to us resetting after the test has been completed.
While the test is being run the interface should be offline.
This patch counts on the first patch of this series to export netif_open()
and also ensures that the half close calls netif_close() to
avoid deadlock.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-3-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev_open() already is exported, but drivers which use the netdev
instance lock need to use netif_open() instead. netif_close() is
also already exported [1] so this completes the pairing.
This export is required for the following fbnic self tests to
avoid calling ndo_stop() and ndo_open() in favor of the
more appropriate netif_open() and netif_close() that notifies
any listeners that the interface went down to test and is now
coming back up.
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me [1]
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the header to pull in the changes from commit 3285c471d0
("coresight: Remove misleading definitions").
Signed-off-by: James Clark <james.clark@linaro.org>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/557db631-aef8-43b1-9f45-fae75910ccb4@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a part of MANA hardening for CVM, add validation for the doorbell
ID (db_id) received from hardware in the GDMA_REGISTER_DEVICE response
to prevent out-of-bounds memory access when calculating the doorbell
page address.
In mana_gd_ring_doorbell(), the doorbell page address is calculated as:
addr = db_page_base + db_page_size * db_index
= (bar0_va + db_page_off) + db_page_size * db_index
A hardware could return values that cause this address to fall outside
the BAR0 MMIO region. In Confidential VM environments, hardware responses
cannot be fully trusted.
Add the following validations:
- Store the BAR0 size (bar0_size) in gdma_context during probe.
- Validate the doorbell page offset (db_page_off) read from device
registers does not exceed bar0_size during initialization, converting
mana_gd_init_registers() to return an error code.
- Validate db_id from GDMA_REGISTER_DEVICE response against the
maximum number of doorbell pages that fit within BAR0.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260306211212.543376-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NPU 60XX uses the default boot params location specified
in the firmware image header, consistent with earlier generations.
Remove the unnecessary MMIO register write, freeing the AON register
for future use.
Fixes: 44e4c88951 ("accel/ivpu: Implement warm boot flow for NPU6 and unify boot handling")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260305142226.194995-1-andrzej.kacprowski@linux.intel.com
(cherry picked from commit 81e62e7bf8)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b6 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows to set GDM forward port configuration to
FE_PSE_PORT_DROP stopping the network device. Hw design requires to stop
packet forwarding putting the interface down. Moreover, PPE firmware
requires to use PPE1 for GDM3 or GDM4.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-gdm-forward-ndo-open-stop-v1-1-7b7a20dd9ef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
Add a driver for the pin controller in the Low Power Audio SubSystem
(LPASS) on the Milos SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
My easystack email will be unreachable soon, update my email address to
linux.dev one.
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While head_onwire_len() has a branch to handle ctrl_len == 0 case,
prepare_read_control() always sets up a kvec for the CRC meaning that
a non-empty control segment is effectively assumed. All frames that
clients deal with meet that assumption, so let's make it official and
treat the preamble with an empty control segment as malformed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Similar checks are performed for all control frames, but an early check
for message frames was missing. process_message() is already set up to
terminate the loop in case the state changes while con->ops->dispatch()
handler is being executed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
As per [1], we need one "use" item per line, in order to reduce merge
conflicts. Furthermore, we need a trailing ", //" in order to tell
rustfmt(1) to leave it alone.
This does that for commands.rs, which is the only file in nova-core that
has any remaining instances of the old style.
[1] https://docs.kernel.org/rust/coding-guidelines.html#imports
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-7-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
A tiny simplification: now that FbLayout uses its own specific FbRange
type, add an FbRange.len() method, and use that to (very slightly)
simplify the calculation of Frts::frts_size initialization.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-3-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
For convenience of the reader: now you can directly see the sizes of
each range. It is surprising just how much this helps.
Sample output (using an Ampere GA104):
NovaCore 0000:e1:00.0: FbLayout {
fb: 0x0..0x3ff800000 (16376 MiB),
vga_workspace: 0x3ff700000..0x3ff800000 (1 MiB),
frts: 0x3ff600000..0x3ff700000 (1 MiB),
boot: 0x3ff5fa000..0x3ff600000 (24 KiB),
elf: 0x3fb960000..0x3ff5f9000 (60 MiB),
wpr2_heap: 0x3f3900000..0x3fb900000 (128 MiB),
wpr2: 0x3f3800000..0x3ff700000 (191 MiB),
heap: 0x3f3700000..0x3f3800000 (1 MiB),
vf_partition_count: 0x0,
}
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-2-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Raju Rangoju says:
====================
amd-xgbe: RX adaptation and PHY handling fixes
This series fixes several issues in the amd-xgbe driver related to RX
adaptation and PHY handling in 10GBASE-KR mode, particularly when
auto-negotiation is disabled.
Patch 1 fixes link status handling during RX adaptation by correctly
reading the latched link status bit so transient link drops are
detected without losing the current state.
Patch 2 prevents CRC errors that can occur when performing RX
adaptation with auto-negotiation turned off. The driver now stops
TX/RX before re-triggering RX adaptation and only re-enables traffic
once adaptation completes and the link is confirmed up, ensuring
packets are not corrupted during the adaptation window.
Patch 3 restores the intended ordering of PHY reset relative to
phy_start(), making sure PHY settings are reset before the PHY is
started instead of afterwards.
====================
Link: https://patch.msgid.link/20260306111629.1515676-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
commit f93505f357 ("amd-xgbe: let the MAC manage PHY PM") moved
xgbe_phy_reset() from xgbe_open() to xgbe_start(), placing it after
phy_start(). As a result, the PHY settings were being reset after the
PHY had already started.
Reorder the calls so that the PHY settings are reset before
phy_start() is invoked.
Fixes: f93505f357 ("amd-xgbe: let the MAC manage PHY PM")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-4-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When operating in 10GBASE-KR mode with auto-negotiation disabled and RX
adaptation enabled, CRC errors can occur during the RX adaptation
process. This happens because the driver continues transmitting and
receiving packets while adaptation is in progress.
Fix this by stopping TX/RX immediately when the link goes down and RX
adaptation needs to be re-triggered, and only re-enabling TX/RX after
adaptation completes and the link is confirmed up. Introduce a flag to
track whether TX/RX was disabled for adaptation so it can be restored
correctly.
This prevents packets from being transmitted or received during the RX
adaptation window and avoids CRC errors from corrupted frames.
The flag tracking the data path state is synchronized with hardware
state in xgbe_start() to prevent stale state after device restarts.
This ensures that after a restart cycle (where xgbe_stop disables
TX/RX and xgbe_start re-enables them), the flag correctly reflects
that the data path is active.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-3-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The link status bit is latched low to allow detection of momentary
link drops. If the status indicates that the link is already down,
read it again to obtain the current state.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-2-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ]
Fixes: 6e1cb38a2a ("x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping")
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260306-x2apic-fix-v2-1-bee99c12efa3@sony.com
Clamping 'val' to itself is unnecessary and the expression can be
simplified by using min() instead. Casting SPRD_THM_RAW_DATA_HIGH to u32
is also redundant and can be removed.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260310102523.201722-3-thorsten.blum@linux.dev
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
When probe fails due to unclear interrupt status register, it returns
a positive number instead of the proper error code. Fix this accordingly.
Fixes: e6cbbe4294 ("pinctrl: Add Cypress cy8c95x0 support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202602271847.vVWkqLBD-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
mctp_flow_prepare_output() checks key->dev and may call
mctp_dev_set_key(), but it does not hold key->lock while doing so.
mctp_dev_set_key() and mctp_dev_release_key() are annotated with
__must_hold(&key->lock), so key->dev access is intended to be
serialized by key->lock. The mctp_sendmsg() transmit path reaches
mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()
without holding key->lock, so the check-and-set sequence is racy.
Example interleaving:
CPU0 CPU1
---- ----
mctp_flow_prepare_output(key, devA)
if (!key->dev) // sees NULL
mctp_flow_prepare_output(
key, devB)
if (!key->dev) // still NULL
mctp_dev_set_key(devB, key)
mctp_dev_hold(devB)
key->dev = devB
mctp_dev_set_key(devA, key)
mctp_dev_hold(devA)
key->dev = devA // overwrites devB
Now both devA and devB references were acquired, but only the final
key->dev value is tracked for release. One reference can be lost,
causing a resource leak as mctp_dev_release_key() would only decrease
the reference on one dev.
Fix by taking key->lock around the key->dev check and
mctp_dev_set_key() call.
Fixes: 67737c4572 ("mctp: Pass flow data & flow release events to drivers")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://patch.msgid.link/20260306031402.857224-1-dg573847474@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9
When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:
bond_dev->header_ops = slave_dev->header_ops;
This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.
Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.
The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.
The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:
ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1
Fixes: 1284cd3a2b ("bonding: two small fixes for IPoIB support")
Suggested-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260306021508.222062-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is needed to inline these helpers into Rust code.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105-define-rust-helper-v2-9-51da5f454a67@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is needed to inline these helpers into Rust code.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260105-define-rust-helper-v2-4-51da5f454a67@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Document the SDM670 LMh.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-3-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Add the compatible for the thermal sensors on the SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-2-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
In hi3110_open(), the return value of hi3110_power_enable() is not checked.
If power enable fails, the device may not function correctly, while the
driver still returns success.
Add a check for the return value and propagate the error accordingly.
Signed-off-by: Wenyuan Li <2063309626@qq.com>
Link: https://patch.msgid.link/tencent_B5E2E7528BB28AA8A2A56E16C49BD58B8B07@qq.com
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
[mkl: adjust subject, commit message and jump label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit b360a13d44 ("can: dev: print bitrate error with two decimal
digits") changed calculation of the bit rate error from on-tenth of a
percent to on-hundredth of a percent, but forgot to adjust the scale of the
CAN_CALC_MAX_ERROR constant.
Keeping the existing logic unchanged: Only when the bitrate error exceeds
5% should an error be returned. Otherwise, simply output a warning log.
Fixes: b360a13d44 ("can: dev: print bitrate error with two decimal digits")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260306-can-fix-v1-1-ac526cec6777@nxp.com
Cc: stable@kernel.org
[mkl: improve commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When 'midev->allow_rx' is false, the newly allocated skb isn't consumed
by netif_rx(), it needs to free the skb directly.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Link: https://patch.msgid.link/20260305143240.97592-1-haiyuewa@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
obj_exts_alloc_size() prevents recursive allocation of slabobj_ext
array from the same cache, to avoid creating slabs that are never freed.
There is one mistake that returns the original size when memory
allocation profiling is disabled. The assumption was that
memcg-triggered slabobj_ext allocation is always served from
KMALLOC_CGROUP type. But this is wrong [1]: when the caller specifies
both __GFP_RECLAIMABLE and __GFP_ACCOUNT with SLUB_TINY enabled, the
allocation is served from normal kmalloc. This is because kmalloc_type()
prioritizes __GFP_RECLAIMABLE over __GFP_ACCOUNT, and SLUB_TINY aliases
KMALLOC_RECLAIM with KMALLOC_NORMAL.
As a result, the recursion guard is bypassed and the problematic slabs
can be created. Fix this by removing the mem_alloc_profiling_enabled()
check entirely. The remaining is_kmalloc_normal() check is still
sufficient to detect whether the cache is of KMALLOC_NORMAL type and
avoid bumping the size if it's not.
Without SLUB_TINY, no functional change intended.
With SLUB_TINY, allocations with __GFP_ACCOUNT|__GFP_RECLAIMABLE
now allocate a larger array if the sizes equal.
Reported-by: Zw Tang <shicenci@gmail.com>
Fixes: 280ea9c315 ("mm/slab: avoid allocating slabobj_ext array from its own slab")
Closes: https://lore.kernel.org/linux-mm/CAPHJ_VKuMKSke8b11AZQw1PTSFN4n2C0gFxC6xGOG0ZLHgPmnA@mail.gmail.com [1]
Cc: stable@vger.kernel.org
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260309072219.22653-1-harry.yoo@oracle.com
Tested-by: Zw Tang <shicenci@gmail.com>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Hotplugging a CPU off and back on fails with pKVM, as we try to
probe for ICH_VTR_EL2.TDS. In a non-VHE setup, this is achieved
by using an EL2 stub helper. However, the stubs are out of reach
once pKVM has deprivileged the kernel. The CPU never boots.
Since pKVM doesn't allow late onlining of CPUs, we can detect
that protected mode is enforced early on, and return the current
state of the capability.
Fixes: 2a28810cbb ("KVM: arm64: GICv3: Detect and work around the lack of ICV_DIR_EL1 trapping")
Reported-by: Vincent Donnefort <vdonnefort@google.com>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260310085433.3936742-1-maz@kernel.org
Cc: stable@vger.kernel.org
Add EIP76 Random Number Generator (RNG) node for AM62L SoC. Unlike
other k3 platforms, AM62L RNG is integrated outside crypto subsystem
at address 0x3b100000, requiring an additional entry in cbass_main
memory map.
Mark the RNG node with status "reserved" as it is intended for use by
OP-TEE for secure random number generation. If required, this hardware
can also be used through Linux kernel by enabling this node.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Link: https://patch.msgid.link/20260309101650.1652240-1-s-tripathi1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 22e1d0d8cd ("dt-bindings: arm: ti:
Add Kontron SMARC-sAM67 module").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-5-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit a598ae45f4 ("dt-bindings: mfd:
sl28cpld: Add sa67mcu compatible").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-4-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-2-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721S2 EVM has MT25QU512AB 64 MiB Quad SPI NOR flash connected
to OSPI1. Add the partition information as per bootloader.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260226091730.2735587-1-a-dutta@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The default impedance for the MAC I/O lines from the DP83867 Ethernet PHY
is 50 Ohm. Based on the board PCB traces, this impedance is relatively
higher than expected, resulting in CRC errors for packets being transmitted
and received. Hence, add the "ti,min-output-impedance" device-tree property
to set the impedance to its lowest possible value of 35 Ohm as described in
the DP83867 Datasheet [0].
[0]: https://www.ti.com/lit/ds/symlink/dp83867e.pdf
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260223105448.1110428-5-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The default impedance for the MAC I/O lines from the DP83867 Ethernet PHY
is 50 Ohm. Based on the board PCB traces, this impedance is relatively
higher than expected, resulting in CRC errors for packets being transmitted
and received. Hence, add the "ti,min-output-impedance" device-tree property
to set the impedance to its lowest possible value of 35 Ohm as described in
the DP83867 Datasheet [0].
[0]: https://www.ti.com/lit/ds/symlink/dp83867e.pdf
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260223105448.1110428-4-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The default impedance for the MAC I/O lines from the DP83867 Ethernet PHY
is 50 Ohm. Based on the board PCB traces, this impedance is relatively
higher than expected, resulting in CRC errors for packets being transmitted
and received. Hence, add the "ti,min-output-impedance" device-tree property
to set the impedance to its lowest possible value of 35 Ohm as described in
the DP83867 Datasheet [0].
[0]: https://www.ti.com/lit/ds/symlink/dp83867e.pdf
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260223105448.1110428-3-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The default impedance for the MAC I/O lines from the DP83867 Ethernet PHY
is 50 Ohm. Based on the board PCB traces, this impedance is relatively
higher than expected, resulting in CRC errors for packets being transmitted
and received. Hence, add the "ti,min-output-impedance" device-tree property
to set the impedance to its lowest possible value of 35 Ohm as described in
the DP83867 Datasheet [0].
[0]: https://www.ti.com/lit/ds/symlink/dp83867e.pdf
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260223105448.1110428-2-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Change the status of the wkup_uart0_target node to enabled. The node sets
the UART SYSS register to allow wakeup from WKUP UART in DeepSleep low
power mode.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://patch.msgid.link/20260219-v6-19-wkup-uart-wakeup-v4-4-eda09dce5623@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
