Describe the 9FGV0841 PCIe and USB3.0 clock generator present on ULCB
boards. The clock generator supplies 100 MHz differential clock for
both PCIe ports, the USB 3.0 PHY and SATA.
SATA is not yet described in the ULCB DT, therefore the connection to
this clock generator is not described here either.
The H3 ULCB schematic does describe connection from output DIF7 to
USB3S1_CLK_*, but these signals do not exist on the SoC, therefore
this connection is also not described.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the 9FGV0841 PCIe and USB3.0 clock generator present on both
Salvator-X and Salvator-XS boards. The clock generator supplies 100 MHz
differential clock for both PCIe ports, as well as for the USB 3.0 PHY.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-8-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add USB 3.0 PHY and PHY clock node for R-Car E3. The PHY node is
different in that it does not have control registers and extal clock,
which are not routed to the SoC pads on R-Car E3, therefore describe the
PHY as usb-nop-xceiv simple PHY. Add USB3S0 clock pad fixed-clock node,
the frequency has to be overridden at board level.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-7-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add node which describes the root port in the PCIe controller DT node.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-6-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260118135038.8033-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In RZ/N1 SoCs, CPUs are allowed to work at 125, 250 or 500 MHz when the
'ref' clock frequency value is set to 500 MHz which is the default 'ref'
clock frequency value.
Add support for CPU frequency scaling defining those 3 frequencies in
the opp-table with the assumption that the 'ref' clock is set to its
default value.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260115164905.1203453-1-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The U-Boot SPL is responsible for initializing the hardware and it does
also initialize HSCIF0 and its pinmux, mark the HSCIF0 pinmux as needed
in all bootloader stages. The SPL also uses OTP to determine the exact
V4H SoC variant during DRAM initialization, to determine which is the
maximum allowed DRAM rate, mark OTP as required in all bootloader stages
as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260112234642.225993-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The default settings for the Versa3 device on the Renesas RZ/G3S SMARC
SoM board have PLL2 disabled. PLL2 was later enabled together with audio
support, as it is required to support both 44.1 kHz and 48 kHz audio.
With PLL2 enabled, it was observed that Linux occasionally either hangs
during boot (the last log message being related to the I2C probe) or
randomly crashes. This was mainly reproducible on cold boots. During
debugging, it was also noticed that the Unicode replacement character (�)
sometimes appears on the serial console. Further investigation traced this
to the configuration applied through the Versa3 register at offset 0x1c,
which controls PLL enablement.
The appearance of the Unicode replacement character suggested an issue
with the SoC reference clock. The RZ/G3S reference clock is provided by
the Versa3 clock generator (REF output).
After checking with the Renesas Versa3 hardware team, it was found that
this is related to the PLL2 lock bit being set through the
renesas,settings DT property.
The PLL lock bit must be set to avoid unstable clock output from the PLL.
However, due to the Versa3 hardware design, when a PLL lock bit is set,
all outputs (including the REF clock) are temporarily disabled until the
configured PLLs become stable.
As an alternative, the bypass bit can be used. This does not interrupt the
PLL2 output or any other Versa3 outputs, but it may result in temporary
instability on PLL2 output while the configuration is applied. Since PLL2
feeds only the audio path and audio is not used during early boot, this is
acceptable and does not affect system boot.
Drop the PLL2 lock bit and set the bypass bit instead.
This has been tested with more than 1000 cold boots.
Fixes: a94253232b ("arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260302135703.162601-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The CPG register regions were incorrectly sized. Update them to match
the actual hardware specification:
- First region (0x80280000): 0x1000 -> 0x10000 (64kiB)
- Second region (0x81280000): 0x9000 -> 0x10000 (64kiB)
Fixes: 4b3d31f0b8 ("arm64: dts: renesas: Add initial SoC DTSI for the RZ/N2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260213131742.3606334-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The CPG register regions were incorrectly sized. Update them to match
the actual hardware specification:
- First region (0x80280000): 0x1000 -> 0x10000 (64kiB)
- Second region (0x81280000): 0x9000 -> 0x10000 (64kiB)
Fixes: d17b34744f ("arm64: dts: renesas: Add initial support for the Renesas RZ/T2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260213131742.3606334-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The HW user manual for the Renesas RZ/V2H(P) SoC (a.k.a r9a09g057)
states that only WDT1 is supposed to be accessed by the CA55 cores.
WDT0 is supposed to be used by the CM33 core, WDT2 is supposed
to be used by the CR8 core 0, and WDT3 is supposed to be used
by the CR8 core 1.
Remove wdt{0,2,3} from the SoC specific device tree to make it
compliant with the specification from the HW manual.
This change is harmless as there are currently no users of the
wdt{0,2,3} device tree nodes, only the wdt1 node is actually used.
Fixes: 095105496e ("arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260203124247.7320-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Set an appropriate ramp delay for the SD0 I/O voltage regulator in the
CN15 SD overlay to make UHS-I voltage switching reliable during card
initialization.
This issue was observed on the RZ/V2H EVK, while the same UHS-I cards
worked on the RZ/V2N EVK without problems. Adding the ramp delay makes
the behavior consistent and avoids SD init timeouts.
Before this change SD0 could fail with:
mmc0: error -110 whilst initialising SD card
With the delay in place UHS-I cards enumerate correctly:
mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SR64G 59.5 GiB
mmcblk0: p1
Fixes: 3d6c2bc762 ("arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a ramp delay of 60 uV/us to the vqmmc_sdhi0 voltage regulator to
fix UHS-I SD card detection failures.
Measurements on CN78 pin 4 showed the actual voltage ramp time to be
21.86ms when switching between 3.3V and 1.8V. A 25ms ramp delay has
been configured to provide adequate margin. The calculation is based
on the voltage delta of 1.5V (3.3V - 1.8V):
1500000 uV / 60 uV/us = 25000 us (25ms)
Prior to this patch, UHS-I cards failed to initialize with:
mmc0: error -110 whilst initialising SD card
After this patch, UHS-I cards are properly detected on SD0:
mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SR64G 59.5 GiB
Fixes: d065453e5e ("arm64: dts: renesas: rzt2h-rzn2h-evk: Enable SD card slot")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some QCS8300 interconnect nodes have QoS registers located inside
a block whose interface is clock-gated. For those nodes, driver
must enable the corresponding clock(s) before accessing the
registers. Add the 'clocks' property so the driver can obtain
and enable the required clock(s).
Only interconnects that have clock‑gated QoS register interface
use this property; it is not applicable to all interconnect nodes.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://msgid.link/20260127090116.1438780-2-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Mahua is a derivative of the Glymur SoC. Extend the
Glymur driver to support Mahua by:
1. Adding new node definitions for interconnects that differ from Glymur
(Config NoC, High-Speed Coherent NoC, PCIe West ANOC/Slave NoC).
2. Reusing existing Glymur definitions for identical NoCs.
3. Overriding the channel and buswidth, with Mahua specific values for
the differing NoCs
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://msgid.link/20260209-mahua_icc-v3-2-c65f3dfd72c8@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Document the RPMh Network-on-Chip (NoC) interconnect for the Qualcomm
Mahua platform.
Mahua is a derivative of the Glymur SoC. Many interconnect nodes are
identical and continue to use Glymur fallback compatibles. Mahua
introduces SoC-specific configurations and topologies for several
NoC blocks, including CNOC, HSCNOC, PCIe West ANoC/Slave NoCs.
This updates the existing Glymur yaml schema to include Mahua-specific
compatible strings, using two-cell "fallback" compatibles wherever
the hardware is identical with Glymur.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://msgid.link/20260209-mahua_icc-v3-1-c65f3dfd72c8@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d ("kselftest/arm64: Add SVE 2.1 to hwcap test")
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14809
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260224094944.2447913-2-janusz.krzysztofik@linux.intel.com
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260305160712.1263829-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some scenarios, a deadlock can happen, involving _do_shadow_pte().
Convert all usages of pgste_get_lock() to pgste_get_trylock() in
_do_shadow_pte() and return -EAGAIN. All callers can already deal with
-EAGAIN being returned.
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range.
Fixes: 4602e5757b ("arm64/mm: wire up PTE_CONT for user mappings")
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available.
Fixes: 98b995660b ("ublk: Add UBLK_U_CMD_UPDATE_SIZE")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This maintainer's email is now bouncing. Since Mika maintains the core
Thunderbolt/USB4 driver he can take over this one too.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
[mw: Put me as maintainer instead of orphaning it]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We already have an ISB in __kvm_at() to make the address translation result
visible to subsequent reads of PAR_EL1. Remove the redundant one right
after it.
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260306074422.47694-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
When user_mem_abort() handles a nested stage-2 fault, it truncates
vma_pagesize to respect the guest's mapping size. However, the local
variable vma_shift is never updated to match this new size.
If the underlying host page turns out to be hardware poisoned,
kvm_send_hwpoison_signal() is called with the original, larger
vma_shift instead of the actual mapping size. This signals incorrect
poison boundaries to userspace and breaks hugepage memory poison
containment for nested VMs.
Update vma_shift to match the truncated vma_pagesize when operating
on behalf of a nested hypervisor.
Fixes: fd276e71d1 ("KVM: arm64: nv: Handle shadow stage 2 page faults")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260304162222.836152-3-tabba@google.com
[maz: simplified vma_shift assignment from the original patch]
Signed-off-by: Marc Zyngier <maz@kernel.org>
The comment for tag_to_ret_ctr in ibs_op_data says "15-31"
but it should be "16-31".
Fix the misleading comment. No functional changes.
Signed-off-by: Yen-Hsiang Hsu <rrrrr4413@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260113141830.3204114-1-rrrrr4413@gmail.com
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS
is used. Increase the mapping to 64 MB in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Inactive times of around 0xffffffff milliseconds have been observed on
an ath9k device on ARM. This is likely due to a memory ordering race in
the jiffies_to_msecs(jiffies - last_active()) calculation causing an
overflow when the observed jiffies is below ieee80211_sta_last_active().
Use jiffies_delta_to_msecs() instead to avoid this problem.
Fixes: 7bbdd2d987 ("mac80211: implement station stats retrieval")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260303161701.31808-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't remove keys before disable beaconing, at least when
beacon protection is used, since that would remove keys that are
still used for beacon transmission at the same time. Stop before
removing keys so there's no race.
Fixes: af2d14b01c ("mac80211: Beacon protection using the new BIGTK (STA)")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150339.574e7887b3ab.I50d708f5aa22584506a91d0da7f8a73ba39fceac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260306085144.12064-10-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260306085144.12064-16-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260306085144.12064-9-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260306085144.12064-8-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
