.. with the brand spanking new topology_num_nodes_per_package().
Having the topology setup determine this value during MADT/SRAT parsing before
SMP bringup avoids having to detect this situation when building the SMP
topology masks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://patch.msgid.link/20260303110100.123701837@infradead.org
Use the MADT and SRAT table data to compute __num_nodes_per_package.
Specifically, SRAT has already been parsed in x86_numa_init(), which is called
before acpi_boot_init() which parses MADT. So both are available in
topology_init_possible_cpus().
This number is useful to divinate the various Intel CoD/SNC and AMD NPS modes,
since the platforms are failing to provide this otherwise.
Doing it this way is independent of the number of online CPUs and
other such shenanigans.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://patch.msgid.link/20260303110100.004091624@infradead.org
The topology setup code needs to know the total number of physical
nodes enumerated in SRAT; however NUMA_EMU can cause the existing
numa_nodes_parsed bitmap to be fictitious. Therefore, keep a copy of
the bitmap specifically to retain the physical node count.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://patch.msgid.link/20260303110059.889884023@infradead.org
Now that the Realtek PCIe SDMMC host implements the card_busy() callback,
the MMC core performs the required DAT[3:0] validation during the signal
voltage switch sequence.
As a result, the driver-side voltage stabilization helpers
sd_wait_voltage_stable_1() and sd_wait_voltage_stable_2() become redundant.
These helpers duplicate DAT line checks that are now handled centrally by
the MMC core via card_busy().
Remove the two stabilization helpers and simplify sdmmc_switch_voltage()
accordingly, keeping only the minimal clock control needed around the
voltage switch.
No functional changes and intended.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To pick the changes in:
f7ab71f178 ("KVM: s390: Add explicit padding to struct kvm_s390_keyop")
0ee4ddc164 ("KVM: s390: Storage key manipulation IOCTL")
fa9893fadb ("KVM: Introduce KVM_EXIT_SNP_REQ_CERTS for SNP certificate-fetching")
f174a9ffcd ("KVM: arm64: Add exit to userspace on {LD,ST}64B* outside of memslots")
That just rebuilds perf, as these patches add just one new KVM ioctl,
but for S390, that is not being considered by tools/perf/trace/beauty/kvm_ioctl.sh
so far.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
f3ec502b67 ("mm/slab: mark alloc tags empty for sheaves allocated with __GFP_NO_OBJ_EXT")
241b3a0963 ("mm: clarify GFP_ATOMIC/GFP_NOWAIT doc-comment")
That just adds some comments, so no changes in perf tooling, just silences
this build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/gfp_types.h include/linux/gfp_types.h
Please see tools/include/uapi/README.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the current implementation, the auto-analysis code for printing the
stack captured in the tracefs buffer of the aa instance stops at the
first encountered address that cannot be resolved into a function
symbol.
This is not always the desired behavior on all platforms; sometimes,
there might be resolvable entries after unresolvable ones, and
sometimes, the user might want to inspect the raw pointers for the
unresolvable entries.
Add a new option, --stack-format, with three values:
- truncate: stop at first unresolvable entry. This is the current
behavior, and is kept as the default.
- skip: skip unresolvable entries, but do not stop on them.
- full: print all entries, including unresolvable ones.
To make this work, the "size" field of the stack entry is now also read
and used as the maximum number of entries to print, capped at 64, since
that is the fixed length of the "caller" field.
Link: https://lore.kernel.org/r/20260119115222.744150-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add unit tests for utility functions in src/utils.c using the Check
testing framework. The tests verify parse_cpu_set(), strtoi(), and
parse_prio() functions.
Unit tests are built conditionally when libcheck is available.
Run tests with 'make unit-test'.
The test framework uses the Check library which provides process
isolation for each test, preventing failures in one test from
affecting others.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20260119105857.797498-3-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Update it as one comment got realigned, probably in a merge, so no
changes in perf tooling, just silences this build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the change in:
a1fab3e69d ("x86/irq: Fix comment on IRQ vector layout")
That just adds one comment, so no changes in perf tooling, just silences
this build warning:
diff -u tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h arch/x86/include/asm/irq_vectors.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up changes from:
0e6b7eae1f ("fs: add FS_XFLAG_VERITY for fs-verity files")
These are used to beautify fs syscall arguments, albeit the changes in
this update are not affecting those beautifiers.
This addresses these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README.
Cc: Andrey Albershteyn <aalbersh@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
9b8a0ba682 ("mount: add OPEN_TREE_NAMESPACE")
0e5032237e ("statmount: accept fd as a parameter")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Bhavik Sachdev <b.sachdev1904@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently no target is specified to compile rust code when needed, which
breaks cross compilation. E.g. for arm64:
LD /tmp/build/tests/workloads/perf-test-in.o
aarch64-linux-gnu-ld: /tmp/build/tests/workloads/code_with_type.a(code_with_type.code_with_type.d12f4324cb53c560-cgu.0.rcgu.o): Relocations in generic ELF (EM: 62)
aarch64-linux-gnu-ld: /tmp/build/tests/workloads/code_with_type.a(code_with_type.code_with_type.d12f4324cb53c560-cgu.0.rcgu.o): Relocations in generic ELF (EM: 62)
[...repeated...]
aarch64-linux-gnu-ld: /tmp/build/tests/workloads/code_with_type.a(code_with_type.code_with_type.d12f4324cb53c560-cgu.0.rcgu.o): Relocations in generic ELF (EM: 62)
aarch64-linux-gnu-ld: /tmp/build/tests/workloads/code_with_type.a(code_with_type.code_with_type.d12f4324cb53c560-cgu.0.rcgu.o): Relocations in generic ELF (EM: 62)
aarch64-linux-gnu-ld: /tmp/build/tests/workloads/code_with_type.a: error adding symbols: file in wrong format
make[5]: *** [/perf/tools/build/Makefile.build:162: /tmp/build/tests/workloads/perf-test-in.o] Error 1
make[4]: *** [/perf/tools/build/Makefile.build:156: workloads] Error 2
make[3]: *** [/perf/tools/build/Makefile.build:156: tests] Error 2
make[2]: *** [Makefile.perf:785: /tmp/build/perf-test-in.o] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:289: sub-make] Error 2
make: *** [Makefile:76: all] Error 2
Detect required target and pass it via rust_flags to the compiler.
Note that CROSS_COMPILE might be different from what rust compiler
expects, since it may omit the target vendor value, e.g.
"aarch64-linux-gnu" instead of "aarch64-unknown-linux-gnu".
Thus explicitly map supported CROSS_COMPILE values to corresponding Rust
versions, as suggested by Miguel Ojeda.
Tested using arm64 cross-compilation example from [1].
Fixes: 2e05bb52a1 ("perf test workload: Add code_with_type test workload")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Levi Zim <i@kxxt.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nsc@kernel.org>
Link: https://perfwiki.github.io/main/arm64-cross-compilation-dockerfile/ [1]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 143937ca51 ("arm64, mm: avoid always making PTE dirty in
pte_mkwrite()") changed pte_mkwrite_novma() to only clear PTE_RDONLY
when PTE_DIRTY is set. This was to allow writable-clean PTEs for swap
pages that haven't actually been written.
However, this broke kexec and hibernation for some platforms. Both go
through trans_pgd_create_copy() -> _copy_pte(), which calls
pte_mkwrite_novma() to make the temporary linear-map copy fully
writable. With the updated pte_mkwrite_novma(), read-only kernel pages
(without PTE_DIRTY) remain read-only in the temporary mapping.
While such behaviour is fine for user pages where hardware DBM or
trapping will make them writeable, subsequent in-kernel writes by the
kexec relocation code will fault.
Add PTE_DIRTY back to all _PAGE_KERNEL* protection definitions. This was
the case prior to 5.4, commit aa57157be6 ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default"). With the kernel
linear-map PTEs always having PTE_DIRTY set, pte_mkwrite_novma()
correctly clears PTE_RDONLY.
Fixes: 143937ca51 ("arm64, mm: avoid always making PTE dirty in pte_mkwrite()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Link: https://lore.kernel.org/r/20251204062722.3367201-1-jianpeng.chang.cn@windriver.com
Cc: Will Deacon <will@kernel.org>
Cc: Huang, Ying <ying.huang@linux.alibaba.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
When the backend domain crashes, coordinated device cleanup is not
possible (as it involves waiting for the backend state change). In that
case, toolstack forcefully removes frontend xenstore entries.
xenbus_dev_changed() handles this case, and triggers device cleanup.
It's possible that toolstack manages to connect new device in that
place, before xenbus_dev_changed() notices the old one is missing. If
that happens, new one won't be probed and will forever remain in
XenbusStateInitialising.
Fix this by checking the frontend's state in Xenstore. In case it has
been reset to XenbusStateInitialising by Xen tools, consider this
being the result of an unplug+plug operation.
It's important that cleanup on such unplug doesn't modify Xenstore
entries (especially the "state" key) as it belong to the new device
to be probed - changing it would derail establishing connection to the
new backend (most likely, closing the device before it was even
connected). Handle this case by setting new xenbus_device->vanished
flag to true, and check it before changing state entry.
And even if xenbus_dev_changed() correctly detects the device was
forcefully removed, the cleanup handling is still racy. Since this whole
handling doesn't happened in a single Xenstore transaction, it's possible
that toolstack might put a new device there already. Avoid re-creating
the state key (which in the case of loosing the race would actually
close newly attached device).
The problem does not apply to frontend domain crash, as this case
involves coordinated cleanup.
Problem originally reported at
https://lore.kernel.org/xen-devel/aOZvivyZ9YhVWDLN@mail-itl/T/#t,
including reproduction steps.
Based-on-patch-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260218095205.453657-3-jgross@suse.com>
In order to prepare checking the xenbus device status in
xenbus_read_driver_state(), add the pointer to struct xenbus_device
as a parameter.
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> # SCSI
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/xen-pcifront.c
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260218095205.453657-2-jgross@suse.com>
The arm64 xchg/cmpxchg() wrappers cast the arguments to (unsigned long)
prior to invoking the static inline functions implementing the
operation. Some restrictive type annotations (e.g. __bitwise) lead to
sparse warnings like below:
sparse warnings: (new ones prefixed by >>)
fs/crypto/bio.c:67:17: sparse: sparse: cast from restricted blk_status_t
>> fs/crypto/bio.c:67:17: sparse: sparse: cast to restricted blk_status_t
Force the casting in the arm64 xchg/cmpxchg() wrappers to silence
sparse.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602230947.uNRsPyBn-lkp@intel.com/
Link: https://lore.kernel.org/r/202602230947.uNRsPyBn-lkp@intel.com/
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
Due to a recent change, building perf may result in a build error when
it is trying to "prune orphans".
The file list passed to "rm" may exceed what the shell can handle.
The build will then abort with an error like this:
TEST [...]/arm64/build/linux-custom/tools/perf/pmu-events/metric_test.log
make[5]: /bin/sh: Argument list too long
make[5]: *** [pmu-events/Build:217: prune_orphans] Error 127
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [Makefile.perf:773: [...]/tools/perf/pmu-events/pmu-events-in.o] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [Makefile.perf:289: sub-make] Error 2
Processing the arguments via "xargs", instead of passing the list of
files directly to "rm" via the shell, prevents this issue.
Fixes: 36a1b0061a ("perf build: Reduce pmu-events related copying and mkdirs")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The command length of in-target scales with the depth of the directory
times the number of objects in the Makefile.
When there are many objects, and O=[absolute_path] is set, and the
absolute_path is relatively long.
It is possible that this line "$(call if_changed,$(host)ld_multi)" will
report error: "make[4]: /bin/sh: Argument list too long"
For example, build perf tools with O=/long/output/path
Like built-in.a and *.mod rules in scripts/Makefile.build, add
$(objpredix)/ by the shell command instead of by Make's builtin
function.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the bio is allocated with the exact number of pages needed via
blk_rq_map_bio_alloc(), and the loop iterates exactly that many times,
bio_add_page() cannot fail due to insufficient space. Switch to
__bio_add_page() and remove the dead error handling code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When check_bo_args_are_sane() validation fails, jump to the new
free_vmas cleanup label to properly free the allocated resources.
This ensures proper cleanup in this error path.
Fixes: 293032eec4 ("drm/xe/bo: Update atomic_access attribute on madvise")
Cc: stable@vger.kernel.org # v6.18+
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260223175145.1532801-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 29bd06faf7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Free the newly allocated entry when xa_store() fails to avoid a memory
leak on the error path.
v2: use goto fail_free. (Bala)
Fixes: e5283bd4df ("drm/xe/reg_sr: Remove register pool")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260204172810.1486719-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6bc6fec71a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Wa_16025250150 asks us to set five register fields of the register to
0x1 each. However we were just OR'ing this into the existing register
value (which has a default of 0x4 for each nibble-sized field) resulting
in final field values of 0x5 instead of the desired 0x1. Correct the
RTP programming (use FIELD_SET instead of SET) to ensure each field is
assigned to exactly the value we want.
Cc: Aradhya Bhatia <aradhya.bhatia@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Fixes: 7654d51f1f ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Ngai-Mint Kwan <ngai-mint.kwan@linux.intel.com>
Link: https://patch.msgid.link/20260227164341.3600098-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d139209ef8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_gsc_proxy_remove undoes what is done in both xe_gsc_proxy_init and
xe_gsc_proxy_start; however, if we fail between those 2 calls, it is
possible that the HW forcewake access hasn't been initialized yet and so
we hit errors when the cleanup code tries to write GSC register. To
avoid that, split the cleanup in 2 functions so that the HW cleanup is
only called if the HW setup was completed successfully.
Since the HW cleanup (interrupt disabling) is now removed from
xe_gsc_proxy_remove, the cleanup on error paths in xe_gsc_proxy_start
must be updated to disable interrupts before returning.
Fixes: ff6cd29b69 ("drm/xe: Cleanup unwind of gt initialization")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260220225308.101469-1-zhanjun.dong@intel.com
(cherry picked from commit 2b37c401b2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With commit
a69d1ab971 ("mm: Fix a hmm_range_fault() livelock / starvation problem")
device-to-device migration is not functional again and the
disabling can be reverted.
Add the above commit as a Fixes: tag in order for the revert to not
take place unless that commit is present.
This reverts commit 10dd1eaa80.
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: b570f37a2c ("mm: Fix a hmm_range_fault() livelock / starvation problem")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260211104159.114947-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1a3c0049b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo updated Fixes tag]
Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE
before enabling TRANS_DDI_FUNC_CTL.
Personally I was only able to reproduce a hang (on an Dell XPS 7390
2-in-1) with an external display connected via a dock using a dodgy
type-C cable that made the link training fail. After the failed
link training the machine would hang. TGL seemed immune to the
problem for whatever reason.
BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL
as well. The DMC firmware also does the VRR restore in two stages:
- first stage seems to be unconditional and includes TRANS_VRR_CTL
and a few other VRR registers, among other things
- second stage is conditional on the DDI being enabled,
and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE,
among other things
So let's reorder the steps to match to avoid the hang, and
toss in an extra WARN to make sure we don't screw this up later.
BSpec: 22243
Cc: stable@vger.kernel.org
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15777
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Fixes: dda7dcd9da ("drm/i915/vrr: Use fixed timings for platforms that support VRR")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260303095414.4331-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Filesystems should never provide a delayed allocation mapping to
writeback; they're supposed to allocate the space before replying.
This can lead to weird IO errors and crashes in the block layer if the
filesystem is being malicious, or if it hadn't set iomap->dev because
it's a delalloc mapping.
Fix this by failing writeback on delalloc mappings. Currently no
filesystems actually misbehave in this manner, but we ought to be
stricter about things like that.
Cc: stable@vger.kernel.org # v5.5
Fixes: 598ecfbaa7 ("iomap: lift the xfs writeback code to iomap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260302173002.GL13829@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Refill queue entries are shared with the user space, use READ_ONCE when
reading them.
Fixes: 34a3e60821 ("io_uring/zcrx: implement zerocopy receive pp memory provider");
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DP specification is saying value 0xff 0xff in PANEL REPLAY SELECTIVE UPDATE
X GRANULARITY CAPABILITY registers (0xb2 and 0xb3) means full-line
granularity. Take this into account when handling Panel Replay X
granularity informed by the panel.
Fixes: 1cc8546474 ("drm/i915/psr: Use SU granularity information available in intel_connector")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7284
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260225074221.1744330-2-jouni.hogander@intel.com
(cherry picked from commit f5c8f824a4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joanne Koong <joannelkoong@gmail.com> says:
This is a fix for this scenario:
->read_folio() gets called on a folio size that is 16k while the file is 4k:
a) ifs->read_bytes_pending gets initialized to 16k
b) ->read_folio_range() is called for the 4k read
c) the 4k read succeeds, ifs->read_bytes_pending is now 12k and the
0 to 4k range is marked uptodate
d) the post-eof blocks are zeroed and marked uptodate in the call to
iomap_set_range_uptodate()
e) iomap_set_range_uptodate() sees all the ranges are marked
uptodate and it marks the folio uptodate
f) iomap_read_end() gets called to subtract the 12k from
ifs->read_bytes_pending. it too sees all the ranges are marked
uptodate and marks the folio uptodate using XOR
g) the XOR call clears the uptodate flag on the folio
The same situation can occur if the last range read for the folio is done as
an inline read and all the previous ranges have already completed by the time
the inline read completes.
For more context, the full discussion can be found in [1]. There was a
discussion about alternative approaches in that thread, but they had more
complications.
There is another discussion in v1 [2] about consolidating the read paths.
Until that is resolved, this patch fixes the issue.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1Z9za5w4FoJqTGx50zR2haHHaoot1KJViQyEHJQq4=34w@mail.gmail.com/#t
[2] https://lore.kernel.org/linux-fsdevel/20260219003911.344478-1-joannelkoong@gmail.com/T/#u
* patches from https://patch.msgid.link/20260303233420.874231-1-joannelkoong@gmail.com:
iomap: don't mark folio uptodate if read IO has bytes pending
Link: https://patch.msgid.link/20260303233420.874231-1-joannelkoong@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a folio has ifs metadata attached to it and the folio is partially
read in through an async IO helper with the rest of it then being read
in through post-EOF zeroing or as inline data, and the helper
successfully finishes the read first, then post-EOF zeroing / reading
inline will mark the folio as uptodate in iomap_set_range_uptodate().
This is a problem because when the read completion path later calls
iomap_read_end(), it will call folio_end_read(), which sets the uptodate
bit using XOR semantics. Calling folio_end_read() on a folio that was
already marked uptodate clears the uptodate bit.
Fix this by not marking the folio as uptodate if the read IO has bytes
pending. The folio uptodate state will be set in the read completion
path through iomap_end_read() -> folio_end_read().
Reported-by: Wei Gao <wegao@suse.com>
Suggested-by: Sasha Levin <sashal@kernel.org>
Tested-by: Wei Gao <wegao@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.19
Link: https://lore.kernel.org/linux-fsdevel/aYbmy8JdgXwsGaPP@autotest-wegao.qe.prg2.suse.org/
Fixes: b2f35ac414 ("iomap: add caller-provided callbacks for read and readahead")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260303233420.874231-2-joannelkoong@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 2dc164a48e ("sysctl: Create converter functions with two new
macros") incorrectly returns error to user space when jiffies sysctl
converter is used. The old overflow check got replaced with an
unconditional one:
+ if (USER_HZ < HZ)
+ return -EINVAL;
which will always be true on configurations with "USER_HZ < HZ".
Remove the check; it is no longer needed as clock_t_to_jiffies() returns
ULONG_MAX for the overflow case and proc_int_u2k_conv_uop() checks for
"> INT_MAX" after conversion
Fixes: 2dc164a48e ("sysctl: Create converter functions with two new macros")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Port the essential hardware initialization logic from the vendor driver
and introduce the standard HDA fixup framework to handle different
machine configurations.
Key changes:
1. Add hardware init verbs:
- Implement `senary_init_verb` to send the vendor-specific
initialization sequence required by the SN6186 chip.
- Override pin capabilities for Node 0x19 to ensure proper headset
microphone support.
2. Introduce fixup framework:
- Define a default pin configuration table (`senary_pincfg_default`)
to provide a fallback for devices with invalid BIOS configurations.
- Establish a quirk table structure for future machine-specific
fixes.
- Since the standard quirk matching relies on Subsystem IDs, we
manually apply the default fixup if `snd_hda_pick_fixup` does not
find a specific match.
This ensures the chip is correctly initialized during probe and resume,
and provides a scalable mechanism for supporting specific hardware
quirks.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260304070219.450083-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MV-SILICON is a SoC manufacturer producing multifunctional audio SoCs.
Many devices built on top of their SDK share a common quirk that the
Playback and Capture mixers use linear volume with val = 0/4096/1.
The SDK seems to always report "MV-SILICON" for manufacturer string.
Hence, match it so that we don't need to define quirk table entries
separately for each devices. The "val = 0/4096/1" pattern is also
checked against before applying the quirk, in order that the quirk won't
accidentally break unseen variants.
Quirky device samples:
usb 7-1: New USB device found, idVendor=1235, idProduct=0003, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: G1
usb 7-1: Manufacturer: MV-SILICON
usb 7-1: SerialNumber: 20190808
usb 7-1: New USB device found, idVendor=1235, idProduct=0003, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: mvsilicon B1 usb audio
usb 7-1: Manufacturer: MV-SILICON
usb 7-1: SerialNumber: 20190808
usb 5-1.4: New USB device found, idVendor=8888, idProduct=1719, bcdDevice= 1.00
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.4: Product: HF310 USB Audio
usb 5-1.4: Manufacturer: MV-SILICON
usb 5-1.4: SerialNumber: 20190808
usb 7-1: New USB device found, idVendor=2717, idProduct=5086, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: Redmi 电脑音箱
usb 7-1: Manufacturer: MV-SILICON
usb 7-1: SerialNumber: 20190808
usb 2-1.2: New USB device found, idVendor=3142, idProduct=a601, bcdDevice= 1.00
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: fifine Microphone
usb 2-1.2: Manufacturer: MV-SILICON
usb 2-1.2: SerialNumber: 20190808
* https://forum.ubuntu-it.org/viewtopic.php?t=659345
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-9-i@rong.moe
Hotone Audio Pulze Mini is a modeling amplifier with UAC interface. Its
Playback and Capture mixers use linear volume with val = 0/100/1.
Add a quirk table entry matching VID/PID=0x84ef/0x0082 and applying
linear volume quirk flags, so that it can work properly.
Quirky device sample:
usb 7-1: New USB device found, idVendor=84ef, idProduct=0082, bcdDevice= 1.03
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: Pulze Mini
usb 7-1: Manufacturer: Hotone Audio
usb 7-1: SerialNumber: 20240807
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-8-i@rong.moe
Some quirky devices tune their volume by linearly tuning the voltage
level (linear volume). In other words, such devices has a linear TLV
mapping of DECLARE_TLV_DB_LINEAR(scale, TLV_DB_GAIN_MUTE, 0).
Add quirk flags MIXER_PLAYBACK_LINEAR_VOL and MIXER_CAPTURE_LINEAR_VOL
to represent this case respectively for playback and capture mixers.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-7-i@rong.moe
MV-SILICON is a SoC manufacturer producing multifunctional audio SoCs.
Many budget-oriented OEM devices are built on top of them. However, some
of them are just too budget-constrained that their manufacturers didn't
even have a USB VID and simply picked a random VID.
Some OEMs unfortunately picked the VID of Focusrite Novation (0x1235),
resulting in VID conflicts as we had defined a VENDOR_FLG() for the
latter.
Add a VENDOR_STRING_FLG() for MV-SILICON to stop the matching procedure
for these quirky devices, so that quirk flags for Focusrite Novation
won't be accidentally applied on them.
Quirky device samples:
usb 7-1: New USB device found, idVendor=1235, idProduct=0003, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: G1
usb 7-1: Manufacturer: MV-SILICON
usb 7-1: SerialNumber: 20190808
usb 7-1: New USB device found, idVendor=1235, idProduct=0003, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: mvsilicon B1 usb audio
usb 7-1: Manufacturer: MV-SILICON
usb 7-1: SerialNumber: 20190808
usb 1-1.2: New USB device found, idVendor=1235, idProduct=0002, bcdDevice= 1.00
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
usb 1-1.2: Product: V8
usb 1-1.2: Manufacturer: MV-SILICON
usb 1-1.2: SerialNumber: ...
* https://github.com/linuxhw/Dmesg/blob/main/Desktop/Others/Intel/Intel%20X79/96ED1CC44499/LINUXMINT-19.3/5.0.0-32-GENERIC/X86_64/5BE1E4C74C#L1122
usb 2-1.6: New USB device found, idVendor=1235, idProduct=0002, bcdDevice= 1.00
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=...
usb 2-1.6: Product: V9
usb 2-1.6: Manufacturer: MV-SILICON
usb 2-1.6: SerialNumber: ...
* https://github.com/linuxhw/Dmesg/blob/main/Desktop/Hewlett-Packard/ProLiant/ProLiant%20ML110%20G6/79B1D707316A/KUBUNTU-21.04/5.11.0-33-GENERIC/X86_64/A43F59C4AB#L1009
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-6-i@rong.moe
Some quirky devices do not have a unique VID/PID. Matching them using
DEVICE_FLG() or VENDOR_FLG() may result in conflicts.
Add two new macros DEVICE_STRING_FLG() and VENDOR_STRING_FLG() to match
USB string descriptors (manufacturer and/or product) in addition to VID
and/or PID, so that we can deconflict these devices safely.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-5-i@rong.moe
Currently the volume range check is only meant to discover quirky
microphone on webcam devices and facing these issues:
- The check is only meaningful for dB volume, but it doesn't check if
the TLV callback is the corresponding one
- A common quirky pattern "val = 0/100/1" doesn't trigger any warning
- Some modern devices trigger the check, but they are legit
- The warning message doesn't apply to some quirky messages with linear
volume
- The term "range" in the warning message is confusing. At readers'
first glance it should be (max - min), but it turns out to be
((max - min) / res)
Solve these issues by improving the checking logic to:
- Ignore mixers with non-dB TLV
- Warn on unlikely small volume ranges (max - min < 256)
- Add some heuristics to determine if the volume range is unlikely big
- Rephrase the warning message to mention linear volume
- Rephrase the warning message in correct wording
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-4-i@rong.moe
When a potentially insane volume range is found, the volume control
parameters will be printed in WARN level instead of DEBUG level.
Currently, it's done by emitting a open-coded usb_audio_warn() in the
corresponding check.
The following changes are about to add more checks against volumen
ranges. As the first step, extract the current check logic into a helper
function to improve readability.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-3-i@rong.moe
UAC uses 2 bytes to store volume values, so the maximum volume range is
0xFFFF (65535, val = -32768/32767/1).
The reverted commit bumpped the range of triggering the warning to >
65535, effectively making the range check a no-op. It didn't fix
anything but covered any potential problems and deviated from the
original intention of the range check.
This reverts commit 6b971191fc.
Fixes: 6b971191fc ("ALSA: usb: Increase volume range that triggers a warning")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Arun Raghavan <arunr@valvesoftware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-2-i@rong.moe
