iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The handler for the IRQ part of this driver is mpu3050->trig but,
in the teardown free_irq() is called with handler mpu3050.
Use correct IRQ handler when calling free_irq().
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace
writes the buffer sampling frequency sysfs attribute, calls
st_lsm6dsx_check_odr(), which accesses the odr_table array at index
`sensor->id`; since this array is only 2 entries long, an access for any
sensor type other than accelerometer or gyroscope is an out-of-bounds
access.
The motivation for being able to set a buffer frequency different from the
sensor sampling frequency is to support use cases that need accurate event
detection (which requires a high sampling frequency) while retrieving
sensor data at low frequency. Since all the supported event types are
generated from acceleration data only, do not create the buffer sampling
frequency attribute for sensor types other than the accelerometer.
Fixes: 6b648a36c2 ("iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_lsm6dsx_set_fifo_odr() function, which is called when enabling and
disabling the hardware FIFO, checks the contents of the hw->settings->batch
array at index sensor->id, and then sets the current ODR value in sensor
registers that depend on whether the register address is set in the above
array element. This logic is valid for internal sensors only, i.e. the
accelerometer and gyroscope; however, since commit c91c1c844e ("iio: imu:
st_lsm6dsx: add i2c embedded controller support"), this function is called
also when configuring the hardware FIFO for external sensors (i.e. sensors
accessed through the sensor hub functionality), which can result in
unrelated device registers being written.
Add a check to the beginning of st_lsm6dsx_set_fifo_odr() so that it does
not touch any registers unless it is called for internal sensors.
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The mcp47feb02_parse_fw() function uses data->lock, but the mutex was
initialized after this function in probe path.
Since mcp47feb02_parse_fw() is only called from probe(), remove the lock.
Fixes: bf394cc803 ("iio: dac: adding support for Microchip MCP47FEB02")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The else branch of ade9000_iio_push_streaming() incorrectly returns
IRQ_HANDLED on regmap_write failure. This function returns int (0 on
success, negative errno on failure), so IRQ_HANDLED (1) would be
misinterpreted as a non-error by callers.
Return ret instead, consistent with every other error path in the
function.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The switch statement in ade9000_write_raw() attempts to match
chan->address against ADE9000_REG_AWATTOS (0x00F) to dispatch
the calibration offset write for active power channels. However,
chan->address is set via ADE9000_ADDR_ADJUST(ADE9000_REG_AWATT,
num), so after masking the phase bits, tmp holds
ADE9000_REG_AWATT (0x210), which never matches 0x00F.
As a result, writing IIO_CHAN_INFO_CALIBBIAS for IIO_POWER always
falls through to the default case and returns -EINVAL, making
active power offset calibration silently broken.
Fix this by matching against ADE9000_REG_AWATT instead, which is
the actual base address stored in chan->address for watt channels.
Reference:ADE9000 datasheet (Rev. B), AWATTOS is the offset correction
register at 0x00F (p. 44), while AWATT is the total active power
register at 0x210 (p. 48).
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
FIELD_PREP(BIT(0), fifo_samples & BIT(8)) produces either 0 or 256,
and since FIELD_PREP masks to bit 0, 256 & 1 evaluates to 0. Use !!
to convert the result to a proper 0-or-1 value.
Fixes: df36de1367 ("iio: accel: add ADXL380 driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move devm_mutex_init() before ade9000_request_irq() calls so that
st->lock is initialized before any handler that depends on it can run.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit aef30c8d56 ("genirq: Warn about using IRQF_ONESHOT
without a threaded handler"), the IRQ core checks IRQF_ONESHOT flag
in IRQ request and gives a warning if there is no threaded handler.
Remove IRQF_ONESHOT from devm_request_irq().
Fixes: 47d323ce1e ("iio: pressure: add Honeywell ABP2 driver")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In ads1119_single_conversion(), if pm_runtime_resume_and_get() fails,
the code jumps to the pdown label, which calls
pm_runtime_put_autosuspend().
Since pm_runtime_resume_and_get() automatically decrements the usage
counter on failure, the subsequent call to pm_runtime_put_autosuspend()
causes an unbalanced reference counter.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The presence of a sentinel (an empty {}) at the end of the ctl_table array
now causes a "sysctl table check failed" error because the kernel attempts
to validate the null entry as a functional node.
Deleted the empty {} from the ntfs_sysctls array to prevent
the "procname is null" and "No proc_handler" errors and updated the base
path from "fs" to "fs/ntfs" to ensure the ntfs-debug node is correctly
located under /proc/sys/fs/ntfs/.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fj3P
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()").
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API.
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaaNQggAKCRBFlHeO1qrK
Lo3AAP91+UfLXYTXh2qhAndszSSJi1Xjq2Ik4cIf4UT3Ed2FrQD/QQuppy8k6zFx
tCZGWbmolra9Vnf/oz1OpCaU87JF/Qc=
=ct45
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()")
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n
* tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
clk: scu/imx8qxp: do not register driver in probe()
rust: io: macro_export io_define_read!() and io_define_write!()
device property: Allow secondary lookup in fwnode_get_next_child_node()
The convention for KUnit tests is to have the test kconfig options
visible only when the code they depend on is already enabled. This way
only the tests that are relevant to the particular kernel build can be
enabled, either manually or via KUNIT_ALL_TESTS.
Update lib/crypto/tests/Kconfig to follow that convention, i.e. depend
on the corresponding library options rather than selecting them. This
fixes an issue where enabling KUNIT_ALL_TESTS enabled non-test code.
This does mean that it becomes a bit more difficult to enable *all* the
crypto library tests (which is what I do as a maintainer of the code),
since doing so will now require enabling other options that select the
libraries. Regardless, we should follow the standard KUnit convention.
I'll also add a .kunitconfig file that does enable all these options.
Note: currently most of the crypto library options are selected by
visible options in crypto/Kconfig, which can be used to enable them
without too much trouble. If in the future we end up with more cases
like CRYPTO_LIB_CURVE25519 which is selected only by WIREGUARD (thus
making CRYPTO_LIB_CURVE25519_KUNIT_TEST effectively depend on WIREGUARD
after this commit), we could consider adding a new kconfig option that
enables all the library code specifically for testing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdULzMdxuTVfg8_4jdgzbzjfx-PHkcgbGSthcUx_sHRNMg@mail.gmail.com
Fixes: 4dcf6cadda ("lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256")
Fixes: 571eaeddb6 ("lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512")
Fixes: 6dd4d9f791 ("lib/crypto: tests: Add KUnit tests for Poly1305")
Fixes: 66b1306079 ("lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1")
Fixes: d6b6aac0cd ("lib/crypto: tests: Add KUnit tests for MD5 and HMAC-MD5")
Fixes: afc4e4a5f1 ("lib/crypto: tests: Migrate Curve25519 self-test to KUnit")
Fixes: 6401fd334d ("lib/crypto: tests: Add KUnit tests for BLAKE2b")
Fixes: 15c64c47e4 ("lib/crypto: tests: Add SHA3 kunit tests")
Fixes: b3aed551b3 ("lib/crypto: tests: Add KUnit tests for POLYVAL")
Fixes: ed894faccb ("lib/crypto: tests: Add KUnit tests for ML-DSA verification")
Fixes: 7246fe6cd6 ("lib/crypto: tests: Add KUnit tests for NH")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260226191749.39397-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of using "unsigned short" and "unsigned char" for holding 16-bit
and 8-bit data, switch to using common in kernel u16 and u8.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotating the temporary keymap pointer as __free(kfree) ensures that it
will get released when exiting the function and explicit freeing in all
the return paths can be removed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The SCANCODE() macro extracts a 16-bit value (0..65535) from firmware
device property data, but atkbd_get_keymap_from_fwnode() uses it
directly to index atkbd->keycode[], which only has ATKBD_KEYMAP_SIZE
(512) elements. A firmware-supplied scancode >= 512 causes a heap
out-of-bounds write that can corrupt adjacent struct atkbd fields and
neighboring slab objects.
Add a bounds check that rejects the entire firmware keymap if any entry
contains an out-of-range scancode, consistent with the validation
performed by matrix_keypad_parse_keymap() in drivers/input/matrix-keymap.c
for the same "linux,keymap" property format. When rejected, the driver
falls back to the default keycode table.
Fixes: 9d17ad2369 ("Input: atkbd - receive and use physcode->keycode mapping from FW")
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The following patches made over Linus's current tree allow users to
tell the target layer to perform direct completions instead of always
deferring to LIO's completion workqueue. When the frontend driver
already has multiple worker threads (or you are doing a LUN per target
with a single thread per target) then bypassing the LIO workqueue can
increase performance 20-30%.
Link: https://patch.msgid.link/20260222232946.7637-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has vhost-scsi report that it supports direct completions.
When using a worker task per queue or group of queues with fast backends
then enabling direct completion and submissions increases performance
20-30% with workloads like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=8K \
--ioengine=libaio --iodepth=128 --numjobs=$jobs
As jobs matches and passes the number of vCPUs in the VM then the
benefit increases.
However, when using a single worker then queueing completions and
submissions is best as the worker is busy handling mapping data and
setting/tearing down commands.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-5-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allows userspace to request if we complete in the backend context
or the frontend driver. It works the same as submission where you can
write 0 to 2 to complete_type:
0 - Use the fabric driver's preference.
1 - Complete from the backend calling context if the fabric supports
it.
2 - Queue the completion to LIO's completion workqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has us use the driver's completion preference by default. There is
no behavior changes with this patch and we queue completion to LIO's
completion workqueue by default.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To complete a command several drivers just drop their reference and add
it to list to be processed by a driver specific thread. So there's no
need to go from backend context to the LIO thread then to the driver's
thread. When avoiding the LIO thread, IOPS can increase from 20-30% for
workloads like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=8K \
--ioengine=libaio --iodepth=128 --numjobs=$jobs
where increasing jobs increases the performance improvement (this is
using NVMe drives with LIO's submit_type=1 to directly submit).
Add the infrastructure so drivers and userspace can control how to
complete a command like is done for the submission path. In this commit
there is no behavior change and we continue to defer to the LIO
workqueue thread. In the subsequent commits we will allow drivers to
report what they support and allow userspace to control the behavior.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The WRITE SAME(16) and WRITE SAME(10) SCSI commands use a page from a
dedicated mempool (sd_page_pool) for their payload. This pool was
initialized to allocate single pages, which was sufficient as long as the
device sector size did not exceed the PAGE_SIZE.
Given that block layer now supports block size upto 64KB, i.e. beyond
PAGE_SIZE, initialize a large page pool in sd_probe() if a higher sector
device is attached, ensuring atomicity. Adapt sd_set_special_bvec() to use
large page pool when a higher sector size device is attached. Hence enable
sector sizes > PAGE_SIZE in SCSI sd driver.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Swarna Prabhu <s.prabhu@samsung.com>
Co-developed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://patch.msgid.link/20260219043741.276729-2-sw.prabhu6@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible.
Reported-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6e8174215573a84b797
Tested-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20260216062002.61937-1-activprithvi@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These deprecated sysctl has been broken since commit 26d1c80fd6
("scsi/sg: move sg-big-buff sysctl to scsi/sg.c") and nobody has found
this. I believe it's time to remove it, which will allow us to clean up a
significant amount of code.
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-4-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size.
Fixes: 6460e75a10 ("[SCSI] sg: fixes for large page_size")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-3-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 26d1c80fd6 ("scsi/sg: move sg-big-buff sysctl to scsi/sg.c") made
a mistake. sysctl sg-big-buff was not created because the call to
register_sg_sysctls() was placed on the wrong code path.
Fixes: 26d1c80fd6 ("scsi/sg: move sg-big-buff sysctl to scsi/sg.c")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-2-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a 'serial' sysfs attribute for SCSI and SATA devices. This attribute
exposes the Unit Serial Number, which is derived from the Device
Identification Vital Product Data (VPD) page 0x80.
Whitespace is stripped from the retrieved serial number to handle the
different alignment (right-aligned for SCSI, potentially left-aligned for
SATA). As noted in SAT-5 10.5.3, "Although SPC-5 defines the PRODUCT SERIAL
NUMBER field as right-aligned, ACS-5 does not require its SERIAL NUMBER
field to be right-aligned. Therefore, right-alignment of the PRODUCT SERIAL
NUMBER field for the translation is not assured."
This attribute is used by tools such as lsblk to display the serial number
of block devices.
[mkp: length adjustment]
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260209212151.342151-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jesper Dangaard Brouer says:
====================
net: sched: refactor qdisc drop reasons into dedicated tracepoint
This series refactors qdisc drop reason handling by introducing a dedicated
enum qdisc_drop_reason and trace_qdisc_drop tracepoint, providing qdisc
layer drop diagnostics with direct qdisc context visibility.
Background:
-----------
Identifying which qdisc dropped a packet via skb_drop_reason is difficult.
Normally, the kfree_skb tracepoint caller "location" hints at the dropping
code, but qdisc drops happen at a central point (__dev_queue_xmit), making
this unusable. As a workaround, commits 5765c7f6e3 ("net_sched: sch_fq:
add three drop_reason") and a42d71e322 ("net_sched: sch_cake: Add drop
reasons") encoded qdisc names directly in the drop reason enums.
This series provides a cleaner solution by creating a dedicated qdisc
tracepoint that naturally includes qdisc context (handle, parent, kind).
Solution:
---------
Create a new tracepoint trace_qdisc_drop that builds on top of existing
trace_qdisc_enqueue infrastructure. It includes qdisc handle, parent,
qdisc kind (name), and device information directly.
The existing SKB_DROP_REASON_QDISC_DROP is retained for backwards
compatibility via kfree_skb_reason(). The qdisc-specific drop reasons
(QDISC_DROP_*) provide fine-grained detail via the new tracepoint.
The enum uses subsystem encoding (offset by SKB_DROP_REASON_SUBSYS_QDISC)
to catch type mismatches during debugging.
This implements the alternative approach described in:
https://lore.kernel.org/all/6be17a08-f8aa-4f91-9bd0-d9e1f0a92d90@kernel.org/
====================
Link: https://patch.msgid.link/177211325634.3011628.9343837509740374154.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 drops packets during dequeue but was using kfree_skb_reason()
directly, bypassing trace_qdisc_drop. Convert to qdisc_dequeue_drop()
and add QDISC_DROP_L4S_STEP_NON_ECN to the qdisc drop reason enum.
- Set TCQ_F_DEQUEUE_DROPS flag in dualpi2_init()
- Use enum qdisc_drop_reason in drop_and_retry()
- Replace kfree_skb_reason() with qdisc_dequeue_drop()
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/177211351978.3011628.11267023360997620069.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename QDISC_DROP_CAKE_FLOOD to QDISC_DROP_FLOOD_PROTECTION to use a
generic name without embedding the qdisc name. This follows the
principle that drop reasons should describe the drop mechanism rather
than being tied to a specific qdisc implementation.
The flood protection drop reason is used by qdiscs implementing
probabilistic drop algorithms (like BLUE) that detect unresponsive
flows indicating potential DoS or flood attacks. CAKE uses this via
its Cobalt AQM component.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/177211347537.3011628.13759059534638729639.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename FQ-specific drop reasons to generic names:
- QDISC_DROP_FQ_BAND_LIMIT -> QDISC_DROP_BAND_LIMIT
- QDISC_DROP_FQ_HORIZON_LIMIT -> QDISC_DROP_HORIZON_LIMIT
This follows the principle that drop reasons should describe the drop
mechanism rather than being tied to a specific qdisc implementation.
These concepts (priority band limits, timestamp horizon) could apply
to other qdiscs as well.
Remove the local macro define FQDR() and instead use the
full QDISC_DROP_* name to make it easier to navigate code.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/177211346902.3011628.12523261489552097455.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert SFQ to use the new qdisc-specific drop reason infrastructure.
This patch demonstrates how to convert a flow-based qdisc to use the
new enum qdisc_drop_reason. As part of this conversion:
- Add QDISC_DROP_MAXFLOWS for flow table exhaustion
- Rename FQ_FLOW_LIMIT to generic FLOW_LIMIT, now shared by FQ and SFQ
- Use QDISC_DROP_OVERLIMIT for sfq_drop() when overall limit exceeded
- Use QDISC_DROP_FLOW_LIMIT for per-flow depth limit exceeded
The FLOW_LIMIT reason is now a common drop reason for per-flow limits,
applicable to both FQ and SFQ qdiscs.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/177211345946.3011628.12770616071857185664.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create new enum qdisc_drop_reason and trace_qdisc_drop tracepoint
for qdisc layer drop diagnostics with direct qdisc context visibility.
The new tracepoint includes qdisc handle, parent, kind (name), and
device information. Existing SKB_DROP_REASON_QDISC_DROP is retained
for backwards compatibility via kfree_skb_reason().
Convert qdiscs with drop reasons to use the new infrastructure.
Change CAKE's cobalt_should_drop() return type from enum skb_drop_reason
to enum qdisc_drop_reason to fix implicit enum conversion warnings.
Use QDISC_DROP_UNSPEC as the 'not dropped' sentinel instead of
SKB_NOT_DROPPED_YET. Both have the same compiled value (0), so the
comparison logic remains semantically equivalent.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/177211345275.3011628.1974310302645218067.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Iomega ZIP 100 (Z100P2) can't process IO Advice Hints Grouping mode
page query. It immediately switches to the status phase 0xb8 after
receiving the subpage code 0x05 of MODE_SENSE_10 command, which fails
imm_out() and turns into DID_ERROR of this command, which leads to unusable
device. This was tested with an Iomega ZIP 100 (Z100P2) connected with a
StarTech PEX1P2 AX99100 PCIe parallel port card.
Prior to this fix, Test Unit Ready fails and the drive can't be used:
IMM: returned SCSI status b8
sd 7:0:6:0: [sdh] Test Unit Ready failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260227181823.892932-1-fuchsfl@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Antony Antony says:
====================
icmp: Fix icmp error source address over xfrm tunnel
icmp: Fix icmp error source address over xfrm tunnel
This fix, originally sent to XFRM/IPsec, has been recommended by
Steffen Klassert to submit to the net tree, since it changes ICMP
behavior.
The patch addresses a minor issue related to the IPv4 source address
of ICMP error messages. The bug only occurs when xfrm policies are
configured. It originated from an old 2011 commit:
commit 415b3334a2 ("icmp: Fix regression in nexthop resolution during
replies.")
====================
Link: https://patch.msgid.link/cover.1772101380.git.antony.antony@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IPsec gateway generates an ICMP error (e.g., Destination Host
Unreachable), the source address incorrectly shows the unreachable
destination instead of the gateway's address. IPv6 behaves correctly.
Before fix:
ping 10.1.6.3
From 10.1.6.3 icmp_seq=1 Destination Host Unreachable
(wrong - 10.1.6.3 is the unreachable host)
After fix:
ping 10.1.6.3
From 10.1.5.2 icmp_seq=1 Destination Host Unreachable
(correct - 10.1.5.2 is the gateway)
The fix removes the memcpy that overwrote fl4 with fl4_dec after
xfrm_lookup(). A follow-up commit adds a selftest.
Fixes: 415b3334a2 ("icmp: Fix regression in nexthop resolution during replies.")
Cc: stable+noautosel@kernel.org # Avoid false positives in tests
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/19a0156ff6e76baa323a81d710510d399a6ff63a.1772101380.git.antony.antony@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add UFS Host Controller (UFSHC) compatible for x1e80100 SoC. Use SM8550
as a fallback since x1e80100 is fully compatible with it.
Qualcomm UFSHC is no longer compatible with JEDEC UFS-2.0 binding.
Avoid using the "jedec,ufs-2.0" string in the compatible property.
[mkp: conflict resolution]
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20260211132926.3716716-2-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Milos SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260112-milos-ufs-v2-2-d3ce4f61f030@fairphone.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver retains reset history even after the IOC has successfully
reached the READY state. That leaves stale reset information active during
normal operation and can mislead recovery and diagnostics. In addition, if
the IOC becomes READY just as the ready timeout loop exits, the driver
still follows the failure path and may retry or report failure incorrectly.
Clear reset history once READY is confirmed so driver state matches actual
IOC status. After the timeout loop, recheck the IOC state and treat READY
as success instead of failing.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid all kernel-doc warnings in lpfc.h:
- Use the correct function parameter name
- Add a '*' to a kernel-doc line
- Repair the function Returns: comments
Fixes these warnings:
Warning: drivers/scsi/lpfc/lpfc.h:1674 No description found for return
value of 'lpfc_next_online_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1686 No description found for return
value of 'lpfc_next_present_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1700 function parameter 'eq' not
described in 'lpfc_sli4_mod_hba_eq_delay'
Warning: drivers/scsi/lpfc/lpfc.h:1755 bad line: --------------------------
Warning: drivers/scsi/lpfc/lpfc.h:1759 No description found for return
value of 'lpfc_is_vmid_enabled'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260224234954.3606638-1-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Extend the MAC_TCR_SS (Speed Select) register field width from 2 bits
to 3 bits to properly support all speed settings.
The MAC_TCR register's SS field encoding requires 3 bits to represent
all supported speeds:
- 0x00: 10Gbps (XGMII)
- 0x02: 2.5Gbps (GMII) / 100Mbps
- 0x03: 1Gbps / 10Mbps
- 0x06: 2.5Gbps (XGMII) - P100a only
With only 2 bits, values 0x04-0x07 cannot be represented, which breaks
2.5G XGMII mode on newer platforms and causes incorrect speed select
values to be programmed.
Fixes: 07445f3c7c ("amd-xgbe: Add support for 10 Mbps speed")
Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260226170753.250312-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
megasas_get_device_list() and megasas_get_snapdump_properties() may unlock
instance->reset_mutex indirectly. Hence, hold reset_mutex while calling
these functions.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: megaraidlinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-31-bart.vanassche@linux.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move a spin_unlock_irqrestore() call such that the io_lock_acquired
variable can be eliminated. This patch prepares for enabling the Clang
thread-safety analyzer.
Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260223220102.2158611-30-bart.vanassche@linux.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
