If a batch buffer is complete, it makes little sense to preempt the
fence signaling instructions in the ring, as the largest portion of the
work (the batch buffer) is already done and fence signaling consists of
only a few instructions. If these instructions are preempted, the GuC
would need to perform a context switch just to signal the fence, which
is costly and delays fence signaling. Avoid this scenario by disabling
preemption immediately after the BB start instruction and re-enabling it
after executing the fence signaling instructions.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260115004546.58060-1-matthew.brost@intel.com
When enabling Clang's Context Analysis (aka. Thread Safety Analysis) on
kernel/futex/core.o (see Peter's changes at [1]), in arm64 LTO builds we
could see:
| kernel/futex/core.c:982:1: warning: spinlock 'atomic ? __u.__val : q->lock_ptr' is still held at the end of function [-Wthread-safety-analysis]
| 982 | }
| | ^
| kernel/futex/core.c:976:2: note: spinlock acquired here
| 976 | spin_lock(lock_ptr);
| | ^
| kernel/futex/core.c:982:1: warning: expecting spinlock 'q->lock_ptr' to be held at the end of function [-Wthread-safety-analysis]
| 982 | }
| | ^
| kernel/futex/core.c:966:6: note: spinlock acquired here
| 966 | void futex_q_lockptr_lock(struct futex_q *q)
| | ^
| 2 warnings generated.
Where we have:
extern void futex_q_lockptr_lock(struct futex_q *q) __acquires(q->lock_ptr);
..
void futex_q_lockptr_lock(struct futex_q *q)
{
spinlock_t *lock_ptr;
/*
* See futex_unqueue() why lock_ptr can change.
*/
guard(rcu)();
retry:
>> lock_ptr = READ_ONCE(q->lock_ptr);
spin_lock(lock_ptr);
...
}
At the time of the above report (prior to removal of the 'atomic' flag),
Clang Thread Safety Analysis's alias analysis resolved 'lock_ptr' to
'atomic ? __u.__val : q->lock_ptr' (now just '__u.__val'), and used
this as the identity of the context lock given it cannot "see through"
the inline assembly; however, we want 'q->lock_ptr' as the canonical
context lock.
While for code generation the compiler simplified to '__u.__val' for
pointers (8 byte case -> 'atomic' was set), TSA's analysis (a) happens
much earlier on the AST, and (b) would be the wrong deduction.
Now that we've gotten rid of the 'atomic' ternary comparison, we can
return '__u.__val' through a pointer that we initialize with '&x', but
then update via a pointer-to-pointer. When READ_ONCE()'ing a context
lock pointer, TSA's alias analysis does not invalidate the initial alias
when updated through the pointer-to-pointer, and we make it effectively
"see through" the __READ_ONCE().
Code generation is unchanged.
Link: https://lkml.kernel.org/r/20260121110704.221498346@infradead.org [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601221040.TeM0ihff-lkp@intel.com/
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Boqun Feng <boqun@kernel.org>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Rework arm64 LTO __READ_ONCE() to improve code generation as follows:
1. Replace _Generic-based __unqual_scalar_typeof() with more complete
__rwonce_typeof_unqual(). This strips qualifiers from all types, not
just integer types, which is required to be able to assign (must be
non-const) to __u.__val in the non-atomic case (required for #2).
One subtle point here is that non-integer types of __val could be const
or volatile within the union with the old __unqual_scalar_typeof(), if
the passed variable is const or volatile. This would then result in a
forced load from the stack if __u.__val is volatile; in the case of
const, it does look odd if the underlying storage changes, but the
compiler is told said member is "const" -- it smells like UB.
2. Eliminate the atomic flag and ternary conditional expression. Move
the fallback volatile load into the default case of the switch,
ensuring __u is unconditionally initialized across all paths.
The statement expression now unconditionally returns __u.__val.
This refactoring appears to help the compiler improve (or fix) code
generation.
With a defconfig + LTO + debug options builds, we observe different
codegen for the following functions:
btrfs_reclaim_sweep (708 -> 1032 bytes)
btrfs_sinfo_bg_reclaim_threshold_store (200 -> 204 bytes)
check_mem_access (3652 -> 3692 bytes) [inlined bpf_map_is_rdonly]
console_flush_all (1268 -> 1264 bytes)
console_lock_spinning_disable_and_check (180 -> 176 bytes)
igb_add_filter (640 -> 636 bytes)
igb_config_tx_modes (2404 -> 2400 bytes)
kvm_vcpu_on_spin (480 -> 476 bytes)
map_freeze (376 -> 380 bytes)
netlink_bind (1664 -> 1656 bytes)
nmi_cpu_backtrace (404 -> 400 bytes)
set_rps_cpu (516 -> 520 bytes)
swap_cluster_readahead (944 -> 932 bytes)
tcp_accecn_third_ack (328 -> 336 bytes)
tcp_create_openreq_child (1764 -> 1772 bytes)
tcp_data_queue (5784 -> 5892 bytes)
tcp_ecn_rcv_synack (620 -> 628 bytes)
xen_manage_runstate_time (944 -> 896 bytes)
xen_steal_clock (340 -> 296 bytes)
Increase of some functions are due to more aggressive inlining due to
better codegen (in this build, e.g. bpf_map_is_rdonly is no longer
present due to being inlined completely).
NOTE: The return-value-of-function-drops-qualifiers hack was first
suggested by Al Viro in [1], which notes some of its limitations which
make it unsuitable for a general __unqual_scalar_typeof() replacement.
Notably, array types are not supported, and GCC 8.1-8.3 still fail. Why
should we use it here? READ_ONCE() does not support reading whole
arrays, and the GCC version problem only affects 3 minor releases of a
very ancient still-supported GCC version; not only that, this arm64
READ_ONCE() version is currently only activated by LTO builds, which
to-date are *only supported by Clang*!
Link: https://lore.kernel.org/all/20260111182010.GH3634291@ZenIV/ [1]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
The call to kmalloc_obj(observed.lines) returns "char (*)[3][512]",
a pointer to the whole 2D array. But "expect" wants to be "char (*)[512]",
the decayed pointer type, as if it were observed.lines itself (though
without the "3" bounds). This produces the following build error:
../kernel/kcsan/kcsan_test.c: In function '__report_matches':
../kernel/kcsan/kcsan_test.c:171:16: error: assignment to 'char (*)[512]' from incompatible pointer type 'char (*)[3][512]'
[-Wincompatible-pointer-types]
171 | expect = kmalloc_obj(observed.lines);
| ^
Instead of changing the "expect" type to "char (*)[3][512]" and
requiring a dereference at each use (e.g. "(expect*)[0]"), just
explicitly cast the return to the desired type.
Note that I'm intentionally not switching back to byte-based "kmalloc"
here because I cannot find a way for the Coccinelle script (which will
be used going forward to catch future conversions) to exclude this case.
Tested with:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_KCSAN=y \
--kconfig_add CONFIG_KCSAN_KUNIT_TEST=y \
--arch=x86_64 --qemu_args '-smp 2' kcsan
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Signed-off-by: Kees Cook <kees@kernel.org>
On x86, as a rule the CMOS RTC address space handler is set up by the
CMOS RTC ACPI scan handler attach callback, acpi_cmos_rtc_attach(),
but if the ACPI namespace does not contain a CMOS RTC device object,
the CMOS RTC address space handler installation is taken care of the
ACPI TAD (Timer and Alarm Device) driver.
This is not particularly straightforward and can be avoided by adding
the ACPI TAD device ID to the CMOS RTC ACPI scan handler which will
cause it to create a platform device for ACPI TAD after installing
the CMOS RTC address space handler. One related detail that needs to
be taken care of, though, is that the creation of an ACPI TAD platform
device should not cause cmos_rtc_platform_device_present to be set,
since this may cause add_rtc_cmos() to suppress the creation of a
fallback CMOS RTC platform device which may not be the right thing
to do (for instance, due to the fact that the ACPI TAD driver is
missing an RTC class device interface).
After doing the above, the CMOS RTC address space handler installation
and removal can be dropped from the ACPI TAD driver (which allows it to
be simplified quite a bit), acpi_remove_cmos_rtc_space_handler() can
be dropped and acpi_install_cmos_rtc_space_handler() can be made static.
Update the code as per the above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/23028644.EfDdHjke4D@rafael.j.wysocki
Previous changes effectively prevented PNP devices from being created
for the CMOS RTC on x86 with ACPI.
Although in principle a CMOS RTC PNP device may exist on an x86 system
without ACPI (that is, an x86 system where there is no ACPI at all, not
one booted with ACPI disabled), such systems were there in the field ~30
years ago and most likely they would not be able to run a contemporary
Linux kernel.
For the above reasons, drop the PNP device support from the rtc-cmos
driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/2355012.iZASKD2KPV@rafael.j.wysocki
Previous changes effectively prevented PNP devices from being created
for the CMOS RTC on x86 with ACPI.
Although in principle a CMOS RTC PNP device may exist on an x86 system
without ACPI (that is, an x86 system where there is no ACPI at all, not
one booted with ACPI disabled), such systems were there in the field ~30
years ago and most likely they would not be able to run a contemporary
Linux kernel.
For the above reasons, drop the PNP device check from add_rtc_cmos().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # x86
Link: https://patch.msgid.link/8660687.T7Z3S40VBb@rafael.j.wysocki
A previous change updated is_cmos_rtc_device() to effectively never
allow PNP devices to be created for the CMOS RTC on x86 with ACPI
and the PNP bus type is only used on x86, so the CMOS RTC device IDs
can be dropped from acpi_pnp_device_ids[] and is_cmos_rtc_device() can
go away completely.
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3411834.aeNJFYEL58@rafael.j.wysocki
Modify the rtc-cmos driver to bind to a platform device on systems with
ACPI via acpi_match_table and advertise the CMOST RTC ACPI device IDs
for driver auto-loading. Note that adding the requisite device IDs to
it and exposing them via MODULE_DEVICE_TABLE() is sufficient for this
purpose.
Since the ACPI device IDs in question are the same as for the CMOS RTC
ACPI scan handler, put them into a common header file and use the
definition from there in both places.
Additionally, to prevent a PNP device from being created for the CMOS
RTC if a platform one is present already, make is_cmos_rtc_device()
check cmos_rtc_platform_device_present introduced previously.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/13969123.uLZWGnKmhe@rafael.j.wysocki
Make the CMOS RTC ACPI scan handler create a platform device that will
be used subsequently by rtc-cmos for driver binding on x86 systems with
ACPI and update add_rtc_cmos() to skip registering a fallback platform
device for the CMOS RTC when the above one has been registered.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # x86
Link: https://patch.msgid.link/1962427.tdWV9SEqCh@rafael.j.wysocki
The kernel-doc comments for sdca_irq_request() contained some typos
that lead to build warnings with W=1. Let's correct them.
Fixes: b126394d9e ("ASoC: SDCA: Generic interrupt support")
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260226154753.1083320-1-tiwai@suse.de
Seems bigger than usual, a number of things were posted near/during the
merg window:
- Fix some compilation regressions related to the new DMABUF code
- Close a race with ib_register_device() vs netdev events that causes
GID table corruption
- Compilation warnings with some compilers in bng_re
- Correct error unwind in bng_re and the umem pinned dmabuf
- Avoid NULL pointer crash in ionic during query_port()
- Check the size for uAPI validation checks in EFA
- Several system call stack leaks in drivers found with AI
- Fix the new restricted_node_type so it works with wildcard listens too
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaaBmHAAKCRCFwuHvBreF
YZaiAP42BqmvK9JndjY37krvHZ6NG7kYyx2DeuFQKKTLXhOUkQD7BUnnInKMRDNX
fYkc6vibEQ/C0p50cme1m2aRHba3Vg0=
=4LA8
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Seems bigger than usual, a number of things were posted near/during
the merg window:
- Fix some compilation regressions related to the new DMABUF code
- Close a race with ib_register_device() vs netdev events that causes
GID table corruption
- Compilation warnings with some compilers in bng_re
- Correct error unwind in bng_re and the umem pinned dmabuf
- Avoid NULL pointer crash in ionic during query_port()
- Check the size for uAPI validation checks in EFA
- Several system call stack leaks in drivers found with AI
- Fix the new restricted_node_type so it works with wildcard listens
too"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Import DMA-BUF module in uverbs_std_types_dmabuf file
RDMA/umem: Fix double dma_buf_unpin in failure path
RDMA/core: Check id_priv->restricted_node_type in cma_listen_on_dev()
RDMA/ionic: Fix kernel stack leak in ionic_create_cq()
RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
RDMA/efa: Fix typo in efa_alloc_mr()
RDMA/ionic: Fix potential NULL pointer dereference in ionic_query_port
RDMA/bng_re: Unwind bng_re_dev_init properly
RDMA/bng_re: Remove unnessary validity checks
RDMA/core: Fix stale RoCE GIDs during netdev events at registration
RDMA/uverbs: select CONFIG_DMA_SHARED_BUFFER
The implementation of ksize() was updated with kernel-doc by commit
fab0694646 ("mm/slab: move [__]ksize and slab_ksize() to mm/slub.c")
However, the public header still contains a kernel-doc comment
attached to the ksize() prototype.
Having documentation both in the header and next to the implementation
causes Sphinx to treat the function as being documented twice,
resulting in the warning:
WARNING: Duplicate C declaration, also defined at core-api/mm-api:521
Declaration is '.. c:function:: size_t ksize(const void *objp)'
Kernel-doc guidelines recommend keeping the documentation with the
function implementation. Therefore remove the redundant kernel-doc
block from include/linux/slab.h so that the implementation in slub.c
remains the canonical source for documentation.
No functional change.
Fixes: fab0694646 ("mm/slab: move [__]ksize and slab_ksize() to mm/slub.c")
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Link: https://patch.msgid.link/20260226054712.3610744-1-sanjayembedded@gmail.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
alloc_empty_sheaf() allocates sheaves from SLAB_KMALLOC caches using
__GFP_NO_OBJ_EXT to avoid recursion, however it does not mark their
allocation tags empty before freeing, which results in a warning when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is set. Fix this by marking allocation
tags for such sheaves as empty.
The problem was technically introduced in commit 4c0a17e283 but only
becomes possible to hit with commit 913ffd3a1b.
Fixes: 4c0a17e283 ("slab: prevent recursive kmalloc() in alloc_empty_sheaf()")
Fixes: 913ffd3a1b ("slab: handle kmalloc sheaves bootstrap")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20260223155128.3849-1-00107082@163.com/
Analyzed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: David Wang <00107082@163.com>
Link: https://patch.msgid.link/20260225163407.2218712-1-surenb@google.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
When refill_sheaf() is called, failing to refill the sheaf doesn't
necessarily mean the allocation will fail because a fallback path
might be available and serve the allocation request.
Suppress spurious warnings by passing __GFP_NOWARN along with
__GFP_NOMEMALLOC whenever a fallback path is available.
When the caller is alloc_full_sheaf() or __pcs_replace_empty_main(),
the kernel always falls back to the slowpath (__slab_alloc_node()).
For __prefill_sheaf_pfmemalloc(), the fallback path is available
only when gfp_pfmemalloc_allowed() returns true.
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/linux-mm/aZt2-oS9lkmwT7Ch@debian.local
Fixes: 1ce20c28ea ("slab: handle pfmemalloc slabs properly with sheaves")
Link: https://lore.kernel.org/linux-mm/aZwSreGj9-HHdD-j@hyeyoo
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260223133322.16705-1-harry.yoo@oracle.com
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
This screen timing requires a backlight off time of more than 100ms
from the end of the data stream to avoid screen flickering and red
light caused by screen material limitations.
Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260226083235.2176689-1-zhouhaikun5@huaqin.corp-partner.google.com
Uniwill devices have a built in gesture in the touchpad to de- and
reactivate it by double taping the upper left corner. This gesture stops
working when latency is set to high, so this patch keeps the latency on
normal.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
[jkosina@suse.com: change bit from 24 to 25]
[jkosina@suse.com: update shortlog]
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Parade-tc3408 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 300ms,
so the post_gpio_reset_on_delay_ms is set to 300.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20260108063524.742464-3-yelangyan@huaqin.corp-partner.google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The tc3408 touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260108063524.742464-2-yelangyan@huaqin.corp-partner.google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We don't process this driver code for kernel-doc, and the "/**" marker
leads to warnings with W=1 builds. Drop the superfluous markers, and
also fix the invalid mark up, too.
Link: https://patch.msgid.link/20260226155456.1092186-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At fixing the memory leak of xfer buffer, we forgot to update the
corresponding comment, too. This resulted in a kernel-doc warning
with W=1. Let's correct it.
Fixes: 5c7ef50012 ("ALSA: qc_audio_offload: avoid leaking xfer_buf allocation")
Link: https://patch.msgid.link/20260226154414.1081568-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't process USB-audio driver code for kernel-doc, and the "/**"
marker leads to warnings with W=1 builds. Drop the superfluous
markers.
Link: https://patch.msgid.link/20260226154414.1081568-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For better maintenance sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260109173718.3605829-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of open coding, use device_match_of_node() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260109173718.3605829-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Yes, while it's a bit longer in terms of LoCs, it's more readable
when we use the usual patter to check for errors, and not for
a success). This eliminates unneeded assignment and moves the
needed one closer to its user which is better programming pattern
because it allows avoiding potential errors in case the variable
is getting reused. Also note that the same pattern have been used
already in dmaenginem_async_device_register().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260109173718.3605829-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As the DMA controller on Sophgo CV1800 series SoC only has 8 channels,
the SoC provides a dma multiplexer to reuse the DMA channel. However,
the dma multiplexer also controls the DMA interrupt multiplexer, which
means that the dma multiplexer needs to know the channel number.
Allow the driver to use DMA phandle args as the channel number, so the
DMA multiplexer can route the DMA interrupt correctly.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120013706.436742-3-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controller on CV1800B needs to use the DMA phandle args
as the channel number instead of hardware handshake number, so
add a new compatible for the DMA controller on CV1800B.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260120013706.436742-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
checkpatch.pl --strict reports a WARNING in dw-axi-dmac-platform.c:
WARNING: void function return statements are not generally useful
FILE: drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
According to Linux kernel coding style [Documentation/process/
coding-style.rst], explicit "return;" statements at the end of void
functions are redundant and should be omitted. The function will
automatically return upon reaching the closing brace, so the extra
statement adds unnecessary clutter without functional benefit.
This patch removes the superfluous "return;" statement in
dw_axi_dma_set_hw_channel() to comply with kernel coding standards and
eliminate the checkpatch warning.
Fixes: 32286e2793 ("dmaengine: dw-axi-dmac: Remove free slot check algorithm in dw_axi_dma_set_hw_channel")
Signed-off-by: Khairul Anuar Romli <karom.9560@gmail.com>
Link: https://patch.msgid.link/20260202060224.12616-4-karom.9560@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
checkpatch.pl reports a CHECK warning in dw-axi-dmac-platform.c:
CHECK: Please use a blank line after function/struct/union/enum
declarations
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:
The Linux kernel coding style [Documentation/process/coding-style.rst]
requires a blank line after function definitions to provide visual
separation between distinct code elements.
This patch inserts the required blank line after the closing brace of the
function definition after dw_axi_dma_set_byte_halfword(), placing it
before the contextual comment that describes the locking requirements.
Signed-off-by: Khairul Anuar Romli <karom.9560@gmail.com>
Link: https://patch.msgid.link/20260202060224.12616-3-karom.9560@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In ath12k_wmi_tlv_fw_stats_data_parse() and
ath12k_wmi_tlv_rssi_chain_parse(), the driver uses
ieee80211_find_sta_by_ifaddr() to look up the station associated with the
incoming firmware statistics. This works under normal conditions but fails
during AP disconnection, resulting in log messages like:
wlan0: deauthenticating from xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: moving STA xxxxxx to state 3
wlan0: moving STA xxxxxx to state 2
wlan0: moving STA xxxxxx to state 1
ath12k_pci 0000:02:00.0: not found station bssid xxxxxx for vdev stat
ath12k_pci 0000:02:00.0: not found station of bssid xxxxxx for rssi chain
ath12k_pci 0000:02:00.0: failed to pull fw stats: -71
ath12k_pci 0000:02:00.0: time out while waiting for get fw stats
wlan0: Removed STA xxxxxx
wlan0: Destroyed STA xxxxxx
The failure happens because the station has already been removed from
ieee80211_local::sta_hash by the time firmware statistics are requested
through drv_sta_statistics().
Switch the lookup to ath12k_link_sta_find_by_addr(), which searches the
driver's link station hash table that still has the station recorded
at that time. This also implicitly fixes another issue: the current code
always uses deflink regardless of which link the statistics belong to,
which is incorrect in MLO scenarios. The new helper returns the correct
link station.
Additionally, raise the log level on lookup failures. With the updated
helper, such failures should no longer occur under normal conditions.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 79e7b04b53 ("wifi: ath12k: report station mode signal strength")
Fixes: 6af5bc381b ("wifi: ath12k: report station mode per-chain signal strength")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260129-ath12k-fw-stats-fixes-v1-2-55d66064f4d5@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
To get firmware statistics, currently ar->pdev->pdev_id is passed as an
argument to ath12k_mac_get_fw_stats() in ath12k_mac_op_sta_statistics().
For single pdev device like WCN7850, its value is 0 which represents the
SoC pdev id. As a result, WCN7850 firmware sends the same reply to host
twice, which further results in memory leak:
unreferenced object 0xffff88812e286000 (size 192):
comm "softirq", pid 0, jiffies 4294981997
hex dump (first 32 bytes):
10 a5 40 11 81 88 ff ff 10 a5 40 11 81 88 ff ff ..@.......@.....
00 00 00 00 00 00 00 00 80 ff ff ff 33 05 00 00 ............3...
backtrace (crc cecc8c82):
__kmalloc_cache_noprof
ath12k_wmi_tlv_fw_stats_parse
ath12k_wmi_tlv_iter
ath12k_wmi_op_rx
ath12k_htc_rx_completion_handler
ath12k_ce_per_engine_service
ath12k_pci_ce_workqueue
process_one_work
bh_worker
tasklet_action
handle_softirqs
Detailed explanation is:
1. ath12k_mac_get_fw_stats() called in ath12k_mac_op_sta_statistics() to
get vdev statistics, making the caller thread wait.
2. firmware sends the first reply, ath12k_wmi_tlv_fw_stats_data_parse()
allocates buffers to cache necessary information. Following that, in
ath12k_wmi_fw_stats_process() if events of all started vdev haved been
received, is_end flag is set hence the waiting thread gets waken up by
the ar->fw_stats_done/->fw_stats_complete signals.
3. ath12k_mac_get_fw_stats() wakes up and returns successfully.
ath12k_mac_op_sta_statistics() saves required parameters and calls
ath12k_fw_stats_reset() to free buffers allocated earlier.
4. firmware sends the second reply. As usual, buffers are allocated and
attached to the ar->fw_stats.vdevs list. Note this time there is no
thread waiting, therefore no chance to free those buffers.
5. ath12k module gets unloaded. If there has been no more firmware
statistics request made since step 4, or if the request fails (see
the example in the following patch), there is no chance to call
ath12k_fw_stats_reset(). Consequently those buffers leak.
Actually for single pdev device, using SoC pdev id in
ath12k_mac_op_sta_statistics() is wrong, because the purpose is to get
statistics of a specific station, which is mapped to a specific pdev. That
said, the id of actual individual pdev should be fetched and used instead.
The helper ath12k_mac_get_target_pdev_id() serves for this purpose, hence
use it to fix this issue. Note it also works for other devices as well due
to the single_pdev_only check inside.
The same applies to ath12k_mac_op_get_txpower() and
ath12k_mac_op_link_sta_statistics() as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 79e7b04b53 ("wifi: ath12k: report station mode signal strength")
Fixes: e92c658b05 ("wifi: ath12k: add get_txpower mac ops")
Fixes: ebebe66ec2 ("wifi: ath12k: fill link station statistics for MLO")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260129-ath12k-fw-stats-fixes-v1-1-55d66064f4d5@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
EPOMAKER TH87 has the very same ID as Apple Aluminum keyboard
(05ac:024f) although it doesn't work as expected in compatible way.
Put three entries to the non-apple keyboards list to exclude this
device: one for BT ("TH87"), one for USB ("HFD Epomaker TH87") and one
for dongle ("2.4G Wireless Receiver").
Link: https://bugzilla.suse.com/show_bug.cgi?id=1258455
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
My e-mail address for linux work is changing to mike.leach@arm.com
from 1st Jan 2026. Update MAINTAINERS file accordingly
Updated .mailmap file accordingly.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226141354.638962-1-mike.leach@arm.com
Add device IDs of Nova Lake-H and Nova Lake-S into ishtp support list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Take de-facto ownership of core hid-pidff driver
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some devices (mainly Asetek) do not have deadband field in set
conditional usage. Do not fail set conditional usage search if it's
missing. Allows conditional effect playback on Asetek wheelbases.
Deadband is practically never used in simracing anyway.
Align property name in the whole driver to use 'deadband' without space.
Co-developed-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This is the same case as the previous MISSING_NEG_COEFFICIENT quirk
Co-developed-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver core can automatically create custom type attributes.
This makes the code and error-handling shorter.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260223-sysfs-const-slub-v1-1-ff86ffc26fff@weissschuh.net
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
fsnotify_recalc_mask() expects a plain struct fsnotify_mark_connector *,
but inode->i_fsnotify_marks is an __rcu pointer. Use fsn_mark->connector
instead to avoid sparse "different address spaces" warnings.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260214051217.1381363-1-sun.jian.kdev@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
The latter trigger LSM (e.g. SELinux) checks, which will log a denial
when permission is denied, so it's better to do them after validity
checks to avoid logging a denial when the operation would fail anyway.
Fixes: 0b3b094ac9 ("fanotify: Disallow permission events for proc filesystem")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20260216150625.793013-3-omosnace@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Make sure calling capable()/ns_capable() actually leads to access denied
when false is returned, because these functions emit an audit record
when a Linux Security Module denies the capability, which makes it
difficult to avoid allowing/silencing unnecessary permissions in
security policies (namely with SELinux).
Where the return value just used to set a flag, use the non-auditing
ns_capable_noaudit() instead.
Fixes: 7cea2a3c50 ("fanotify: support limited functionality for unprivileged users")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260216150625.793013-2-omosnace@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0a ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path.
Fixes: 1cce1eea0a ("inotify: Convert to using per-namespace limits")
Cc: stable@vger.kernel.org
Signed-off-by: Chia-Ming Chang <chiamingc@synology.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://patch.msgid.link/20260224093442.3076294-1-chiamingc@synology.com
Signed-off-by: Jan Kara <jack@suse.cz>
Add a check in remove_range_from_remap_tree() after we call
btrfs_lookup_block_group(), to check if it is NULL. This shouldn't
happen, but if it does we at least get an error rather than a segfault.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125129.2245240-1-clm@meta.com/
Fixes: 979e1dc3d6 ("btrfs: handle deletions from remapped block group")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
