Fix wrong variable used for error checking after dma_alloc_coherent()
call. The function checks cdns_ctrl->dma_cdma_desc instead of
cdns_ctrl->cdma_desc, which could lead to incorrect error handling.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac6 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds.
Cc: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/202602151911.AD092DFFCD@keescook/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add compatible string fsl,imx25-nand and fsl,imx27-nand (over 15 years
chips). Add one optional clocks for it because i.MX25 and i.MX27 upstream
DTS defines them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Takahiro has been an active contributor to the SPI NOR subsystem,
providing valuable patches and reviews. Add him as a designated
reviewer to help facilitate patch processing and maintenance.
Cc: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
I have not been actively involved in SPI NOR development recently and
would like to step down to focus on my current day-to-day work.
The subsystem remains in good hands with Pratyush and Michael.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The ECC engine strictly validates that flash OOB size equals exactly
64 bytes. However, some NAND chips have a larger physical OOB while
vendor firmware only uses the first 64 bytes for the ECC layout. For
example the Macronix MX35LF1G24AD found in the Netlink HG323DAC has
128 byte physical OOB but vendor firmware only uses the first 64
bytes (24 bytes free + 40 bytes BCH6 parity), leaving bytes 64-127
unused.
Since the engine only operates on the first 64 bytes of OOB
regardless of the physical size, change the check from exact match
to minimum size. Flash with OOB >= 64 bytes works correctly with
the engine's 64-byte layout.
Suggested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Mention that we are declaring the main SPI NAND flags with a comment.
Align the values with tabs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Introducing CONFIG_MTD_VIRT_CONCAT to separate the legacy flow from the new
approach, where only the concatenated partition is registered as an MTD
device, while the individual partitions that form it are not registered
independently, as they are typically not required by the user.
CONFIG_MTD_VIRT_CONCAT is a boolean configuration option that depends on
CONFIG_MTD_PARTITIONED_MASTER. When enabled, it allows flash nodes to be
exposed as individual MTD devices along with the other partitions.
The solution focuses on fixed-partitions description only as it depends on
device boundaries. It supports multiple sets of concatenated devices, each
comprising two or more partitions.
flash@0 {
reg = <0>;
partitions {
compatible = "fixed-partitions";
part0@0 {
part-concat-next = <&flash0_part1>;
label = "part0_0";
reg = <0x0 0x800000>;
};
flash0_part1: part1@800000 {
label = "part0_1";
reg = <800000 0x800000>;
};
part2@1000000 {
part-concat-next = <&flash1_part0>;
label = "part0_2";
reg = <0x800000 0x800000>;
};
};
};
flash@1 {
reg = <1>;
partitions {
compatible = "fixed-partitions";
flash1_part0: part1@0 {
label = "part1_0";
reg = <0x0 0x800000>;
};
part1@800000 {
label = "part1_1";
reg = <0x800000 0x800000>;
};
};
};
The partitions that gets created are
flash@0
part0_0-part0_1-concat
flash@1
part1_1
part0_2-part1_0-concat
Suggested-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
To enable a more generic approach for concatenating MTD devices,
struct mtd_concat should be accessible beyond the mtdconcat driver.
Therefore, the definition is being moved to a header file.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The AMD QSPI controller supports an advanced connection modes called
Stacked mode which allow the controller to treat two different flashes
as one storage.
In Stacked connection mode flashes share the same SPI bus, but different CS
line, controller driver asserts the CS of the flash to which it needs to
communicate. Stacked mode is a software abstraction rather than a
controller feature or capability. At any given time, the controller
communicates with one of the two connected flash devices, as determined by
the requested address and data length. If an operation starts on one flash
and ends on the other, the mtd layer needs to split it into two separate
operations and adjust the data length accordingly. For more information on
the modes please feel free to go through the controller flash interface
below [1].
To support stacked mode, the existing MTD concat driver has been extended
to be more generic, enabling multiple sets of MTD partitions to be
virtually concatenated, with each set forming a distinct logical MTD
device.
A new Device Tree property is introduced to facilitate this, containing
phandles of the partitions to be concatenated with the one where the
property is defined. This approach supports multiple sets of concatenated
partitions.
[1] https://docs.amd.com/r/en-US/am011-versal-acap-trm/QSPI-Flash-Device-Interface
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes: f5730d44e0 ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull a small idle/vtime series with two cputime accounting fixes plus
related cleanups and minor improvements.
* idle-vtime-fixes-cleanups:
s390/idle: Remove psw_idle() prototype
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
s390/irq/idle: Remove psw bits early
s390/idle: Inline update_timer_idle()
s390/idle: Slightly optimize idle time accounting
s390/idle: Add comment for non obvious code
s390/vtime: Fix virtual timer forwarding
s390/idle: Fix cpu idle exit cpu time accounting
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
psw_idle() does not exist anymore. Remove its prototype.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
do_account_vtime() runs always with interrupts disabled, therefore use
__this_cpu_read() instead of this_cpu_read() to get rid of a pointless
preempt_disable() / preempt_enable() pair.
Also there are no concurrent writers to the cpu time accounting fields
in lowcore. Therefore get rid of READ_ONCE() usages.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq()
when previous context was idle. This saves one conditional branch and is
closer to the original old assembly code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Slightly optimize account_idle_time_irq() and update_timer_idle():
- Use fast single instruction __atomic64() primitives to update per
cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE()
pairs
- stcctm() is an inline assembly with a full memory barrier. This
leads to a not necessary extra dereference of smp_cpu_mtid in
update_timer_idle(). Avoid this and read smp_cpu_mtid into a
variable
- Use __this_cpu_add() instead of this_cpu_add() to avoid disabling /
enabling of preemption several times in a loop in update_timer_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a comment to update_timer_idle() which describes why wall time (not
steal time) is added to steal_timer. This is not obvious and was reported
by Frederic Weisbecker.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes: 56e62a7370 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We should use READ_ONCE when reading from a SQE, make sure timeout gets
a stable timespec address.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There were merge conflicts in:
drivers/staging/rtl8723bs/core/rtw_ieee80211.c
drivers/staging/sm750fb/sm750_hw.c
that were causing problems, so fix this up in here so that going forward
everyone is on the same page and linux-next does not have problems.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modules are removed from modules_list in gb_audio_manager_remove() and
gb_audio_manager_remove_all() before kobject_put(). The TODO suggesting
list deletion in the kobject release callback is stale and misleading.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-3-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gb_audio_manager_get_module() has no in-tree callers so remove the
unused function to avoid carrying dead code.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-2-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed") with
the direct format string dev_err(&pdev->dev, "clk_prepare_enable
failed\n"). The extra level of indirection through %s is unnecessary.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-4-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace hardcoded -EFAULT returns with dev_err_probe() and PTR_ERR()
when devm_clk_get() fails in fsl_mx6_enable(). This ensures the
correct error code is propagated (e.g. -EPROBE_DEFER for deferred
probing) and avoids log noise during probe deferral.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-3-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_get() never returns NULL, so IS_ERR_OR_NULL() checks are
unnecessary. Replace them with IS_ERR() for both the "mlb" and
"pll8_mlb" clock lookups in fsl_mx6_enable().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-2-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed header alignment in hal_sdio_get_cmd_addr_8723b that violated
kernel coding style, cleaned the header by pulling arguments onto the
same line.
Signed-off-by: Dhyan K Prajapati <dhyan19022009@gmail.com>
Link: https://patch.msgid.link/20260225085747.9639-1-dhyan19022009@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor sprintf to sysfs_emit in all show functions of the greybus
audio manager module. This follows the standard kernel practice of
using sysfs_emit for sysfs attributes.
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Link: https://patch.msgid.link/20260225071212.9050-1-chakrabortyshubham66@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Asus VivoBook S15 S5507QA is sold with x1e-78-100 and x1p-42-100 SKUs.
Put the common part into one dtsi file to be included for model-specific dts.
Include the common part in the existing Vivobook S15 device tree.
Tested-by: Colin K. Williams <colin@li-nk.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-3-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enables access to EFI variables on this machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-2-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code:
cnt += in_ie[cnt + 1] + 2; /* get next */
is in both the "if" and "else" branches.
Remove this repetition, which will simplify the code and
improve readability.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260224164445.18316-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines to adhere to the Linux kernel
coding style. Issues reported by checkpatch.pl.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
Link: https://patch.msgid.link/20260224161319.89187-1-gawindlin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using a prerelease version as a minimum supported version for
CONFIG_WARN_CONTEXT_ANALYSIS was reasonable to do while LLVM 22 was the
development version so that people could immediately build from main and
start testing and validating this in their own code. However, it can be
problematic when using prerelease versions of LLVM 22, such as Android
clang 22.0.1 (the current android mainline compiler) or when bisecting
LLVM between llvmorg-22-init and llvmorg-23-init, to build the kernel,
as all compiler fixes for the context analysis may not be present,
potentially resulting in warnings that can easily turn into errors.
Now that LLVM 22 is released as 22.1.0, upgrade the check to require at
least this version to ensure that a user's toolchain actually has all
the changes needed for a smooth experience with context analysis.
Fixes: 3269701cb2 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260224-bump-clang-ver-context-analysis-v1-1-16cc7a90a040@kernel.org
The SCHED_DEADLINE scheduler allows reading the statically configured
run-time, deadline, and period parameters through the sched_getattr()
system call. However, there is no immediate way to access, from user space,
the current parameters used within the scheduler: the instantaneous runtime
left in the current cycle, as well as the current absolute deadline.
The `flags' sched_getattr() parameter, so far mandated to contain zero,
now supports the SCHED_GETATTR_FLAG_DL_DYNAMIC=1 flag, to request
retrieval of the leftover runtime and absolute deadline, converted to a
CLOCK_MONOTONIC reference, instead of the statically configured parameters.
This feature is useful for adaptive SCHED_DEADLINE tasks that need to
modify their behavior depending on whether or not there is enough runtime
left in the current period, and/or what is the current absolute deadline.
Notes:
- before returning the instantaneous parameters, the runtime is updated;
- the abs deadline is returned shifted from rq_clock() to ktime_get_ns(),
in CLOCK_MONOTONIC reference; this causes multiple invocations from the
same period to return values that may differ for a few ns (showing some
small drift), albeit the deadline doesn't move, in rq_clock() reference;
- the abs deadline value returned to user-space, as unsigned 64-bit value,
can represent nearly 585 years since boot time;
- setting flags=0 provides the old behavior (retrieve static parameters).
See also the notes from discussion held at OSPM 2025 on the topic
"Making user space aware of current deadline-scheduler parameters".
Signed-off-by: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20250912053937.31636-2-tommaso.cucinotta@santannapisa.it
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.
Fixes: 592903cdcb ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net
Merge series from Antoniu Miclaus <antoniu.miclaus@analog.com>:
Add a devres-managed version of spi_new_ancillary_device() that
automatically unregisters the ancillary SPI device when the parent
device is removed.
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.
Fixes: 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency updates handling code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221068
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20260225001752.890164-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Detecting a bandwidth change for a sink connected through a DP tunnel
depends on updating the sink's DPRX link rate and lane count.
detect_new_tunnel() -> update_tunnel_state() updates the link
configuration only if the tunnel state changes. However, after the
tunnel is created and bandwidth allocation mode is enabled, the tunnel
state itself may remain unchanged.
Record the sink bandwidth before creating the tunnel and compare it to
the bandwidth after tunnel creation and enabling bandwidth allocation
mode, ensuring that any bandwidth change is detected and userspace is
notified accordingly.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-6-imre.deak@intel.com
Split update_tunnel_state() into two helpers: one that updates the
tunnel state, and another that detects whether the tunnel bandwidth
has changed.
This prepares for a follow-up change that needs to compare the current
bandwidth against the value from before the DP tunnel was detected and
bandwidth allocation mode was enabled.
While at it, document the return value of update_tunnel_state().
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-4-imre.deak@intel.com
update_tunnel_state() checks whether a tunnel state change (e.g.
available tunnel bandwidth) affects the list of valid modes for the
sink connected through the tunnel. If so, its caller sends a hotplug
event so userspace can re-enumerate the modes.
A change in tunnel bandwidth does not affect the mode list if the
bandwidth was above the sink's DPRX bandwidth both before and after the
update, since in that case the effective bandwidth remains limited by
the DPRX.
As get_current_link_bw() via intel_dp_max_link_data_rate() already
returns bandwidth values clamped to the DPRX limit, the condition for
detecting a mode list change can be simplified to:
old_bw != new_bw
Remove the explicit checks for whether the bandwidth was below the
maximum DPRX bandwidth before and after the update, and rely on the
clamped bandwidth values instead.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-3-imre.deak@intel.com
During system resume, restoring the pre-suspend display state must not
fail. This requires preserving the sink capabilities from before
suspend, including the available link bandwidth.
If these capabilities are not preserved, the restore modeset may fail,
either due to a missing sink capability or insufficient link bandwidth
for the restored mode.
When the sink is connected through a DP tunnel, prevent such capability
changes by skipping tunnel state updates during resume. This also avoids
updating the sink state via the tunnel while it is being resumed.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-2-imre.deak@intel.com
