Add fields and constants for coreboot framebuffer orientation. Set
corebootdrm's DRM connector state from the values. Not all firmware
provides orientation, so make it optional. Systems without, continue
to use unknown orientation.
v3:
- comment on _HAS_ORIENTATION semantics (Tzung-Bi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-13-tzimmermann@suse.de
Add corebootdrm, a DRM driver for coreboot framebuffers. The driver
supports a pre-initialized framebuffer with various packed RGB formats.
The driver code is fairly small and uses the same logic as the other
sysfb drivers. Most of the implementation comes from existing sysfb
helpers.
Until now, coreboot relied on simpledrm or simplefb for boot-up graphics
output. Initialize the platform device for corebootdrm in the same place
in framebuffer_probe(). With a later commit, the simple-framebuffer should
be removed.
v4:
- sort include statements (Tzung-Bi)
v3:
- comment on _HAS_LFB semantics (Tzung-Bi)
- fix typo in commit description (Tzung-Bi)
- comment on simple-framebuffer being obsolete for coreboot
v2:
- reimplement as platform driver
- limit resources and mappings to known framebuffer memory; no
page alignment
- create corebootdrm device from coreboot framebuffer code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-12-tzimmermann@suse.de
Provide drm_sysfb_get_format(), a helper that finds a specific DRM
format from a list of pixel formats. The new function builds upon
drm_sysfb_get_format_si(), which finds the DRM format from a given
instance of struct screen_info. Now get the screen_info's pixel format
in the caller. Allows for matching pixel formats in drivers without
screen_info.
Convert the callers in efidrm and vesadrm to the new interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-11-tzimmermann@suse.de
Pack the fields in the coreboot table entries. These entries are part of
the coreboot ABI, so they don't follow regular calling conventions. Fields
of type u64 are aligned to boundaries of 4 bytes instead of 8. [1]
So far this has not been a problem. In the future, padding bytes should
be added where explicit alignment is required.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://github.com/coreboot/coreboot/blob/main/payloads/libpayload/include/coreboot_tables.h#L96 # [1]
Suggested-by: Julius Werner <jwerner@chromium.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260217155836.96267-10-tzimmermann@suse.de
Move types for coreboot table entries to <linux/coreboot.h>. Allows
drivers in other subsystems to use these structures.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-9-tzimmermann@suse.de
Include <linux/mod_devicetable.h> from source files and only forward-
declare struct coreboot_device_id in coreboot_table.h.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-8-tzimmermann@suse.de
Using module_init()/device_initcall() is too late to initialize
the coreboot bus, as there might already be drivers that depend
on it.
So far this hasn't been a problem, as coreboot controls all device
creation. Initializing the coreboot bus earlier in subsys_initcall()
will allow for external coreboot drivers to register themselves
with device_initcall(). Prepares coreboot to support additional
coreboot drivers from other subsystems.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-7-tzimmermann@suse.de
Use the PCI device as parent of the system-framebuffer device instead
of the coreboot device. Prevents SIGBUS or SIGSEG after hot-unplug of
the PCI device while the framebuffer is active.
The simple-framebuffer device depends on the PCI hardware, so this
device needs to be its parent. The current coreboot parent is no
longer needed after the system-framebuffer device has been created.
On systems without PCI or if no PCI parent device could be found,
the platform device hangs on the platform bus directly.
The fix here is similar to code in sysfb, which contained that same
bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-5-tzimmermann@suse.de
Initialize framebuffer memory resource with DEFINE_RES_MEM() instead
of open-coding the setup.
While at it, drop the resource name to make the kernel use the device
name of the simple-framebuffer device for the resource. The latter
includes a device number. While the meaning of the resource name is
somewhat fuzzy and varies across entries in /proc/iomem, showing the
device name seems more helpful than showing a fixed name.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-4-tzimmermann@suse.de
Remove the flag IORESOURCE_BUSY flag from coreboot's framebuffer
resource. It prevents simpledrm from successfully requesting the
range for its own use; resulting in errors such as
[ 2.775430] simple-framebuffer simple-framebuffer.0: [drm] could not acquire memory region [mem 0x80000000-0x80407fff flags 0x80000200]
As with other uses of simple-framebuffer, the simple-framebuffer
device should only declare it's I/O resources, but not actively use
them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 851b4c1453 ("firmware: coreboot: Add coreboot framebuffer driver")
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: chrome-platform@lists.linux.dev
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20260217155836.96267-3-tzimmermann@suse.de
The native driver takes over the framebuffer aperture by removing the
system- framebuffer platform device. Afterwards the pointer in drvdata
is dangling. Remove the entire logic around drvdata and let the kernel's
aperture helpers handle this. The platform device depends on the native
hardware device instead of the coreboot device anyway.
When commit 851b4c1453 ("firmware: coreboot: Add coreboot framebuffer
driver") added the coreboot framebuffer code, the kernel did not support
device-based aperture management. Instead native driviers only removed
the conflicting fbdev device. At that point, unregistering the framebuffer
device most likely worked correctly. It was definitely broken after
commit d9702b2a21 ("fbdev/simplefb: Do not use struct
fb_info.apertures"). So take this commit for the Fixes tag. Earlier
releases might work depending on the native hardware driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d9702b2a21 ("fbdev/simplefb: Do not use struct fb_info.apertures")
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hansg@kernel.org>
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v6.3+
Link: https://patch.msgid.link/20260217155836.96267-2-tzimmermann@suse.de
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration.
Fixes: e7447128ca ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the bind function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: b726970486 ("drm/bridge: synopsys: dw-dp: add bridge before attaching")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260206040621.4095517-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the probe function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: bf7e97910b ("drm/imx: parallel-display: add the bridge before attaching it")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260204090629.2209542-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The refactoring in commit 30984ccf31 ("rv: Refactor da_monitor to
minimise macros") replaced per-monitor unique variable names
(da_mon_##name) with a fixed name (da_mon_this).
While this works for 'static' variables (each translation unit gets its
own copy), DEFINE_PER_CPU internally generates a non-static dummy
variable __pcpu_unique_<n> for each per-cpu definition. The requirement
for this variable to be unique although static exists for modules on
specific architectures (alpha) and if the kernel is built with
CONFIG_DEBUG_FORCE_WEAK_PER_CPU (e.g. Fedora's debug kernel).
When multiple per-cpu monitors (e.g. sco and sts) are built-in
simultaneously, they all produce the same __pcpu_unique_da_mon_this
symbol, causing a link error:
ld: kernel/trace/rv/monitors/sts/sts.o: multiple definition of
`__pcpu_unique_da_mon_this';
kernel/trace/rv/monitors/sco/sco.o: first defined here
Fix this by introducing a DA_MON_NAME macro that expands to a
per-monitor unique name (da_mon_<MONITOR_NAME>) via the existing
CONCATENATE helper. This restores the uniqueness that was present
before the refactoring.
Fixes: 30984ccf31 ("rv: Refactor da_monitor to minimise macros")
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/20260216172707.1441516-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Increase event log size for GuC debug to 16MB, and for general debug
to 8MB. This allows for useful debug even if performance-affecting
DRM_XE_DEBUG_GUC is not enabled.
Without this change, GuC logs gathered by CI are useless for debug
due to limited size, which translates to time frame not even able
to cover cleanup after test.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260213140008.1473400-1-tomasz.lis@intel.com
The function try_lookup_noperm() can return an error pointer. Add check
for error pointer.
Detected by Smatch:
fs/proc/base.c:2148 proc_fill_cache() error:
'child' dereferencing possible ERR_PTR()
Fixes: 1df98b8bbc ("proc_fill_cache(): clean up, get rid of pointless find_inode_number() use")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260219221001.1117135-1-ethantidmore06@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf13586 ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
impl_list_item_mod.rs calls container_of! without unsafe blocks at a
couple of places. Since container_of! is unsafe, the blocks are strictly
necessary.
The problem was so far not visible because the "unsafe-op-in-unsafe-fn"
check is a lint rather than a hard compiler error, and Rust suppresses
lints triggered inside of a macro from another crate.
Thus, the error becomes only visible once someone from within the kernel
crate tries to use linked lists:
error[E0133]: call to unsafe function `core::ptr::mut_ptr::<impl *mut T>::byte_sub`
is unsafe and requires unsafe block
--> rust/kernel/lib.rs:252:29
|
252 | let container_ptr = field_ptr.byte_sub(offset).cast::<$Container>();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ call to unsafe function
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
|
note: an unsafe function restricts its caller, but its body is safe by default
--> rust/kernel/list/impl_list_item_mod.rs:216:13
|
216 | unsafe fn view_value(me: *mut $crate::list::ListLinks<$num>) -> *const Self {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
= note: requested on the command line with `-D unsafe-op-in-unsafe-fn`
= note: this error originates in the macro `$crate::container_of` which comes
from the expansion of the macro `impl_list_item`
Therefore, add unsafe blocks to container_of! calls to fix the issue.
[ As discussed, let's fix the build for those that want to use the
macro within the `kernel` crate now and we can discuss the proper
safety comments afterwards. Thus I removed the ones from the patch.
However, we cannot just avoid the comments with `CLIPPY=1`, so I
provided placeholders for now, like we did in the past. They were
also needed for an `unsafe impl`.
While I am not happy about it, it isn't worse than the current
status (the comments were meant to be there), and at least this
shows what is missing -- our pre-existing "good first issue" [1]
may motivate new contributors to complete them properly.
Finally, I moved one of the existing safety comments one line down
so that Clippy could locate it.
Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]
- Miguel ]
Cc: stable@vger.kernel.org
Fixes: c77f85b347 ("rust: list: remove OFFSET constants")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260216131613.45344-3-phasta@kernel.org
[ Fixed formatting. Reworded to fix the lint suppression
explanation. Indent build error. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Apply WA 18041344222 to Xe2 LPG graphics IP version 20.04 too.
Bspec: 56024
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/6e66746246439249a278f3d157f06071d83504b6.1770760591.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
There is a crash when unbinding the sja1105 driver under special
circumstances:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Call trace:
phylink_run_resolve_and_disable+0x10/0x90
sja1105_static_config_reload+0xc0/0x410
sja1105_vlan_filtering+0x100/0x140
dsa_port_vlan_filtering+0x13c/0x368
dsa_port_reset_vlan_filtering.isra.0+0xe8/0x198
dsa_port_bridge_leave+0x130/0x248
dsa_user_changeupper.part.0+0x74/0x158
dsa_user_netdevice_event+0x50c/0xa50
notifier_call_chain+0x78/0x148
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x58/0xa8
__netdev_upper_dev_unlink+0xac/0x220
netdev_upper_dev_unlink+0x38/0x70
del_nbp+0x1a4/0x320
br_del_if+0x3c/0xd8
br_device_event+0xf8/0x2d8
notifier_call_chain+0x78/0x148
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x58/0xa8
unregister_netdevice_many_notify+0x314/0x848
unregister_netdevice_queue+0xe8/0xf8
dsa_user_destroy+0x50/0xa8
dsa_port_teardown+0x80/0x98
dsa_switch_teardown_ports+0x4c/0xb8
dsa_switch_deinit+0x94/0xb8
dsa_switch_put_tree+0x2c/0xc0
dsa_unregister_switch+0x38/0x60
sja1105_remove+0x24/0x40
spi_remove+0x38/0x60
device_remove+0x54/0x90
device_release_driver_internal+0x1d4/0x230
device_driver_detach+0x20/0x38
unbind_store+0xbc/0xc8
---[ end trace 0000000000000000 ]---
which requires an explanation.
When a port offloads a bridge, the switch must be reset to change
the VLAN awareness state (the SJA1105_VLAN_FILTERING reason for
sja1105_static_config_reload()). When the port leaves a VLAN-aware
bridge, it must also be reset for the same reason: it is returning
to operation as a VLAN-unaware standalone port.
sja1105_static_config_reload() triggers the phylink link replay helpers.
Because sja1105 is a switch, it has multiple user ports. During unbind,
ports are torn down one by one in dsa_switch_teardown_ports() ->
dsa_port_teardown() -> dsa_user_destroy().
The crash happens when the first user port is not part of the VLAN-aware
bridge, but any other user port is.
Tearing down the first user port causes phylink_destroy() to be called
on dp->pl, and this pointer to be set to NULL. Then, when the second
user port is torn down, this was offloading a VLAN-aware bridge port, so
indirectly it will trigger sja1105_static_config_reload().
The latter function iterates using dsa_switch_for_each_available_port(),
and unconditionally dereferences dp->pl, including for the
aforementioned torn down previous port, and passes that to phylink.
This is where the NULL pointer is coming from.
There are multiple levels at which this could be avoided:
- add an "if (dp->pl)" in sja1105_static_config_reload()
- make the phylink replay helpers NULL-tolerant
- mark ports as DSA_PORT_TYPE_UNUSED after dsa_port_phylink_destroy()
has run, such that subsequent dsa_switch_for_each_available_port()
iterations skip them
- disconnect the entire switch at once from switchdev and
NETDEV_CHANGEUPPER events while unbinding, not just port by port,
likely using a "ds->unbinding = true" mechanism or similar
however options 3 and 4 are quite heavy and might have side effects.
Although 2 allows to keep the driver simpler, the phylink API it not
NULL-tolerant in general and is not responsible for the NULL pointer
(this is something done by dsa_port_phylink_destroy()). So I went
with 1.
Functionally speaking, skipping the replay helpers for ports without
a phylink instance is fine, because that only happens during driver
removal (an operation which cannot be cancelled). The ports are not
required to work (although they probably still will - untested
assumption - as long as we don't overwrite the last port speed with
SJA1105_SPEED_AUTO).
Fixes: 0b2edc531e ("net: dsa: sja1105: let phylink help with the replay of link callbacks")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260218160551.194782-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LAN7801 is designed exclusively for external PHYs (unlike the
LAN7800/LAN7850 which have internal PHYs), but lan78xx_mdio_init()
restricts PHY scanning to MDIO addresses 0-7 by setting phy_mask to
~(0xFF). This prevents discovery of external PHYs wired to addresses
outside that range.
One such case is the DP83TC814 100BASE-T1 PHY, which is typically
configured at MDIO address 10 via PHYAD bootstrap pins and goes
undetected with the current mask.
Remove the restrictive phy_mask assignment for the LAN7801 so that the
default mask of 0 applies, allowing all 32 MDIO addresses to be
scanned during bus registration.
Fixes: 02dc1f3d61 ("lan78xx: add LAN7801 MAC only support")
Signed-off-by: Martin Pålsson <martin@poleshift.se>
Link: https://patch.msgid.link/0110019c6f388aff-98d99cf0-4425-4fff-b16b-dea5ad8fafe0-000000@eu-north-1.amazonses.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eae ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260217175012.1234494-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync().
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc72451574 ("psp: provide encapsulation helper for drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+937b5bbb6a815b3e5d0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69949275.050a0220.2eeac1.0145.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260217161205.2079883-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dw_pcie_ep_set_bar() currently tears down existing inbound mappings only
when either the previous or the new struct pci_epf_bar uses submaps
(num_submap != 0). If both the old and new mappings are BAR Match Mode,
reprogramming the same ATU index is sufficient, so no explicit teardown
was needed.
However, some callers may reuse the same struct pci_epf_bar instance and
update it in place before calling set_bar() again. In that case
ep_func->epf_bar[bar] and the passed-in epf_bar can point to the same
object, so we cannot reliably distinguish BAR Match Mode -> BAR Match Mode
from Address Match Mode -> BAR Match Mode. As a result, the conditional
teardown based on num_submap becomes unreliable and existing inbound maps
may be left active.
Call dw_pcie_ep_clear_ib_maps() unconditionally before reprogramming the
BAR so that in-place updates are handled correctly.
This introduces a behavioral change in a corner case: if a BAR
reprogramming attempt fails (especially for the long-standing BAR Match
Mode -> BAR Match Mode update case), the previously programmed inbound
mapping will already have been torn down. This should be acceptable, since
the caller observes the error and should not use the BAR for any real
transactions in that case.
While at it, document that the existing update parameter check is
best-effort for in-place updates.
Fixes: cc839bef77 ("PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-3-den@valinux.co.jp
dw_pcie_ep_clear_ib_maps() first checks whether the inbound mapping for a
BAR is in BAR Match Mode (tracked via ep_func->bar_to_atu[bar]). Once
found, the iATU region is disabled and the bookkeeping is cleared.
BAR Match Mode and Address Match Mode mappings are mutually exclusive for a
given BAR, so there is nothing left for the Address Match Mode teardown
path to do after the BAR Match Mode mapping has been removed.
Return early after clearing the BAR Match Mode mapping to avoid running the
Address Match Mode teardown path. This makes the helper's intention
explicit and helps detect incorrect use of pci_epc_set_bar().
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-2-den@valinux.co.jp
Like some of the other endpoint modules, pci-epf-test now also uses
configfs, but is missing an indication in Kconfig:
arm-linux-gnueabi-ld: drivers/pci/endpoint/functions/pci-epf-test.o: in function `pci_epf_test_add_cfs':
pci-epf-test.c:(.text.pci_epf_test_add_cfs+0x2c): undefined reference to `config_group_init_type_name'
Select the symbol as needed.
Fixes: ffcc4850a1 ("PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180706.VtXkmtqL-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260211070812.4087119-1-arnd@kernel.org
pbus_size_mem_optional() adds dev_res->add_size of a bridge window into
children_add_size when the window has a non-optional part. However, if the
bridge window is fully optional, only r_size is added (which is zero for
such a window).
Also, a second dev_res entry will be added by pci_dev_res_add_to_list()
into realloc_head for the bridge window (resulting in triggering the
realloc_head-must-be-fully-consumed sanity check after a single pass of the
resource assignment algorithm):
WARNING: drivers/pci/setup-bus.c:2153 at pci_assign_unassigned_root_bus_resources+0xa5/0x260
Correct these problems by always adding dev_res->add_size for bridge
windows and not calling pci_dev_res_add_to_list() if the dev_res entry
exists.
Fixes: 6a5e64c75e ("PCI: Add pbus_mem_size_optional() to handle optional sizes")
Reported-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Link: https://patch.msgid.link/20260218223419.22366-1-ilpo.jarvinen@linux.intel.com
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Gregory Bell says:
====================
selftests/bpf: fix flaky build_id test
The build_id selftest intermittently fails with the following error:
./test_progs -t build_id/nofault-paged-out
serial_test_build_id:PASS:parse_build_id 0 nsec
subtest_nofault:PASS:skel_open 0 nsec
subtest_nofault:PASS:link 0 nsec
subtest_nofault:PASS:trigger_uprobe 0 nsec
subtest_nofault:PASS:res 0 nsec
subtest_nofault:FAIL:build_id_status unexpected build_id_status: actual 1 != expected 2
46/1 build_id/nofault-paged-out:FAIL
46 build_id:FAIL
397 stacktrace_build_id:OK
398 stacktrace_build_id_nmi:OK
On RHEL we consistently hit the reported failure on the first run of
the test following installation, after which subsequent runs pass.
This patch implements the approach discussed in the following thread:
https://lore.kernel.org/all/CAEf4BzYWVtfZh07iQm5Fo=kMm+8hgAu+rXRx1uLRHz07wc59+Q@mail.gmail.com/
Following the discussion, the fix makes the test verify eviction rather
than assuming it. In the discussion it was recommended to add a sleep before
and after the madvise operations, this did not resolve the issue in our case,
rather the test timed out every time. I was successful by retrying the
page-out sequence until the page is actually evicted.
Additionally, the mapping alignment is increased to
64K so the test operates on a properly page-aligned buffer across
supported architectures.
changelog:
- fixed indentations
- removed trailing whitespace
- add space between opening and closing brackets
====================
Link: https://patch.msgid.link/cover.1771338492.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some architectures require mappings to be aligned to the system page size.
The build_id selftest currently uses a smaller alignment, which can result
in madvise operations executing on a different page than intended.
Increase the mapping alignment to 64K so the buffer is page-aligned on
all supported architectures.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/93543253b32d1cb178ab6e31e4291e387ba1c372.1771338492.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The build_id selftest occasionally fails because MADV_PAGEOUT
does not guarantee the immediate eviction of the page. The test
assumes eviction happens and proceeds without verifying
that the page was actually reclaimed, leading to false test
failures.
Fix the test by retrying the page-out sequence until eviction
is successful, instead of relying on a single MADV_PAGEOUT attempt.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/038bd27c69dd3a16958894fcb19e4fb6fbfe317e.1771338492.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qSCj
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
-----BEGIN PGP SIGNATURE-----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=mb+y
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct gic_kvm_info", but the returned type,
while matching, is const qualified. To get them exactly matching, just
use the dereferenced pointer for the sizeof().
Link: https://patch.msgid.link/20260206223022.it.052-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "void **" but the returned type will be "void ***".
These are the same allocation size (pointer size), but the types do not
match. Adjust the allocation type to match the assignment.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206222151.work.016-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct dmz_mblock **" but the returned type will
be "struct dmz_mblk **". These are the same allocation size (pointer
size), but the types do not match. Adjust the allocation type to match
the assignment.
Link: https://patch.msgid.link/20250426061707.work.587-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct crypto_skcipher **" but the returned type
will be "struct crypto_aead **". These are the same allocation size
(pointer size), but the types don't match. Adjust the allocation type
to match the assignment.
Link: https://patch.msgid.link/20250426061629.work.266-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In commit 2ff5baa9b5 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
