Instead of relying on fixed relation to the display probe flag,
add configfs attribute to allow an administrator to configure
desired PF operation mode in a more flexible way.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260121214218.2817-6-michal.wajdeczko@intel.com
Instead of doing guesses each time during the runtime, set flag
admin_only once during PF's initialization.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260127210501.794-1-michal.wajdeczko@intel.com
The max_vfs parameter used by the Xe driver has its default value
definition, but it could be altered by the module parameter or by
the device specific configfs attribute.
To avoid mistakes or code duplication, always rely on the configfs
helper (or stub), which will provide necessary fallback if needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260121214218.2817-4-michal.wajdeczko@intel.com
For local includes we should use "" notation, not <>.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260121214218.2817-3-michal.wajdeczko@intel.com
We already have most of Xe defaults defined in xe_module.c,
where we use them for the modparam initializations, but some
were defined elsewhere, which breaks the consistency.
Introduce xe_defaults.h file, that will act as a placeholder
for all our default values, and can be used from other places.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260121214218.2817-2-michal.wajdeczko@intel.com
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275
Reported-by: syzbot+aac438d7a1c44071e04b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aac438d7a1c44071e04b
Fixes: 6c7410f449 ("gfs2: gfs2_freeze_lock_shared cleanup")
Fixes: b66f723bb5 ("gfs2: Improve gfs2_make_fs_rw error handling")
Link: https://lore.kernel.org/all/20260131062509.77974-1-kartikey406@gmail.com/T/ [v1]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack().
Fixes: b57180c75c ("arm64/gcs: Implement shadow stack prctl() interface")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Will Deacon <will@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:95:16: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
95 | .vbr_enable = 0,
| ^
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:90:16: note: previous initialization is here
90 | .vbr_enable = false,
| ^~~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:97:19: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
97 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:91:19: note: previous initialization is here
91 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:132:25: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
132 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:126:25: note: previous initialization is here
126 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:133:20: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
133 | .nfl_bpg_offset = 3511,
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:108:20: note: previous initialization is here
108 | .nfl_bpg_offset = 1402,
| ^~~~
GCC would warn about this in the same manner but its version,
-Woverride-init, is disabled for a normal kernel build in
scripts/Makefile.warn. For clang, -Wextra in drivers/gpu/drm/Makefile
turns it back but GCC respects turning it off earlier in the command
line.
Of all the duplicate fields in the initializer, only nfl_bpg_offset is a
different value. Clear up the duplicate initializers, keeping the
'false' value for .vbr_enable, as it is bool, and the second value for
.nfl_bpg_offset, assuming it is the correct one since it was the one
tested in the original change.
Fixes: 65ce1f5834 ("drm/panel: ilitek-ili9882t: Switch Tianma TL121BVMS07 to DSC 120Hz mode")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260114-panel-ilitek-ili9882t-fix-override-init-v1-1-1d69a2b096df@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke other
interrupt handlers and this supposed to happen from hard interrupt context.
Use IRQF_NO_THREAD to forbid forced-threading.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-21-bigeasy@linutronix.de
Add upper limit check for pixel clock for WCL.
For prior platforms though the bspec mentions the dotclock limits, however
these are intentionally not enforced to avoid regressions, unless real
issues are observed.
BSpec: 49199, 68912
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-18-ankit.k.nautiyal@intel.com
Add upper limit check for pixel clock for DISPLAY_VER >= 30.
Limits don't apply when DSC is enabled.
The helper returns the upper limit for the platforms, capped to the
max dotclock (khz).
For the currently supported versions of HDMI, pixel clock is already
limited to 600Mhz so nothing needs to be done there as of now.
v2:
- Add this limit to the new helper.
v3:
- Rename helper to intel_max_uncompressed_dotclock(). (Imre)
- Limit only for PTL and cap the limit to max_dotclock. (Imre)
BSpec: 49199, 68912
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-17-ankit.k.nautiyal@intel.com
Introduce for_each_joiner_candidate(), intel_dp_joiner_candidate_valid()
and intel_dp_joiner_candidate_valid() to remove duplicated joiner
enumeration and validity checks across DP SST and MST paths.
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-16-ankit.k.nautiyal@intel.com
Account for DSC slice overhead bubbles and adjust the pixel rate while
checking the pixel rate against the max dotclock limits.
v2: Add missing assignment for dsc_slice_count in
mst_connector_mode_valid_ctx(). (Imre)
v3: Explicitly pass dsc_slice_count as 0 for Non-DSC case. (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-15-ankit.k.nautiyal@intel.com
Make dsc_slice_count closer to the block where it is used and promote it
from u8 to int. This aligns it with upcoming DSC bubble pixel-rate
adjustments, where the slice count participates in wider arithmetic.
Currently, for non-eDP (DP/DP_MST) cases the slice count is computed only
inside intel_dp_dsc_mode_valid() and is not used by the caller. Once DSC
bubble handling is added, dp_mode_valid() will need access to its own local
slice count for non-eDP cases as well.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-14-ankit.k.nautiyal@intel.com
Add intel_dp_dotclk_valid() helper, that checks the required pixel rate
against platform dotclock limit. With joined pipes the effective dotclock
limit depends upon the number of joined pipes.
Call the helper from the mode_valid phase and from the compute_config
phase where we need to check the limits for the given target clock for a
given joiner candidate.
v2: Rename the helper to intel_dp_dotclk_valid(). (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-13-ankit.k.nautiyal@intel.com
The helpers intel_dp_num_joined_pipes() and intel_dp_needs_joiner() are no
longer used now that joiner selection iterates over all candidates.
Remove them.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-12-ankit.k.nautiyal@intel.com
Similar to the DP SST, refactor mst_stream_compute_config() to iterate
over joiner candidates and select the minimal joiner configuration that
satisfies the mode requirements. This prepares the logic for future changes
that will consider DSC slice overhead.
v2:
- Move the check for dotclock in the new helper and check for both DSC and
non-DSC case. In case the check fails for non-DSC, fallback to DSC
configuration. (Imre)
- Propagate the return value from the core helper:
mst_stream_compute_link_for_joined_pipes(). (Imre)
v3:
- Use num_joined_pipes instead of num_pipes. (Imre)
v4:
- Switch to 'ret == 0' for break condition to match SST code.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-11-ankit.k.nautiyal@intel.com
Move the joiner-dependent portion of mst_stream_compute_config() into
mst_stream_compute_link_for_joined_pipes(), which computes the MST link
configuration for a specific num_joined_pipes.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-10-ankit.k.nautiyal@intel.com
Refactor the logic to get the number of joined pipes. Start with a single
pipe and incrementally try additional pipes only if needed. While DSC
overhead is not yet computed here, this restructuring prepares the code to
support that in follow-up changes.
v2:
- Remove fallback in case force-joiner configuration fails. (Imre)
- Drop redundant MODE_OK assignment (Imre)
v3:
- Align with the changes in intel_dp_mode_valid(). (Imre)
v4:
- Set MODE_CLOCK_HIGH on DSC/rate failures aligning with SST case. (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-9-ankit.k.nautiyal@intel.com
Move the calculation of num_joined_pipes and other constraints that
depend on it, into a single block in mst_stream_compute_config().
This groups all joiner-dependent logic together, preparing the code for a
future loop-based evaluation of multiple joiner configurations.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-8-ankit.k.nautiyal@intel.com
Refactor the mode_valid to have all joiner dependent stuff together and
place the check for dotclock limit at the very end.
This will help in the following refactor to iterate over the joiner
candidates and find the best joiner candidate that satisfy all checks
and limits.
v2: Update status to MODE_CLOCK_HIGH if max_dotclock check fails. (Imre)
v3: Drop redundant MODE_OK assignment and return. (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-7-ankit.k.nautiyal@intel.com
Currently, the number of joined pipes are determined early in the flow,
which limits flexibility for accounting DSC slice overhead. To address
this, recompute the joined pipe count during DSC configuration.
Refactor intel_dp_dsc_compute_config() to iterate over joiner candidates
and select the minimal joiner configuration that satisfies the mode
requirements. This prepares the logic for future changes that will
consider DSC slice overhead.
v2:
- Rename helper to intel_dp_compute_link_for_joined_pipes(). (Imre)
- Move the check for max dotclock inside the helper so that if dotclock
check fails for non DSC case for a given number of joined pipes, we
are able to fallback to the DSC mode. (Imre)
v3:
- Drop fallback to other joiner configurations, if the force joiner
configuration fails. (Imre)
- Check for maxdotclock limit for non-DSC case first and fall back to
DSC if the check fails. (Imre)
- Initialize ret to -EINVAL to handle case where we bail out early.
(Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-6-ankit.k.nautiyal@intel.com
Currently in intel_dp_mode_valid(), we compute the number of joined pipes
required before deciding whether DSC is needed. This ordering prevents us
from accounting for DSC-related overhead when determining pipe
requirements.
It is not possible to first decide whether DSC is needed and then compute
the required number of joined pipes, because the two depend on each other:
- DSC need is a function of the pipe count (e.g., 4‑pipe always requires
DSC; 2‑pipe may require it if uncompressed joiner is unavailable).
- Whether a given pipe‑join configuration is sufficient depends on
effective bandwidth, which itself changes when DSC is used.
As a result, the only correct approach is to iterate candidate pipe counts.
So, refactor the logic to start with a single pipe and incrementally try
additional pipes only if needed. While DSC overhead is not yet computed
here, this restructuring prepares the code to support that in a follow-up
changes.
If a forced joiner configuration is present, we just check for that
configuration. If it fails, we bailout and return instead of trying with
other joiner configurations.
v2:
- Iterate over number of pipes to be joined instead of joiner
candidates. (Jani)
- Document the rationale of iterating over number of joined pipes.
(Imre)
v3:
- In case the force joiner configuration doesn't work, do not fallback
to the normal routine, bailout instead of trying other joiner
configurations. (Imre)
v4:
- Use num_joined_pipes instead of num_pipes. (Imre)
- Inititialize status before the loops starts. (Imre)
v5:
- Fix status handling by setting MODE_CLOCK_HIGH on DSC/rate failures.
(Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-5-ankit.k.nautiyal@intel.com
Separate out function to get the hdisplay limit for a given platform.
v2: Rename the helper to intel_dp_max_hdisplay_per_pipe(). (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-4-ankit.k.nautiyal@intel.com
Move the calculation of `num_joined_pipes` and other constraints that
depend on it, into a single block.
This groups all joiner-dependent logic together, preparing the code for a
future loop-based evaluation of multiple joiner configurations.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260202103731.357416-3-ankit.k.nautiyal@intel.com
Now there is no one utilizing that member, we can safely remove it along
with compressed_bio::nr_folios member. The size is reduced from 352 to
336 bytes on x86_64.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently only encoded writes utilized btrfs_submit_compressed_write(),
which utilized compressed_bio::compressed_folios[] array.
Change the only call site to call the new helper,
btrfs_alloc_compressed_write(), to allocate a compressed bio, then queue
needed folios into that bio, and finally call
btrfs_submit_compressed_write() to submit the compressed bio.
This change has one hidden benefit, previously we used
btrfs_alloc_folio_array() for the folios of
btrfs_submit_compressed_read(), which doesn't utilize the compression
page pool for bs == ps cases.
Now we call btrfs_alloc_compr_folio() which will benefit from the page pool.
The other obvious benefit is that we no longer need to allocate an array
to hold all those folios, thus one less error path.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_submit_compressed_read() still uses
compressed_bio::compressed_folios[] array.
Change it to allocate each folio and queue them into the compressed bio
so that we do not need to allocate that array.
Considering how small each compressed read bio is (less than 128KiB), we
do not benefit that much from btrfs_alloc_folio_array() anyway,
while we may benefit more from btrfs_alloc_compr_folio() by using
the global folio pool.
So changing from btrfs_alloc_folio_array() to btrfs_alloc_compr_folio()
in a loop should still be fine.
This removes one error path, and paves the way to completely remove
compressed_folios[] array.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since it's been replaced by btrfs_compress_bio(), remove all involved
functions.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This switch has the following benefits:
- A single structure to handle all compression
No more extra members like compressed_folios[] nor compress_type, all
those members.
This means the structure of async_extent is much smaller.
- Simpler error handling
A single cleanup_compressed_bio() will handle everything, no extra
compressed_folios[] array to bother.
Some extra notes:
- Compressed folios releasing
Now we go bio_for_each_folio_all() loop to release the folios of the
bio. This will work for both the old compressed_folios[] array and the
new pure bio method.
For old compressed_folios[], all folios of that array is queued into
the bio, thus releasing the folios from the bio is the same as
releasing each folio of that array. We just need to be sure no double
releasing from the array and bio.
For the new pure bio method, that array is NULL, just usual folio
releasing of the bio.
The only extra note is for end_bbio_compressed_read(), as the folios
are allocated using btrfs_alloc_folio_array(), thus the folios should
only be released by regular folio_put(), not btrfs_free_compr_folio().
- Rounding up the bio to block size
We cannot simply increase bi_size, as that will not increase the
length of the last bvec.
Thus we have to properly add the last part into the bio.
This will be done by the helper, round_up_last_block().
The reason we do not round those bios up at compression time is to get
the unaligned compressed size, so that they can be utilized for
inline extents.
If we round the bios up at *_compress_bio(), then every compressed bio
will be larger than or equal to one fs block, resulting no inline
compressed extent.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper will allocate a new compressed_bio, do the compression, and
return it to the caller.
This greatly simplifies the compression path, as we no longer need to
allocate a folio array thus no extra error path, furthermore the
compressed bio structure can be utilized for submission with very minor
modifications (like rounding up the bi_size and populate the bi_sector).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper has the following enhancements against the existing
zlib_compress_folios()
- Much smaller parameter list
No more shared IN/OUT members, no need to pre-allocate a
compressed_folios[] array.
Just a workspace and compressed_bio pointer, everything we need can be
extracted from that @cb pointer.
- Ready-to-be-submitted compressed bio
Although the caller still needs to do some common works like
rounding up and zeroing the tailing part of the last fs block.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper has the following enhancements against the existing
zstd_compress_folios()
- Much smaller parameter list
No more shared IN/OUT members, no need to pre-allocate a
compressed_folios[] array.
Just a workspace and compressed_bio pointer, everything we need can be
extracted from that @cb pointer.
- Ready-to-be-submitted compressed bio
Although the caller still needs to do some common works like
rounding up and zeroing the tailing part of the last fs block.
Overall the workflow is the same as zstd_compress_folios(), but with
some minor changes:
- @start/@len is now constant
For the current input file offset, use @start + @tot_in instead.
The original change of @start and @len makes it pretty hard to know
what value we're really comparing to.
- No more @cur_len
It's only utilized when switching input buffer.
Directly use btrfs_calc_input_length() instead.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper has the following enhancements against the existing
lzo_compress_folios()
- Much smaller parameter list
No more shared IN/OUT members, no need to pre-allocate a
compressed_folios[] array.
Just a workspace list header and a compressed_bio pointer.
Everything else can be fetched from that @cb pointer.
- Read-to-be-submitted compressed bio
Although the caller still needs to do some common works like
rounding up and zeroing the tailing part of the last fs block.
Some workloads are specific to lZO that is not needed with other
multi-run compression interfaces:
- Need to write a LZO header or segment header
Use the new write_and_queue_folio() helper to do the bio_add_folio()
call and folio switching.
- Need to update the LZO header after compression is done
Use bio_first_folio_all() to grab the first folio and update the header.
- Extra corner case of error handling
This can happen when we have queued part of a folio and hit an error.
In that case those folios will be released by the bio.
Thus we can only release the folio that has no queued part.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Separate btrfs_load_block_group_* calling path into a function, so that it
can be an entry point of unit test.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add auto-cleanup helper functions for btrfs_free_dummy_fs_info and
btrfs_free_dummy_block_group.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We allocate the bitmap but we never free it in free_raid_bio_pointers().
Fix this by adding a bitmap_free() call against the stripe_uptodate_bitmap
of a raid bio.
Fixes: 1810350b04 ("btrfs: raid56: move sector_ptr::uptodate into a dedicated bitmap")
Reported-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-btrfs/20260126045315.GA31641@lst.de/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I ran into another sort of trivial bug in v1 of the patch and concluded
that these functions really ought to be unit tested.
These two functions form the core of searching the chunk allocation
pending extent bitmap and have relatively easily definable semantics, so
unit testing them can help ensure the correctness of chunk allocation.
I also made a minor unrelated fix in volumes.h to properly forward
declare btrfs_space_info. Because of the order of the includes in the
new test, this was actually hitting a latent build warning.
Note:
This is an early example for me of a commit authored in part by an AI
agent, so I wanted to more clear about what I did. I defined a
trivial test and explained the set of tests I wanted to the agent and it
produced the large set of test cases seen here. I then checked each test
case to make sure it matched the description and simplified the
constants and numbers until they looked reasonable to me. I then checked
the looping logic to make sure it made sense to the original spirit of
the trivial test. Finally, carefully combed over all the lines it wrote
to loop over the tests it generated to make sure they followed our code
style guide.
Assisted-by: Claude:claude-opus-4-5
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319
[81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk
[81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE
[81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs]
[81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282
[81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000
[81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0
[81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007
[81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000
[81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000
[81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000
[81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0
[81.810] Call Trace:
[81.810] <TASK>
[81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs]
[81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs]
[81.811] kernfs_fop_write_iter+0x15f/0x240
[81.812] vfs_write+0x264/0x500
[81.812] ksys_write+0x6c/0xe0
[81.812] do_syscall_64+0x66/0x770
[81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[81.813] RIP: 0033:0x7fec6be66197
[81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197
[81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001
[81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000
[81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
[81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0
[81.817] </TASK>
[81.817] irq event stamp: 20039
[81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60
[81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60
[81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.820] ---[ end trace 0000000000000000 ]---
[81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists
Inspecting these aborts with drgn, I observed a pattern of overlapping
chunk_maps. Note how stripe 1 of the first chunk overlaps in physical
address with stripe 0 of the second chunk.
Physical Start Physical End Length Logical Type Stripe
----------------------------------------------------------------------------------------------------
0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2
0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2
Now how could this possibly happen? All chunk allocation is protected by
the chunk_mutex so racing allocations should see a consistent view of
the CHUNK_ALLOCATED bit in the chunk allocation extent-io-tree
(device->alloc_state as set by chunk_map_device_set_bits()) The tree
itself is protected by a spin lock, and clearing/setting the bits is
always protected by fs_info->mapping_tree_lock, so no race is apparent.
It turns out that there is a subtle bug in the logic regarding chunk
allocations that have happened in the current transaction, known as
"pending extents". The chunk allocation as defined in
find_free_dev_extent() is a loop which searches the commit root of the
dev_root and looks for gaps between DEV_EXTENT items. For those gaps, it
then checks alloc_state bitmap for any pending extents and adjusts the
hole that it finds accordingly. However, the logic in that adjustment
assumes that the first pending extent is the only one in that range.
e.g., given a layout with two non-consecutive pending extents in a hole
passed to dev_extent_hole_check() via *hole_start and *hole_size:
|----pending A----| real hole |----pending B----|
| candidate hole |
*hole_start *hole_start + *hole_size
the code incorrectly returns a "hole" from the end of pending extent A
until the passed in hole end, failing to account for pending B.
However, it is not entirely obvious that it is actually possible to
produce such a layout. I was able to reproduce it, but with some
contortions: I continued to use the force chunk allocation sysfs file
and I introduced a long delay (10 seconds) into the start of the cleaner
thread. I also prevented the unused bgs cleaning logic from ever
deleting metadata bgs. These help make it easier to deterministically
produce the condition but shouldn't really matter if you imagine the
conditions happening by race/luck. Allocations/frees can happen
concurrently with the cleaner thread preparing to process an unused
extent and both create some used chunks with an unused chunk
interleaved, all during one transaction. Then btrfs_delete_unused_bgs()
sees the unused one and clears it, leaving a range with several pending
chunk allocations and a gap in the middle.
The basic idea is that the unused_bgs cleanup work happens on a worker
so if we allocate 3 block groups in one transaction, then the cleaner
work kicked off by the previous transaction comes through and deletes
the middle one of the 3, then the commit root shows no dev extents and
we have the bad pattern in the extent-io-tree. One final consideration
is that the code happens to loop to the next hole if there are no more
extents at all, so we need one more dev extent way past the area we are
working in. Something like the following demonstrates the technique:
# push the BG frontier out to 20G
fallocate -l 20G $mnt/foo
# allocate one more that will prevent the "no more dev extents" luck
fallocate -l 1G $mnt/sticky
# sync
sync
# clear out the allocation area
rm $mnt/foo
sync
_cleaner
# let everything quiesce
sleep 20
sync
# dev tree should have one bg 20G out and the rest at the beginning..
# sort of like an empty FS but with a random sticky chunk.
# kick off the cleaner in the background, remember it will sleep 10s
# before doing interesting work
_cleaner &
sleep 3
# create 3 trivial block groups, all empty, all immediately marked as unused.
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev data)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
# let the cleaner thread definitely finish, it will remove the data bg
sleep 10
# this allocation sees the non-consecutive pending metadata chunks with
# data chunk gap of 1G and allocates a 2G extent in that hole. ENOSPC!
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
As for the fix, it is not that obvious. I could not see a trivial way to
do it even by adding backup loops into find_free_dev_extent(), so I
opted to change the semantics of dev_extent_hole_check() to not stop
looping until it finds a sufficiently big hole. For clarity, this also
required changing the helper function contains_pending_extent() into two
new helpers which find the first pending extent and the first suitable
hole in a range.
I attempted to clean up the documentation and range calculations to be
as consistent and clear as possible for the future.
I also looked at the zoned case and concluded that the loop there is
different and not to be unified with this one. As far as I can tell, the
zoned check will only further constrain the hole so looping back to find
more holes is acceptable. Though given that zoned really only appends, I
find it highly unlikely that it is susceptible to this bug.
Fixes: 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole")
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Closes: https://lore.kernel.org/linux-btrfs/q7760374-q1p4-029o-5149-26p28421s468@tzk.arg/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When trimming unallocated space, btrfs_trim_fs() holds the device_list_mutex
for the entire duration while iterating through all devices. On large
filesystems with significant unallocated space, this operation can take
minutes to hours on large storage systems.
This causes a problem because btrfs_run_dev_stats(), which is called
during transaction commit, also requires device_list_mutex:
btrfs_trim_fs()
mutex_lock(&fs_devices->device_list_mutex)
list_for_each_entry(device, ...)
btrfs_trim_free_extents(device)
mutex_unlock(&fs_devices->device_list_mutex)
commit_transaction()
btrfs_run_dev_stats()
mutex_lock(&fs_devices->device_list_mutex) // blocked!
...
While trim is running, all transaction commits are blocked waiting for
the mutex.
Fix this by refactoring btrfs_trim_free_extents() to process devices in
bounded chunks (up to 2GB per iteration) and release device_list_mutex
between chunks.
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a fatal signal is pending or the process is freezing,
btrfs_trim_block_group() and btrfs_trim_free_extents() return -ERESTARTSYS.
Currently this is treated as a regular error: the loops continue to the
next iteration and count it as a block group or device failure.
Instead, break out of the loops immediately and return -ERESTARTSYS to
userspace without counting it as a failure. Also skip the device loop
entirely if the block group loop was interrupted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When multiple block groups or devices fail during trim, preserve the
first error encountered rather than the last one. The first error is
typically more useful for debugging as it represents the original
failure, while subsequent errors may be cascading effects.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle
error better") intended to make device trimming continue even if one
device fails, tracking failures and reporting them at the end. However,
it used 'break' instead of 'continue', causing the loop to exit on the
first device failure.
Fix this by replacing 'break' with 'continue'.
Fixes: 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle error better")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to BUG_ON(), we can just abort the transaction and return
an error.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_remove_block_group() fails we abort the transaction in its
single caller (btrfs_remove_chunk()). This makes it harder to find out
where exactly the failure happened, as several steps inside
btrfs_remove_block_group() can fail.
So make btrfs_remove_block_group() abort the transaction whenever an
error happens, instead of aborting in its caller.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610] <TASK>
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643] </TASK>
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 04/01/2014
[87.8289] RIP: 0010:btrfs_update_root+0x296/0x790 [btrfs]
[87.8295] RSP: 0018:ffffa58d035dfd60 EFLAGS: 00010282
[87.8297] RAX: ffff9a59126ddb68 RBX: ffff9a59126dc000 RCX: 0000000000000000
[87.8299] RDX: 0000000000000000 RSI: 00000000ffffff8b RDI: ffffffffc0b28270
[87.8301] RBP: ffff9a5904aec000 R08: 0000000000000000 R09: 00000000ffffefff
[87.8303] R10: ffffffff9ac8c200 R11: ffffffff9ace4200 R12: 0000000000000001
[87.8305] R13: ffff9a59041740e8 R14: ffff9a5904aec1f7 R15: ffff9a590fdefaf0
[87.8307] FS: 00007f54cde6b740(0000) GS:ffff9a5b5a81c000(0000) knlGS:0000000000000000
[87.8309] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[87.8310] CR2: 00007f54cde403cc CR3: 0000000112902004 CR4: 0000000000370ef0
[87.8312] Call Trace:
[87.8313] <TASK>
[87.8314] ? _raw_spin_unlock+0x23/0x40
[87.8315] commit_cowonly_roots+0x1ad/0x250 [btrfs]
[87.8317] ? btrfs_commit_transaction+0x79b/0x1560 [btrfs]
[87.8320] btrfs_commit_transaction+0x8aa/0x1560 [btrfs]
[87.8322] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[87.8325] __iterate_supers+0xf1/0x170
[87.8326] ? __pfx_sync_fs_one_sb+0x10/0x10
[87.8327] ksys_sync+0x63/0xb0
[87.8328] __do_sys_sync+0xe/0x20
[87.8329] do_syscall_64+0x73/0x450
[87.8330] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[87.8331] RIP: 0033:0x7f54cdd05d2b
[87.8336] RSP: 002b:00007fff1b58ff78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a2
[87.8338] RAX: ffffffffffffffda RBX: 00007fff1b590158 RCX: 00007f54cdd05d2b
[87.8340] RDX: 00007f54cde02301 RSI: 00007fff1b592b66 RDI: 00007f54cddba90d
[87.8342] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[87.8344] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e07ca96b80
[87.8346] R13: 000055e07ca9519f R14: 00007f54cddfa434 R15: 000055e07ca95034
[87.8348] </TASK>
[87.8348] irq event stamp: 0
[87.8349] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[87.8351] hardirqs last disabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8353] softirqs last enabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8355] softirqs last disabled at (0): [<0000000000000000>] 0x0
[87.8357] ---[ end trace 0000000000000000 ]---
[87.8358] BTRFS: error (device nvme1n1 state A) in btrfs_update_root:153: errno=-117 Filesystem corrupted
[87.8360] BTRFS info (device nvme1n1 state EA): forced readonly
[87.8362] BTRFS warning (device nvme1n1 state EA): Skipping commit of aborted transaction.
[87.8364] BTRFS: error (device nvme1n1 state EA) in cleanup_transaction:2037: errno=-117 Filesystem corrupted
Since the block group tree was pulled out of the extent tree and uses
normal root dirty tracking, remove the offending extra list_add. This
fixes the list corruption and the resulting fs corruption.
Fixes: 14033b08a0 ("btrfs: don't save block group root into super block")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When a btrfs_bio gets split, only 'bbio->csum_search_commit_root' gets
copied to the new btrfs_bio, all the other flags don't.
When a bio is split in btrfs_submit_chunk(), btrfs_split_bio() creates
the new split bio via btrfs_bio_init() which zeroes the struct with
memset. Looking at btrfs_split_bio(), it copies csum_search_commit_root
from the original but does not copy can_use_append.
After the split, the code does:
bbio = split;
bio = &bbio->bio;
This means the split bio (with can_use_append = false) gets submitted,
not the original. In btrfs_submit_dev_bio(), the condition:
if (btrfs_bio(bio)->can_use_append && btrfs_dev_is_sequential(...))
Will be false for the split bio even when writing to a sequential zone.
Does the split bio need to inherit can_use_append from the original? The
old code used a local variable use_append which persisted across the
split.
Copy the rest of the flags as well.
Link: https://lore.kernel.org/linux-btrfs/20260125132120.2525146-1-clm@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_load_block_group_dup() has a local pointer to fs_info, yet the
error prints dereference fs_info from the block_group.
Use local fs_info variable to make the code more uniform.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
