Since commit b3cf07851b ("arm64: entry: Switch to generic IRQ
entry"), _TIF_WORK_MASK is never used, so remove it.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
In the 7th generation of the SoC from Aspeed, the control logic of the
SGPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin's
value, interrupt type, and other settings.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-6-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The AST2700 is the 7th generation SoC from Aspeed, featuring two SGPIO
master controllers: both with 256 serial inputs and outputs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-5-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Update aspeed_sgpio_irq_handler() and aspeed_sgpio_setup_irqs() to use
the llops callbacks for register access instead of direct iowrite32().
This creates a unified hardware access layer, which is essential for
supporting SoCs with different register layouts like the AST2700.
Additionally, change the loop bounds to use ngpio instead of the static
ARRAY_SIZE(aspeed_sgpio_banks). This allows the driver to adapt to the
actual number of supported pins on the running SoC.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-4-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add low-level operations (llops) to abstract the register access for SGPIO
registers. With this abstraction layer, the driver can separate the
hardware and software logic, making it easier to extend the driver to
support different hardware register layouts.
The llops abstraction changes the programming semantics from bitmask-based
writes to a value-based interface.
Instead of passing a pre-shifted bitmask to the caller, the driver now
passes:
- the GPIO offset, and
- the value to be set (0 or 1),
and the llops helpers are responsible for deriving the correct register
and bit position internally.
As a result, assignments such as:
type0 = 1;
type1 = 1;
type2 = 1;
do not represent a behavioral change. They indicate that the bit
corresponding to the given GPIO offset should be set, with the actual
bit manipulation handled by llops.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-3-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Drops the names array from the bank struct and its initializers, as it is
unused in the driver.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-2-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our SGPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-1-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Currently, in rcar_mipi_dsi_parameters_calc(), the VCLK divider is stored
in setup_info structure as BIT(divider). The rcar_mipi_dsi_parameters_calc()
is called at the early beginning of rcar_mipi_dsi_startup() function. Later,
in the same rcar_mipi_dsi_startup() function, the stored BIT(divider) value
is passed to __ffs() to calculate back the divider out of the value again.
Factor out VCLK divider calculation into rcar_mipi_dsi_vclk_divider()
function and call the function from both rcar_mipi_dsi_parameters_calc()
and rcar_mipi_dsi_startup() to avoid this back and forth BIT() and _ffs()
and avoid unnecessarily storing the divider value in setup_info at all.
This rework has a slight side-effect, in that it should allow the compiler
to better evaluate the code and avoid compiler warnings about variable
value overflows, which can never happen.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512051834.bESvhDiG-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512222321.TeY4VbvK-lkp@intel.com/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260105175250.64309-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
* Add Nova Lake to the list of supported platforms by platform driver
* Update Kconfig help text to clarify which drivers supports which platforms
* Convert more Intel pin control drivers to use intel_gpio_add_pin_ranges()
-----BEGIN PGP SIGNATURE-----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=ReWs
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.20-1
* Add Nova Lake to the list of supported platforms by platform driver
* Update Kconfig help text to clarify which drivers supports which platforms
* Convert more Intel pin control drivers to use intel_gpio_add_pin_ranges()
Signed-off-by: Linus Walleij <linusw@kernel.org>
The trailing '0' character of the 'usb32_drvvbus0' pin group got removed
during converting the bindings to DT schema.
$ git grep -n usb32_drvvbus v6.18
v6.18:Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt:106:group usb32_drvvbus0
v6.18:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
$ git grep -n usb32_drvvbus v6.19-rc1
v6.19-rc1:Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml:91: usb2_drvvbus1, usb32_drvvbus ]
v6.19-rc1:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
Add it back to match the group name with the one the driver expects.
Fixes: c1c9641a04 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-12-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-11-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-10-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-9-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-8-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These functions are reused by the VM tests to collect and compare dmesg
warnings and oops counts. The future VM-specific tests use them heavily.
This patches relies on vm_ssh() already supporting namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-7-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-6-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add functions for initializing namespaces with the different vsock NS
modes. Callers can use add_namespaces() and del_namespaces() to create
namespaces global0, global1, local0, and local1.
The add_namespaces() function initializes global0, local0, etc... with
their respective vsock NS mode by toggling child_ns_mode before creating
the namespace.
Remove namespaces upon exiting the program in cleanup(). This is
unlikely to be needed for a healthy run, but it is useful for tests that
are manually killed mid-test.
This patch is in preparation for later namespace tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-5-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Increase the timeout from 300s to 1200s. On a modern bare metal server
my last run showed the new set of tests taking ~400s. Multiply by an
(arbitrary) factor of three to account for slower/nested runners.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-4-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add netns support to loopback and vhost. Keep netns disabled for
virtio-vsock, but add necessary changes to comply with common API
updates.
This is the patch in the series when vhost-vsock namespaces actually
come online.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-3-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Associate reply packets with the sending socket. When vsock must reply
with an RST packet and there exists a sending socket (e.g., for
loopback), setting the skb owner to the socket correctly handles
reference counting between the skb and sk (i.e., the sk stays alive
until the skb is freed).
This allows the net namespace to be used for socket lookups for the
duration of the reply skb's lifetime, preventing race conditions between
the namespace lifecycle and vsock socket search using the namespace
pointer.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-2-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add netns logic to vsock core. Additionally, modify transport hook
prototypes to be used by later transport-specific patches (e.g.,
*_seqpacket_allow()).
Namespaces are supported primarily by changing socket lookup functions
(e.g., vsock_find_connected_socket()) to take into account the socket
namespace and the namespace mode before considering a candidate socket a
"match".
This patch also introduces the sysctl /proc/sys/net/vsock/ns_mode to
report the mode and /proc/sys/net/vsock/child_ns_mode to set the mode
for new namespaces.
Add netns functionality (initialization, passing to transports, procfs,
etc...) to the af_vsock socket layer. Later patches that add netns
support to transports depend on this patch.
This patch changes the allocation of random ports for connectible vsocks
in order to avoid leaking the random port range starting point to other
namespaces.
dgram_allow(), stream_allow(), and seqpacket_allow() callbacks are
modified to take a vsk in order to perform logic on namespace modes. In
future patches, the net will also be used for socket
lookups in these functions.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-1-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DMABUF_MOVE_NOTIFY was introduced in 2018 and has been marked as
experimental and disabled by default ever since. Six years later,
all new importers implement this callback.
It is therefore reasonable to drop CONFIG_DMABUF_MOVE_NOTIFY and
always build DMABUF with support for it enabled.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260124-dmabuf-revoke-v5-3-f98fca917e96@nvidia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Along with renaming the .move_notify() callback, rename the corresponding
dma-buf core function. This makes the expected behavior clear to exporters
calling this function.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260124-dmabuf-revoke-v5-2-f98fca917e96@nvidia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Rename the .move_notify() callback to .invalidate_mappings() to make its
purpose explicit and highlight that it is responsible for invalidating
existing mappings.
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20260124-dmabuf-revoke-v5-1-f98fca917e96@nvidia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Use the devm_fwnode_gpiod_get_optional variant to simplify the error
handling code.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20260126-gpio-devm_fwnode_gpiod_get_optional-v2-2-ec34f8e35077@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The helper makes it easier to handle optional GPIOs and simplifies the
error handling code.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20260126-gpio-devm_fwnode_gpiod_get_optional-v2-1-ec34f8e35077@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.
Reported-by: Abel Vesa <abelvesa@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD
Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Lan9645x is the first chip supported by this driver where the pin stride
is different from the alt mode stride. With 51 pins and up to 7 alt
modes, we have stride = 2 and alt_mode_stride = 3.
The current REG_ALT macro has the implicit assumption that these numbers
are equal, so it does not work for lan9645x.
The pin stride is the 'stride' variable in the driver. It is the size
of certain register groups which depends on the number of pins supported
by the device. Generally we have stride = DIV_ROUND_UP(npins, 32). E.g:
GPIO_OUT_SET0
GPIO_OUT_SET1
...
GPIO_OUT_SETn
The alt mode registers are further replicated by the number of bits
necessary to represent the alt mode. For instance if we need 3 bits to
represent the alt mode:
GPIO_ALT0[0-2]
GPIO_ALT1[0-2]
To set alt mode 3 on pin 12, it is necessary to perform writes
GPIO_ALT0[0] |= BIT(12)
GPIO_ALT0[1] |= BIT(12)
GPIO_ALT0[2] &= ~BIT(12)
The stride and alt mode stride are used by the REG_ALT macro to
calculate the alt mode register address for a given pin.
This adds the option to specify n_alt_modes, which is used to set
info->altm_stride. The default value is info->stride, to make sure
existing devices are unaffected by this change.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add documentation for the compatibles designated for the following SKUs
in the LAN9645x family:
lan96455f
lan96457f
lan96459f
with fallback a compatible for the smallest 5-ported SKUs lan96455f.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89 ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The MT798x series SoCs have IES regiter definitions. I think we
must enable the ies_present flag to correctly configure the pin
input mode.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add mixer control support for the Focusrite Forte (USB ID 0x1235:0x8010),
an older USB audio interface that predates the Scarlett 2nd generation.
The Forte uses UAC2_CS_MEM (bRequest=0x03) for its input controls rather
than the standard UAC2_CS_CUR (0x01) used by Scarlett devices. This patch
adds Forte-specific control handlers that use the correct USB protocol.
Features implemented:
- Input source selection (Mic/Line/Inst) for both channels
- High pass filter switch
- 48V phantom power switch
- Phase invert switch
- Pad switch
- Preamp gain control (0-42 range, ~0-75dB)
- Matrix mixer controls (6 inputs x 4 outputs)
- Output volume and mute controls
The device is registered via mixer_quirks.c and uses the existing
mixer_scarlett.c infrastructure with Forte-specific additions.
Credit: This work builds on prior reverse-engineering by alastair-dm.
Link: https://github.com/alastair-dm/forte-mixer/wiki
Link: https://github.com/alastair-dm/forte-mixer
Link: https://github.com/jopdorp/forte-mixer
Signed-off-by: Jegor van Opdorp <jegorvanopdorp@gmail.com>
Link: https://patch.msgid.link/20260127081541.219669-1-jegorvanopdorp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset microphone on the MECHREVO Wujie 15X Pro requires the
CXT_FIXUP_HEADSET_MIC quirk to function properly. Add the PCI SSID
(0x1d05:0x3012) to the quirk table.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-5-550230171hxy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default of tas2781_hda::catlog_id is DELL, which cause calibration
data is not loaded in HP SPI-basded Laptop, because only HP laptop
supports SPI-based TAS2781.
Fixes: 9fa6a693ad ("ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260126031816.1123-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If appending " Jack" is not necessary, replace snprintf("%s", ...) with
the faster strscpy().
Additionally, rename 'need_cat' to the clearer 'append_suf', use local
variables for the suffix and its length, remove the confusing comment,
compare strncmp() to 0, and use 'size_t' for the 'size' function
parameter.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260125155159.98720-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LG Gram Style 14 (14Z90RS-G.AD77F, SSID 1854:0490) with Realtek ALC298
shows normal routing and volume changes, but internal speakers stay silent
unless a userland HDA-verb workaround is applied.
Add a dedicated quirk for the LG Gram Style 14 that programs the codec
coefficient sequence used by the known workaround and enables the speaker
amps only during playback.
Tested-by: Damien Dagorn <damien.dagorn29@gmail.com>
Signed-off-by: Damien Dagorn <damien.dagorn29@gmail.com>
Link: https://lore.kernel.org/CAN59QMUhd4kHrkRoJA6VzEr2VKezN2yjHnANaQoZn2-Bnwe3bQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In scmi_cpu_domain_id(), it does not release the reference.
Fixes: e336baa419 ("cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreq")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add CPUFreq support for the AM62L3 SoC with the appropriate
AM62L3 speed grade constants according to the datasheet [1].
This follows the same architecture-specific implementation pattern
as other TI SoCs in the AM6x family.
While at it, also sort instances where the SOC family names
were not sorted alphabetically.
[1] https://www.ti.com/lit/pdf/SPRSPA1
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add AM62L3 SoC to the dt-platdev blocklist to ensure proper handling
of CPUFreq functionality. The AM62L3 will use its native TI CPUFreq
driver implementation instead of the generic dt-platdev driver.
This follows the same pattern as other TI SoCs like AM62A7, AM62D2,
and AM62P5 which have been previously added to this blocklist.
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add comment explaining why nominal_perf is used for MinPerf when the
CPU frequency policy is set to CPUFREQ_POLICY_PERFORMANCE, rather than
using highest_perf or lowest_nonlinear_perf.
Signed-off-by: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SCMI stands for System Control and Management Interface, not System Control
and Power Interface -- apparently, Sudeep Holla copied this line from his
SCPI driver and then just forgot to update the acronym explanation... :-)
Fixes: 99d6bdf338 ("cpufreq: add support for CPU DVFS based on SCMI message protocol")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a number of QC platforms to the blocklist, they all use either the
qcom-cpufreq-hw driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Rename `as_ref` and `as_mut_ref` to `from_raw` and `from_raw_mut` to
align with the established naming convention for constructing types
from raw pointers in the kernel's Rust codebase.
Signed-off-by: Yilin Chen <1479826151@qq.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, the CPPC Frequency Invariance Engine (FIE) is invoked from the
scheduler tick but defers the update of arch_freq_scale to a separate
thread because cppc_get_perf_ctrs() would sleep if the CPC regs are in PCC.
However, this deferred update mechanism is unnecessary and introduces extra
overhead for non-PCC register spaces (e.g. System Memory or FFH), where
accessing the regs won't sleep and can be safely performed from the tick
context.
Furthermore, with the CPPC FIE registered, it throws repeated warnings of
"cppc_scale_freq_workfn: failed to read perf counters" on our platform with
the CPC regs in System Memory and a power-down idle state enabled. That's
because the remote CPU can be in a power-down idle state, and reading its
perf counters returns 0. Moving the FIE handling back to the scheduler
tick process makes the CPU handle its own perf counters, so it won't be
idle and the issue would be inherently solved.
To address the above issues, update arch_freq_scale directly in ticks for
non-PCC regs and keep the deferred update mechanism for PCC regs.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Factor out the CPPC FIE kworker init in cppc_freq_invariance_init() because
it's a standalone procedure for use when the CPC regs are in PCC channels.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Factor out cppc_perf_ctrs_in_pcc_cpu() for checking whether per-cpu CPC
regs are defined in PCC channels, and export it out for further use.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
