Add support for V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD and
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE controls.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for V4L2_CID_HFLIP and V4L2_CID_VFLIP controls in encoder.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add rotation control for encoder, enabling V4L2_CID_ROTATE and handling
90/180/270 degree rotation.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add members enc_scale_width, enc_scale_height to the struct iris_inst to
support scale requirements.
Add output width and height settings in iris_venc_s_fmt_output to
enable scaling functionality.
Add VPSS buffer to platform data, which the scale function requires.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The setting of HFI_PROP_CROP_OFFSETS for the OUTPUT port is correct,
but on the CAPTURE port it is used to inform the firmware about the
region of interest, so crop_offset needs to be handled accordingly.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add members enc_raw_width, enc_raw_height to the struct iris_inst to
support codec alignment requirements.
HFI_PROP_RAW_RESOLUTION needs to be set to the actual YUV resolution.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The message for attempting to set already configured input or output
parameter subscribe change properties is not an error condition.
Move it from error to debug level and make it more descriptive by
indicating which specific input or output psc was already set.
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
As we get ready for kzalloc checking for invalid sizes, let's add
documentation for the cases where the size is different but valid.
This patch fixes this cocci warning:
./platform/qcom/iris/iris_hfi_gen2_command.c:1215:9-25: WARNING: casting value returned by memory allocation function to (struct iris_inst *) is useless.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During the rework of the fan behavior control code in commit
d8e8362b09 ("platform/x86: acer-wmi: Fix setting of fan behavior"),
acer_toggle_turbo() was changed to use WMID_gaming_set_fan_behavior()
instead of WMID_gaming_set_u64() when switching the fans to turbo
mode. The new function however does not check if the necessary
capability (ACER_CAP_TURBO_FAN) is actually enabled on a given
machine, causing the driver to potentially access unsupported
features.
Fix this by manually checking if ACER_CAP_TURBO_FAN is enabled
on a given machine before changing the fan mode.
Cc: stable@vger.kernel.org
Fixes: d8e8362b09 ("platform/x86: acer-wmi: Fix setting of fan behavior")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260108164716.14376-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Just the one change from Randy dropping an unused Kconfig symbol.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCaWmPcxwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmrykA/2ehXbhICPcONzQ0kLZB
yWsRyAGkDmaKTmAxTcpw2G9RAQDJox3bEMWQ6xKj0WVrRgG3PB1r6BIkI3AdCDjt
BSl/DQ==
=M1VA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fKjH
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-arm-6.19-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
Nuvoton NPCM Arm fixes for v6.19
Just the one change from Randy dropping an unused Kconfig symbol.
* tag 'nuvoton-arm-6.19-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
arm: npcm: drop unused Kconfig ERRATA symbol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nuvoton's NPCM SoCs are part of their iBMC product line[1]. NPCM arch
patches have historically gone through Joel's tree along with ASPEED
changes due to their relevance to OpenBMC. Commit df5e674c7a
("MAINTAINERS: Switch ASPEED tree to shared BMC repository") does what
it says on the tin - we now have bmc/linux.git on git.kernel.org, and
I've picked up the maintainer role for it.
Document that I'm continuing to apply NPCM arch patches from the
openbmc@ list to the BMC tree for PRs to the SoC tree.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Drew Fustini <fustini@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tali Perry <tali.perry1@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Link: https://www.nuvoton.com/products/cloud-computing/ibmc/ [1]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for rk801 to the existing rk808 regulator driver.
It provides 4 BUCK, 2 LDO and 1 SWITCH.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260112124351.17707-4-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
The RK801 is a Power Management IC (PMIC) for multimedia
and handheld devices. It contains the following components:
- 4 BUCK
- 2 LDO
- 1 SWITCH
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Link: https://patch.msgid.link/20260112124351.17707-3-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add TDP data for laptop model GA403WW.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Model GA403WM appears after GA403WR breaking the alphabetical order:
swap theirs position.
Fixes: f5fc40734b ("platform/x86: asus-armoury: add support for GA403WM")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G835L.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ppt_pl3_fppt_def and ppt_pl3_fppt_max are wrong: correct it.
Fixes: a22d893f49 ("platform/x86: asus-armoury: add support for FA608UM")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp-bioscfg has a MODULE_DEVICE_TABLE with a GUID in it that looks
plausible, but the module doesn't automatically load on applicable
systems.
This is because the GUID has some lower case characters and so it
doesn't match the modalias during boot. Update the GUIDs to be all
uppercase.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/68a2decc.050a0220.e29e5.0099.GAE@google.com/
Reported-by: syzbot+4eb282331cab6d5b6588@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Once the aggrprobe is fully reverted in do_free_cleaned_kprobes(), retry
optimize_kprobe() on that sibling so it can return to OPTIMIZED.
Also remove the stale comment in __disarm_kprobe().
Link: https://lore.kernel.org/all/349359900266B25F+20260115023804.3951960-2-hongao@uniontech.com/
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add DT binding document for Rockchip's RK801 PMIC
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112124351.17707-2-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
Change the size of the reg register to 0x1000 to match the hardware.
This register range covers the IO power domain's register addresses.
The IO power domain registers are protected. In order to access the
protected IO power domain registers, a valid unlock sequence must be
performed by writing the required keys to the AIB Secure Access Register
(ASAR).
The ASAR register resides within the APBC register address space.
A corresponding syscon property `spacemit,apbc` is added to allow
the pinctrl driver to access this register.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260108-kx-pinctrl-aib-io-pwr-domain-v2-3-6bcb46146e53@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
K3 Pico-ITX is a 2.5-inch single-board computer equipted with a SpacemiT
K3 SoC.
This minimal device tree enables booting into a serial console with UART
output.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-7-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant.
Add nodes of uarts, timer and interrupt-controllers. Also add M-mode
APLIC (maplic) and IMSIC (mimsic) nodes to represent the hardware
topology and ready for potential firmware usage.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-6-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Add DT binding documentation for the SpacemiT K3 SoC and the board Pico-ITX
which is a 2.5-inch single-board computer.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-5-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Add compatible string for the SpacemiT X100 core. [1]
The X100 is a 64-bit RVA23-compliant RISC-V core from SpacemiT. X100
supports the RISC-V vector and hypervisor extensions and all mandatory
extersions as required by the RVA23U64 and RVA23S64 profiles, per the
definition in 'RVA23 Profile, Version 1.0'. [2]
From a microarchieture viewpoint, the X100 features a 4-issue
out-of-order pipeline.
X100 is used in SpacemiT K3 SoC.
Acked-by: Paul Walmsley <pjw@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://www.spacemit.com/en/spacemit-x100-core/ [1]
Link: https://docs.riscv.org/reference/profiles/rva23/_attachments/rva23-profile.pdf [2]
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-1-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
"b" is ratified (Apr/2024) much later than its components zba/zbb/zbs
(Jun/2021). With "b" added into riscv/extensions.yaml, a dependency
checking rule is now enforced, which requires that when zba, zbb, and zbs
are all specified, "b" must be added as well. Failing to do this will
cause dtbs_check schema check warnings.
According to uabi.rst, as a single-letter extension, "b" should be added
after "c" in canonical order.
Update k1.dtsi to conform to this rule.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260115-adding-b-dtsi-v2-4-254dd61cf947@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Enable the DWC3 USB 3.0 controller and its associated usbphy2 on the
Banana Pi F3 board.
The board utilizes a VLI VL817 hub, which requires two separate power
supplies: one VBUS and one for hub itself. Add two GPIO-controlled
fixed-regulators to manage this.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-3-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Add node for the Synopsys DWC3 USB 3.0 host controller on the K1 SoC.
The controller resides on the 'storage-bus' and uses its DMA
translations.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-2-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
K1's DWC3 USB 3.0 controller requires two separate PHYs to function:
the USB 3.0 combophy (for SuperSpeed) and a USB 2.0 PHY (for High-Speed,
Full-Speed, etc.).
Add node for this second USB 2.0 PHY (usbphy2).
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-1-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
O_ is interpreted as a broken hyperlink target. Escape _ with a backslash.
The asterisk in "struct file *" is interpreted as an opening emphasis
string that never closes. Replace double quotes with rST backticks.
Change "a ERR_PTR" to "an ERR_PTR".
Signed-off-by: Jay Winston <jaybenjaminwinston@gmail.com>
Link: https://patch.msgid.link/20260118110401.2651-1-jaybenjaminwinston@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done. Also switch to the drm_bridge::next_bridge pointer.
This needs to handle both cases: when of_drm_find_panel() succeeds and when
it fails.
In the 'else' case (i.e. when of_drm_find_panel() fails), just switch to
of_drm_find_and_get_bridge() to ensure the bridge is not freed while in use
in the function tail, when it is stored in dsi->bridge.next_bridge.
In the 'then' case (i.e. when of_drm_find_panel() succeeds),
devm_drm_panel_bridge_add() already increments the refcount using devres
which ties the bridge allocation lifetime to the device lifetime, so we
would not need to do anything. However to have the same behaviour in both
branches take an additional reference here, so that the bridge needs to be
put whichever branch is taken without more complicated logic. Ensure to
clear the bridge pointer however, to avoid calling drm_bridge_put() on an
ERR_PTR.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-12-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
Stop using IS_ERR(next_bridge) as an indication of an error, and instead
use the 'ret' integer.
No functional change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-11-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
As a preliminary cleanup, add a temporary local 'next_bridge' pointer and
only copy it in dsi->out_bridge as late as possible, i.e. just before
calling pdata->host_ops->attach() which uses it (only in the exynos
driver).
Not strictly needed, but for symmetry move the clearing of dsi->out_bridge
in samsung_dsim_host_detach() to after pdata->host_ops->detach().
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-10-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Since the companion bridge pointer is used by many bridge funcs, putting
its reference in the remove function would be dangerous. Use .destroy to
put it on final deallocation.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-9-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
