For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the config attribute that's published by the driver instead of
hard coding "attr.config".
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These instances of hard coded config attributes are used for configuring
and validating the event options. Use the config attribute that's
published by the driver by replacing the open coded operations with
evsel__get_config_val() and evsel__set_config_if_unset().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf only looks at attr.config when determining what was programmed into
TRCCONFIGR. These bits could theoretically be in any of the config
fields. Use the evsel__get_config_val() helper so it's agnostic to
which config field they are in.
The kernel will also stop publishing the TRCCONFIGR register bits in a
header [1] so preempt that by defining them here.
[1]: https://lore.kernel.org/linux-arm-kernel/20251128-james-cs-syncfreq-v8-10-4d319764cc58@linaro.org/
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf only looks at attr.config when determining what was programmed into
ETMCR. These bits could theoretically be in any of the config fields.
Add a generic helper to find the value of any named format field in any
config field and then use it to get the attributes relevant to ETMCR.
The kernel will also stop publishing the ETMCR register bits in a header
[1] so preempt that by defining them here.
Move field_prep() to util.h so we can define it along side field_get().
Unfortunately FIELD_PREP() and FIELD_GET() from the kernel can't be used
as they require the mask to be a compile time constant.
[1]: https://lore.kernel.org/linux-arm-kernel/20251128-james-cs-syncfreq-v8-10-4d319764cc58@linaro.org/
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This pattern occurs a few times and we'll add another one later, so add
a helper function for it.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that evsel__set_config_if_unset() behaves as expected. This also
tests the user config change tracking mechanism as it depends on it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Requiring the 'pmu->perf_event_attr_init_default' callback to be set to
track user changes is a bit of a trap to fall in. It's hard to see that
this is required when depending on the user change tracking.
It's possible to want all 0 defaults so not set it, but at the same time
still do some programmatic setting of configs with
evsel__set_config_if_unset(). Also if a PMU reverts to 0 defaults and
deletes its existing callback, it will silently break existing uses of
evsel__set_config_if_unset().
One way to fix this would be to assert in evsel__set_config_if_unset()
if the changes weren't tracked, but that would be a possibly untested
runtime failure. Instead, always track it as it's harmless and
simplifies testing too.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will be used by aux PMUs to read an already written value for
configuring their events and for also testing.
Its helper perf_pmu__format_unpack() does the opposite of the existing
pmu_format_value() so rename that one to perf_pmu__format_pack() so it's
clear how they are related.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Misleadingly, evsel__set_config_if_unset() only works with the config
field and not config1, config2, etc. This is fine at the moment because
all users of it happen to operate on bits that are in that config field.
Fix it before there are any new users of the function which operate on
bits in different config fields.
In theory it's also possible for a driver to move an existing bit to
another config field and this fixes that scenario too, although this
hasn't happened yet either.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we only track which bits were set by the user in attr->config.
But all configN fields should be treated equally as they can all have
default and user overridden values.
Track them all by making get_config_chgs() generic and calling it once
for each config value.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sparse config fields are technically supported although currently
unused. field_prep() only works for contiguous bitfields so replace it
with pmu_format_value().
pmu_format_value() also takes a bitmap rather than a u64 so replace
'u64 bits' with format->bits.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least one of these were put here to avoid a Python binding linking
issue which is no longer present. Put them back in their correct
location to avoid confusion about which file to add a new evsel__*
function to later.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/ZEbAS2yx2fguW60w@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the evsel argument first to match the other evsel__* functions
and remove the redundant pmu argument, which can be accessed via evsel.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ADD_CONFIG_TERM() macros build the __type argument out of a partial
EVSEL__CONFIG_TERM_x enum name. This means that they can't be called
from a function where __type is a variable and it's also impossible to
grep the codebase to find usages of these enums as they're never typed
in full.
Fix this by removing the macros and replacing them with an
add_config_term() function. It seems the main reason these existed in
the first place was to avoid type punning and to write to a specific
field in the union, but the same thing can be achieved with a single
write to a u64 'val' field.
Running the Perf tests with "-fsanitize=undefined -fno-sanitize-recover"
results in no new issues as a result of this change.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On TH1520 SoC, c910_clk feeds the CPU cluster. It could be glitchlessly
reparented to one of the two PLLs: either to cpu_pll0 indirectly through
c910_i0_clk, or to cpu_pll1 directly.
To achieve glitchless rate change, customized clock operations are
implemented for c910_clk: on rate change, the PLL not currently in use
is configured to the requested rate first, then c910_clk reparents to
it.
Additionally, c910_bus_clk, which in turn takes c910_clk as parent,
has a frequency limit of 750MHz. A clock notifier is registered on
c910_clk to adjust c910_bus_clk on c910_clk rate change.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
The MAC settings are different from RTL8922A to RTL8922D, including
scheduler, DLE, DCPU, MLO, NAV, TMAC, TX/RX protocol, RMAC, IMR, host RPT,
AMSDU. Update them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-8-pkshih@realtek.com
Some APs disconnect clients by sending a Disassociation frame
rather than a Deauthentication frame. Since these frames use
different reason codes in WoWLAN mode, this commit adds support
for handling Disassociation to prevent missed disconnection events.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-3-pkshih@realtek.com
On RV32, updating the 64-bit stimecmp (or vstimecmp) CSR requires two
separate 32-bit writes. A race condition exists if the timer triggers
during these two writes.
The RISC-V Privileged Specification (e.g., Section 3.2.1 for mtimecmp)
recommends a specific 3-step sequence to avoid spurious interrupts
when updating 64-bit comparison registers on 32-bit systems:
1. Set the low-order bits (stimecmp) to all ones (ULONG_MAX).
2. Set the high-order bits (stimecmph) to the desired value.
3. Set the low-order bits (stimecmp) to the desired value.
Current implementation writes the LSB first without ensuring a future
value, which may lead to a transient state where the 64-bit comparison
is incorrectly evaluated as "expired" by the hardware. This results in
spurious timer interrupts.
This patch adopts the spec-recommended 3-step sequence to ensure the
intermediate 64-bit state is never smaller than the current time.
Fixes: ffef54ad41 ("riscv: Add stimecmp save and restore")
Signed-off-by: Naohiko Shimizu <naohiko.shimizu@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20260104135938.524-4-naohiko.shimizu@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
On RV32, updating the 64-bit stimecmp (or vstimecmp) CSR requires two
separate 32-bit writes. A race condition exists if the timer triggers
during these two writes.
The RISC-V Privileged Specification (e.g., Section 3.2.1 for mtimecmp)
recommends a specific 3-step sequence to avoid spurious interrupts
when updating 64-bit comparison registers on 32-bit systems:
1. Set the low-order bits (stimecmp) to all ones (ULONG_MAX).
2. Set the high-order bits (stimecmph) to the desired value.
3. Set the low-order bits (stimecmp) to the desired value.
Current implementation writes the LSB first without ensuring a future
value, which may lead to a transient state where the 64-bit comparison
is incorrectly evaluated as "expired" by the hardware. This results in
spurious timer interrupts.
This patch adopts the spec-recommended 3-step sequence to ensure the
intermediate 64-bit state is never smaller than the current time.
Fixes: 8f5cb44b1b ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Naohiko Shimizu <naohiko.shimizu@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20260104135938.524-3-naohiko.shimizu@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
On RV32, updating the 64-bit stimecmp (or vstimecmp) CSR requires two
separate 32-bit writes. A race condition exists if the timer triggers
during these two writes.
The RISC-V Privileged Specification (e.g., Section 3.2.1 for mtimecmp)
recommends a specific 3-step sequence to avoid spurious interrupts
when updating 64-bit comparison registers on 32-bit systems:
1. Set the low-order bits (stimecmp) to all ones (ULONG_MAX).
2. Set the high-order bits (stimecmph) to the desired value.
3. Set the low-order bits (stimecmp) to the desired value.
Current implementation writes the LSB first without ensuring a future
value, which may lead to a transient state where the 64-bit comparison
is incorrectly evaluated as "expired" by the hardware. This results in
spurious timer interrupts.
This patch adopts the spec-recommended 3-step sequence to ensure the
intermediate 64-bit state is never smaller than the current time.
Fixes: 9f7a8ff639 ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Naohiko Shimizu <naohiko.shimizu@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20260104135938.524-2-naohiko.shimizu@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
These boards have a working hardware clock if you put a CR-1220
battery in them. We enable it using information from a 6.1.x vendor
kernel.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Michael Orlitzky <michael@orlitzky.com>
Link: https://lore.kernel.org/r/20260107112922.20013-2-michael@orlitzky.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Add missing unbind() callback to auxiliary::Driver, since it will be
needed by drivers eventually (e.g. the Nova DRM driver).
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107103511.570525-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We must not drop the device private data on shutdown(); none of the
registrations attached to devres that might access the device private
data are released before shutdown() is called.
Hence, freeing the device private data on shutdown() can cause UAF bugs.
Fixes: 57c5bd9aee ("rust: i2c: add basic I2C device and driver abstractions")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Specify that chapter 27 refers to version 20191213 of the RISC-V ISA
Unprivileged Architecture. The chapter numbering differs across
specification versions - for example, in version 20250508, the ISA
Extension Naming Conventions is chapter 36, not chapter 27.
Historical versions of the RISC-V specification can be found via Link [1].
Acked-by: Paul Walmsley <pjw@kernel.org>
Link: https://riscv.org/specifications/ratified/ [1]
Fixes: f07b2b3f9d ("Documentation: riscv: add a section about ISA string ordering in /proc/cpuinfo")
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260115-adding-b-dtsi-v2-1-254dd61cf947@riscstar.com
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, the I2C driver had an extra leading space in column 0 of
included header lines. This commit removes the redundant whitespace.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251226-k1-i2c-ilcr-v5-1-b5807b7dd0e6@linux.spacemit.com
Add the __counted_by() compiler attribute to the flexible array member
'data' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Tyler Hicks <code@tyhicks.com>
Link: https://patch.msgid.link/20260112115314.739612-2-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
Add the __counted_by() compiler attribute to the flexible array member
'value' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260105122057.2347-2-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
Add the __counted_by() compiler attribute to the flexible array member
'iv' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260105122402.2685-2-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
As done for kmalloc_obj*(), introduce a type-aware allocator for flexible
arrays, which may also have "counted_by" annotations:
ptr = kmalloc(struct_size(ptr, flex_member, count), gfp);
becomes:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
The internal use of __flex_counter() allows for automatically setting
the counter member of a struct's flexible array member when it has
been annotated with __counted_by(), avoiding any missed early size
initializations while __counted_by() annotations are added to the
kernel. Additionally, this also checks for "too large" allocations based
on the type size of the counter variable. For example:
if (count > type_max(ptr->flex_counter))
fail...;
size = struct_size(ptr, flex_member, count);
ptr = kmalloc(size, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
becomes (n.b. unchanged from earlier example):
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
Note that manual initialization of the flexible array counter is still
required (at some point) after allocation as not all compiler versions
support the __counted_by annotation yet. But doing it internally makes
sure they cannot be missed when __counted_by _is_ available, meaning
that the bounds checker will not trip due to the lack of "early enough"
initializations that used to work before enabling the stricter bounds
checking. For example:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
fill(ptr->flex, count);
ptr->flex_count = count;
This works correctly before adding a __counted_by annotation (since
nothing is checking ptr->flex accesses against ptr->flex_count). After
adding the annotation, the bounds sanitizer would trip during fill()
because ptr->flex_count wasn't set yet. But with kmalloc_flex() setting
ptr->flex_count internally at allocation time, the existing code works
without needing to move the ptr->flex_count assignment before the call
to fill(). (This has been a stumbling block for __counted_by adoption.)
Link: https://patch.msgid.link/20251203233036.3212363-4-kees@kernel.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Introduce __flex_counter() which wraps __builtin_counted_by_ref(),
as newly introduced by GCC[1] and Clang[2]. Use of __flex_counter()
allows access to the counter member of a struct's flexible array member
when it has been annotated with __counted_by().
Introduce typeof_flex_counter(), overflows_flex_counter_type(), and
__set_flex_counter() to provide the needed _Generic() wrappers to get
sane results out of __flex_counter().
For example, with:
struct foo {
int counter;
short array[] __counted_by(counter);
} *p;
__flex_counter(p->array) will resolve to: &p->counter
typeof_flex_counter(p->array) will resolve to "int". (If p->array was not
annotated, it would resolve to "size_t".)
overflows_flex_counter_type(typeof(*p), array, COUNT) is the same as:
COUNT <= type_max(p->counter) && COUNT >= type_min(p->counter)
(If p->array was not annotated it would return true since everything
fits in size_t.)
__set_flex_counter(p->array, COUNT) is the same as:
p->counter = COUNT;
(It is a no-op if p->array is not annotated with __counted_by().)
Link: https://patch.msgid.link/20251203233036.3212363-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
To support shifting away from sized allocation towards typed
allocations, suggest the kmalloc_obj family of macros when a sizeof() is
present in the argument lists.
Link: https://patch.msgid.link/20251203233036.3212363-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Introduce type-aware kmalloc-family helpers to replace the common
idioms for single object and arrays of objects allocation:
ptr = kmalloc(sizeof(*ptr), gfp);
ptr = kmalloc(sizeof(struct some_obj_name), gfp);
ptr = kzalloc(sizeof(*ptr), gfp);
ptr = kmalloc_array(count, sizeof(*ptr), gfp);
ptr = kcalloc(count, sizeof(*ptr), gfp);
These become, respectively:
ptr = kmalloc_obj(*ptr, gfp);
ptr = kmalloc_obj(*ptr, gfp);
ptr = kzalloc_obj(*ptr, gfp);
ptr = kmalloc_objs(*ptr, count, gfp);
ptr = kzalloc_objs(*ptr, count, gfp);
Beyond the other benefits outlined below, the primary ergonomic benefit
is the elimination of needing "sizeof" nor the type name, and the
enforcement of assignment types (they do not return "void *", but rather
a pointer to the type of the first argument). The type name _can_ be
used, though, in the case where an assignment is indirect (e.g. via
"return"). This additionally allows[1] variables to be declared via
__auto_type:
__auto_type ptr = kmalloc_obj(struct foo, gfp);
Internal introspection of the allocated type now becomes possible,
allowing for future alignment-aware choices to be made by the allocator
and future hardening work that can be type sensitive. For example,
adding __alignof(*ptr) as an argument to the internal allocators so that
appropriate/efficient alignment choices can be made, or being able to
correctly choose per-allocation offset randomization within a bucket
that does not break alignment requirements.
Link: https://lore.kernel.org/all/CAHk-=wiCOTW5UftUrAnvJkr6769D29tF7Of79gUjdQHS_TkF5A@mail.gmail.com/ [1]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/20251203233036.3212363-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Although unlikely, devm_pm_runtime_enable() can fail due to memory
allocations. Without proper error handling, the subsequent
pm_runtime_resume_and_get() call may operate on incorrectly
initialized runtime PM state.
Add error handling to check the return value of
devm_pm_runtime_enable() and return on failure.
Fixes: 25f7d74d45 ("hwspinlock: omap: Use devm_pm_runtime_enable() helper")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251124104805.135-1-vulab@iscas.ac.cn
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There seems to be nothing preventing the driver from being compile
tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110259.23630-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110119.23507-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
qcom,msm-id property must consist of two numbers, where the second
number is the subtype, as reported by dtbs_check:
sm6125-xiaomi-ginkgo.dtb: / (xiaomi,ginkgo): qcom,msm-id:0: [394] is too short
Xiaomi vendor DTS for Trinket IDP and QRD boards uses value of 0x10000,
so put it here as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229142806.241088-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The header has a function which calls pr_err(). Don't require users of
the header to include <linux/printk.h> and include it here.
Fixes: 87cfc79dcd ("drm/msm/a6xx: Resolve the meaning of UBWC_MODE")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20260110-iris-ubwc-v1-1-dd70494dcd7b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge patches that Pengutronix have been carrying in their tree for a
while and were upstreamed by Sascha Hauer together with some new
features that are going into the next release.
Add a test for VMLOAD/VMSAVE in an L2 guest. The test verifies that L1
intercepts for VMSAVE/VMLOAD always work regardless of
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK.
Then, more interestingly, it makes sure that when L1 does not intercept
VMLOAD/VMSAVE, they work as intended in L2. When
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is enabled by L1, VMSAVE/VMLOAD from
L2 should interpret the GPA as an L2 GPA and translate it through the
NPT. When VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is disabled by L1,
VMSAVE/VMLOAD from L2 should interpret the GPA as an L1 GPA.
To test this, put two VMCBs (0 and 1) in L1's physical address space,
and have a single L2 GPA where:
- L2 VMCB GPA == L1 VMCB(0) GPA
- L2 VMCB GPA maps to L1 VMCB(1) via the NPT in L1.
This setup allows detecting how the GPA is interpreted based on which L1
VMCB is actually accessed.
In both cases, L2 sets KERNEL_GS_BASE (one of the fields handled by
VMSAVE/VMLOAD), and executes VMSAVE to write its value to the VMCB. The
test userspace code then checks that the write was made to the correct
VMCB (based on whether VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is set by L1),
and writes a new value to that VMCB. L2 then executes VMLOAD to load the
new value and makes sure it's reflected correctly in KERNERL_GS_BASE.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-4-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Virtual VMSAVE/VMLOAD enablement (i.e.
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK) is set/cleared by
svm_recalc_instruction_intercepts() when the intercepts are cleared/set.
This is unnecessary because the bit is meaningless when intercepts are
set and KVM emulates the instructions. Initialize the bit in vmcb01 base
on vls, and keep it unchanged.
This is similar-ish to how vGIF is handled. It is enabled in init_vmcb()
if vgif=1 and remains unchanged when the STGI intercept is enabled (e.g.
for NMI windows).
This fixes a bug in svm_recalc_instruction_intercepts(). The intercepts
for VMSAVE/VMLOAD are always toggled in vmcb01, but
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is toggled in the current VMCB, which
could be vmcb02 instead of vmcb01 if L2 is active.
Virtual VMSAVE/VMLOAD enablement in vmcb02 is separately controlled by
nested_vmcb02_prepare_control() based on the vCPU features and VMCB12,
and if intercepts are needed they are set by recalc_intercepts().
The bug is benign though. Not toggling the bit for vmcb01 is harmless
because it's useless anyway. For vmcb02:
- The bit could be incorrectly cleared when intercepts are set in
vmcb01. This is harmless because VMSAVE/VMLOAD will be emulated by KVM
anyway.
- The bit could be incorrectly set when the intercepts are cleared in
vmcb01. However, if the bit was originally clear in vmcb02, then
recalc_intercepts() will enable in the intercepts in vmcb02 anyway and
VMSAVE/VMLOAD will be emulated by KVM.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Fixes: cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
With the compile time check located immediately above the
cred_has_capability() function ensuring that we will notice if the
capability set grows beyond 63 capabilities, we can safely remove
the BUG() call from the cred_has_capability().
Signed-off-by: Paul Moore <paul@paul-moore.com>
