The latest firmware increases the major version number. Update
aie2_check_protocol() to accept and support the new firmware version.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251219014356.2234241-2-lizhi.hou@amd.com
The latest firmware requires the message DMA buffer to
- have a minimum size of 8K
- use a power-of-two size
- be aligned to the buffer size
- not cross 64M boundary
Update the buffer allocation logic to meet these requirements and support
the latest firmware.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251219014356.2234241-1-lizhi.hou@amd.com
The RNG is the same IP as in the bcm2711 so add the
device tree block to enable the device.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250927075643.716179-1-pbrobinson@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The davinci_evm_probe() function calls of_parse_phandle() to acquire
device nodes for "ti,audio-codec" and "ti,mcasp-controller". These
functions return device nodes with incremented reference counts.
However, in several error paths (e.g., when the second of_parse_phandle(),
snd_soc_of_parse_card_name(), or devm_snd_soc_register_card() fails),
the function returns directly without releasing the acquired nodes,
leading to reference leaks.
This patch adds an error handling path 'err_put' to properly release
the device nodes using of_node_put() and clean up the pointers when
an error occurs.
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260107154836.1521-2-qikeyu2017@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These methods just read the values stored in the op pointers without
modifying them, so it is appropriate to use const ptrs here.
This allows us to avoid const -> mut pointer casts in Rust.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-3-dbd014005a0b@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In commit 9ce4aef9a5 ("drm/gpuvm: take GEM lock inside
drm_gpuvm_bo_obtain_prealloc()") we update
drm_gpuvm_bo_obtain_prealloc() to take locks internally, which means
that it's only usable in immediate mode.
In this commit, we notice that drm_gpuvm_bo_obtain() requires you to use
staged mode. This means that we now have one variant of obtain for each
mode you might use gpuvm in.
To reflect this information, we add a warning about using it in
immediate mode, and to make the distinction clearer we rename the method
with a _locked() suffix so that it's clear that it requires the caller
to take the locks.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-2-dbd014005a0b@google.com
[ Slightly reword commit message to refer to commit 9ce4aef9a5
("drm/gpuvm: take GEM lock inside drm_gpuvm_bo_obtain_prealloc()").
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-06 (idpf)
This series contains updates to idpf driver only.
Emil fixes issues related to resets; among them timeouts, NULL pointer
dereferences, and memory leaks.
Sreedevi resolves issues around RSS; mainly involving operations when
the interface is down and resets. She also addresses some incomplete
cleanups for ntuple filters and interrupts.
Erik fixes incomplete output of ntuple filters.
Josh sets restriction of Rx buffer size to follow hardware restrictions.
Larysa adds check to prevent NULL pointer dereference when RDMA is not
enabled.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix aux device unplugging when rdma is not supported by vport
idpf: cap maximum Rx buffer size
idpf: Fix error handling in idpf_vport_open()
idpf: Fix RSS LUT NULL ptr issue after soft reset
idpf: Fix RSS LUT configuration on down interfaces
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
idpf: fix issue with ethtool -n command display
idpf: fix memory leak of flow steer list on rmmod
idpf: fix error handling in the init_task on load
idpf: fix memory leak in idpf_vc_core_deinit()
idpf: fix memory leak in idpf_vport_rel()
idpf: detach and close netdevs while handling a reset
idpf: keep the netdev when a reset fails
====================
Link: https://patch.msgid.link/20260107000648.1861994-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
-----BEGIN PGP SIGNATURE-----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=KKD4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Link: https://patch.msgid.link/20260108140141.139687-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The size of the buffer is not the same when alloc'd with
dma_alloc_coherent() in he_init_tpdrq() and freed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make's install target is meant for installing the production
artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool
from under the main YNL install target. The install target
under tests/ is retained in case someone wants the tests
to be installed.
Fixes: 308b7dee3e ("tools: ynl: add YNL test framework")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NULL pointer dereference fix.
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7 ("net: af_unix:
implement splice for stream af_unix sockets").
Also collapse two branches using a bitwise or.
Cc: stable@vger.kernel.org
Fixes: 4d1442979e ("af_unix: don't post cmsg for SO_INQ unless explicitly asked for")
Link: https://lore.kernel.org/netdev/willemdebruijn.kernel.24d8030f7a3de@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260106150626.3944363-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calling drm_gpuvm_bo_obtain_prealloc() and using immediate mode,
this may result in a call to ops->vm_bo_free(vm_bo) while holding the
GEMs gpuva mutex. This is a problem if ops->vm_bo_free(vm_bo) performs
any operations that are not safe in the fence signalling critical path,
and it turns out that Panthor (the only current user of the method)
calls drm_gem_shmem_unpin() which takes a resv lock internally.
This constitutes both a violation of signalling safety and lock
inversion. To fix this, we modify the method to internally take the GEMs
gpuva mutex so that the mutex can be unlocked before freeing the
preallocated vm_bo.
Note that this modification introduces a requirement that the driver
uses immediate mode to call drm_gpuvm_bo_obtain_prealloc() as it would
otherwise take the wrong lock.
Fixes: 63e919a316 ("panthor: use drm_gpuva_unlink_defer()")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-1-dbd014005a0b@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources.
Suggested-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Cc: stable@vger.kernel.org
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260106-bnxt-v3-1-71f37e11446a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace legacy DRM_ERROR()/DRM_INFO() logging in the UVD v1.0 code
with drm_err() and drm_info() helpers that take a struct drm_device.
Using drm_* logging provides proper device context in dmesg, which is
important for systems with multiple DRM devices, and aligns the radeon
driver with current DRM logging practices.
No functional change intended.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukesh Ogare <mukeshogare871@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, guest drivers no longer setup/destory
VMR starting from mp0 v11_0_7.
In bare-metal, if boot-time TMR is enabled, some
generation (e.g., mp0 v13_0_x) don’t need runtime
TMR allocation but still require SETUP_TMR command
with tmr address 0 for backward compatibility.
some newer generations require neither SETUP_TMR nor
DESTROY_TMR and will return errors if they are sent.
Driver relies on boot_time_tmr and autoload_supported
to handle these cases correctly.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper amdgpu_gtt_mgr_alloc/free_entries, define
GART_ENTRY_WITHOUT_BO_COLOR color for GART node not allocated with GTT
bo, then amdgpu_gtt_mgr_recover skip those mm_node.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change to switch style checks and return the correct size for gpu board
metrics.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix several places where %ld or %d has been used in place of
%lu or %u.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU board and Baseboard temperatures come from system metrics table.
Driver keeps separate metrics table for both. Use the new driver table
structure to represent them.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If cached gpu metrics table is available, return it directly. Also,
deprecate gpu_metrics_table variables as they are no longer used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv14. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv13. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv12. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources.
Fixes: 323b34963d ("drivers: net: usb: pegasus: fix control urb submission")
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use driver table structure for gpu metrics in smuv11. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pdev can be null and free_ring: can be called in 1297 with a null
pdev.
Fixes: 55c82617c3 ("3c59x: convert to generic DMA API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafael J. Wysocki says:
====================
net: Discard pm_runtime_put() return value
This is mostly was a resend of patches [10-12/23] from:
https://lore.kernel.org/linux-pm/6245770.lOV4Wx5bFT@rafael.j.wysocki/
as requested by Jakub, except for the last patch that has been fixed
while at it and so the version has been bumped up.
The patches are independent of each other and they are all requisite
for converting pm_runtime_put() into a void function.
====================
Link: https://patch.msgid.link/2816529.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The framer driver defines framer_pm_runtime_put() to return an int,
but that return value is never used. It also passes the return value
of pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3027916.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update at91ether_close() to simply discard the return
value of pm_runtime_put() and always return success to the caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/2252292.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update am65_cpsw_ethtool_op_begin() and cpsw_ethtool_op_begin()
to simply discard the return value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5042490.GXAFRqVoOG@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b7e2823787 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition.
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-3-houtao@huaweicloud.com
When ida_alloc() fails in em_create_pd(), the function returns without
freeing the previously allocated 'pd' structure, leading to a memory leak.
The 'pd' pointer is allocated either at line 436 (for CPU devices with
cpumask) or line 442 (for other devices) using kzalloc().
Additionally, the function incorrectly returns -ENOMEM when ida_alloc()
fails, ignoring the actual error code returned by ida_alloc(), which can
fail for reasons other than memory exhaustion.
Fix both issues by:
1. Freeing the 'pd' structure with kfree() when ida_alloc() fails
2. Returning the actual error code from ida_alloc() instead of -ENOMEM
This ensures proper cleanup on the error path and accurate error reporting.
Fixes: cbe5aeedec ("PM: EM: Assign a unique ID when creating a performance domain")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260105103730.65626-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Due to commit 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove
division"), the logic for energy consumption calculation has been modified.
The actual calculation of cost is 10 * power * max_frequency / frequency
instead of power * max_frequency / frequency.
Therefore, the comment for cost has been updated to reflect the correct
content.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added Fixes: tag ]
Link: https://patch.msgid.link/20251230061534.816894-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=s/hE
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build fix for HID-BPF (Benjamin Tissoires)
- fix for potential buffer overflow in i2c-hid (Kwok Kin Ming)
- a couple of selftests/hid fixes (Peter Hutterer)
- fix for handling pressure pads in hid-multitouch (Peter Hutterer)
- fix for potential NULL pointer dereference in intel-thc-hid (Even Xu)
- fix for interrupt delay control in intel-thc-hid (Even Xu)
- fix finger release detection on some VTL-class touchpads (DaytonCL)
- fix for correct enumeration on intel-ish-hid systems with no sensors
(Zhang Lixu)
- assorted device ID additions and device-specific quirks
* tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (21 commits)
HID: logitech: add HID++ support for Logitech MX Anywhere 3S
HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)
HID: quirks: work around VID/PID conflict for appledisplay
HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
selftests/hid: add a test for the Digitizer/Button Type pressurepad
selftests/hid: use a enum class for the different button types
selftests/hid: require hidtools 0.12
HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
hid: intel-thc-hid: Select SGL_ALLOC
selftests/hid: fix bpf compilations due to -fms-extensions
HID: bpf: fix bpf compilation with -fms-extensions
HID: Intel-thc-hid: Intel-thc: Fix wrong register reading
HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL
HID: intel-ish-hid: Reset enum_devices_done before enumeration
HID: intel-ish-hid: Update ishtp bus match to support device ID table
HID: Intel-thc-hid: Intel-thc: fix dma_unmap_sg() nents value
HID: playstation: Center initial joystick axes to prevent spurious events
...
The write of cfgdone bits always done at .atomic_flush.
When userspace makes plane zpos changes of two crtc within one commit,
at the .atomic_begin stage, crtcN will never receive the "layer change
cfg done" event of crtcM because crtcM has not yet written "cfgdone".
So only wait when there is pending cfgdone bits to avoid long timeout.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250718064120.8811-2-andyshrk@163.com
