Add an entry for the MT8371 SoC with commercial name Genio 520.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
Fixes: 13f1bbcfb5 ("soc: mediatek: SVS: add debug commands")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
[Angelo: Added missing cleanup.h inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Move the "interrupt-parent = <&plic>" property from the soc node to the
top node, for consistency with
arch/arm64/boot/dts/renesas/r9a07g043u.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/97d3d70e42832f4ffa3888bec792b692a7ab700f.1767719409.git.geert+renesas@glider.be
Add PCLKCAN ID for CANFD to both R9A09G077 and R9A09G087 SoCs.
This definition is required for describing CANFD device in DT.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251224165049.3384870-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Private state is available in all places where cpg_rzt2h_mstp_read() is
called, remove the extra pointer math used to find it from clk_hw.
While at it, put these statements on a single line as they do not exceed
the 80 columns limit.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251127145654.3253992-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
"version" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
ahci_xgene.c:776:13: error: cast to smaller integer type 'enum xgene_ahci_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
"imxpriv->type" is an enum, thus cast of pointer on 64-bit compile test
with clang W=1 causes:
ahci_imx.c:872:18: error: cast to smaller integer type 'enum ahci_imx_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Use scoped for-each loop when iterating over device nodes and switch to
iterating already over available nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The "select" schema is not necessary. It looks like it is there to prevent
matching on "generic-ahci" compatible, but that's not necessary because
this is the only place "generic-ahci" compatible is present.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
clear_page() translates into memset(*p, 0, PAGE_SIZE) on some
architectures, but on the major architectures it will call
an optimized assembly snippet so use this instead of open
coding a memset().
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251130-dma-buf-heap-clear-page-v1-1-a8dcea2a88ee@linaro.org
Add the dma property and associated dma activation for usart6 as part of
flx6 node.
Is useful for usual default console on this product.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-4-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Fix the #size-cells property for i2c3 node and remove the dtbs_check
error telling that "#size-cells: 0 was expected" from schema
atmel,at91sam-i2c.yaml and i2c-controller.yaml.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
"device_type" is required for memory nodes, but is missing on Nuvoton
npcm845-evb.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The ALTRAD8 BMC is an Aspeed AST2500-based BMC for the ASRock Rack
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Tested-by: Tan Siewert <tan.siewert@hetzner.com>
Reviewed-by: Tan Siewert <tan.siewert@hetzner.com>
Link: https://patch.msgid.link/20251218161816.38155-3-rebecca@bsdio.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Device-to-device migration is causing xe_exec_system_allocator --r
*race*no* to intermittently fail with engine resets and a kernel hang on
a page lock. This should work but is clearly buggy somewhere. Disable
device-to-device migration in the interim until the issue can be
root-caused.
The only downside of disabling device-to-device migration is that memory
will bounce through system memory during migration. However, this path
should be rare, as it only occurs when madvise attributes are changed or
atomics are used.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: ec265e1f1c ("drm/pagemap: Support source migration over interconnect")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260107182716.2236607-3-matthew.brost@intel.com
Avoid unlocking and putting device pages unless they were successfully
locked, and do not calculate migrated_pages on error paths.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260107182716.2236607-2-matthew.brost@intel.com
Page accounting can change via the shrinker without calling
xe_ttm_tt_unpopulate(), which normally updates page count tracepoints
through update_global_total_pages. Add a call to
update_global_total_pages when the shrinker successfully shrinks a BO.
v2:
- Don't adjust global accounting when pinning (Stuart)
Cc: stable@vger.kernel.org
Fixes: ce3d39fae3 ("drm/xe/bo: add GPU memory trace points")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260107205732.2267541-1-matthew.brost@intel.com
Remove the "try-power-role = sink" property from all USB-C connectors.
The try mechanism is unnecessary and wastes time during connection.
Since power-role = "dual" is already configured, standard USB PD
negotiation is sufficient and more efficient.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The Meta Anacapa BMC is the DC-SCM (Data Center Secure Control
Module) controller for the Meta OCP Open Rack Wide (ORW) compute tray.
This platform is a key component of the AMD Helios AI rack reference
design system, designed for next-generation AI workloads.
The BMC utilizes the Aspeed AST2600 SoC to manage the compute tray, which
contains up to 4 AMD Instinct MI450 Series GPUs (connected via a Broadcom
OCP NIC) and host CPUs. Its primary role is to provide essential system
control, power sequencing, and telemetry reporting for the compute complex
via the OpenBMC software stack.
For more detail on the AMD Helios reference design:
https://www.amd.com/en/blogs/2025/amd-helios-ai-rack-built-on-metas-2025-ocp-design.html
Signed-off-by: Peter Shen <sjg168@gmail.com>
Link: https://patch.msgid.link/20251219091632.1598603-3-sjg168@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Replace ARCH_TEGRA_194_SOC dependency with a more generic ARCH_TEGRA check
for the Tegra194 PCIe controller, allowing it to be built on Tegra
platforms beyond Tegra194. Additionally, ensure compatibility by requiring
ARM64 or COMPILE_TEST since this driver works only for ARM64 Tegra SoCs.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[mani: moved ARM64 dependency to ARCH_TEGRA]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250508051922.4134041-1-vidyas@nvidia.com
BPF_MAP_TYPE_INSN_ARRAY maps store instruction pointers in their
ips array, not string data. The map_direct_value_addr callback for
this map type returns the address of the ips array, which is not
suitable for use as a constant string argument.
When a BPF program passes a pointer to an insn_array map value as
ARG_PTR_TO_CONST_STR (e.g., to bpf_snprintf), the verifier's
null-termination check in check_reg_const_str() operates on the
wrong memory region, and at runtime bpf_bprintf_prepare() can read
out of bounds searching for a null terminator.
Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str() since this
map type is not designed to hold string data.
Reported-by: syzbot+2c29addf92581b410079@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2c29addf92581b410079
Tested-by: syzbot+2c29addf92581b410079@syzkaller.appspotmail.com
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260107021037.289644-1-kartikey406@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cgrp_ancestor_storage has two drawbacks:
- it's not guaranteed that the member immediately follows struct cgrp in
cgroup_root (root cgroup's ancestors[0] might thus point to a padding
and not in cgrp_ancestor_storage proper),
- this idiom raises warnings with -Wflex-array-member-not-at-end.
Instead of relying on the auxiliary member in cgroup_root, define the
0-th level ancestor inside struct cgroup (needed for static allocation
of cgrp_dfl_root), deeper cgroups would allocate flexible
_low_ancestors[]. Unionized alias through ancestors[] will
transparently join the two ranges.
The above change would still leave the flexible array at the end of
struct cgroup inside cgroup_root, so move cgrp also towards the end of
cgroup_root to resolve the -Wflex-array-member-not-at-end.
Link: https://lore.kernel.org/r/5fb74444-2fbb-476e-b1bf-3f3e279d0ced@embeddedor.com/
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/r/b3eb050d-9451-4b60-b06c-ace7dab57497@embeddedor.com/
Cc: David Laight <david.laight.linux@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
This was lost in the 6.19 merge so reapply it.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3925683515)
dac_load_detection can be NULL in some scenario, so checking it before
calling.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 179176134b)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4)
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
-----BEGIN PGP SIGNATURE-----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=PTH1
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-01-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
. Replace system_wq with system_percpu_wq in the Exynos HDMI driver.
system_wq is effectively a per-cpu workqueue, but its name does not make
this explicit. Recent workqueue changes introduced system_percpu_wq to clarify
semantics and support ongoing workqueue API refactoring.
-----BEGIN PGP SIGNATURE-----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=0Sg+
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One code cleanup
. Replace system_wq with system_percpu_wq in the Exynos HDMI driver.
system_wq is effectively a per-cpu workqueue, but its name does not make
this explicit. Recent workqueue changes introduced system_percpu_wq to clarify
semantics and support ongoing workqueue API refactoring.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260107091154.27436-1-inki.dae@samsung.com
The driver only supports AArch64 page tables where OAS == IAS.
Remove the extra IAS tracking for AArch32 as this feature was
never implemented and that was creating BAD_STEs for SMMUv3
with stage-2 and OAS < 40.
Further discussion on this in:
https://lore.kernel.org/linux-iommu/20251130194506.593700-1-smostafa@google.com/
Reported-by: Tomasz Nowicki <tnowicki@google.com>
Fixes: f0c453dbcc ("iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Document the ISH firmware filename matching rules, including the
new PRODUCT_FAMILY-based patterns and their search order.
This aligns the documentation with the driver behavior and provides
clear guidance for vendors supplying custom ISH firmware.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for firmware filenames that include the CRC32 checksum of the
DMI product_family field. Several OEMs ship ISH firmware variants shared
across a product family while product_name or product_sku may differ. This
intermediate matching granularity reduces duplication and improves firmware
selection for vendor-customized platforms.
The newly supported filename forms are checked before existing patterns:
ish_${gen}_${vendor}_${family}_${name}_${sku}.bin
ish_${gen}_${vendor}_${family}_${sku}.bin
ish_${gen}_${vendor}_${family}_${name}.bin
ish_${gen}_${vendor}_${family}.bin
The legacy product_name/product_sku rules remain unchanged and continue
to provide fallback matching.
ISH_FW_FILENAME_LEN_MAX is changed to 72 to accommodate the product_family.
Tested with X9 series and X1 series.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Richie Roy Jayme <rjayme.jp@gmail.com>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Send POWER_SLEEP command to touch device when system enters into sleep
mode or hibernate mode to save more power; and send POWER_ON command to
take device back when system exits sleep mode.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for HID output reports in the intel-quicki2c driver by
implementing the output_report callback in the HID low-level driver
interface.
This enables proper communication with HID devices that require
output report functionality, such as setting device configuration or
updating device firmware.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are two output formats requested in the HID-over-I2C specification:
- Command format (set feature/set report): encoded command written to
command register, followed by data written to data register
- Output report format: all data written directly to output register
Current quicki2c_init_write_buf() implementation only supports the
command format.
Extend quicki2c_init_write_buf() to automatically detect the output
format based on the presence of command parameters and prepare the
appropriate output buffer accordingly.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace memcpy operations with put_unaligned_le16() when writing 16-bit
little-endian values to the write buffer.
This change improves code clarity and ensures proper handling of unaligned
memory access.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert all length-related variables in the QuickI2C protocol layer to use
size_t type to follow kernel coding conventions.
This includes:
- All buffer length parameters and variables
- Return values of quicki2c_encode_cmd() function which represents
encoded command buffer size.
- Return values of quicki2c_init_write_buf() function which represents
process result: either prepared output buffer size or error code.
This change improves type consistency and aligns with standard kernel
practices for memory size representation, reducing potential issues
with size calculations and comparisons.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions.
sysfs_emit() and sysfs_emit_at() are preferred to format sysfs output
as they provide better bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251220223026.125678-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
