imx8qxp_pxl2dpi_find_next_bridge() already emits a DRM_DEV_ERROR() for
every error except -EPROBE_DEFER. The caller emits another one, which is
redundant. Remove the message in the caller and keep the two in
imx8qxp_pxl2dpi_find_next_bridge() as they are more informative about the
error cause.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-14-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-12-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-11-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-10-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-9-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-8-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated. Move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-7-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Many bridge drivers store a next_bridge pointer in their private data and
use it for attach and sometimes other purposes. This is going to be risky
when bridge hot-unplug is used.
Considering this example scenario:
1. pipeline: encoder --> bridge A --> bridge B --> bridge C
2. encoder takes a reference to bridge B
3. bridge B takes a next_bridge reference to bridge C
4. encoder calls (bridge B)->b_foo(), which in turns references
next_bridge, e.g.:
b_foo() {
bar(b->next_bridge);
}
If bridges B and C are removed, bridge C can be freed but B is still
allocated because the encoder holds a reference to B. So when step 4
happens, 'b->next-bridge' would be a use-after-free.
Calling drm_bridge_put() in the B bridge .remove function does not solve
the problem as it leaves a (potentially long) risk window between B removal
and the final deallocation of B. A safe moment to put the B reference is in
__drm_bridge_free(), when the last reference has been put. This can be done
by drivers in the .destroy func. However to avoid the need for so many
drivers to implement a .destroy func, just offer a next_bridge pointer to
all bridges that is automatically put it in __drm_bridge_free(), exactly
when the .destroy func is called.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/all/20251201-thick-jasmine-oarfish-1eceb0@houat/
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-6-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() does not increment the refcount for the returned
bridge, but that is required now. However converting it and all its users
is not realistically doable at once given the large amount of (direct and
indirect) callers and the complexity of some.
Solve this issue by creating a new of_drm_find_and_get_bridge() function
that is identical to of_drm_find_bridge() except also it takes a
reference. Then of_drm_find_bridge() will be deprecated to be eventually
removed.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/dri-devel/20250319-stylish-lime-mongoose-0a18ad@houat/
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-1-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Update the DP83867 ethernet phy impedance settings to
to optimize signal quality and reduce potential signal integrity issues.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FRDM i.MX 93 development board is a low-cost and compact development
board featuring the i.MX93 applications processor.
It features:
- Dual Cortex-A55
- 2 GB LPDDR4X / LPDDR4
- 32 GB eMMC5.1
- MicroSD slot
- GbE RJ45 x 2
- USB2.0 1x Type C, 1x Type A
This file is based upon the one provided by nxp in their own kernel and
yocto meta layer for the device, but adapted for mainline.
Signed-off-by: Haidong Zheng <haidong.zheng@nxp.com>
Signed-off-by: Danwei Luo <danwei.luo@nxp.com>
Signed-off-by: Lei Xu <lei.xu@nxp.com>
Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
Reviewed-by: Francesco Valla <francesco@valla.it>
Tested-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8XxS on MB-SMARC-2 supports mPCIe on X44.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This option explicitly selects other options, e.g. SND_SOC_FSL_SAI.
These SAI drivers use DMA which in turn is dependent on CONFIG_IMX_SDMA.
SDMA needs a firmware which is not yet present if the driver is built-in.
Thus build CONFIG_SND_SOC_FSL_ASOC_CARD to avoid useless driver probe
deferrals due to missing DMA channels.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix SD card removal caused by automatic LDO5 power off after boot
To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled
regulator that is supplied by LDO5. Since this is implemented on SoM but
used on baseboards with SD-card interface, implement the functionality
on SoM part and optionally enable it on baseboards if needed.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BUCK5 regulator supplies the 1.8V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BUCK4 rail supplies the 3.3V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix SD card removal caused by automatic LDO5 power off after boot.
To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled
regulator that is supplied by LDO5. Since this is implemented on SoM but
used on baseboards with SD-card interface, implement the functionality
on SoM part and optionally enable it on baseboards if needed.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove one empty line that is not needed.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BUCK5 regulator supplies the 1.8V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BUCK4 rail supplies the 3.3V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VAR-SOM-MX8MP integrates a TSC2046 resistive touchscreen controller.
The controller is physically located on the SOM, and its signals are
routed to the SOM pins, allowing carrier boards to make use of it.
This patch adds the TSC2046 node and the appropriate SPI controller.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VAR-SOM-MX8MP can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.
This patch adds the WM8904 device to the appropriate I2C bus, enables
the SAI peripheral, and introduces the sound node to expose the
sound card to the system.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree nodes for the WiFi and Bluetooth module mounted on the
VAR-SOM-MX8MP. The module can be based on either the NXP IW612 or IW611
chipset, depending on the configuration chosen by the customer.
Regardless of the chipset used, WiFi communicates over SDIO and Bluetooth
over UART.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VAR-SOM-MX8MP module does not provide an onboard debug console.
UART2 is routed and exposed only on the Symphony carrier board, while
custom carrier designs may choose to expose a different UART.
Move the UART2 node from the SOM device tree to the
imx8mp-var-som-symphony.dts, keeping the SOM dtsi limited to hardware
present on the module itself.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VAR-SOM-MX8MP module does not include the PCA9534 GPIO expander nor
the LED connected to it. These components are present only on the
Symphony carrier board and may vary across custom carrier designs.
Move the PCA9534 GPIO expander node and the associated LED definition
from the SOM device tree to the Symphony carrier DTS, ensuring the SOM
dtsi describes only hardware present on the module.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VAR-SOM-MX8MP module does not include a microSD slot connected to
USDHC2. The USDHC2 interface is routed only on the Symphony carrier
board, and it may optionally be used or omitted depending on the
customer's carrier design.
Move the USDHC2 node, its regulators, pinctrl groups and related GPIOs
from the SOM device tree to the Symphony carrier DTS, keeping the SOM
description limited to hardware populated on the module.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TJA1057 used on i.MX93 EVK is actually high-speed CAN
transceiver, not a regulator supply. So use phys to reflect the truth.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TJA1048 used on i.MX8MP-EVK is actually high-speed CAN transceiver,
not a regulator supply. So use phys to reflect the truth.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TJA1051T/3 used on i.MX95-15x15-EVK is actually high-speed CAN
transceiver, not a regulator supply. So use phys to reflect the truth.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GPC interrupt node to silence W=1
warning:
imx6qdl.dtsi:281.4-284.29: Warning (interrupt_map): /soc/pcie@1ffc000:interrupt-map:
Missing property '#address-cells' in node /soc/bus@2000000/gpc@20dc000, using 0 as fallback
Value '0' is correct because:
1. GPC interrupt controller children are only power domains,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPC power controller is an interrupt controllers and can be referenced
in interrupt-map properties, e.g. PCIe controller, thus the node should
have address-cells property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable DC Balance from vrr compute config and related hw flag.
Also to add pipe restrictions along with this.
--v2:
- Use dc balance check instead of source restriction.
--v3:
- Club pipe restriction check with dc balance enablement. (Ankit)
--v4:
- Separate out Pipe restrictions to patch#7
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-19-mitulkumar.ajitkumar.golani@intel.com
Pause the DMC DC Balancing for the remainder of the
commit so that vmin/vmax won't change after we've baked
them into the DSB vblank evasion commands.
--v2:
- Remove typo. (Ankit)
- Separate vrr enable structuring. (Ankit)
--v3:
- Add gaurd before accessing DC balance bits.
- Remove redundancy checks.
--v4:
- Move events to separate function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-17-mitulkumar.ajitkumar.golani@intel.com
Add function to control DC balance enable/disable bit via DSB.
--v2:
Remove redundant forward declaration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-16-mitulkumar.ajitkumar.golani@intel.com
After VRR Push is sent, need to wait till flipline decision boundary
to get Push bit to get cleared.
--v2:
- Adjust delays to vrr vmin vblank delays. (Ankit)
--v3:
- Change intel_vrr_vmin_safe_window_end() so that
intel_dsb_wait_for_delayed_vblank() uses correct delay. (Ankit)
--v4:
- Simplify intel_vrr_vmin_safe_window_end implementation. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-15-mitulkumar.ajitkumar.golani@intel.com
Add vblank evasion logic when vrr is already enabled along with
dc balance is computed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-14-mitulkumar.ajitkumar.golani@intel.com
Write DC Balance parameters to hw registers.
--v2:
- Update commit header.
- Separate crtc_state params from this patch. (Ankit)
--v3:
- Write registers at compute config.
- Update condition for write.
--v4:
- Address issue with state checker.
--v5:
- Initialise some more dc balance register while enabling VRR.
--v6:
- FLIPLINE_CFG need to be configure at last, as it is double buffer
arming point.
--v7:
- Initialise and reset live value of vmax and vmin as well.
--v8:
- Add separate functions while writing hw registers. (Ankit)
--v9:
- Add DC Balance counter enable bit to this patch. (Ankit)
--v10:
- Add rigister writes to vrr_enable/disable. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-12-mitulkumar.ajitkumar.golani@intel.com
Track dc balance flip count with params per crtc. Increment
DC Balance Flip count before every flip to indicate DMC
firmware about new flip occurrence which needs to be adjusted
for dc balancing. This is tracked separately from legacy
FLIP_COUNT register also Reset DC balance flip count value
while disabling VRR adaptive mode, this is to start with
fresh counts when VRR adaptive refresh mode is triggered again.
--v2:
- Call during intel_update_crtc.(Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-11-mitulkumar.ajitkumar.golani@intel.com
Add function which resets all accumulated DC Balance parameters
whenever adaptive mode of VRR goes off. This helps to give a
fresh start when VRR is re-enabled.
--v2:
- Typo, change crtc_state to old_crtc_state. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-10-mitulkumar.ajitkumar.golani@intel.com
Add a function that checks if DC Balance enabling is possible on the
requested PIPE. Apart from the DISPLAY_VER check, account for current
firmware limitations, which only allow DC Balance on PIPE A and PIPE B.
v2: Rephrased commit message. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-9-mitulkumar.ajitkumar.golani@intel.com
Compute DC Balance parameters and tunable params based on
experiments.
--v2:
- Document tunable params. (Ankit)
--v3:
- Add line spaces to compute config. (Ankit)
- Remove redundancy checks.
--v4:
- Separate out conpute config to separate function.
- As all the valuse are being computed in scanlines, and slope
is still in usec, convert and store it to scanlines.
--v5:
- Update and add comments for slope calculation. (Ankit)
- Update early return conditions for dc balance compute. (Ankit)
--v6:
- Early return condition simplified for dc balance compute config. (Ankit)
- Make use of pipe restrictions to this patch. (Ankit)
--v7:
- Separate out PIPE_A and PIPE_B restrictions to other patch.(Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223104542.2688548-8-mitulkumar.ajitkumar.golani@intel.com
