Commit 8a55fbe4c9 ("dt-bindings: interconnect: add reg and clocks
properties to enable QoS on sa8775p") claims that all interconnects have
clocks and MMIO address space, but that is just not true. Only few
have. Bindings should restrict properties and should not allow
specifying non-existing hardware description, so fix missing constraints
for 'reg' and 'clocks'.
Fixes: 8a55fbe4c9 ("dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251129094612.16838-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Debug trigger extension is an SBI extension to support native debugging
in S-mode and VS-mode. This patch adds the extension and the function
IDs defined by the extension.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Link: https://patch.msgid.link/20250710125231.653967-2-hchauhan@ventanamicro.com
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace the same code with the pre-defined macro
RISCV_FULL_BARRIER to simplify the code.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://patch.msgid.link/20251120095831.64211-1-min_halo@163.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Export Zilsd and Zclsd ISA extensions through hwprobe.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-4-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: fixed whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add parsing for Zilsd and Zclsd ISA extensions which were ratified in
commit f88abf1 ("Integrating load/store pair for RV32 with the
main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-3-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: cleaned up checkpatch issues, whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add descriptions for the Zilsd (Load/Store pair instructions) and
Zclsd (Compressed Load/Store pair instructions) ISA extensions
which were ratified in commit f88abf1 ("Integrating load/store
pair for RV32 with the main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250826162939.1494021-2-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Let's not call atomic_long_xchg() on something that's not an
atomic_long_t, and just use xchg() instead. Continues the cleanup
from commit 546e42c8c6 ("riscv: Use an atomic xchg in
pudp_huge_get_and_clear()"),
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When !CONFIG_SMP, there's no need for atomic operations in
ptep_get_and_clear(), so, similar to x86, let's not use atomics in
this case.
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When !CONFIG_SMP, there's no need for atomic operations in
pmdp_huge_get_and_clear(), so, similar to what x86 does, let's not use
atomics in this case. See also commit 546e42c8c6 ("riscv: Use an
atomic xchg in pudp_huge_get_and_clear()").
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The function save_v_state() served two purposes. First, it saved
extension context into the signal stack. Then, it constructed the
extension header if there was no fault. The second part is independent
of the extension itself. As a result, we can pull that part out, so
future extensions may reuse it. This patch adds arch_ext_list and makes
setup_sigcontext() go through all possible extensions' save() callback.
The callback returns a positive value indicating the size of the
successfully saved extension. Then the kernel proceeds to construct the
header for that extension. The kernel skips an extension if it does
not exist, or if the saving fails for some reasons. The error code is
propagated out on the later case.
This patch does not introduce any functional changes.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-16-b55691eacf4f@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
WCL supports a maximum of HBR3 8.1 Gbps for both eDP/DP.
Limit the max source rate to HBR3 for WCL.
v2: Move the check inside mtl_max_source_rate(). (Suraj)
Bspec:74286
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251122053651.759389-1-ankit.k.nautiyal@intel.com
Replace the for loop with a call to crypto_unregister_algs(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code.
In crypto_unregister_algs(), unregister the algorithms in reverse order.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_scomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document x1e80100 compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __maybe_unused attribute to the crypto_scomp_show() definition
and remove the now-unnecessary forward declaration.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fips_enable() function is only invoked early during kernel boot via the
__setup() macro ("fips=" command line parameter), and is never used again
after initialization completes.
Annotating it with __init places the function in the .init.text section,
allowing the kernel to free its memory after init (when freeing_initmem()
runs), reducing runtime memory footprint.
This is a standard practice for setup/early-parse functions and has no
functional impact — the parsing logic, return values, and fips mode
setting behavior remain unchanged.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return the result directly to simplify init_iaa_device().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org
Fixes: b190447e0f ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org
Fixes: d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h:251:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qm_get_complete_eqe_num(), the function entry has already
checked whether the interrupt is valid, so the interrupt event
can be processed directly. Currently, the interrupt valid bit is
being checked again redundantly, and no interrupt processing is
performed. Therefore, the loop condition should be modified to
directly process the interrupt event, and use do while instead of
the current while loop, because the condition is always satisfied
on the first iteration.
Fixes: f5a332980a ("crypto: hisilicon/qm - add the save operation of eqe and aeqe")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/starfive/jh7110-cryp.h:219:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a5 ("crypto: qat - introduce support for PFVF block messages")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macro ICP_QAT_FW_COMN_FLAGS_BUILD sets flags in the firmware
descriptor to indicate:
* Whether the content descriptor is a pointer or contains embedded
data.
* Whether the source and destination buffers are scatter-gather lists
or flat buffers.
The correct parameter order is:
* First: content descriptor type
* Second: source/destination pointer type
In the asymmetric crypto code, the macro was used with the parameters
swapped. Although this does not cause functional issues, since both
macros currently evaluate to 0, it is incorrect.
Fix the parameter order in the Diffie-Hellman and RSA code paths.
Fixes: a990532023 ("crypto: qat - Add support for RSA algorithm")
Fixes: c9839143eb ("crypto: qat - Add DH support")
Reported-by: Qihua Dai <qihua.dai@intel.com> # off-list
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321db ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The mdelay() is called in sleeping context and it should be OK to delay
slightly longer than requested, so switch the code to use fsleep() to
avoid spinning.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251113-op6-tri-state-v8-1-54073f3874bc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Like the TWL4030, these PMICs also have a power button feature, so extend
the TWL4030 power button driver. As the irqchip of the TWL6030 mfd driver
does not provide mask, unmask finctions, do it manually.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251106-twl6030-button-v4-2-fdf1aa6e1e9a@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-3-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-2-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In irq_domain_set_name() a const pointer is passed in, and then the
const is "lost" when container_of() is called. Fix this up by properly
preserving the const pointer attribute when container_of() is used to
enforce the fact that this pointer should not have anything at it
changed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/2025121731-facing-unhitched-63ae@gregkh
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Build environment: Python 3.13.7 Sphinx 8.2.3 docutils 0.22.3
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Link: https://patch.msgid.link/20251209094836.18589-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
posted_msi_supported() is a misnomer as it actually checks whether it is
enabled or not. Aside of that this does not take CONFIG_X86_POSTED_MSI into
account which is required to actually use it.
Rename it to posted_msi_enabled() and make the return value depend on
CONFIG_X86_POSTED_MSI, which allows the compiler to eliminate the related
dead code and data if disabled:
text data bss dec hex filename
10046 701 3296 14043 36db drivers/iommu/intel/irq_remapping.o
9904 413 3296 13613 352d drivers/iommu/intel/irq_remapping.o
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251125214631.170499997@linutronix.de
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when
perf attaches to them. This causes a warning when perf registers
a synthetic event and passes a NULL pointer to the tracepoint register
function. Ideally synthetic events should be updated to work with
perf, but as that's a feature and not a bug fix, simply now return
-ENODEV when perf tries to register an event that has a NULL pointer
for its function. This no longer causes a kernel warning and simply
causes the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to
to be 1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaURuVxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhU1AQCe3AwEiPg4PAooR7D3TDgj4ypJXUwS
J7PM0cvniKhJ2AD/VpSQCyj7sB8UQdVE04SK3hxduVwHIzrBhDe2voC8eQQ=
=C9zF
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS
file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when perf
attaches to them. This causes a warning when perf registers a
synthetic event and passes a NULL pointer to the tracepoint register
function.
Ideally synthetic events should be updated to work with perf, but as
that's a feature and not a bug fix, simply now return -ENODEV when
perf tries to register an event that has a NULL pointer for its
function. This no longer causes a kernel warning and simply causes
the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to to be
1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
* tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix address for jmp mode in t_show()
tracing: Fix UBSAN warning in __remove_instance()
tracing: Do not register unsupported perf events
MAINTAINERS: add tracepoint core-api doc files to TRACING
