The current perf tracks two timestamps for the normal ctx and cgroup.
The same type of variables and similar codes are used to track the
timestamps. In the following patch, the third timestamp to track the
guest time will be introduced.
To avoid the code duplication, add a new struct perf_time_ctx and factor
out a generic function update_perf_time_ctx().
No functional change.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-6-seanjc@google.com
Currently, exposing PMU capabilities to a KVM guest is done by emulating
guest PMCs via host perf events, i.e. by having KVM be "just" another user
of perf. As a result, the guest and host are effectively competing for
resources, and emulating guest accesses to vPMU resources requires
expensive actions (expensive relative to the native instruction). The
overhead and resource competition results in degraded guest performance
and ultimately very poor vPMU accuracy.
To address the issues with the perf-emulated vPMU, introduce a "mediated
vPMU", where the data plane (PMCs and enable/disable knobs) is exposed
directly to the guest, but the control plane (event selectors and access
to fixed counters) is managed by KVM (via MSR interceptions). To allow
host perf usage of the PMU to (partially) co-exist with KVM/guest usage
of the PMU, KVM and perf will coordinate to a world switch between host
perf context and guest vPMU context near VM-Enter/VM-Exit.
Add two exported APIs, perf_{create,release}_mediated_pmu(), to allow KVM
to create and release a mediated PMU instance (per VM). Because host perf
context will be deactivated while the guest is running, mediated PMU usage
will be mutually exclusive with perf analysis of the guest, i.e. perf
events that do NOT exclude the guest will not behave as expected.
To avoid silent failure of !exclude_guest perf events, disallow creating a
mediated PMU if there are active !exclude_guest events, and on the perf
side, disallowing creating new !exclude_guest perf events while there is
at least one active mediated PMU.
Exempt PMU resources that do not support mediated PMU usage, i.e. that are
outside the scope/view of KVM's vPMU and will not be swapped out while the
guest is running.
Guard mediated PMU with a new kconfig to help readers identify code paths
that are unique to mediated PMU support, and to allow for adding arch-
specific hooks without stubs. KVM x86 is expected to be the only KVM
architecture to support a mediated PMU in the near future (e.g. arm64 is
trending toward a partitioned PMU implementation), and KVM x86 will select
PERF_GUEST_MEDIATED_PMU unconditionally, i.e. won't need stubs.
Immediately select PERF_GUEST_MEDIATED_PMU when KVM x86 is enabled so that
all paths are compile tested. Full KVM support is on its way...
[sean: add kconfig and WARNing, rewrite changelog, swizzle patch ordering]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-5-seanjc@google.com
Move the freeing of any security state associated with a perf event from
_free_event() to __free_event(), i.e. invoke security_perf_event_free() in
the error paths for perf_event_alloc(). This will allow adding potential
error paths in perf_event_alloc() that can occur after allocating security
state.
Note, kfree() and thus security_perf_event_free() is a nop if
event->security is NULL, i.e. calling security_perf_event_free() even if
security_perf_event_alloc() fails or is never reached is functionality ok.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-4-seanjc@google.com
Only KVM knows the exact time when a guest is entering/exiting. Expose
two interfaces to KVM to switch the ownership of the PMU resources.
All the pinned events must be scheduled in first. Extend the
perf_event_sched_in() helper to support extra flag, e.g., EVENT_GUEST.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-3-seanjc@google.com
To optimize the cgroup context switch, the perf_event_pmu_context
iteration skips the PMUs without cgroup events. A bool cgroup was
introduced to indicate the case. It can work, but this way is hard to
extend for other cases, e.g. skipping non-mediated PMUs. It doesn't
make sense to keep adding bool variables.
Pass the event_type instead of the specific bool variable. Check both
the event_type and related pmu_ctx variables to decide whether skipping
a PMU.
Event flags, e.g., EVENT_CGROUP, should be cleard in the ctx->is_active.
Add EVENT_FLAGS to indicate such event flags.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-2-seanjc@google.com
Factor out __sort_dimension__update() so that it can be called from -s
and -F option parsing logics. Otherwise the following command cannot go
into the annotation mode.
$ perf report -F overhead,type,sym
Warning: Annotation is only available for symbolic views, include "sym*" in --sort to use it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users can use -F/--fields option to set output fields and sort keys
together.
But it missed to set perf_hpp_list->need_collapse for sort entries that
have se_collapse callbacks.
So it ends up with having duplicated entries separately.
For example, let's run this command first.
$ perf mem record -t load -U -- perf test -w datasym
This will record samples for memory access (load) to struct 'buf' and a
loop condition ('sig_atomic_t') types.
So the following two commands should have identical output.
$ perf report -s type --stdio --percent-limit=1 -q
87.80% perf buf
12.17% perf sig_atomic_t
But using -F option didn't collapse the entries based on types so the
result looked like below:
$ perf report -F overhead,type --stdio --percent-limit=1 -q
23.31% perf buf
22.84% perf buf
21.26% perf buf
20.39% perf buf
12.17% perf sig_atomic_t
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It checked -s/--sort options only. As the sort keys can be setup using
the -F/--fields option as well, it should enable data-type profiling
with it too.
The following two commands should have the same output.
$ perf report -s type
$ perf report -F overhead,type
But there's another problem on this. I'll handle it in the next commit.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
6.1e-5 is very close to 1/16384, where 16384 is 2^14, i.e. a power of
2. When units are in powers of 2 the IEC unit is MiB (mebibytes)
rather than MB (megabytes) where the values are powers of 10.
This patch corrects the unit for uniformity and because such units may
be pattern matched against.
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20251031162637.1456191-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got away with this so far but now with fedora 44 complaining about
the return value of strchr et all, lets use strdup for good measure.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251211221756.96294-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Newer glibc versions return const char for str{str,chr}() where the
haystack/s is const so to avoid warnings like these on fedora 44 change
some variables to const:
36 8.17 fedora:44 : FAIL gcc version 15.2.1 20251111 (Red Hat 15.2.1-4) (GCC)
libbpf.c: In function 'kallsyms_cb':
libbpf.c:8489:13: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
8489 | res = strstr(sym_name, ".llvm.");
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251211221756.96294-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Newer glibc versions return const char for strchr() when the 's' arg is
const, change the return variable to const to match that.
Also we don't need to turn that ',' into a '\0', as strtol() will stop
in the first invalid char. No need to touch read only memory.
First noticed with fedora 44.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251211221756.96294-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is just being set to the return of strchr() but never used, just
ditch it and with it get rid of a warning about it not being const on
fedora 44.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251211221756.96294-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20251217023721.1684244-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20251216043210.1521722-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Document devicetree bindings for the Andes ATCSPI200 SPI controller.
Signed-off-by: CL Wang <cl634@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251215132349.513843-2-cl634@andestech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add driver support for NXP XSPI controller.
XSPI is a flexible SPI host controller which supports up to
2 external devices (2 CS). It support Single/Dual/Quad/Octal
mode data transfer.
The difference between XSPI and Flexspi:
1.the register layout is total different.
2.XSPI support multiple independent execution environments
(EENVs) for HW virtualization with some limitations. Each EENV
has its own interrupt and its own set of programming registers
that exists in a specific offset range in the XSPI memory map.
The main environment (EENV0) address space contains all of the
registers for controlling EENV0 plus all of the general XSPI
control and programming registers. The register mnemonics for
the user environments (EENV1 to EENV4) have "_SUB_n" appended
to the mnemonic for the corresponding main-environment register.
Current driver based on EENV0, which means system already give
EENV0 right to linux.
This driver use SPI memory interface of the SPI framework to
issue flash memory operations. Tested this driver with UBIFS
and mtd_debug on NXP i.MX943 EVK board which has one spi nor
MT35XU512ABA flash. Now this driver has the following key
features:
- Support up to OCT DDR mode
- Support AHB read
- Support IP read and IP write
- Support two CS
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251216-xspi-v7-2-282525220979@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document imx94 xspi that supports interface to serial flash
supporting following features:
- Single-bit SPI, Dual SPI, Quad SPI and Octal SPI.
- Single Data Rate or Double Data Rate modes.
- Direct memory mapping of all AHB memory accesses to the
chip system memory space.
- Multi-master AHB accesses with priority.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251216-xspi-v7-1-282525220979@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
VI Sense module in ADSP is responsible for feedback loop for measuring
current and voltage of amplifiers, necessary for proper calibration of
Speaker Protection algorightms. Implement parsing
MODULE_ID_SPEAKER_PROTECTION_VI from Audioreach topology and sending it
as command to the ADSP.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251217094602.55117-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Speaker Protection is capability of ADSP to adjust the gain during
playback to different speakers and their temperature. This allows good
playback without blowing the speakers up.
Implement parsing MODULE_ID_SPEAKER_PROTECTION from Audioreach topology
and sending it as command to the ADSP.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251217094602.55117-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the use of __free(kfree) in _cs_amp_set_efi_calibration_data()
with normal kfree() at the end of the function.
Krzysztof Kozlowski pointed out that __free() can be dangerous.
It can introduce new cleanup bugs. These are more subtle and difficult to
spot than a missing goto in traditional cleanup, because they are triggered
by writing regular idiomatic C code instead of using C++ conventions. As
it's regular C style it's more likely to be missed because the code is as
would be expected for C. The traditional goto also more obviously flags
to anyone changing the code in the future that they must be careful about
the cleanup.
Arguably the traditional approach is more readable, and it avoids the
manipulation of __free() pointers when the buffer is reallocated for
resizing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251201123906.86876-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports the RAE parameters loading.
The RAE parameters is related to EQ/DRC parameters for each endpoint.
The driver could load these parameters from the binary file.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251216090630.3955323-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA spec allows the sample rate and width to be wild cards, but the
current implementation of set_usage() only checked for a wild card of
the sample rate.
Fixes: 4ed357f72a ("ASoC: SDCA: Add hw_params() helper function")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251216142204.183958-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the functions/controls to support the calibration.
The mixer controls could trigger a calibration and load temperature/r0 value.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251216090616.3955293-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace manual "request_threaded_irq()" with the device managed
"devm_request_threaded_irq" to manage the IRQ lifetime and also
it removes the smatch reported warning.
Remove the manual "free_irq()" in the "remove" function as free_irq
is tied to device teardown.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251217104356.60839-3-hariconscious@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds tas2563 which supports the RT5682 headset codec
and TAS2563 speaker amplifier combination on PantherLake platform.
Signed-off-by: David Lin <david.lin@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251217110433.3558136-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement tas2563 support code in this common module so it could be
shared between multiple SOF machine drivers.
Signed-off-by: David Lin <david.lin@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251217110433.3558136-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is migrated to use threaded IRQ since commit 5972eb05ca
("spi: spi-mt65xx: Use threaded interrupt for non-SPIMEM transfer"), and
we almost always want to disable the interrupt line to avoid excess
interrupts while the threaded handler is processing SPI transfer.
Use IRQF_ONESHOT for that purpose.
In practice, we see MediaTek devices show SPI transfer timeout errors
when communicating with ChromeOS EC in certain scenarios, and with
IRQF_ONESHOT, the issue goes away.
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://patch.msgid.link/20251217101131.1975131-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At least the Microchip Sparx5 supports up to 16 chip-selects, so
increase the maximum. The pattern for the child unit-address was
unconstrained, so update it to match the maximum number of
chip-selects.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251215230323.3634112-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When cqspi_request_mmap_dma() returns -EPROBE_DEFER after runtime PM
is enabled, the error path calls clk_disable_unprepare() on an already
disabled clock, causing an imbalance.
Use pm_runtime_get_sync() to increment the usage counter and resume the
device. This prevents runtime_suspend() from being invoked and causing
a double clock disable.
Fixes: 1406234105 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20251212072312.2711806-3-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dev_err_probe() to log DMA request failures. This properly handles
-EPROBE_DEFER at debug level, reducing log spam during deferred probing.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://patch.msgid.link/20251212072312.2711806-2-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Otherwise there'll be kernel warning:
[ 29.018081] OF: /sound-wm8962: Read of boolean property 'hp-det-gpios' with a value.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20251216071656.648412-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver uses multiple regmaps, which will causes name conflicts
in debugfs like:
debugfs: '30cc0000.xcvr' already exists in 'regmap'
Fix this by adding a name for the non-core regmap configurations.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216084931.553328-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
unexpected behavior
Fix this by adding missing writable register defaults.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset_control handler has the reference count for usage, as there is
reset operation in runtime suspend and resume, then reset operation in
probe() would cause the reference count of reset not balanced.
Previously add reset operation in probe and remove is to fix the compile
issue with !CONFIG_PM, as the driver has been update to use
RUNTIME_PM_OPS(), so that change can be reverted.
Fixes: 1e0dff741b ("ASoC: ak4458: remove "reset-gpios" property handler")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251216070201.358477-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver registers a component for asrc. This is also used together
with easrc, both attached using the device name as component name.
Eventually debugfs directories with identical name are created in
soc_init_component_debugfs(), leading to error message:
debugfs: '30c90000.easrc' already exists in 'tqm-tlv320aic32'
Fix this by adding the debugfs_prefix.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20251216094045.623184-3-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver registers two components: asrc and easrc, both attached using
the device name as component name. Eventually debugfs directories with
identical name are created in soc_init_component_debugfs(), leading to
error message:
debugfs: '30c90000.easrc' already exists in 'tqm-tlv320aic32'
Fix this by adding the debugfs_prefix.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20251216094045.623184-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 47efe2ddcc ("sched/core: Add assertions to QUEUE_CLASS") added an
assert to sched_change_end() verifying that a class demotion would result in a
reschedule.
As it turns out; rt_mutex_setprio() does not force a resched on class
demontion. Furthermore, this is only relevant to running tasks.
Change the warning into a reschedule and make sure to only do so for running
tasks.
Fixes: 47efe2ddcc ("sched/core: Add assertions to QUEUE_CLASS")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251216141725.GW3707837@noisy.programming.kicks-ass.net
Change sched_class::wakeup_preempt() to also get called for
cross-class wakeups, specifically those where the woken task
is of a higher class than the previous highest class.
In order to do this, track the current highest class of the runqueue
in rq::next_class and have wakeup_preempt() track this upwards for
each new wakeup. Additionally have schedule() re-set the value on
pick.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251127154725.901391274@infradead.org
There is a theoretical race window in j1939_sk_netdev_event_unregister()
where two j1939_sk_bind() calls jump in between read_unlock_bh() and
lock_sock().
The assumption jsk->priv == priv can fail if the first j1939_sk_bind()
call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call
and the second j1939_sk_bind() call again made jsk->priv != NULL due to
successful j1939_local_ecu_get() call.
Since the socket lock is held by both j1939_sk_netdev_event_unregister()
and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can
reliably make the second j1939_sk_bind() call fail (and close this race
window).
Fixes: 7fcbe5b2c6 ("can: j1939: implement NETDEV_UNREGISTER notification handler")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/5732921e-247e-4957-a364-da74bd7031d7@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/b9653191-d479-4c8b-8536-1326d028db5c@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
43935 11632 384 55951 da8f drivers/gpio/gpio-aggregator.o
After:
=====
text data bss dec hex filename
44191 11376 384 55951 da8f drivers/gpio/gpio-aggregator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ccb5155342ce6dbb89cfbad0687b448860d8e8f0.1765703044.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
