Drop the redundant initialisation and return explicit zero on successful
probe to make the code more readable.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421130211.1537628-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the controller is not runtime suspended before disabling
clocks on probe failure.
Also restore the autosuspend setting.
Fixes: 5c6786945b ("spi: spi-orion: add runtime PM support")
Cc: stable@vger.kernel.org # 3.17
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421130211.1537628-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to balance the runtime PM usage count before returning on
probe failure (e.g. probe deferral) so that the controller can be
suspended when a driver is later bound.
Fixes: 43b6bf406c ("spi: imx: fix runtime pm support for !CONFIG_PM")
Cc: stable@vger.kernel.org # 5.10
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125632.1537235-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The current kmemdup() based allocation for IOMAP_INLINE can result in
inline_data pointer having a non-zero page offset. This causes
iomap_inline_data_valid() to fail the check:
iomap->length <= PAGE_SIZE - offset_in_page(iomap->inline_data)
and triggers the kernel BUG at fs/iomap/buffered-io.c:1061.
This particularly affects workloads with frequent small file access
(e.g. Firefox Nightly profile on NTFS with bind mount) when using the
new ntfs. This fix this by allocating a full page with alloc_page() so that
page_address() always returns a page-aligned address.
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Linus pointed out that checking only VMA_WRITE_BIT is incorrect.
Private writable mappings (MAP_PRIVATE) set VM_WRITE but do not
write back to the filesystem. Also, mappings that can become
writable via mprotect() (VM_MAYWRITE) must be handled.
Use vma_desc_test_all(VMA_SHARED_BIT, VMA_MAYWRITE_BIT) instead,
which matches what other filesystems do.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Currently, LoongArch bpf trampoline supports up to 8 function arguments.
According to the statistics from commit 473e3150e3 ("bpf, x86: allow
function arguments up to 12 for TRACING"), there are over 200 functions
accept 9 to 12 arguments, so add 12 arguments support for trampoline.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_many_args
sudo ./test_progs -a fentry_test/fentry_many_args
sudo ./test_progs -a fexit_test/fexit_many_args
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current BPF code, the struct argument size is at most 16 bytes,
enforced by the verifier. According to the Procedure Call Standard for
LoongArch, the struct argument size below 16 bytes are provided as part
of the 8 argument registers, that is to say, the struct argument may be
passed in a pair of registers if its size is more than 8 bytes and no
more than 16 bytes.
Extend the BPF trampoline JIT to support attachment to functions that
take small structures (up to 16 bytes) as argument, save and restore a
number of "argument registers" rather than a number of arguments.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_args
sudo ./test_progs -a tracing_struct/union_args
Link: https://github.com/loongson/la-abi-specs/blob/release/lapcs.adoc#structures
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
invoke_bpf_mod_ret() is a small wrapper over invoke_bpf_prog(), it
should check the return value of invoke_bpf_prog() and then return
immediately if invoke_bpf_prog() failed, just open code and remove
it due to it is called only once.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use the LoongArch common memory access instructions with the barrier
'dbar' to support the BPF load-acquire and store-release instructions.
With this patch, the following testcases passed on LoongArch if the
macro CAN_USE_LOAD_ACQ_STORE_REL is usable in bpf selftests:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write instructions {amadd/amswap}.{b/h}
were newly added in the latest LoongArch Reference Manual, use them to
avoid the error of unknown opcode if possible.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like the other archs such as x86 and riscv, add the default case
in emit_atomic() to print an error message for the invalid opcode
and return -EINVAL, then make its return type as int.
While at it, given that all of the instructions in emit_atomic()
are only read-modify-write instructions, rename emit_atomic() to
emit_atomic_rmw() to make it clear, because there will be a new
function emit_atomic_ld_st() for load-acquire and store-release
instructions in the later patch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write atomic instructions amadd.{b/h} and
amswap.{b/h} were newly added in the latest LoongArch Reference Manual,
define the instruction format and check whether support via CPUCFG.
Furthermore, define the instruction format for DBAR which will be used
to support BPF load-acquire and store-release instructions.
This is preparation for later patches.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Switch to the batched version of the jump label update functions so
instruction cache maintenance is deferred until the end of the update.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch maintains ICache/DCache coherency by hardware, so we just need
"ibar 0" to avoid instruction hazard here.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables.
Cc: stable@vger.kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Most LoongArch processors are vulnerable to Spectre-V1 Proof-of-Concept
(PoC). And the generic mechanism, __user pointer sanitization, can be
used as a mitigation. This means to use array_index_nospec() to prevent
out of boundry access in syscall and other critical paths.
Implement the arch-specific cpu_show_spectre_v1() to show CPU Spectre-V1
vulnerabilites correctly.
Cc: stable@vger.kernel.org
Link: https://cc-sw.com/chinese-loongarch-architecture-evaluation-part-3-of-3/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit 7c405fb327 ("rcu: Use an intermediate irq_work to
start process_srcu()"), Loongson-2K0300/2K0500 fail to boot. Because
IRQ_WORK need IPI but Loongson-2K0300/2K0500 don't have IPI HW.
So make arch_irq_work_has_interrupt() return true only if IPI HW exist.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like others, replace the custom stack canary initialization with the
get_random_canary() helper, following the pattern established in commit
622754e84b ("stackprotector: actually use get_random_canary()").
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Whether KASLR is disabled is not handled in nokaslr() which is the early
param "nokaslr" setup function, but in kaslr_disabled(). However, the
logging was previously done in nokaslr() and lack detail. So we move the
logging to the right place and add more specific infomation about why it
is disabled.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuqian Yang <yangyuqian@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Move fpr to the beginning of struct loongarch_fpu so it is naturally
aligned to FPU_ALIGN (32 bytes), improving 256-bit SIMD (LASX) context
switch performance.
Also adjust process.c and fpu.S to work well with the new loongarch_fpu
layout.
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If CONFIG_32BIT is set, it should return AUDIT_ARCH_LOONGARCH32 instead
of AUDIT_ARCH_LOONGARCH64 in syscall_get_arch().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add HIGHMEM (High Memory) support for LoongArch, mostly needed by 32BIT
kernel because the size of kernel virtual memory space is only 512MB and
the size of usable physical memory is only 256MB in this case.
HIGHMEM adds permanent kernel mapping (PKMAP) and fixed kernel mapping
(FIX_KMAP), which increase usable physical memory up to 2.25GB (2304MB).
We can just use the generic copy_user_highpage(), so remove the custom
version.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After a kexec the logical processors and virtual processors already
exist in the hypervisor because they were created by the previous
kernel. Attempting to add them again causes either a BUG_ON or
corrupted VP state leading to MCEs in the new kernel.
Add hv_lp_exists() to probe whether an LP is already present by
calling HVCALL_GET_LOGICAL_PROCESSOR_RUN_TIME. When it succeeds the
LP exists and we skip the add-LP and create-VP loops entirely.
Also add hv_call_notify_all_processors_started() which informs the
hypervisor that all processors are online. This is required after
adding LPs (fresh boot) and is a no-op on kexec since we skip that
path.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Co-developed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Move hv_stimer_global_cleanup() from vmbus's hv_kexec_handler() to
hv_machine_shutdown() in the platform code. This ensures stimer cleanup
happens before the vmbus unload, which is required for root partition
kexec to work correctly.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
vmbus_alloc_synic_and_connect() declares a local 'int
hyperv_cpuhp_online' that shadows the file-scope global of the same
name. The cpuhp state returned by cpuhp_setup_state() is stored in
the local, leaving the global at 0 (CPUHP_OFFLINE). When
hv_kexec_handler() or hv_machine_shutdown() later call
cpuhp_remove_state(hyperv_cpuhp_online) they pass 0, which hits the
BUG_ON in __cpuhp_remove_state_cpuslocked().
Remove the local declaration so the cpuhp state is stored in the
file-scope global where hv_kexec_handler() and hv_machine_shutdown()
expect it.
Fixes: 2647c96649 ("Drivers: hv: Support establishing the confidential VMBus connection")
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Provide visibility into GPA intercept operations for debugging and
performance analysis of Microsoft Hypervisor guest memory management.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
atmel_tcb_pwm_apply() holds tcbpwmc->lock as a spinlock via
guard(spinlock)() and then calls atmel_tcb_pwm_config(), which calls
clk_get_rate() twice. clk_get_rate() acquires clk_prepare_lock (a
mutex), so this is a sleep-in-atomic-context violation.
On CONFIG_DEBUG_ATOMIC_SLEEP kernels every pwm_apply_state() that
enables or reconfigures the PWM triggers a "BUG: sleeping function
called from invalid context" warning.
Acquire exclusive control over the clock rates with
clk_rate_exclusive_get() at probe time and cache the rates in struct
atmel_tcb_pwm_chip, then read the cached rates from
atmel_tcb_pwm_config(). This keeps the spinlock-based mutual exclusion
introduced in commit 37f7707077 ("pwm: atmel-tcb: Fix race condition
and convert to guards") and removes the sleeping calls from the atomic
section.
With no sleeping calls left in .apply() and the regmap-mmio bus already
running with fast_io=true, also mark the chip as atomic so consumers
can use pwm_apply_atomic() from atomic context.
Fixes: 37f7707077 ("pwm: atmel-tcb: Fix race condition and convert to guards")
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Link: https://patch.msgid.link/20260419080838.3192357-1-sangyun.kim@snu.ac.kr
[ukleinek: Ensure .clk is enabled before calling clk_get_rate on it.]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Under !CONFIG_MMU, io_uring_get_unmapped_area() returns the kernel
virtual address of the io_mapped_region's backing pages directly;
the user's VMA aliases the kernel allocation. io_uring_mmap() then
just returns 0 -- it takes no page references.
The CONFIG_MMU path uses vm_insert_pages(), which takes a reference on
each inserted page. Those references are released when the VMA is torn
down (zap_pte_range -> put_page). io_free_region() -> release_pages()
drops the io_uring-side references, but the pages survive until munmap
drops the VMA-side references.
Under NOMMU there are no VMA-side references. io_unregister_pbuf_ring ->
io_put_bl -> io_free_region -> release_pages drops the only references
and the pages return to the buddy allocator while the user's VMA still
has vm_start pointing into them. The user can then write into whatever
the allocator hands out next.
Mirror the MMU lifetime: take get_page references in io_uring_mmap() and
release them via vm_ops->close. NOMMU's delete_vma() calls vma_close()
which runs ->close on munmap.
This also incidentally addresses the duplicate-vm_start case: two mmaps
of SQ_RING and CQ_RING resolve to the same ctx->ring_region pointer.
With page refs taken per mmap, the second mmap takes its own refs and
the pages survive until both mmaps are closed. The nommu rb-tree BUG_ON
on duplicate vm_start is a separate mm/nommu.c concern (it should share
the existing region rather than BUG), but the page lifetime is now
correct.
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Anthropic
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042115-body-attention-d15b@gregkh
[axboe: get rid of region lookup, just iterate pages in vma]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- fprobe: Fixed several bugs, which includes followings:
. Prevention of re-registration: Added an earlier check to reject
re-registering an already active fprobe before its state is modified
during the initialization phase.
. Robustness in failure paths:
- Ensured fprobes are correctly removed from all internal tables and
properly RCU-freed during registration failure.
- Modified unregister_fprobe() to proceed with unregistration even if
temporary memory allocation fails.
. RCU safety in module unloading: Avoided a potential "sleep in RCU"
warning by removing a kcalloc() call in the module notifier path. This
also tries to remove fprobe_hash_node even if memory allocation fails.
. Type-aware unregistration: Fixed a bug where unregistering an fprobe
did not account for different types (entry-only vs. entry-exit) at the
same address, which previously left "junk" entries in the underlying
ftrace/fgraph ops.
. Unregistration of empty ftrace_ops: Avoided unneeded performance
overhead because of making registered ftrace_ops empty (means trace
all functions.) This counts remaining entries and unregister ftrace_ops
when it becomes empty.
- ftracetest: In addition to the fix, two new selftests to check above
fixes, are included:
. Module Unloading Test: Specifically verifies that fprobe events on
a module are correctly cleaned up and do not trigger "trace-all"
behavior when the module is removed.
. Multiple Fprobe Events Test: Ensures that having multiple fprobes on
the same function correctly manages the ftrace hash map during
removal.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmnoGFUbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bvR8H/3f+lFlflidmqgjW+dy5
cB73jVVznarkvVr2AdR1KpNv3V9qjLCWAiUM6sDI79mbMNbOKh44EkEX9P5actNq
3e4NofYr8TyfnJfD6tnrevjhZspCbvRWKVc2+gY9EIi9XUxSRjGuv/5VkIa5HMAN
3Zg++U0mYBTEAn59nGR++GakMuF/UJChOC5eVKpVYjtRLQ+TzWe6nwBhXj6PrhVT
OjZN4LHLH/Eze+Suk2duBDt0RQhfPqiz8yW7eP6TzxkS/DN+hmgoQ/zqFjndPsmc
1TnJ1iJLJ5vo0SqtuCKDv9OTc1oclMCYYdzCxEOnrfFXX4BXxGjzcEd7sjINHMKd
kBY=
=9oav
-----END PGP SIGNATURE-----
Merge tag 'probes-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe bug fixes:
- Prevent re-registration
Add an earlier check to reject re-registering an already active
fprobe before its state is modified during the initialization phase
- Robustness in failure paths:
- Ensure fprobes are correctly removed from all internal tables
and properly RCU-freed during registration failure
- Make unregister_fprobe() proceed with unregistration even if
temporary memory allocation fails
- RCU safety in module unloading
Avoid a potential "sleep in RCU" warning by removing a kcalloc()
call in the module notifier path. This also tries to remove
fprobe_hash_node even if memory allocation fails.
- Type-aware unregistration
Fix a bug where unregistering an fprobe did not account for
different types (entry-only vs entry-exit) at the same address,
which previously left "junk" entries in the underlying
ftrace/fgraph ops
- Unregistration of empty ftrace_ops
Avoid unneeded performance overhead due to making registered
ftrace_ops empty - which means 'trace all functions'. This counts
remaining entries and unregister ftrace_ops when it becomes empty.
Two new selftests to check above fixes:
- Module Unloading Test:
Specifically verifies that fprobe events on a module are correctly
cleaned up and do not trigger 'trace-all' behavior when the module
is removed.
- Multiple Fprobe Events Test:
Ensure that having multiple fprobes on the same function correctly
manages the ftrace hash map during removal"
* tag 'probes-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add a testcase for multiple fprobe events
selftests/ftrace: Add a testcase for fprobe events on module
tracing/fprobe: Fix to unregister ftrace_ops if it is empty on module unloading
tracing/fprobe: Check the same type fprobe on table as the unregistered one
tracing/fprobe: Avoid kcalloc() in rcu_read_lock section
tracing/fprobe: Remove fprobe from hash in failure path
tracing/fprobe: Unregister fprobe even if memory allocation fails
tracing/fprobe: Reject registration of a registered fprobe before init
Commit:
aacf2f9f38 ("io_uring: fix req->apoll_events")
fixed an issue where poll->events and req->apoll_events weren't
synchronized, but then when the commit referenced in Fixes got added,
it didn't ensure the same thing.
If we mask in EPOLLONESHOT in the regular EPOLL_URING_WAKE path, then
ensure it's done for both. Including a link to the original report
below, even though it's mostly nonsense. But it includes a reproducer
that does show that IORING_CQE_F_MORE is set in the previous CQE,
while no more CQEs will be generated for this request. Just ignore
anything that pretends this is security related in any way, it's just
the typical AI nonsense.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAM0zi7yQzF3eKncgHo4iVM5yFLAjsiob_ucqyWKs=hyd_GqiMg@mail.gmail.com/
Reported-by: Azizcan Daştan <azizcan.d@mileniumsec.com>
Fixes: 4464853277 ("io_uring: pass in EPOLL_URING_WAKE for eventfd signaling and wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If ecdb_ahdr->ahslength is zero, two bugs follow:
kmalloc(be16_to_cpu(ecdb_ahdr->ahslength) + 15, ...)
allocates 15 bytes, but the immediately following memcpy writes
ISCSI_CDB_SIZE (16) bytes into it, a one-byte heap overflow. Also:
memcpy(cdb + ISCSI_CDB_SIZE, ecdb_ahdr->ecdb,
be16_to_cpu(ecdb_ahdr->ahslength) - 1);
(u16)0 - 1 promotes to (int)-1 which converts to SIZE_MAX as size_t,
causing a massive out-of-bounds write.
Reject ahslength == 0 with ISCSI_REASON_PROTOCOL_ERROR before the kmalloc.
Also reject ahslength values that exceed the actual AHS buffer advertised.
Fixes: 8f1f7d297b ("scsi: target: iscsi: Add support for extended CDB AHS")
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20260415040728.187680-1-carlos.bilbao@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the UFS spec, the bRefClkFreq attribute can only be written
when both sub-links are in LS-MODE. However, in HS LSS mode with
resetmode = HS_MODE, if the UFS device's default bRefClkFreq value
differs from the host controller's dev_ref_clk_freq setting, the write
operation will fail.
To fix this issue, introduce ufshcd_get_op_mode() function to detect the
current link operational mode. Call ufshcd_set_dev_ref_clk() only when
both sub-links are in LS-MODE to ensure the attribute can be written
successfully.
Signed-off-by: Wang Shuaiwei <wangshuaiwei1@xiaomi.com>
Link: https://patch.msgid.link/20260414033718.1459540-1-wangshuaiwei1@xiaomi.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drm:
- Add support for AMD VSDB parsing to drm_edid
dma-buf:
- fix documentation formatting
i915:
- add support for reordered pipes to support joined pipes better
- Fix VESA backlight possible check condition
- Verify the correct plane DDB entry
amdgpu:
- Audio regression fix
- Use drm edid parser for AMD VSDB
- Misc cleanups
- VCE cs parse fixes
- VCN cs parse fixes
- RAS fixes
- Clean up and unify vram reservation handling
- GPU Partition updates
- system_wq cleanups
- Add CONFIG_GCOV_PROFILE_AMDGPU kconfig option
- SMU vram copy updates
- SMU 13/14/15 fixes
- UserQ fixes
- Replace pasid idr with an xarray
- Dither handling fix
- Enable amdgpu by default for CIK APUs
- Add IBs to devcoredump
amdkfd:
- system_wq cleanups
radeon:
- system_wq cleanups
-----BEGIN PGP SIGNATURE-----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=NmlO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-04-22' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm updates from Dave Airlie:
"This is a followup which is mostly next material with some fixes.
Alex pointed out I missed one of his AMD MRs from last week, so I
added that, then Jani sent the pipe reordering stuff, otherwise it's
just some minor i915 fixes and a dma-buf fix.
drm:
- Add support for AMD VSDB parsing to drm_edid
dma-buf:
- fix documentation formatting
i915:
- add support for reordered pipes to support joined pipes better
- Fix VESA backlight possible check condition
- Verify the correct plane DDB entry
amdgpu:
- Audio regression fix
- Use drm edid parser for AMD VSDB
- Misc cleanups
- VCE cs parse fixes
- VCN cs parse fixes
- RAS fixes
- Clean up and unify vram reservation handling
- GPU Partition updates
- system_wq cleanups
- Add CONFIG_GCOV_PROFILE_AMDGPU kconfig option
- SMU vram copy updates
- SMU 13/14/15 fixes
- UserQ fixes
- Replace pasid idr with an xarray
- Dither handling fix
- Enable amdgpu by default for CIK APUs
- Add IBs to devcoredump
amdkfd:
- system_wq cleanups
radeon:
- system_wq cleanups"
* tag 'drm-next-2026-04-22' of https://gitlab.freedesktop.org/drm/kernel: (62 commits)
drm/i915/display: change pipe allocation order for discrete platforms
drm/i915/wm: Verify the correct plane DDB entry
drm/i915/backlight: Fix VESA backlight possible check condition
drm/i915: Walk crtcs in pipe order
drm/i915/joiner: Make joiner "nomodeset" state copy independent of pipe order
dma-buf: fix htmldocs error for dma_buf_attach_revocable
drm/amdgpu: dump job ibs in the devcoredump
drm/amdgpu: store ib info for devcoredump
drm/amdgpu: extract amdgpu_vm_lock_by_pasid from amdgpu_vm_handle_fault
drm/amdgpu: Use amdgpu by default for CIK APUs too
drm/amd/display: Remove unused NUM_ELEMENTS macros
drm/amd/display: Replace inline NUM_ELEMENTS macro with ARRAY_SIZE
drm/amdgpu: save ring content before resetting the device
drm/amdgpu: make userq fence_drv drop explicit in queue destroy
drm/amdgpu: rework userq fence driver alloc/destroy
drm/amdgpu/userq: use dma_fence_wait_timeout without test for signalled
drm/amdgpu/userq: call dma_resv_wait_timeout without test for signalled
drm/amdgpu/userq: add the return code too in error condition
drm/amdgpu/userq: fence wait for max time in amdgpu_userq_wait_for_signal
drm/amd/display: Change dither policy for 10 bpc output back to dithering
...
Fix fprobe to unregister ftrace_ops if corresponding type of fprobe
does not exist on the fprobe_ip_table and it is expected to be empty
when unloading modules.
Since ftrace thinks that the empty hash means everything to be traced,
if we set fprobes only on the unloaded module, all functions are traced
unexpectedly after unloading module.
e.g.
# modprobe xt_LOG.ko
# echo 'f:test log_tg*' > dynamic_events
# echo 1 > events/fprobes/test/enable
# cat enabled_functions
log_tg [xt_LOG] (1) tramp: 0xffffffffa0004000 (fprobe_ftrace_entry+0x0/0x490) ->fprobe_ftrace_entry+0x0/0x490
log_tg_check [xt_LOG] (1) tramp: 0xffffffffa0004000 (fprobe_ftrace_entry+0x0/0x490) ->fprobe_ftrace_entry+0x0/0x490
log_tg_destroy [xt_LOG] (1) tramp: 0xffffffffa0004000 (fprobe_ftrace_entry+0x0/0x490) ->fprobe_ftrace_entry+0x0/0x490
# rmmod xt_LOG
# wc -l enabled_functions
34085 enabled_functions
Link: https://lore.kernel.org/all/177669368776.132053.10042301916765771279.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add complete infrastructure for per-subvolume I/O metrics collection
and reporting to the MDS. This enables administrators to monitor I/O
patterns at the subvolume granularity, which is useful for multi-tenant
CephFS deployments.
This patch adds:
- CEPHFS_FEATURE_SUBVOLUME_METRICS feature flag for MDS negotiation
- CEPH_SUBVOLUME_ID_NONE constant (0) for unknown/unset state
- Red-black tree based metrics tracker for efficient per-subvolume
aggregation with kmem_cache for entry allocations
- Wire format encoding matching the MDS C++ AggregatedIOMetrics struct
- Integration with the existing CLIENT_METRICS message
- Recording of I/O operations from file read/write and writeback paths
- Debugfs interfaces for monitoring (metrics/subvolumes, metrics/metric_features)
Metrics tracked per subvolume include:
- Read/write operation counts
- Read/write byte counts
- Read/write latency sums (for average calculation)
The metrics are periodically sent to the MDS as part of the existing
metrics reporting infrastructure when the MDS advertises support for
the SUBVOLUME_METRICS feature.
CEPH_SUBVOLUME_ID_NONE enforces subvolume_id immutability. Following
the FUSE client convention, 0 means unknown/unset. Once an inode has
a valid (non-zero) subvolume_id, it should not change during the
inode's lifetime.
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for parsing the subvolume_id field from InodeStat v9 and
storing it in the inode for later use by subvolume metrics tracking.
The subvolume_id identifies which CephFS subvolume an inode belongs to,
enabling per-subvolume I/O metrics collection and reporting.
This patch:
- Adds subvolume_id field to struct ceph_mds_reply_info_in
- Adds i_subvolume_id field to struct ceph_inode_info
- Parses subvolume_id from v9 InodeStat in parse_reply_info_in()
- Adds ceph_inode_set_subvolume() helper to propagate the ID to inodes
- Initializes i_subvolume_id in inode allocation and clears on destroy
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add forward-compatible handling for the new versioned field introduced
in InodeStat v8. This patch only skips the field without using it,
preparing for future protocol extensions.
The v8 encoding adds a versioned sub-structure that needs to be properly
decoded and skipped to maintain compatibility with newer MDS versions.
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 41ebcc0907 ("crush: remove forcefeed functionality") from
May 7, 2012 (linux-next), leads to the following Smatch static
checker warning:
net/ceph/crush/mapper.c:1015 crush_do_rule()
warn: iterator 'j' not incremented
Before commit 41ebcc0907 ("crush: remove forcefeed functionality"),
we had this logic:
j = 0;
if (osize == 0 && force_pos >= 0) {
o[osize] = force_context[force_pos];
if (recurse_to_leaf)
c[osize] = force_context[0];
j++; /* <-- this was the only increment, now gone */
force_pos--;
}
/* then crush_choose_*(..., o+osize, j, ...) */
Now, the variable j is dead code — a variable that is set
and never meaningfully varied. This patch simply removes
the dead code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This MDS reconnect error path leaves s_cap_reconnect set.
send_mds_reconnect() sets the bit at the beginning of the reconnect,
but the first failing operation after that, ceph_pagelist_encode_32(),
can jump to `fail:` without clearing it.
__ceph_remove_cap() consults that flag to decide whether cap releases
should be queued. A reconnect-preparation failure therefore leaves the
session in reconnect mode from the cap-release path's point of view
and can strand release work until some later state transition repairs
it.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ceph can call d_add(dentry, NULL) on a negative dentry that is already
present in the primary dcache hash.
In the current VFS that is not safe. d_add() goes through __d_add()
to __d_rehash(), which unconditionally reinserts dentry->d_hash into
the hlist_bl bucket. If the dentry is already hashed, reinserting the
same node can corrupt the bucket, including creating a self-loop.
Once that happens, __d_lookup() can spin forever in the hlist_bl walk,
typically looping only on the d_name.hash mismatch check and
eventually triggering RCU stall reports like this one:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829
rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192)
CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023
RIP: 0010:__d_lookup+0x46/0xb0
Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f
RSP: 0018:ff745a70c8253898 EFLAGS: 00000282
RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966
RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0
RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89
R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0
R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f
FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0
PKRU: 55555554
Call Trace:
<TASK>
lookup_fast+0x9f/0x100
walk_component+0x1f/0x150
link_path_walk+0x20e/0x3d0
path_lookupat+0x68/0x180
filename_lookup+0xdc/0x1e0
vfs_statx+0x6c/0x140
vfs_fstatat+0x67/0xa0
__do_sys_newfstatat+0x24/0x60
do_syscall_64+0x6a/0x230
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is reachable with reused cached negative dentries. A Ceph lookup
or atomic_open can be handed a negative dentry that is already hashed,
and fs/ceph/dir.c then hits one of two paths that incorrectly assume
"negative" also means "unhashed":
- ceph_finish_lookup():
MDS reply is -ENOENT with no trace
-> d_add(dentry, NULL)
- ceph_lookup():
local ENOENT fast path for a complete directory with shared caps
-> d_add(dentry, NULL)
Both paths can therefore re-add an already-hashed negative dentry.
Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only
calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn)
is true.
Fix both fs/ceph/dir.c sites the same way: only call d_add() for a
negative dentry when it is actually unhashed. If the negative dentry
is already hashed, leave it in place and reuse it as-is.
This preserves the existing behavior for unhashed dentries while
avoiding d_hash list corruption for reused hashed negatives.
Cc: stable@vger.kernel.org
Fixes: 2817b000b0 ("ceph: directory operations")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The function try_write() was renamed to ceph_con_v1_try_write()
in commit 566050e17e ("libceph: separate msgr1 protocol
implementation") and subsequently moved to net/ceph/messenger_v1.c
in commit 2f713615dd ("libceph: move msgr1 protocol implementation
to its own file"). Update the comment in ceph_sock_write_space()
accordingly.
[ idryomov: account for msgr2 in the updated comment as well ]
Signed-off-by: kexinsun <kexinsun@smail.nju.edu.cn>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since the call to crypto_shash_setkey() was replaced with
hmac_sha256_preparekey() which doesn't allocate memory regardless of the
alignment of the input key, remove the session key alignment logic from
process_auth_done(). Also remove the inclusion of crypto/hash.h, which
is no longer needed since crypto_shash is no longer used.
[ idryomov: rewrap comment ]
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
