Fix another KMSAN warning that made it in while KMSAN wasn't working
reliably.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaSITwxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK898AQCZFgPxQxVrkSaZuDXJ1V5ZpH/PcQVe
RWsmR6TtVE84QQD/a/mteTNxeB0xDFCrhgYG4TmF1g/RhPTTdBTmhubSdwo=
=VNQT
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix another KMSAN warning that made it in while KMSAN wasn't working
reliably"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Fix KMSAN warning in test_sha256_finup_2x()
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaSGL+QAKCRBcsMJ8RxYu
YyvcAXsECiSerKCBGTXpRTLlxB59UWhjRkz2pKhMYLd4czYsukPqTmEergwkQeVN
Ebb5rlMBegJoUfeL//wDZ3D/w/T4E2bEMhlcVH04vEE+yBkuqKqcfNDftQl5MCoD
/1JI9xbKAQ==
=3pbL
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Carlos Maiolino:
"A single out-of-bounds fix, nothing special"
* tag 'xfs-fixes-6.18-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix out of bounds memory read error in symlink repair
One target driver fix and one scsi-generic one. The latter is 10
lines because the problem lock has to be dropped and re-taken around
the call causing the sleep in atomic.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaSHVghsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIW+xQEAx4Sfjb+NTZ4qcDX2wjAosFUnuu5RUnn6
YG1OSrzHHP4A/RQQIxerooZPSD67LxIFVsxCV3yu6S88+n4P3emAec3V
=qUHX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One target driver fix and one scsi-generic one. The latter is 10 lines
because the problem lock has to be dropped and re-taken around the
call causing the sleep in atomic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: Do not sleep in atomic context
scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it causes
issues when there is no pull up resistor installed on the board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaSFbUAAKCRBAj56VGEWX
nC+zAQCmxIsTcA4GEPgelW0dRaaKCcCnr++0RQVW5hFJ+0VgTgD6AlzkMtdy5O30
91gz5ooMKSz5SMsgb97N2GlayGKezA0=
=dMey
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
- Correct the MIPS RISC-V/JEDEC vendor ID.
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation doesn't
support the older v0.1 system shutdown method.
- Align some tools/ macro definitions with the corresponding kernel headers.
-----BEGIN PGP SIGNATURE-----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=aw1W
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
-----BEGIN PGP SIGNATURE-----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=32VE
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux patches for v6.18 to fix issues around accessing the
per-task decision cache that we introduced in v6.16 to help reduce
SELinux overhead on path walks. The problem was that despite the cache
being located in the SELinux "task_security_struct", the parent struct
wasn't actually tied to the task, it was tied to a cred.
Historically SELinux did locate the task_security_struct in the
task_struct's security blob, but it was later relocated to the cred
struct when the cred work happened, as it made the most sense at the
time.
Unfortunately we never did the task_security_struct to
cred_security_struct rename work (avoid code churn maybe? who knows)
because it didn't really matter at the time. However, it suddenly
became a problem when we added a per-task cache to a per-cred object
and didn't notice because of the old, no-longer-correct struct naming.
Thanks to KCSAN for flagging this, as the silly humans running things
forgot that the task_security_struct was a big lie.
This contains three patches, only one of which actually fixes the
problem described above and moves the SELinux decision cache from the
per-cred struct to a newly (re)created per-task struct.
The other two patches, which form the bulk of the diffstat, take care
of the associated renaming tasks so we can hopefully avoid making the
same stupid mistake in the future.
For the record, I did contemplate sending just a fix for the cache,
leaving the renaming patches for the upcoming merge window, but the
type/variable naming ended up being pretty awful and would have made
v6.18 an outlier stuck between the "old" names and the "new" names in
v6.19. The renaming patches are also fairly mechanical/trivial and
shouldn't pose much risk despite their size.
TLDR; naming things may be hard, but if you mess it up bad things
happen"
* tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: rename the cred_security_struct variables to "crsec"
selinux: move avdcache to per-task security struct
selinux: rename task_security_struct to cred_security_struct
Current code retrieving platform devices MSI devID in the GIC ITS MSI
parent helpers suffers from some minor issues:
- It leaks a struct device_node reference
- It is duplicated between GICv3 and GICv5 for no good reason
- It does not use the OF phandle iterator code that simplifies
the msi-parent property parsing
Consolidate GIC v3 and v5 deviceID retrieval in a function that addresses
the full set of issues in one go by merging GIC v3 and v5 code and
converting the msi-parent parsing loop to the more modern OF phandle
iterator API, fixing the struct device_node reference leak in the process.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-6-lpieralisi@kernel.org
The functionality implemented in the iproc driver in order to detect an
OF MSI controller node is now fully implemented in of_msi_xlate().
Replace the current msi-map/msi-parent parsing code with of_msi_xlate().
Since of_msi_xlate() is also a deviceID mapping API, pass in a fictitious
0 as deviceID - the driver only requires detecting the OF MSI controller
node not the deviceID mapping per-se (of_msi_xlate() return value is
ignored for the same reason).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251021124103.198419-5-lpieralisi@kernel.org
The "shareable_bits" and "bit_usage" resctrl files associated with cache
resources give insight into how instances of a cache is used.
Update the annotated capacity bitmasks displayed by "bit_usage" to include the
cache portions allocated for I/O via the "io_alloc" feature. "shareable_bits"
is a global bitmask of shareable cache with I/O and can thus not present the
per-domain I/O allocations possible with the "io_alloc" feature. Revise the
"shareable_bits" documentation to direct users to "bit_usage" for accurate
cache usage information.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e02a0d424129fd7f3e45822a559b1c614ae4652a.1762995456.git.babu.moger@amd.com
The io_alloc feature in resctrl enables system software to configure the
portion of the cache allocated for I/O traffic. When supported, the
io_alloc_cbm file in resctrl provides access to capacity bitmasks (CBMs)
allocated for I/O devices.
Enable users to modify io_alloc CBMs by writing to the io_alloc_cbm resctrl
file when the io_alloc feature is enabled.
Mirror the CBMs between CDP_CODE and CDP_DATA when CDP is enabled to present
consistent I/O allocation information to user space.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/67609641b03ccfba18a8ee0bf9dbd1f3dcbecda3.1762995456.git.babu.moger@amd.com
A report from Oleg Smirnov indicates that the unusual_devs quirks
entry for the Novatek camera does not need to override the subclass
and protocol parameters:
[3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00
[3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3266355.333043] usb 1-3: Product: YICARCAM
[3266355.333045] usb 1-3: Manufacturer: XIAO-YI
[3266355.333047] usb 1-3: SerialNumber: 966110000000100
[3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected
[3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000
[3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1)
Please send a copy of this message to
<linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>
The overrides are harmless but they do provoke the driver into logging
this annoying message. Update the entry to remove the unneeded entries.
Reported-by: stealth <oleg.smirnov.1988@gmail.com>
Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/
Fixes: 6ca8af3c8f ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera")
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a52ddb98a6 ("memory: tegra186-emc: Simplify and handle deferred
probe with dev_err_probe()") accidently dropped a call to 'put_bpmp' to
release a handle to the BPMP when getting the EMC clock fails. Fix this
by restoring the 'goto put_bpmp' if devm_clk_get() fails.
Fixes: a52ddb98a6 ("memory: tegra186-emc: Simplify and handle deferred probe with dev_err_probe()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251106190550.1776974-1-jonathanh@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
parse_cbm() requires resource group mode and CLOSID to validate the capacity
bitmask (CBM). It is passed via struct rdtgroup in struct rdt_parse_data.
The io_alloc feature also uses CBMs to indicate which portions of cache are
allocated for I/O traffic. The CBMs are provided by user space and need to be
validated the same as CBMs provided for general (CPU) cache allocation.
parse_cbm() cannot be used as-is since io_alloc does not have rdtgroup context.
Pass the resource group mode and CLOSID directly to parse_cbm() via struct
rdt_parse_data, instead of through the rdtgroup struct, to facilitate calling
parse_cbm() to verify the CBM of the io_alloc feature.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/f8ec6ab5cf594d906a3fe75f56793d5fbd63f38f.1762995456.git.babu.moger@amd.com
If the linker emits warnings these should abort the build.
Otherwise they will be swallowed by run-tests.sh and not shown.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
LLVM 21 switched to -mcmodel=medium for LoongArch64 compilations.
This code model uses R_LARCH_ECALL36 relocations which might not be
supported by GNU ld which to nolibc testsuite uses by default.
ld will not resolve the relocation and all function calls will end up
as busy loops.
Use lld instead.
We can not switch to lld for all LLVM builds, as it does not support all
necessary architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Introduce the "io_alloc_cbm" resctrl file to display the capacity bitmasks
(CBMs) that represent the portions of each cache instance allocated
for I/O traffic on a cache resource that supports the "io_alloc" feature.
io_alloc_cbm resides in the info directory of a cache resource, for example,
/sys/fs/resctrl/info/L3/. Since the resource name is part of the path, it
is not necessary to display the resource name as done in the schemata file.
When CDP is enabled, io_alloc routes traffic using the highest CLOSID
associated with the CDP_CODE resource and that CLOSID becomes unusable for
the CDP_DATA resource. The highest CLOSID of CDP_CODE and CDP_DATA resources
will be kept in sync to ensure consistent user interface. In preparation for
this, access the CBMs for I/O traffic through highest CLOSID of either
CDP_CODE or CDP_DATA resource.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/55a3ff66a70e7ce8239f022e62b334e9d64af604.1762995456.git.babu.moger@amd.com
Failing to allocate the affinity mask of an interrupt descriptor fails the
whole descriptor initialization. It is then guaranteed that the cpumask is
always available whenever the related interrupt objects are alive, such as
the kthread handler.
Therefore remove the superfluous check since it is merely a historical
leftover. Get rid also of the comments above it that are obsolete and
useless.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251121143500.42111-4-frederic@kernel.org
When a cpuset isolated partition is created / updated or destroyed, the
interrupt threads are affined blindly to all the non-isolated CPUs. This
happens without taking into account the interrupt threads initial affinity
that becomes ignored.
For example in a system with 8 CPUs, if an interrupt and its kthread are
initially affine to CPU 5, creating an isolated partition with only CPU 2
inside will eventually end up affining the interrupt kthread to all CPUs
but CPU 2 (that is CPUs 0,1,3-7), losing the kthread preference for CPU 5.
Besides the blind re-affining, this doesn't take care of the actual low
level interrupt which isn't migrated. As of today the only way to isolate
non managed interrupts, along with their kthreads, is to overwrite their
affinity separately, for example through /proc/irq/
To avoid doing that manually, future development should focus on updating
the interrupt's affinity whenever cpuset isolated partitions are updated.
In the meantime, cpuset shouldn't fiddle with interrupt threads directly.
To prevent from that, set the PF_NO_SETAFFINITY flag to them.
This is done through kthread_bind_mask() by affining them initially to all
possible CPUs as at that point the interrupt is not started up which means
the affinity of the hard interrupt is not known. The thread will adjust
that once it reaches the handler, which is guaranteed to happen after the
initial affinity of the hard interrupt is established.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251121143500.42111-3-frederic@kernel.org
During initialization, the interrupt thread is created before the interrupt
is enabled. The interrupt enablement happens before the actual kthread wake
up point. Once the interrupt is enabled the hardware can raise an interrupt
and once setup_irq() drops the descriptor lock a interrupt wake-up can
happen.
Even when such an interrupt can be considered premature, this is not a
problem in general because at the point where the descriptor lock is
dropped and the wakeup can happen, the data which is used by the thread is
fully initialized.
Though from the perspective of least surprise, the initial wakeup really
should be performed by the setup code and not randomly by a premature
interrupt.
Prevent this by performing a wake-up only if the target is in state
TASK_INTERRUPTIBLE, which the thread uses in wait_for_interrupt().
If the thread is still in state TASK_UNINTERRUPTIBLE, the wake-up is not
lost because after the setup code completed the initial wake-up the thread
will observe the IRQTF_RUNTHREAD and proceed with the handling.
[ tglx: Simplified the changes and extended the changelog. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251121143500.42111-2-frederic@kernel.org
Puranjay Mohan says:
====================
bpf: Nested rcu critical sections
v1: https://lore.kernel.org/bpf/20250916113622.19540-1-puranjay@kernel.org/
Changes in v1->v2:
- Move the addition of new tests to a separate patch (Alexei)
- Avoid incrementing active_rcu_locks at two places (Eduard)
Support nested rcu critical sections by making the boolean flag
active_rcu_lock a counter and use it to manage rcu critical section
state. bpf_rcu_read_lock() increments this counter and
bpf_rcu_read_unlock() decrements it, MEM_RCU -> PTR_UNTRUSTED transition
happens when active_rcu_locks drops to 0.
====================
Link: https://patch.msgid.link/20251117200411.25563-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As verifier now supports nested rcu critical sections, add new test
cases to make sure unbalanced usage of rcu_read_lock()/unlock() is
rejected.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, nested rcu critical sections are rejected by the verifier and
rcu_lock state is managed by a boolean variable. Add support for nested
rcu critical sections by make active_rcu_locks a counter similar to
active_preempt_locks. bpf_rcu_read_lock() increments this counter and
bpf_rcu_read_unlock() decrements it, MEM_RCU -> PTR_UNTRUSTED transition
happens when active_rcu_locks drops to 0.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- hci_sock: Prevent race in socket write iter and sock bind
- hci_core: Fix triggering cmd_timer for HCI_OP_NOP
- hci_core: lookup hci_conn on RX path on protocol side
- SMP: Fix not generating mackey and ltk when repairing
- btusb: mediatek: Fix kernel crash when releasing mtk iso interface
- btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
-----BEGIN PGP SIGNATURE-----
iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmkgevwZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKbDwEACCWNAMYblzTH4WI/ebPIFL
JB0Ngltk7e30S51c6qcTobyTDss8Z+DypEO9Tpexdnz00QFMt+lGFtSEcLoP3Vu1
QO6zJ9gh8CFECQS+mbrPnWLe26bV2rAG8oygMH3uAJKmq03pHtSNITM/ME4pHe2u
sh8E4OoDdF+l1RyYPzIhTkFwPUF9NyvDuUgTnW+GzMNjJKf+eh75E8g34uQ+sm5z
VzEq5yNAoOKUnGkAvs2bufS8f40zoIyNikKCXMnBQiXs5rs+Ci0spIP3uE8pMDMo
W7E8tn4Leay6cixF38d7wrPYu+CAomdiqDfEulyQK+mEXxg3FVLXYqErRuo8GIO4
UyHbyeEZLO2EDsOR8S8oHB8ka7s2NJbJeWDR0qhXTFDHOQxvKW6k8cmdND7Z99nP
riNz+BWQvy5vICcEIHUyJ8rL6CbSqtmYrWGJeHYR0UNJ/JI18ZGi3dRbRMYLhqAk
Fdkjza2IF0p8jMgaaO5pTfLLsCnA7VR0DR7p99RV6/JBuu2dSjMT699/RQCB6+cA
b5vE7uHhs8nKmhcy83DCe/34Xkv0nF6QBkEg8BdfnNSL41SY7rNwevWG3ZqnZyI+
GSpTFi9G0M4L9Mu0NeqEOGPmux7agaugt/nXkLHj52WsezfQFW0caoBMxj5Bw9wq
4d5XO/ia3FoZKi1VNL2QTQ==
=3a3G
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sock: Prevent race in socket write iter and sock bind
- hci_core: Fix triggering cmd_timer for HCI_OP_NOP
- hci_core: lookup hci_conn on RX path on protocol side
- SMP: Fix not generating mackey and ltk when repairing
- btusb: mediatek: Fix kernel crash when releasing mtk iso interface
- btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
* tag 'for-net-2025-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: SMP: Fix not generating mackey and ltk when repairing
Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
Bluetooth: hci_core: lookup hci_conn on RX path on protocol side
Bluetooth: hci_sock: Prevent race in socket write iter and sock bind
Bluetooth: hci_core: Fix triggering cmd_timer for HCI_OP_NOP
Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface
====================
Link: https://patch.msgid.link/20251121145332.177015-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: qcon-ethqos: "rgmii" accessor cleanups
This series cleans up the "rgmii" accessors in qcom-ethqos.
readl() and writel() return and take a u32 for the value. Rather than
implicitly casting this to an int, keep it as a u32.
Add set/clear functions to reduce the code and make it easier to read.
Finally, convert the open-coded poll loops to use the iopoll helpers.
Note that patch 1 has a checkpatch warning concerning "volatile" -
I'm changing the type here, and the "volatile" is removed in patch 3.
I do not feel it is appropriate to remove it in patch 1.
====================
Link: https://patch.msgid.link/aR76i0HjXitfl7xk@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use read_poll_timeout_atomic() to poll the rgmii registers rather than
open-coding the polling.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vM2n1-0000000FRTu-0js9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver has a lot of bit manipulation of the RGMII registers. Add
a pair of helpers to set bits and clear bits, converting the various
calls to rgmii_updatel() as appropriate.
Most of the change was done via this sed script:
/rgmii_updatel/ {
N
/,$/N
/mask, / ! {
s|rgmii_updatel\(([^,]*,\s+([^,]*),\s+)\2,\s+|rgmii_setmask(\1|
s|rgmii_updatel\(([^,]*,\s+([^,]*),\s+)0,\s+|rgmii_clrmask(\1|
s|^\s+$||
}
}
and then formatting tweaked where necessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vM2mw-0000000FRTo-0End@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
readl() returns a u32, and writel() takes a "u32" for the value. These
are used in rgmii_readl()() and rgmii_writel(), but the value and
return are "int". As these are 32-bit register values which are not
signed, use "u32".
These changes do not cause generated code changes.
Update rgmii_updatel() to use u32 for mask and val. Changing "mask"
to "u32" also does not cause generated code changes. However, changing
"val" causes the generated assembly to be re-ordered for aarch64.
Update the temporary variables used with the rgmii functions to use
u32.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vM2mq-0000000FRTi-3y5F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the interface mode doesn't need to be updated on PHYs connected with
USXGMII and integrated PHYs, gpy_update_interface() should just return 0
in these cases rather than -EINVAL which has wrongly been introduced by
commit 7a495dde27 ("net: phy: mxl-gpy: Change gpy_update_interface()
function return type"), as this breaks support for those PHYs.
Fixes: 7a495dde27 ("net: phy: mxl-gpy: Change gpy_update_interface() function return type")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f744f721a1fcc5e2e936428c62ff2c7d94d2a293.1763648168.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function was used in t7xx_hif_cldma.c only. Make it static
as it should be.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@qualcomm.com>
Link: https://patch.msgid.link/20251120115208.345578-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 0f8d42bf12, with the
memcpy_sglist() part dropped.
Now that memcpy_sglist() no longer uses the skcipher_walk code, the
skcipher_walk code can be moved back to where it belongs.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on. The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.
Fix it by replacing it with a new implementation written from scratch.
It always succeeds. It's also a bit faster, since it avoids the
overhead of skcipher_walk. skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.
Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf12 ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As suggested by Herbert, I would like to request to be added as a
Maintainer for the iaa_crypto driver.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_shash support for poly1305 was removed, the tcrypt
support for it is now unused as well. Support for benchmarking the
kernel's Poly1305 code is now provided by the poly1305 kunit test.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uninitialized pointers with `__free` attribute can cause undefined
behavior as the memory assigned randomly to the pointer is freed
automatically when the pointer goes out of scope.
crypto/asymmetric_keys doesn't have any bugs related to this as of now,
but, it is better to initialize and assign pointers with `__free`
attribute in one statement to ensure proper scope-based cleanup
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aPiG_F5EBQUjZqsl@stanley.mountain/
Signed-off-by: Ally Heev <allyheev@gmail.com>
Reviewed-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warning:
crypto/asymmetric_keys/restrict.c:20:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER unsigned char data[10]; onto the FAM
struct asymmetric_key_id::data[], while keeping the FAM and the start
of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's
intentionally placed inmediately after the corresponding structures --no
blank line in between.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix error handling in cc_map_hash_request_update where sg_nents_for_len
return value was assigned to u32, converting negative errors to large
positive values before passing to sg_copy_to_buffer.
Check sg_nents_for_len return value and propagate errors before
assigning to areq_ctx->in_nents.
Fixes: b7ec853068 ("crypto: ccree - use std api when possible")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows.
Fixes: 7883d1b28a ("crypto: starfive - Add hash and HMAC support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A new test is added: caller_stack_write_tail_call tests that the live
stack is correctly tracked for a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Link: https://lore.kernel.org/r/20251119160355.1160932-5-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This updates bpf_insn_successors() reflecting that control flow might
jump over the instructions between tail call and function exit, verifier
might assume that some writes to parent stack always happen, which is
not the case.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Link: https://lore.kernel.org/r/20251119160355.1160932-4-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Three tests are added:
- invalidate_pkt_pointers_by_tail_call checks that one can use the
packet pointer after a tail call. This was originally possible
and also poses not problems, but was made impossible by 1a4607ffba.
- invalidate_pkt_pointers_by_static_tail_call tests a corner case
found by Eduard Zingerman during the discussion of the original fix,
which was broken in that fix.
- subprog_result_tail_call tests that precision propagation works
correctly across tail calls. This did not work before.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-3-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A successful ebpf tail call does not return to the caller, but to the
caller-of-the-caller, often just finishing the ebpf program altogether.
Any restrictions that the verifier needs to take into account - notably
the fact that the tail call might have modified packet pointers - are to
be checked on the caller-of-the-caller. Checking it on the caller made
the verifier refuse perfectly fine programs that would use the packet
pointers after a tail call, which is no problem as this code is only
executed if the tail call was unsuccessful, i.e. nothing happened.
This patch simulates the behavior of a tail call in the verifier. A
conditional jump to the code after the tail call is added for the case
of an unsucessful tail call, and a return to the caller is simulated for
a successful tail call.
For the successful case we assume that the tail call returns an int,
as tail calls are currently only allowed in functions that return and
int. We always assume that the tail call modified the packet pointers,
as we do not know what the tail call did.
For the unsuccessful case we know nothing happened, so we do not need to
add new constraints.
This approach also allows to check other problems that may occur with
tail calls, namely we are now able to check that precision is properly
propagated into subprograms using tail calls, as well as checking the
live slots in such a subprogram.
Fixes: 1a4607ffba ("bpf: consider that tail calls invalidate packet pointers")
Link: https://lore.kernel.org/bpf/20251029105828.1488347-1-martin.teichmann@xfel.eu/
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-2-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In [1] Dan Carpenter reported that the following code makes the
Smatch static analyser unhappy:
17904 value = map->ops->map_lookup_elem(map, &i);
17905 if (!value)
17906 return -EINVAL;
--> 17907 items[i - start] = value->xlated_off;
The analyser assumes that the `value` variable may contain an error
and thus it should be properly checked before the dereference.
On practice this will never happen as array maps do not return
error values in map_lookup_elem, but to make the Smatch and other
possible analysers happy this patch adds a formal check.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/aR2BN1Ix--8tmVrN@stanley.mountain/ [1]
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251119112517.1091793-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
commit 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
