ms->buf is allocated in mtk_snand_setup_pagefmt() but was not freed on
the following error paths.
Fixes: 2b1e19811a ("spi: mtk-snfi: Change default page format to setup default setting")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260416-mtk-snfi-v2-1-3f487689dacb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For suspend/resume to work correctly, do for colorop state the same we
do for plane/crtc/connector states: duplicate the state of colorops in a
color pipeline if it's in use by a given plane when suspending and
restore cached colorop states when resuming. While at it, prevent
unused-variable warning when using for_each_new_colorop_in_stage here.
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260318163629.300627-1-mwen@igalia.com
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Add an option called TIMERLAT_ALIGN to osnoise/options, together with a
corresponding setting osnoise/timerlat_align_us.
This option sets the alignment of wakeup times between different
timerlat threads, similarly to cyclictest's -A/--aligned option. If
TIMERLAT_ALIGN is set, the first thread that reaches the first cycle
records its first wake-up time. Each following thread sets its first
wake-up time to a fixed offset from the recorded time, and increments
it by the same offset.
Example:
osnoise/timerlat_period is set to 1000, osnoise/timerlat_align_us is
set to 20. There are four threads, on CPUs 1 to 4.
- CPU 4 enters first cycle first. The current time is 20000us, so
the wake-up of the first cycle is set to 21000us. This time is recorded.
- CPU 2 enter first cycle next. It reads the recorded time, increments
it to 21020us, and uses this value as its own wake-up time for the first
cycle.
- CPU 3 enters first cycle next. It reads the recorded time, increments
it to 21040 us, and uses the value as its own wake-up time.
- CPU 1 proceeds analogically.
In each next cycle, the wake-up time (called "absolute period" in
timerlat code) is incremented by the (relative) period of 1000us. Thus,
the wake-ups in the following cycles (provided the times are reached and
not in the past) will be as follows:
CPU 1 CPU 2 CPU 3 CPU 4
21080us 21020us 21040us 21000us
22080us 22020us 22040us 22000us
... ... ... ...
Even if any cycle is skipped due to e.g. the first cycle calculation
happening later, the alignment stays in place.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://patch.msgid.link/20260416115942.544032-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix an operator precedence issue in convert_bpf_ld_abs() where the
expression offset + ip_align % size evaluates as offset + (ip_align % size)
due to % having higher precedence than +. That latter evaluation does
not make any sense. The intended check is (offset + ip_align) % size == 0
to verify that the packet load offset is properly aligned for direct
access.
With NET_IP_ALIGN == 2, the bug causes the inline fast-path for direct
packet loads to almost never be taken on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
platforms. This forces nearly all cBPF BPF_LD_ABS packet loads through
the bpf_skb_load_helper slow path on the affected archs.
Fixes: e0cea7ce98 ("bpf: implement ld_abs/ld_ind in native bpf")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260416122719.661033-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Xu Kuohai says:
====================
emit ENDBR/BTI instructions for indirect
On architectures with CFI protection enabled that require landing pad
instructions at indirect jump targets, such as x86 with CET/IBT enabled
and arm64 with BTI enabled, kernel panics when an indirect jump lands on
a target without landing pad. Therefore, the JIT must emit landing pad
instructions for indirect jump targets.
The verifier already recognizes which instructions are indirect jump
targets during the verification phase. So we can store this information
in env->insn_aux_data and pass it to the JIT as new parameter, allowing
the JIT to consult env->insn_aux_data to determine which instructions are
indirect jump targets.
During JIT, constants blinding is performed. It rewrites the private copy
of instructions for the JITed program, but it does not adjust the global
env->insn_aux_data array. As a result, after constants blinding, the
instruction indexes used by JIT may no longer match the indexes in
env->insn_aux_data, so the JIT can not use env->insn_aux_data directly.
To avoid this mismatch, and given that all existing arch-specific JITs
already implement constants blinding with largely duplicated code, move
constants blinding from JIT to generic code.
v15:
- Rebase and target bpf tree
- Resotre subprog_start of the fake 'exit' subprog on failure
- Fix wrong function name used in comment
v14: https://lore.kernel.org/all/cover.1776062885.git.xukuohai@hotmail.com/
- Rebase
- Fix comment style
- Fix incorrect variable and function name used in commit message
v13: https://lore.kernel.org/bpf/20260411133847.1042658-1-xukuohai@huaweicloud.com
- Use vmalloc to allocate memory for insn_aux_data copies to match with vfree
- Do not free the copied memory of insn_aux_data when restoring from failure
- Code cleanup
v12: https://lore.kernel.org/bpf/20260403132811.753894-1-xukuohai@huaweicloud.com
- Restore env->insn_aux_data on JIT failure
- Fix incorrect error code sign (-EFAULT vs EFAULT)
- Fix incorrect prog used in the restore path
v11: https://lore.kernel.org/bpf/20260403090915.473493-1-xukuohai@huaweicloud.com
- Restore env->subprog_info after jit_subprogs() fails
- Clear prog->jit_requested and prog->blinding_requested on failure
- Use the actual env->insn_aux_data size in clear_insn_aux_data() on failure
v10: https://lore.kernel.org/bpf/20260324122052.342751-1-xukuohai@huaweicloud.com
- Fix the incorrect call_imm restore in jit_subprogs
- Define a dummy void version of bpf_jit_prog_release_other and
bpf_patch_insn_data when the corresponding config is not set
- Remove the unnecessary #ifdef in x86_64 JIT (Leon Hwang)
v9: https://lore.kernel.org/bpf/20260312170255.3427799-1-xukuohai@huaweicloud.com
- Make constant blinding available for classic bpf (Eduard)
- Clear prog->bpf_func, prog->jited ... on the error path of extra pass (Eduard)
- Fix spelling errors and remove unused parameter (Anton Protopopov)
v8: https://lore.kernel.org/bpf/20260309140044.2652538-1-xukuohai@huaweicloud.com
- Define void bpf_jit_blind_constants() function when CONFIG_BPF_JIT is not set
- Move indirect_target fixup for insn patching from bpf_jit_blind_constants()
to adjust_insn_aux_data()
v7: https://lore.kernel.org/bpf/20260307103949.2340104-1-xukuohai@huaweicloud.com
- Move constants blinding logic back to bpf/core.c
- Compute ip address before switch statement in x86 JIT
- Clear JIT state from error path on arm64 and loongarch
v6: https://lore.kernel.org/bpf/20260306102329.2056216-1-xukuohai@huaweicloud.com
- Move constants blinding from JIT to verifier
- Move call to bpf_prog_select_runtime from bpf_prog_load to verifier
v5: https://lore.kernel.org/bpf/20260302102726.1126019-1-xukuohai@huaweicloud.com
- Switch to pass env to JIT directly to get rid of copying private insn_aux_data for
each prog
v4: https://lore.kernel.org/all/20260114093914.2403982-1-xukuohai@huaweicloud.com
- Switch to the approach proposed by Eduard, using insn_aux_data to identify indirect
jump targets, and emit ENDBR on x86
v3: https://lore.kernel.org/bpf/20251227081033.240336-1-xukuohai@huaweicloud.com
- Get rid of unnecessary enum definition (Yonghong Song, Anton Protopopov)
v2: https://lore.kernel.org/bpf/20251223085447.139301-1-xukuohai@huaweicloud.com
- Exclude instruction arrays not used for indirect jumps (Anton Protopopov)
v1: https://lore.kernel.org/bpf/20251127140318.3944249-1-xukuohai@huaweicloud.com
====================
Link: https://patch.msgid.link/20260416064341.151802-1-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On CPUs that support BTI, the indirect jump selftest triggers a kernel
panic because there is no BTI instructions at the indirect jump targets.
Fix it by emitting a BTI instruction for each indirect jump target.
For reference, below is a sample panic log.
Internal error: Oops - BTI: 0000000036000003 [#1] SMP
...
Call trace:
bpf_prog_2e5f1c71c13ac3e0_big_jump_table+0x54/0xf8 (P)
bpf_prog_run_pin_on_cpu+0x140/0x468
bpf_prog_test_run_syscall+0x280/0x3b8
bpf_prog_test_run+0x22c/0x2c0
Fixes: f4a66cf1cb ("bpf: arm64: Add support for indirect jumps")
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-6-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On CPUs that support CET/IBT, the indirect jump selftest triggers
a kernel panic because the indirect jump targets lack ENDBR
instructions.
To fix it, emit an ENDBR instruction to each indirect jump target. Since
the ENDBR instruction shifts the position of original jited instructions,
fix the instruction address calculation wherever the addresses are used.
For reference, below is a sample panic log.
Missing ENDBR: bpf_prog_2e5f1c71c13ac3e0_big_jump_table+0x97/0xe1
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/cet.c:133!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
...
? 0xffffffffc00fb258
? bpf_prog_2e5f1c71c13ac3e0_big_jump_table+0x97/0xe1
bpf_prog_test_run_syscall+0x110/0x2f0
? fdget+0xba/0xe0
__sys_bpf+0xe4b/0x2590
? __kmalloc_node_track_caller_noprof+0x1c7/0x680
? bpf_prog_test_run_syscall+0x215/0x2f0
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x85/0x620
? bpf_prog_test_run_syscall+0x1e2/0x2f0
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-5-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce helper bpf_insn_is_indirect_target to check whether a BPF
instruction is an indirect jump target.
Since the verifier knows which instructions are indirect jump targets,
add a new flag indirect_target to struct bpf_insn_aux_data to mark
them. The verifier sets this flag when verifying an indirect jump target
instruction, and the helper checks the flag to determine whether an
instruction is an indirect jump target.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> #v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> #v12
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
LG SW49410 is the display panel used by sdm845-lg-judyln (LG G7 ThinQ).
It supports all the same properties as panel-simple.
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250915-judyln-panel-v2-3-01ab2199fea5@postmarketos.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260413131409.19022-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In es8311_set_bias_level(), the return value of
snd_soc_component_update_bits() was ignored. If this fails, not only
is the VMID selection not applied, but the previously enabled mclk
is left running, leading to an unbalanced clock reference count
(clock leak).
Check the return value and ensure clk_disable_unprepare() is called on
failure to maintain proper resource management.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260415030252.5547-3-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The es8311_resume() function currently ignores the return value of
regcache_sync(). If syncing the cache fails, the function still returns
0, leaving the codec in a potentially incorrect state.
Check the return value and propagate it to the ASoC core to ensure
resume failures are properly handled.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260415030252.5547-2-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AM62L DSS [1] support incorrectly used the same register and
clock constraints as AM65x, but AM62L has a single video port
Fix this by adding conditional constraints that properly define the
register regions and clocks for AM62L DSS (single video port) versus
other AM65x variants (dual video port).
[1]: Section 12.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4
Fixes: cb8d432330 ("dt-bindings: display: ti,am65x-dss: Add support for AM62L DSS")
Cc: stable@vger.kernel.org
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260415110409.2577633-1-s-jain1@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The Innolux G156HCE-L01 15.6" 1920x1080 24bpp dual-link LVDS TFT panel
is exactly that, dual-link LVDS panel. Move it into the correct schema,
which is panel-simple-lvds-dual-ports.yaml.
Fixes: 3c5e8aa44d ("dt-bindings: display: simple: Add Innolux G156HCE-L01 panel")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260404034321.341210-2-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
is a dual-link LVDS panel. Move it into the correct schema, which is
panel-simple-lvds-dual-ports.yaml.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260404034321.341210-1-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
A pattern property matching essentially anything doesn't work if there
are implicit properties such as 'phandle' which can occur on any node.
One such example popped up recently:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: thermal-zones: gpuss0-thermal:trips:phandle: 531 is not of type 'object'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml
Instead of a pattern property, use an "additionalProperties" schema
instead which is the fallback in case of no matching property.
Link: https://patch.msgid.link/20260410223601.1487473-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing.
Fixes: 26409dd045 ("of: unittest: Add pci_dt_testdrv pci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409034859.429071-1-vulab@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF.
Fixes: 1c668ea655 ("of: unittest: Use of_property_present()")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409022233.418103-1-vulab@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.
Two cases are covered:
1. Gateway nexthop replaced across families with an existing IPv6
route on the group (rejected by fib6_check_nh_list).
2. Blackhole nexthop replaced across families with no existing IPv6
route on the group (fib6_check_nh_list returns early) — this is
the path that triggers a NULL ptr deref without the kernel fix.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
Fixes: 7bf4796dd0 ("nexthops: add support for replace")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group.
CC: stable@vger.kernel.org
Fixes: abc77577a6 ("fsnotify: Provide framework for dropping SRCU lock in ->handle_event")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260410144950.156160-1-mszeredi@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
cake_update_flowkeys() is supposed to update the flow dissector keys
with the NAT-translated addresses and ports from conntrack, so that
CAKE's per-flow fairness correctly identifies post-NAT flows as
belonging to the same connection.
For the source port, this works correctly:
keys->ports.src = port;
But for the destination port, the assignment is reversed:
port = keys->ports.dst;
This means the NAT destination port is never updated in the flow keys.
As a result, when multiple connections are NATed to the same destination,
CAKE treats them as separate flows because the original (pre-NAT)
destination ports differ. This breaks CAKE's NAT-aware flow isolation
when using the "nat" mode.
The bug was introduced in commit b0c19ed608 ("sch_cake: Take advantage
of skb->hash where appropriate") which refactored the original direct
assignment into a compare-and-conditionally-update pattern, but wrote
the destination port update backwards.
Fix by reversing the assignment direction to match the source port
pattern.
Fixes: b0c19ed608 ("sch_cake: Take advantage of skb->hash where appropriate")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260413110041.44704-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Fixes: 960b589f86 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit
55cef78c24 ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation.
Fixes: 954d1fa1ac ("macvlan: Add netlink attribute for broadcast cutoff")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260413085349.73977-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Fixes: 2b789435d7 ("crypto: ccp - CCP AES crypto API support")
Signed-off-by: Paul Moses <p@1g4.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: d6112ea0cb ("crypto: ccp - introduce SEV_GET_ID2 command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: 76a2b524a4 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: e799035609 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MAY_BACKLOG requests can return EBUSY. Handle them by checking
for that value and filtering out EINPROGRESS notifications.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 5a1436beec ("crypto: pcrypt - call the complete function on error")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For authenc AEAD algorithms, sa2ul is trying to register very specific
-ce version as a fallback. This causes registration failure on SoCs
which do not have ARMv8-CE enabled/available. Change the fallback
algorithm from the specific driver name to generic algorithm name so
that the kernel can allocate any available fallback.
Fixes: d2c8ac187f ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: T Pratham <t-pratham@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The src SG list offset wasn't set properly when decrypting in-place,
fix it.
Reported-by: Wolfgang Walter <linux@stwm.de>
Fixes: e02494114e ("crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.
Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.
When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:
```
pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93]
lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93]
sp : ffffffc082feb820
x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980
x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0
x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000
x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009
x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0
Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740)
```
The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:
```
910142b6 ADD X22, X21, #0x50
f94012e0 LDR X0, [X23, #0x20]
f9002aa0 STR X0, [X21, #0x50]
f90006d3 STR X19, [X22, #0x8]
f9400740 LDR X0, [X26, #0x8]
```
The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.
Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.
Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
[Detailed investigation report of this bug]
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
Fixes: 42f39036cd ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260413084927.71353-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The hda-intel driver uses request_firmware_nowait() for loading its
patch, and tries to continue the probe directly from the fw loader
callback. This works in principle, but it has a few drawbacks:
- The driver may be released before the firmware callback completes
- Having two ways of async probe makes the code flow unnecessarily
complex
The former issue is more severe, as it may potentially lead to a UAF,
and there is no explicit way to cancel the pending firmware worker
for now.
This patch changes the firmware loading to be performed rather in the
common probe work without *_nowait(). Then the pending work can be
easily canceled, and the code becomes more straightforward.
A nice bonus is that, by moving into the probe work, the firmware
doesn't need any longer to be cached, hence we can get rid of struct
azx.fw field, and release the firmware immediately after parsing it,
too.
Fixes: 5cb543dba9 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
Link: https://patch.msgid.link/20260415135526.1813126-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Initialize err in ni_allocate_da_blocks_locked() and correct the
pre_alloc condition in attr_allocate_clusters().
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
check_file_record() validates rec->total against the record size but
never validates rec->used. The do_action() journal-replay handlers read
rec->used from disk and use it to compute memmove lengths:
DeleteAttribute: memmove(attr, ..., used - asize - roff)
CreateAttribute: memmove(..., attr, used - roff)
change_attr_size: memmove(..., used - PtrOffset(rec, next))
When rec->used is smaller than the offset of a validated attribute, or
larger than the record size, these subtractions can underflow allowing
us to copy huge amounts of memory in to a 4kb buffer, generally
considered a bad idea overall.
This requires a corrupted filesystem, which isn't a threat model the
kernel really needs to worry about, but checking for such an obvious
out-of-bounds value is good to keep things robust, especially on journal
replay
Fix this up by bounding rec->used correctly.
This is much like commit b2bc7c44ed ("fs/ntfs3: Fix slab-out-of-bounds
read in DeleteIndexEntryRoot") which checked different values in this
same switch statement.
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnJqkAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGYH/RMBphrIZUnC2zwq
mS+lwIve9Tb6LTwlCw+DbR0WROsiLUWCuL6AsMy6mEsWMVtj18uFmWv0vX0RP1o8
GuFNt2oTJ+3tqZgdlUi6//IZddXntiqwyvibocfrHIdLYfNdpTFCW5D7bnVEIkl3
9z7MH8IwZNajri38c+sqqpDhhsKfG6PgAzPea3kibw/XwcLquJv1h6KeCPoFAmKe
Tl8Pl96T9ESGUWa5Cu65CwQgaqITLH7BkyceVuUDXJGBJDN3wPhuD1ciPkjSCuJW
ou2WyCr30uEfsmFlYrmsHR/aF6SuGYgXFGzL+kmWhOk2nCjAwi8Xxue4tIAYKD/s
0GPb+hg=
=At5f
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc6' into perf-tools
To get the latest updates and fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The calculation of the number of pwm clk ticks from a time length in
nanoseconds involves a division and thus some rounding. That might
result in
duty_ticks + offset_ticks < period_ticks
despite
duty_length_ns + duty_offset_ns >= period_length_ns
. The stm32 PWM cannot configure offset_ticks freely, it can only select
0 or period_length_ns - duty_length_ns---that is the classic normal and
inverted polarity. The decision to select the hardware polarity must be
done using the ticks values and not the nanoseconds times to adhere to
the rounding rules by the pwm core.
With the pwm clk running at 208900 kHz on my test machine
(stm32mp135f-dk), a test case that was handled wrong is:
# pwmround -P 9999962 -O 24970 -D 9974992
period_length = 9999962
duty_length = 9974840
duty_offset = 25123
With this change applied the rounding is done correctly:
# pwmround -P 9999962 -O 24970 -D 9974992
period_length = 9999962
duty_length = 9974840
duty_offset = 0
Fixes: deaba9cff8 ("pwm: stm32: Implementation of the waveform callbacks")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/c5e7767cee821b5f6e00f95bd14a5e13015646fb.1776264104.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
We should not hold a mutex locked during wait_for_completion()
holding a reference is enough.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smbdirect_socket_destroy_sync() and sc->first_error was not set
we should set -ESHUTDOWN, that's a better condition
doing it only implicitly with the
sc->status < SMBDIRECT_SOCKET_DISCONNECTING check.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Everything in smbdirect.h was taken from my out of
tree prototype.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We still limit this to U8_MAX as the rdma api only uses __u8
and that's also the limit for Infiniband and RoCE*,
while iWarp would be able to support larger values at
the protocol level.
As struct smbdirect_socket_parameters will be part
of the uapi for IPPROTO_SMBDIRECT in future, change it
now even if userspace sockets won't be supported yet.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We always build as standalone module (or as part of the core kernel).
This also removes unused elements from struct smbdirect_socket
and unused exports.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
These will be used in future and callers should no
longer use smbdirect_socket_set_custom_workqueue().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
