Destage the VCHIQ interface driver to drivers/platform/raspberrypi.
There is still the remaining TODO item of improving the documentation,
which can be handled post destaging.
Secondly, multimedia drivers like codec and ISP that rely on this
interface need to be upstreamed. And lastly, the drivers that facilitate
the shared memory between VideoCore and Linux, like the vc-sm-cma driver
and vc_mem char driver also need to be upstreamed.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-6-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Raspberry Pi downstream drivers using VCHIQ have changed a lot since
kernel version 4.4 mentioned in the TODO, and are tangential to the
destaing process - so drop those items from the list.
Secondly, the code indentation for the vchiq interface driver is not so
bad anymore since Umang's series (linked below) got merged, so drop it
from the TODO.
Link: https://lore.kernel.org/all/20241013112128.397249-1-umang.jain@ideasonboard.com/
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-5-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the VCHIQ headers from drivers/staging/vc04_services/include to
include/linux/raspberrypi
This is done so that they can be shared between the VCHIQ interface
(which is going to be de-staged in a subsequent commit from staging) and
the VCHIQ drivers left in the staging/vc04_services (namely
bcm2835-audio, bcm2835-camera).
The include/linux/raspberrypi/ provides a central location to serve both of
these areas.
Co-developed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-4-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As bcm2835_camera driver is dropped, also drop the loading/unloading
support for it in vchiq.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-2-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835-camera driver is replaced by the V4L2 bcm2835-unicam driver
that is already upstream. So drop it from staging.
This also simplifies destaging of VCHIQ MMAL, by reducing the users of
the MMAL API (this driver is one of them).
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-1-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the chained assignment of red/green/blue with a temporary
variable and braces. This keeps behavior identical while improving
readability and satisfying checkpatch.
No functional change intended.
Signed-off-by: Cristian Del Gobbo <cristiandelgobbo87@gmail.com>
Link: https://patch.msgid.link/20251102230139.1720-2-cristiandelgobbo87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the continued arguments with the opening parenthesis to satisfy
CodingStyle and checkpatch.
No functional change intended.
Signed-off-by: Cristian Del Gobbo <cristiandelgobbo87@gmail.com>
Link: https://patch.msgid.link/20251102230139.1720-1-cristiandelgobbo87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both sides of this if else statement print exactly the same thing.
Delete the unnecessary if statement.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/aQIS6Q73Ss8xyJTD@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaces multiple memcpy() calls with ether_addr_copy() for copying
MAC/Ethernet addresses in rtl8723bs. This improves readability and
aligns with Linux kernel best practices for handling Ethernet addresses.
Fixes the following checkpatch.pl warning:
"Use ether_addr_copy() instead of memcpy() for Ethernet addresses."
These updates enhance code clarity and maintain consistency with
network driver conventions.
Signed-off-by: Dharanitharan R <dharanitharan725@gmail.com>
Link: https://patch.msgid.link/20251023145903.2557-1-dharanitharan725@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of EFUSE_xxx and MSR macros are already in place, so the note
and todo about that can be removed. Also, there was a duplication of the
definition of EFUSE_CTRL macro in two places, keep the one at the .h file.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Link: https://patch.msgid.link/20251022220324.14260-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MOST I2C driver has been completely broken for five years without
anyone noticing so remove the driver from staging.
Specifically, commit 723de0f917 ("staging: most: remove device from
interface structure") started requiring drivers to set the interface
device pointer before registration, but the I2C driver was never updated
which results in a NULL pointer dereference if anyone ever tries to
probe it.
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Cc: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251029093442.29256-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures.
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Fixes: 4b12709026 ("most: usb: Fix use-after-free in hdm_disconnect")
Fixes: a8cc9e5fcb ("most: usb: hdm_probe: Fix calling put_device() before device initialization")
Cc: stable@vger.kernel.org
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251029093029.28922-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function qcom_slim_ngd_notify_slaves() calls of_slim_get_device() which
internally uses device_find_child() to obtain a device reference.
According to the device_find_child() documentation,
the caller must drop the reference with put_device() after use.
Found via static analysis and this is similar to commit 4e65bda827
("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251027060601.33228-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ucsi_psy_get_current_max function defaults to 0.1A when it is not
clear how much current the partner device can support. But this does
not check the port is connected, and will report 0.1A max current when
nothing is connected. Update ucsi_psy_get_current_max to report 0A when
there is no connection.
Fixes: af833e7f7d ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default")
Cc: stable@vger.kernel.org
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Rule: add
Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com
Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI device IDs were organised based on the Intel
architecture generation in most cases, but not with every
ID. That left the device ID table with no real order.
Sorting the table based on the device ID.
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107121548.2702900-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the necessary PCI ID for Intel Nova Lake -S
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251106115926.2317877-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysdev_is_parent check was being used to infer PCI devices that have
the DMA mask set from the PCI capabilities, but sysdev_is_parent is also
used for non-PCI ACPI devices in which case the DMA mask would be the
bus default or as set by the _DMA method.
Without this fix the DMA mask would default to 32-bits and so allocation
would fail if there was no DRAM below 4GB.
Fixes: 47ce45906c ("usb: dwc3: leave default DMA for PCI devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107104437.1602509-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages.
Fixes: a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()")
Cc: stable <stable@kernel.org>
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uttkarsh Aggarwal observed a kernel panic during sideband un-register
and found it was caused by a race condition between sideband unregister,
and creating sideband interrupters.
The issue occurrs when thread T1 runs uaudio_disconnect() and released
sb->xhci via sideband_unregister, while thread T2 simultaneously accessed
the now-NULL sb->xhci in xhci_sideband_create_interrupter() resulting in
a crash.
Ensure new endpoints or interrupter can't be added to a sidenband after
xhci_sideband_unregister() cleared the existing ones, and unlocked the
sideband mutex.
Reorganize code so that mutex is only taken and released once in
xhci_sideband_unregister(), and clear sb->vdev while mutex is taken.
Use mutex guards to reduce human unlock errors in code
Refuse to add endpoints or interrupter if sb->vdev is not set.
sb->vdev is set when sideband is created and registered.
Reported-by: Uttkarsh Aggarwal <uttkarsh.aggarwal@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/20251028080043.27760-1-uttkarsh.aggarwal@oss.qualcomm.com
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data read from a DbC device may be corrupted due to a race between
ongoing write and write request completion handler both queuing new
transfer blocks (TRBs) if there are remining data in the kfifo.
TRBs may be in incorrct order compared to the data in the kfifo.
Driver fails to keep lock between reading data from kfifo into a
dbc request buffer, and queuing the request to the transfer ring.
This allows completed request to re-queue itself in the middle of
an ongoing transfer loop, forcing itself between a kfifo read and
request TRB write of another request
cpu0 cpu1 (re-queue completed req2)
lock(port_lock)
dbc_start_tx()
kfifo_out(fifo, req1->buffer)
unlock(port_lock)
lock(port_lock)
dbc_write_complete(req2)
dbc_start_tx()
kfifo_out(fifo, req2->buffer)
unlock(port_lock)
lock(port_lock)
req2->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
lock(port_lock)
req1->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
In the above scenario a kfifo containing "12345678" would read "1234" to
req1 and "5678" to req2, but req2 is queued before req1 leading to
data being transmitted as "56781234"
Solve this by adding a flag that prevents starting a new tx if we
are already mid dbc_start_tx() during the unlocked part.
The already running dbc_do_start_tx() will make sure the newly completed
request gets re-queued as it is added to the request write_pool while
holding the lock.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A usb device caught behind a link in ss.Inactive error state needs to
be reset to recover. A VDEV_PORT_ERROR flag is used to track this state,
preventing new transfers from being queued until error is cleared.
This flag may be left uncleared if link goes to error state between two
resets, and print the following message:
"xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive"
Fix setting and clearing the flag.
The flag is cleared after hub driver has successfully reset the device
when hcd->reset_device is called. xhci-hcd issues an internal "reset
device" command in this callback, and clear all flags once the command
completes successfully.
This command may complete with a context state error if slot was recently
reset and is already in the defauilt state. This is treated as a success
but flag was left uncleared.
The link state field is also unreliable if port is currently in reset,
so don't set the flag in active reset cases.
Also clear the flag immediately when link is no longer in ss.Inactive
state and port event handler detects a completed reset.
This issue was discovered while debugging kernel bugzilla issue 220491.
It is likely one small part of the problem, causing some of the failures,
but root cause remains unknown
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491
Fixes: b8c3b71808 ("usb: xhci: Don't try to recover an endpoint if port is in error state.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nouveau:
- revert DMA mask change
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmkPx08ACgkQDHTzWXnE
hr67yxAAgVE3TvqcFqxNYhWcOFKzsYXQ//DkClHnpQy0mGQW9OgOkykMYlCWJnNQ
xTq7MQLzby76EY39NckQSNtyeghle6SFNUt2tfe73T26VvN4naEyDM0m2IJaAVBs
mPBQAl2DGhyIhbIzNLm7smxJV4IWvyh3u3Un9cafu9D/jDmZIdiWkqPCm+wL13pQ
izt69BxCDbFzcKg+4XyuQsMKGzCz+KGh92krM3XyuM7imABtR/OhqVJctNmzWSOH
BIDJX7aQz1QBR358UqHaqGMmoJslRfp3qNVa8AIuOdPfQwsp+l4Y8lhE6R6J0kWZ
GnScEi0LZwrJiuLVyzb4OQ4BdF1ne4oYXAsoZipnHcjT2y7IuspAn1opSpNlgNQL
l7AFYzEwQvq6b8krmCmBgQJrfkZXF7U4jngjD9Rd1uHl+tBQqlC3X32IXuZXddnY
S7kglsFFbmbhoUxMgpzKnu07G1/7V+59SLgvUN5qlbAjulhXYcCrXC6FJe/YyKLs
Da93B7mfGv3OqHQdLTVde63ODqnUZbvXUwOBRu3xEuwO7hN07YIrdYMkGfnkQlyT
N3RiOKcn8Rkpj+CrQrkpw1iNvDpfGUKO5rL0OKC77yva5KDUxcQo6kpa1nDwW16Q
QJ5ZYXWQyeWvyPRf2xmG7Ln6tkP485mfHOYFUq74/l5ZRQJpVx8=
=gRi+
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fix from Dave Airlie:
"Brown paper bag, the dma mask fix which I applied and actually looked
through for bad things, actually broke newer GPUs, there might be some
latent part in the boot path that is assuming 32-bit still, but we
will figure that out elsewhere.
nouveau:
- revert DMA mask change"
* tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau: set DMA mask before creating the flush page"
Add I3C controller PCI IDs for Intel Nova Lake-S.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251107060750.7995-1-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When running compliance tests on the Altera Agilex5 SoCFPGA platform,
the I3C bus can hang when a slave issues an IBI after the DAA process
completes. The DesignWare I3C master enters runtime suspend once DAA
finishes and stops driving SCL, preventing the IBI transfer from
completing and leaving SDA stuck low.
Add a new compatible string, "altr,agilex5-dw-i3c-master" and apply a quirk
that keep runtime PM always active on this platform by calling
pm_runtime_get_noresume() during probe.
Prevent bus hangs triggered by IBIs on Agilex5 while maintaining keep the
same behavior on other platforms.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/482d540722a98c2809d8275445aaa544b565bf85.1762237922.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add the "altr,agilex5-dw-i3c-master" compatible string to the
Synopsys DesignWare I3C master binding. This allow Agilex5 to
use the generic DW I3C master controller while applying any
required platform-specific quirks.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/4ef059b129e9457eaadcfa6b996b9b6b000c7dba.1762237922.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Markus Probst <markus.probst@posteo.de> says:
This series adds support for power resources defined in acpi on ata
ports/devices. A device can define a power resource in an ata port/device,
which then gets powered on right before the port is probed. This can be
useful for devices, which have sata power connectors that are:
a: powered down by default
b: can be individually powered on
like in some synology nas devices. If thats the case it will be assumed,
that the power resource won't survive reboots and therefore the disk will
be stopped.
Link: https://patch.msgid.link/20251104142413.322347-1-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some embedded devices have the ability to control whether power is
provided to the disks via the SATA power connector or not. ACPI power
resources are usually off by default, thus making it unclear if the
specific power resource will retain its state after a restart. If power
resources are defined on ATA ports / devices in ACPI, we should stop the
disk on SYSTEM_RESTART, to ensure the disk will not lose power while
active.
Add a new function, ata_acpi_dev_manage_restart(), that will be used to
determine if a disk should be stopped before restarting the system. If a
usable ACPI power resource has been found, it is assumed that the disk
will lose power after a restart and should be stopped to avoid unclean
shutdown due to power loss.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Link: https://patch.msgid.link/20251104142413.322347-4-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some embedded devices have the ability to control whether power is
provided to the disks via the SATA power connector or not. If power
resources are defined on ATA ports / devices in ACPI, we should try to
set the power state to D0 before probing the disk to ensure that any
power supply or power gate that may exist is providing power to the
disk.
An example for such devices would be newer synology NAS devices. Every
disk slot has its own SATA power connector. Whether the connector is
providing power is controlled via an gpio, which is *off by default*.
Also the disk loses power on reboots.
Add a new function, ata_acpi_port_power_on(), that will be used to power
on the SATA power connector if usable ACPI power resources on the
associated ATA port / device are found. It will be called right before
probing the port, therefore the disk will be powered on just in time.
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20251104142413.322347-3-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In addition to the already existing manage_shutdown,
manage_system_start_stop and manage_runtime_start_stop device scsi_disk
attributes, add manage_restart, which allows the high-level device
driver (sd) to manage the device power state for SYSTEM_RESTART if set
to 1.
This attribute is necessary for the following commit "ata: stop disk on
restart if ACPI power resources are found" to avoid a potential disk
power failure in the case the SATA power connector does not retain the
power state after a restart.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Link: https://patch.msgid.link/20251104142413.322347-2-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justin.tee@broadcom.com> says:
Update lpfc to revision 14.4.0.12
This patch set contains updates to log messaging, revision of outdated
comment descriptions, fixes to kref accounting, support for BB credit
recovery in point-to-point mode, and introduction of registering unique
platform name identifiers with fabrics.
The patches were cut against Martin's 6.19/scsi-queue tree.
Link: https://patch.msgid.link/20251106224639.139176-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC-LS and FC-GS specifications outline fields for registering a platform
name identifier (PNI) to the fabric. The PNI assists fabrics with
identifying the physical server source of frames in the fabric.
lpfc generates a PNI based partially on the uuid specific for the
system. Initial attempts to extract a uuid are made from SMBIOS's
System Information 08h uuid entry. If SMBIOS DMI does not exist, a PNI
is not generated and PNI registration with the fabric is skipped.
The PNI is submitted in FLOGI and FDISC frames. After successful fabric
login, the RSPNI_PNI CT frame is submitted to the fabric to register the
OS host name tying it to the PNI.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, BB credit recovery is excluded to fabric topology mode. This
patch allows setting of BB_SC_N in PLOGIs and PLOGI_ACCs when in
point-to-point mode so that BB credit recovery can operate in
point-to-point topology as well.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's possible for an unstable link to repeatedly bounce allowing a FLOGI
retry, but then bounce again forcing an abort of the FLOGI. Ensure that
the initial reference count on the FLOGI ndlp is restored in this faulty
link scenario.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, there is a kref put in the lpfc_cleanup() routine that takes
care of outstanding references on fabric controller ndlps in UNUSED
state. While typically there is a state change from UNUSED -> REGLOGIN
when the ndlp successfully logs into the fabric, there may be cases when
FLOGI is unsuccessful and the ndlp will remain in UNUSED state without a
registered rpi, yet the ndlp incorrectly has a kref count of one.
To address this, handling of Fabric Controller ndlps are moved into the
routines: lpfc_issue_els_scr(), lpfc_issue_els_rdf(),
lpfc_cmpl_els_disc_cmd().
In both lpfc_issue_els_scr() and lpfc_issue_els_rdf(), if there does not
exist a previously created fabric controller ndlp, an ndlp will be
created. Otherwise, we can reuse the pre-existing ndlp object.
In lpfc_cmpl_els_disc_cmd(), if the SCR or RDF are not successfully
issued, the initial reference on the ndlp that is not registered with
upper layers will be decremented with a kref_put().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In point-to-point topology, the driver sometimes defers the unsolicited
FLOGI LS_ACC until it sends its FLOGI to the remote port. When this
happens, lpfc neglects to release the ndlp allocated for the unsolicited
FLOGI. This patch adds code to release the ndlp for the deferred
unsolicited FLOGI LS_ACC.
An NLP_FLOGI_DFR_ACC flag is introduced to facilitate identifying an
ndlp with an expected deferred FLOGI LS_ACC completion. When
lpfc_cmpl_els_rsp() detects the correct qualifiers, it releases the
initial reference on the ndlp object. And when lpfc_cmpl_els_rsp()
exits, the remaining put for the deferred action is executed and the
ndlp is released.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Unregistration of an rpi object should be done when a PLOGI is received
as PLOGI receipt implies an implicit LOGO. Previously, the driver would
continue using the same, already registered, rpi and ACC the received
PLOGI.
Replace the ACC and early return statement with break to execute the
rest of the lpfc_rcv_plogi logic outside the switch case statement.
This ensures unregistration and reregistration of an rpi after PLOGI_ACC
completion.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove redundant cmd_dmabuf and bpl_dmabuf NULL ptr assignment as they
are already initialized to NULL when handling a new unsolicited event.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correcting discovery related function headers, return status
information, and comment descriptions. There are no functional changes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update PRLI status log message to automatically warn when CQE status is
non-zero.
When issuing an RSCN, log ndlp's kref count to the debugfs trace buffer.
Add the NPIV virtual port index to the FDMI registration log message
with the fabric.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.19/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.19/scsi-queue
This patch series includes four patches, with two main functional changes:
1. smartpqi-Add-timeout-value-to-RAID-path-requests-to-physical-devices
Sets a timeout value for requests sent to physical devices via the
RAID path. This prevents the controller firmware from waiting
indefinitely and allows it to time out requests a few seconds before
the OS issues Target Management Function (TMF) commands.
The timeout value sent to the firmware is set to 3 seconds less than
the OS timeout, which significantly reduces TMF invocations.
2. smartpqi-fix-Device-resources-accessed-after-device-removal
Fixes a race condition during device removal by:
* Checking for device removal in the reset handler and canceling any
pending reset work if the device is no longer present.
* Canceling outstanding TMF work items in the .sdev_destroy handler.
Together, these changes eliminate races between reset operations
and device removal.
The other two patches:
3. smartpqi-add-new-Hurray-Data-pci-device
Adds support for new Hurray Data PCI device.
No functional changes.
4. smartpqi-update-driver-version-to-2.1.36-026
Updates the driver version string.
No functional changes.
Link: https://patch.msgid.link/20251106163823.786828-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver version to 2.1.36-026
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for new Hurray Data controller.
All entries are in HEX.
Add PCI IDs for Hurray Data controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 207d 4840
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct possible race conditions during device removal.
Previously, a scheduled work item to reset a LUN could still execute
after the device was removed, leading to use-after-free and other
resource access issues.
This race condition occurs because the abort handler may schedule a LUN
reset concurrently with device removal via sdev_destroy(), leading to
use-after-free and improper access to freed resources.
- Check in the device reset handler if the device is still present in
the controller's SCSI device list before running; if not, the reset
is skipped.
- Cancel any pending TMF work that has not started in sdev_destroy().
- Ensure device freeing in sdev_destroy() is done while holding the
LUN reset mutex to avoid races with ongoing resets.
Fixes: 2d80f4054f ("scsi: smartpqi: Update deleting a LUN via sysfs")
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
