When a command times out, mark it as ERT_CMD_STATE_TIMEOUT. Any other
commands that are canceled due to this timeout should be marked as
ERT_CMD_STATE_ABORT.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251029193423.2430463-1-lizhi.hou@amd.com
Add 'reg' and 'clocks' properties to enable QoS configuration. These
properties enable access to QoS registers and necessary clocks for
configuration.
QoS configuration is essential for ensuring that latency sensitive
components such as CPUs and multimedia engines receive prioritized
access to memory and interconnect resources. This helps to manage
bandwidth and latency across subsystems, improving system responsiveness
and performance in concurrent workloads.
Both 'reg' and 'clocks' properties are optional. If either is missing,
QoS configuration will be skipped. This behavior is controlled by the
'qos_requires_clocks' flag in the driver, which ensures that QoS
configuration is bypassed when required clocks are not defined.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001073344.6599-2-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-10-29 (ice, i40e, idpf, ixgbe, igbvf)
For ice:
Michal converts driver to utilize Page Pool and libeth APIs. Conversion
is based on similar changes done for iavf in order to simplify buffer
management, improve maintainability, and increase code reuse across
Intel Ethernet drivers.
Additional details:
https://lore.kernel.org/20250925092253.1306476-1-michal.kubiak@intel.com
Alexander adds support for header split, configurable via ethtool.
Grzegorz allows for use of 100Mbps on E825C SGMII devices.
For i40e:
Jay Vosburgh avoids sending link state changes to VF if it is already in
the requested state.
For idpf:
Sreedevi removes duplicated defines.
For ixgbe:
Alok Tiwari fixes some typos.
For igbvf:
Alok Tiwari fixes output of VLAN warning message.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: fix misplaced newline in VLAN add warning message
ixgbe: fix typos in ixgbe driver comments
idpf: remove duplicate defines in IDPF_CAP_RSS
i40e: avoid redundant VF link state updates
ice: Allow 100M speed for E825C SGMII device
ice: implement configurable header split for regular Rx
ice: switch to Page Pool
ice: drop page splitting and recycling
ice: remove legacy Rx and construct SKB
====================
Link: https://patch.msgid.link/20251029231218.1277233-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing interconnects to the USB2 host. The Fixes tag points to
the commit which broke probing of the USB host on that platform.
Fixes: 130733a100 ("interconnect: qcom: msm8996: Promote to core_initcall")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-2-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
>From the initial submission the interconnect driver missed the link from
SNOC_PNOC to the USB 2 configuration space. Add missing link in order to
let the platform configure and utilize this path.
Fixes: 7add937f52 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-1-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The mixed SQE support assumes that userspace always passes valid data,
that is not the case. Validate the opcode properly before indexing
the io_issue_defs[] array, and pass it through the nospec indexing
as well as it's a user valid indexing a kernel array.
Fixes: 1cba30bf9f ("io_uring: add support for IORING_SETUP_SQE_MIXED")
Reported-by: syzbot+b883b008a0b1067d5833@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Initialize the bmi_target_info structure using = {} at declaration time
instead of calling memset() in each bus-specific code path. This
simplifies the code and avoids an explicit memset.
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030130023.1836808-3-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Initialize the pm_qos_request structure using = {} instead of memset() in
ath10k_download_fw(). This ensures the structure is properly zeroed before
passing it to cpu_latency_qos_add_request(), and improves efficiency by
avoiding an explicit runtime memset.
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030130023.1836808-2-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
During scan and remain-on-channel requests, a scan link vif (arvif) is
assigned and a temporary vdev is created. If vdev creation fails, the
assigned arvif is left attached until the virtual interface is removed,
leaving a stale link in ahvif.
Fix this by freeing the stale arvif and resetting the corresponding link in
ahvif by calling ath12k_mac_unassign_link_vif() when vdev creation fails.
While at it, propagate the actual error code from ath12k_mac_vdev_create()
instead of returning -EINVAL in ath12k_mac_initiate_hw_scan().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 477cabfdb7 ("wifi: ath12k: modify link arvif creation and removal for MLO")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251026182254.1399650-3-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, vdev limit check is performed only in
ath12k_mac_assign_vif_to_vdev(). If the host has already created
maximum number of vdevs for the radio (ar) and a scan request
arrives for the same radio, ath12k_mac_initiate_hw_scan() attempts
to create a vdev without checking the limit, causing firmware asserts.
Centralize the vdev limit guard by moving the check into
ath12k_mac_vdev_create() so that all callers obey the limit.
While doing this, update the condition from
`num_created_vdevs > (TARGET_NUM_VDEVS(ab) - 1)` to
`num_created_vdevs >= TARGET_NUM_VDEVS(ab)` for clarity and to
eliminate unnecessary arithmetic.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 0d6e6736ed ("wifi: ath12k: scan statemachine changes for single wiphy")
Fixes: 4938ba733e ("wifi: ath12k: modify remain on channel for single wiphy")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251026182254.1399650-2-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixed rate is set for STAs that are associated. This will be done
during association or with ath12k_sta_rc_update_wk().
Add EHT fixed rate setting for STAs by adding call to
ath12k_mac_set_peer_eht_fixed_rate() during the times fixed rate is
set for STAs. This new function sets EHT fixed rate for a peer, which
sends WMI command with the updated MCS/NSS rate using
WMI_PEER_PARAM_FIXED_RATE command id.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024001928.257356-7-muna.sinada@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add EHT MCS/NSS rate functionality to peer association. As part of
ath12k_peer_assoc_h_eht() add the calculation of EHT MCS/NSS using
intersection of link_sta and phy capability.
ath12k_mac_max_eht_mcs_nss() function is utilized when comparing the
max NSS of link STA and phy capability since in split phy case, phy
supports max NSS of 2 for 5G band.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Co-developed-by: Vishal Kumar <quic_visk@quicinc.com>
Signed-off-by: Vishal Kumar <quic_visk@quicinc.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024001928.257356-4-muna.sinada@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add EHT rate handling to the existing rate functions that validate,
prepare and set rates.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024001928.257356-3-muna.sinada@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, functions in mac.c for setting GI and LTF rates are
specifically for HE rates.
Remove any mention of "HE" in such functions in order to allow for
other modes to utilize the functions. The intention is to prepare for
the addition of EHT GI and LTF fixed rate settings.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024001928.257356-2-muna.sinada@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In ath12k_core_init() when ath12k_core_hw_group_create() fails,
ath12k_core_hw_group_destroy() is called where for each device below
path would get executed
ath12k_core_soc_destroy()
ath12k_qmi_deinit_service()
qmi_handle_release()
This results in kernel crash in case one of the device fails at
qmi_handle_init() when creating hardware group:
ath12k_pci 0000:10:00.0: failed to initialize qmi handle
ath12k_pci 0000:10:00.0: failed to initialize qmi :-517
ath12k_pci 0000:10:00.0: failed to create soc core: -517
ath12k_pci 0000:10:00.0: unable to create hw group
BUG: unable to handle page fault for address: ffffffffffffffb7
RIP: 0010:qmi_handle_release
Call Trace:
<TASK>
ath12k_qmi_deinit_service
ath12k_core_hw_group_destroy
ath12k_core_init
ath12k_pci_probe
The detailed reason is, when qmi_handle_init() fails for a device
ab->qmi.handle is not correctly initialized. Then
ath12k_core_hw_group_create() returns failure, since error handing
is done for all device, eventually qmi_handle_release() is called for the
issue device and finally kernel crashes due to the uninitialized
ab->qmi.handle.
Fix this by moving error handling to ath12k_core_hw_group_create(), this
way the issue device can be skipped.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 6f245ea0ec ("wifi: ath12k: introduce device group abstraction")
Link: https://lore.kernel.org/ath12k/fabc97122016d1a66a53ddedd965d134@posteo.net
Reported-by: a-development <a-development@posteo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220518
Tested-by: a-development <a-development@posteo.de>
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030-fix-hw-group-create-err-handling-v1-1-0659e4d15fb9@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
During firmware recovery or suspend/resume, m3 memory could be reused if
the size of the new m3 binary is equal to or less than that of the
existing memory. There will be issues for the latter case, since
m3_mem->size will be updated with a smaller value and this value is
eventually used in the free path, where the original total size should be
used instead.
To fix it, add a new member in m3_mem_region structure to track the original
memory size and use it in free path.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 05090ae82f ("wifi: ath12k: check M3 buffer size as well whey trying to reuse it")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029-ath12k-fix-m3-reuse-v1-1-69225bacfc5d@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When the call to ath12k_wmi_arp_ns_offload() fails, the temporary memory
allocation for offload is not freed before returning. Fix that by
freeing offload in the error path.
Fixes: 1666108c74 ("wifi: ath12k: support ARP and NS offload")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028170457.134608-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add VGIC maintenance interrupt and interrupt-parent property for
interrupt controller, required to run Linux in virtualized environment.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
nand-controller@ffb90000 (altr,socfpga-denali-nand): Unevaluated
properties are not allowed ('flash@0' was unexpected)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Unevaluated properties are not allowed ('phy-addr' was unexpected)
socfpga_stratix10_swvp.dtb: sysmgr@ffd12000 (altr,sys-mgr-s10):
'interrupts' does not match any of the regexes:
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The python version of the kernel-doc parser emits some strange warnings
with just a line number in certain cases:
$ ./scripts/kernel-doc -Wall -none 'include/linux/virtio_config.h'
Warning: 174
Warning: 184
Warning: 190
Warning: include/linux/virtio_config.h:226 No description found for return value of '__virtio_test_bit'
Warning: include/linux/virtio_config.h:259 No description found for return value of 'virtio_has_feature'
Warning: include/linux/virtio_config.h:283 No description found for return value of 'virtio_has_dma_quirk'
Warning: include/linux/virtio_config.h:392 No description found for return value of 'virtqueue_set_affinity'
I eventually tracked this down to the lone call of emit_msg() in the
KernelEntry class, which looks like:
self.emit_msg(self.new_start_line, f"duplicate section name '{name}'\n")
This looks like all the other emit_msg calls. Unfortunately, the definition
within the KernelEntry class takes only a message parameter and not a line
number. The intended message is passed as the warning!
Pass the filename to the KernelEntry class, and use this to build the log
message in the same way as the KernelDoc class does.
To avoid future errors, mark the warning parameter for both emit_msg
definitions as a keyword-only argument. This will prevent accidentally
passing a string as the warning parameter in the future.
Also fix the call in dump_section to avoid an unnecessary additional
newline.
Fixes: e3b42e94cf ("scripts/lib/kdoc/kdoc_parser.py: move kernel entry to a class")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251030-jk-fix-kernel-doc-duplicate-return-warning-v2-1-ec4b5c662881@intel.com>
Rename drm_client_framebuffer_flush() to drm_cient_buffer_flush() and
adapt its callers. The old name was left over from previous naming
conventions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-8-tzimmermann@suse.de
Rename drm_client_framebuffer_create() to drm_client_buffer_create_dump()
and adapt callers. The new name reflects the function's purpose. Using
dumb buffers is the easiest way for creating a GEM buffer in a drivers-
independent way.
There's also drm_client_buffer_create(), which creates the client buffer
from a preexisting buffer object. This helper can be exported for drivers
that create their own GEM buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-7-tzimmermann@suse.de
Release client buffers with drm_client_buffer_delete() instead of
drm_client_framebuffer_delete(). The latter is just a tiny wrapper
around the former.
Move the test for !buffer into drm_client_buffer_delete(), although
all callers appear to always have a valid pointer.
v2:
- test for !buffer before deref-ing pointer (Jocelyn, Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-6-tzimmermann@suse.de
The client buffer's framebuffer holds a reference and pointer on
each of its GEM buffer objects. Thus the field gem in the client-
buffer struct is not necessary. Deprecated the field and convert
the client-buffer helpers to use the framebuffer's objects.
In drm_client_buffer_delete(), do a possible vunmap before releasing
the framebuffer. Otherwise we'd eventually release the framebuffer
before unmaping its buffer objects.
v2:
- avoid dependency on CONFIG_DRM_KMS_HELPER
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-5-tzimmermann@suse.de
Creating and deleting a client buffer always creates and deletes
the underlying DRM framebuffer. Inline the helper functions into
their callers.
With the _addfb code being inlined into drm_client_buffer_create(),
clean up the function's error rollback to release the framebuffer's
handle and GEM buffer object as needed.
Move the _rmfb code into drm_client_buffer_delete() rather than its
current location in drm_client_framebuffer_delete(). The former is
now the inverse of drm_client_buffer_create(). Makes no difference
for cleaning up. Also prepares for the removal of
drm_client_framebuffer_delete().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-4-tzimmermann@suse.de
Dumb-buffer creation within the client code is asymetrically balanced
across drm_client_buffer_create() and drm_client_framebuffer_create().
Put all dumb-buffer code into drm_client_framebuffer_create() and leave
client-buffer initialization to drm_client_buffer_create(). Clarifies
responsibility between these functions.
Apart form the architectural improvements, drm_client_buffer_create()
can now be exported if needed by clients. The client will be able to
initialize buffers that have been created from other interfaces than
dumb buffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-3-tzimmermann@suse.de
Only the client-buffer setup uses the pitch field from struct
drm_client_buffer. Remove the field and pass the value among setup
helpers.
Clients that need the pitch should rather look at the framebuffer's
pitches[0] directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-2-tzimmermann@suse.de
Preserve the I/O register bits in __ast_write8_i_masked() as specified
by preserve_mask. Accidentally OR-ing the output value into these will
overwrite the register's previous settings.
Fixes display output on the AST2300, where the screen can go blank at
boot. The driver's original commit 312fec1405 ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)") already added
the broken code. Commit 6f719373b9 ("drm/ast: Blank with VGACR17 sync
enable, always clear VGACRB6 sync off") triggered the bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Closes: https://lore.kernel.org/dri-devel/a40caf8e-58ad-4f9c-af7f-54f6f69c29bb@googlemail.com/
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 6f719373b9 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off")
Fixes: 312fec1405 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Nick Bowler <nbowler@draconx.ca>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patch.msgid.link/20251024073626.129032-1-tzimmermann@suse.de
Merge ACPI button, ACPI backlight (video), and ACPI fan driver fixes for
6.18-rc4:
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in the
ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling
a delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan driver
to allow device-managed resources to be cleaned up properly (Armin
Wolf)
* acpi-button:
ACPI: button: Call input_free_device() on failing input device registration
* acpi-video:
ACPI: video: Fix use-after-free in acpi_video_switch_brightness()
* acpi-fan:
ACPI: fan: Use platform device for devres-related actions
ACPI: fan: Use ACPI handle when retrieving _FST
This devkit is very similar to P3450, except it has less RAM, no display
port, and only 3 USB host ports. Derive from P3450 and disable the
hardware that is unavailable.
GPIO PA6 is used to control the HDMI power rail and needs to be on for
hotplug detect to work. This is mapped to the 3.3V USB hub on P3450.
That USB rail is not used here, so delete the regulator to avoid
conflicts.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Add the audio devices for the Tegra264 SoC in the tegra264.dtsi file,
which includes sound, HDA and APE(Audio Processing Engine) subsystem
nodes.
APE subsystem includes,
- I/O interfaces such as I2S, DMIC and DSPK (all the available
instances).
- HW accelerators such as ASRC, OPE, MVC, SFC, AMX, ADX and Mixer (all
the available instances).
- ADMA controller and Interrupt controllers.
- Enable the audio nodes in tegra264-p3971.dtsi platform DT file.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the device tree nodes for the MAIN and AON pin controllers found on
the Tegra186 family of SoCs.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Merge a cpuidle fix and two fixes related to system sleep for 6.18-rc4:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one to
address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to play
nasty games with these calls during hibernation (Rafael Wysocki)
* pm-cpuidle:
cpuidle: governors: menu: Select polling state in some more cases
* pm-sleep:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
Prevent intel_pstate from loading when Out-of-Band (OOB) P-states mode
is enabled.
The OOB identification mechanism for Diamond Rapids servers is the same
as for prior generation CPUs such as Granite Rapids. Add the Diamond
Rapids CPU model to intel_pstate_cpu_oob_ids[] to ensure correct OOB
handling.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20251022215425.3566218-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cgroup1 freezer piggybacks on the PM freezer, which inadvertently allowed
userspace to produce uninterruptible tasks at will. To avoid the issue,
cgroup2 freezer switched to a separate job control based mechanism. While
this happened a long time ago, the code and comment haven't been updated
making it confusing to people who aren't familiar with the history.
Rename cgroup_freezing() to cgroup1_freezing() and update comments on top of
freezing() and frozen() to clarify that cgroup2 freezer isn't covered by the
PM freezer mechanism.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Qu Wenruo <wqu@suse.com>
Link: https://patch.msgid.link/aPZ3q6Hm865NicBC@slm.duckdns.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a sysfs attribute `/sys/power/hibernate_compression_threads` to
allow runtime configuration of the number of threads used for
compressing and decompressing hibernation images.
The new sysfs interface enables dynamic adjustment at runtime:
# cat /sys/power/hibernate_compression_threads
3
# echo 4 > /sys/power/hibernate_compression_threads
This change provides greater flexibility for debugging and performance
tuning of hibernation without requiring a reboot.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/c68c62f97fabf32507b8794ad8c16cd22ee656ac.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The number of compression/decompression threads has a direct impact on
hibernate image generation and resume latency. Using more threads can
reduce overall resume time, but on systems with fewer CPU cores it may
also introduce contention and reduce efficiency.
Performance was evaluated on an 8-core ARM system, averaged over 10 runs:
Threads Hibernate(s) Resume(s)
--------------------------------
3 12.14 18.86
4 12.28 17.48
5 11.09 16.77
6 11.08 16.44
With 5–6 threads, resume latency improves by approximately 12% compared
to the default 3-thread configuration, with negligible impact on
hibernate time.
Introduce a new kernel parameter `hibernate_compression_threads=` that
allows users and integrators to tune the number of
compression/decompression threads at boot. This provides a way to
balance performance and CPU utilization across a wide range of hardware
without recompiling the kernel.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/f24b3ca6416e230a515a154ed4c121d72a7e05a6.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert crc->unc_len and crc->unc from fixed-size arrays to dynamically
allocated arrays, sized according to the actual number of threads selected
at runtime. This removes the fixed limit imposed by CMP_THREADS.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/b5db63bb95729482d2649b12d3a11cb7547b7fcc.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SC7280, QCM6490 and QCS6490 are three names for the same die,
collectively known as 'kodiak'. Follow the example of other platforms
and rename SC7280 to kodiak.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-rename-dts-2-v1-2-80c0b81c4d77@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
