When the vendor configuration space is 256MB aligned, the DesignWare PCIe
host driver enables ECAM access and sets the DBI base to the start of the
config space. This causes vendor drivers to incorrectly program iATU
regions, as they rely on the DBI address for internal accesses.
To fix this, avoid overwriting the DBI base when ECAM is enabled. Instead,
introduce a custom pci_ops that accesses the DBI region directly for the
root bus and uses ECAM for other buses.
Fixes: f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/eac81c57-1164-4d74-a1b4-6f353c577731@w6rz.net/
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://patch.msgid.link/20251017-ecam_fix-v1-1-f6faa3d0edf3@oss.qualcomm.com
sock_{send,recv}msg() internally calls security_socket_{send,recv}msg(),
which does security checks (e.g. SELinux) for socket access against the
current task. However, _sock_xmit() in drivers/block/nbd.c may be called
indirectly from a userspace syscall, where the NBD socket access would
be incorrectly checked against the calling userspace task (which simply
tries to read/write a file that happens to reside on an NBD device).
To fix this, temporarily override creds to kernel ones before calling
the sock_*() functions. This allows the security modules to recognize
this as internal access by the kernel, which will normally be allowed.
A way to trigger the issue is to do the following (on a system with
SELinux set to enforcing):
### Create nbd device:
truncate -s 256M /tmp/testfile
nbd-server localhost:10809 /tmp/testfile
### Connect to the nbd server:
nbd-client localhost
### Create mdraid array
mdadm --create -l 1 -n 2 /dev/md/testarray /dev/nbd0 missing
After these steps, assuming the SELinux policy doesn't allow the
unexpected access pattern, errors will be visible on the kernel console:
[ 142.204243] nbd0: detected capacity change from 0 to 524288
[ 165.189967] md: async del_gendisk mode will be removed in future, please upgrade to mdadm-4.5+
[ 165.252299] md/raid1:md127: active with 1 out of 2 mirrors
[ 165.252725] md127: detected capacity change from 0 to 522240
[ 165.255434] block nbd0: Send control failed (result -13)
[ 165.255718] block nbd0: Request send failed, requeueing
[ 165.256006] block nbd0: Dead connection, failed to find a fallback
[ 165.256041] block nbd0: Receive control failed (result -32)
[ 165.256423] block nbd0: shutting down sockets
[ 165.257196] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.257736] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.258263] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.259376] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.259920] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.260628] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.261661] ldm_validate_partition_table(): Disk read failed.
[ 165.262108] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.262769] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.263697] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.264412] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.265412] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.265872] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.266378] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.267168] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.267564] md127: unable to read partition table
[ 165.269581] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.269960] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.270316] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.270913] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.271253] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.271809] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.272074] ldm_validate_partition_table(): Disk read failed.
[ 165.272360] nbd0: unable to read partition table
[ 165.289004] ldm_validate_partition_table(): Disk read failed.
[ 165.289614] nbd0: unable to read partition table
The corresponding SELinux denial on Fedora/RHEL will look like this
(assuming it's not silenced):
type=AVC msg=audit(1758104872.510:116): avc: denied { write } for pid=1908 comm="mdadm" laddr=::1 lport=32772 faddr=::1 fport=10809 scontext=system_u:system_r:mdadm_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=tcp_socket permissive=0
The respective backtrace looks like this:
@security[mdadm, -13,
handshake_exit+221615650
handshake_exit+221615650
handshake_exit+221616465
security_socket_sendmsg+5
sock_sendmsg+106
handshake_exit+221616150
sock_sendmsg+5
__sock_xmit+162
nbd_send_cmd+597
nbd_handle_cmd+377
nbd_queue_rq+63
blk_mq_dispatch_rq_list+653
__blk_mq_do_dispatch_sched+184
__blk_mq_sched_dispatch_requests+333
blk_mq_sched_dispatch_requests+38
blk_mq_run_hw_queue+239
blk_mq_dispatch_plug_list+382
blk_mq_flush_plug_list.part.0+55
__blk_flush_plug+241
__submit_bio+353
submit_bio_noacct_nocheck+364
submit_bio_wait+84
__blkdev_direct_IO_simple+232
blkdev_read_iter+162
vfs_read+591
ksys_read+95
do_syscall_64+92
entry_SYSCALL_64_after_hwframe+120
]: 1
The issue has started to appear since commit 060406c61c ("block: add
plug while submitting IO").
Cc: Ming Lei <ming.lei@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2348878
Fixes: 060406c61c ("block: add plug while submitting IO")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The negation operator is incorrectly placed outside the unlikely()
macro:
if (!unlikely(iwa))
This inverts the compiler branch prediction hint, marking the NULL case
as likely instead of unlikely. The intent is to indicate that allocation
failures are rare, consistent with common kernel patterns.
Moving the negation inside unlikely():
if (unlikely(!iwa))
Fixes: 2b4fc4cd43 ("io_uring/waitid: setup async data in the prep handler")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Agilex5 includes an ARM SMMU v3 (System Memory Management Unit) to provide
address translation and memory protection for DMA-capable devices such as
PCIe, USB, and other peripherals.
This commit adds the SMMU node to the Agilex5 device tree with compatible
string "arm,smmu-v3", along with its register space and interrupts.
The SMMU is required to:
- Enable DMA address translation for devices that cannot directly access
the full physical memory space.
- Provide isolation and memory protection by restricting device access
to specific regions of memory, improving system security.
- Support virtualization use cases by enabling safe and isolated device
passthrough to guest VMs.
- Align with ARM platform architecture requirements for IOMMU support.
By describing the SMMU in the device tree, the Linux IOMMU framework
can probe and initialize it during boot. Devices in the system can then
bind to the SMMU via the `iommus` property, enabling memory translation
and protection features as expected.
The following devices are updated to reference the SMMU:
- NAND controller
- DMA controller
- SPI controller
This change is a necessary step toward full enablement high-speed
peripherals on Agilex5.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex5 integrates an ARM SMMU v3 (System Memory Management Unit) with
dedicated Translation Buffer Units (TBUs) assigned to various peripherals,
including the Synopsys DesignWare AXI DMA controller.
Each TBU handles address translation for its associated device by mapping
stream IDs to memory access permissions and virtual-to-physical address
mappings via the SMMU core.
The DesignWare AXI DMAC instances on Agilex5 are connected to their
respective TBUs. These TBUs forward DMA transactions from the controller
through the SMMU, enabling IOMMU-based features such as:
- Address translation for DMA operations
- Isolation and protection of memory regions accessed by the DMA controller
- Support for secure and virtualized environments through enforced access
control
To support this configuration, the `iommus` property must be added to the
binding schema for `snps,dw-axi-dmac`. This allows the device tree to
associate each DMA controller with the correct SMMU stream ID, enabling
the Linux IOMMU framework to configure translation contexts at runtime.
This change documents the IOMMU support for the DMA controller on Agilex5
and allows proper integration with the SMMUv3 hardware.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Since the commit c1f3f9797c ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
[1] 13ce5d4632
Cc: stable@vger.kernel.org
Cc: Andrei Lalaev <andrey.lalaev@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20251020-certain-arrogant-vole-of-sunshine-141841-mkl@pengutronix.de
Fixes: c1f3f9797c ("can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode")
Link: https://patch.msgid.link/20251020-netlink-fix-restart-v1-1-3f53c7f8520b@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Agilex5 integrates an ARM SMMU (System Memory Management Unit) with
Translation Buffer Units (TBUs) assigned to various peripherals,
including the NAND controller.
The Cadence HP NAND controller ("cdns,hp-nfc") on Agilex5 is behind a
TBU connected to the system's SMMUv3. To support this, the controller
requires an `iommus` property in the device tree to properly configure
address translation through the IOMMU framework.
Adding the `iommus` property to the binding schema allows the OS
to associate the NAND controller with its corresponding SMMU stream ID.
This enables:
- DMA address translation between the controller and system memory
- Memory protection for NAND operations
- Proper functioning of the IOMMU framework in secure or virtualized
environments
This change documents the IOMMU integration for the NAND controller
on platforms like Agilex5 where such hardware is present.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Marc Kleine-Budde <mkl@pengutronix.de> says:
I notived that 3 drivers (bxcan, esd and rockchip) use the function
can_dropped_invalid_skb(), that doesn't check if the device is in listen
only mode. This series converts these driver to use the new
can_dev_dropped_skb() function.
Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-0-556665793fa4@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After a reply on the mailing lists [1] it emerged that the DT
property "firmware-name" should not be relied on because of
possible issues with firmware versions.
For MediaTek SCP, there has never been any firmware version vs
driver version desync issue but, regardless, the firmwares are
always using the same name and they're always located in a path
with a specific pattern.
Instead of unconditionally always relying on the firmware-name
devicetree property to get a path to the SCP FW file, drivers
should construct a name based on what firmware it knows and
what hardware it is running on.
In order to do that, add a `scp_get_default_fw_path()` function
that constructs the path and filename based on two of the infos
that the driver can get:
1. The compatible string with the highest priority (so, the
first one at index 0); and
2. The type of SCP HW - single-core or multi-core.
This means that the default firmware path is generated as:
- Single core SCP: mediatek/(soc_model)/scp.img
for example: mediatek/mt8183/scp.img;
- Multi core SCP: mediatek/(soc_model)/scp_c(core_number).img
for example: mediatek/mt8188/scp_c0.img for Core 0, and
mediatek/mt8188/scp_c1.img for Core 1.
Note that the generated firmware path is being used only if the
"firmware-name" devicetree property is not present in the SCP
node or in the SCP Core node(s).
[1 - Reply regarding firmware-name property]
Link: https://lore.kernel.org/all/7e8718b0-df78-44a6-a102-89529d6abcce@app.fastmail.com/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251015084103.10737-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add Intel Arrow Lake-H PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20251020145415.3377022-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the recent hardware the flash component density can be increased to
128M. Update the driver to support this. While there log a warning if we
encounter an unsupported value in this field.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20251020145415.3377022-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recast Steven Price as Panfrost driver maintainer.
Also add Adrian Larumbe in the same role.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-13-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
panfrost_job_* prefixed functions in panfrost_job.c deal with both
panfrost_job objects and also the more general JM (Job Manager) side of
the device itself. This is confusing.
Reprefix functions that program the JM to panfrosot_jm_* instead.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-12-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
The as_in_use_mask device state variable is no longer in use.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-11-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
This is to make LLVM syntactic analysers happy.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-10-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Rather than remasking interrupts after a device reset in the main reset
path, allow selecting whether to do this with an additional bool parameter.
To this end, split reenabling job interrupts into two functions, one that
clears the interrupts and another one which unmasks them conditionally.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-9-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Up until now, panfrost_job_enable_interrupts() would always recalculate the
same job IRQ enablement mask, which is effectively a constant.
Replace it with a compile-time constant value, and also in another couple
places where an equivalent expression was being used.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-8-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
When mapping the pages of a BO, either a heap type at page fault time or
else a non-heap BO at object creation time, if the ARM page table mapping
function fails, we unmap what had been mapped so far and bail out.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-7-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
In the MMU's page fault ISR for a heap object, determine whether the
faulting address belongs to a 2MiB block that was already mapped by
checking its corresponding sgt in the Panfrost BO.
This is done in preparation for a future commit in which the MMU mapping
helper might fail, but the page array is left populated, so this cannot
be used as a check for an early bail-out.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-6-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
If we reach the beginning of the LRU AS list, then return an error.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-5-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Avoid waiting for the DRM scheduler job timedout handler, and instead, let
the DRM scheduler core signal the error fence immediately when HW job
submission fails.
That means we must also decrement the runtime-PM refcnt for the device,
because the job will never be enqueued or inflight.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-4-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Just in case we're dealing with a yet not recognised device.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-3-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Drop the deprecated DRM driver allocation method in favour of
devm_drm_dev_alloc(). Overall just make it the same as in Panthor.
Also discard now superfluous generic and platform device pointers inside
the main panfrost device structure.
Some ancient checkpatch issues unearthed as a result of these changes
were also fixed, like lines too long or double assignment in one line.
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-2-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Add device tree for 100ASK DShanPi A1 with Rockchip RK3576 SoC
(4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables
basic booting and connectivity.
Link: https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- M.2 WiFi slot
- 4 or 8GB of RAM
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- USB 3.0 port
- HDMI port
Signed-off-by: Hsun Lai <i@chainsx.cn>
Link: https://patch.msgid.link/77BB123A1F1E3D11+20251014021623.286121-3-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LinkEase EasePi R1 is a high-performance mini router based on RK3568.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://patch.msgid.link/20251014051226.64255-3-jjm2473@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LinkEase is a company focusing on the research and development of
network equipment and related software and hardware from Shenzhen.
Add vendor prefix for it.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://patch.msgid.link/20251014051226.64255-2-jjm2473@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use min_t() instead of min() to resolve compiler warnings for mismatched
types.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015153715.184143-1-youssef.abdulrahman@oss.qualcomm.com
Use check_add_overflow instead of size_add in sahara when
64b types are being added to ensure compatibility with 32b
systems. The size_add function parameters are of size_t, so
64b data types may be truncated when cast to size_t on 32b
systems. When using check_add_overflow, no type casts are made,
making it a more portable option.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015165408.213645-1-youssef.abdulrahman@oss.qualcomm.com
Do some clean up before returning the error code.
Fixes: 281c97376c ("ASoC: codecs: va-macro: Rework version checking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/aPMyw_ryay9LA5SW@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The VOP2 has limitations on its input and output sizes. The clipped
display region must be at least 4px in each dimension for both
framebuffer source and plane destination, and the clipped source region
must be no greater than a per-version limit.
It is never valid for VOP2 to have a framebuffer which is less than four
pixels in either dimension, so declare that as our min width/height,
enforced by AddFB failing if the user tries. It can theoretically be
valid to have a single large framebuffer of which only certain clipped
regions are shown, but this is a very uncommon case. Declaring to
userspace that the framebuffer's maximum width and height is the maximum
source clip helps it make better decisions as to which mode to use,
instead of trying unsupported sizes and having to fall back.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251015110042.41273-3-daniels@collabora.com
A plane check failing is a normal and expected condition, as userspace
isn't aware of the specific constraints and will try any and every
combination until one succeeds. Push this down to a debug message, so
users can see it if they want to, but make sure we don't spam the log
during normal operation.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251015110042.41273-2-daniels@collabora.com
When the crypto library provides an optimized implementation of
sha256_finup_2x(), use it to interleave the hashing of pairs of data
blocks. On some CPUs this nearly doubles hashing performance. The
increase in overall throughput of cold-cache dm-verity reads that I'm
seeing on arm64 and x86_64 is roughly 35% (though this metric is hard to
measure as it jumps around a lot).
For now this is done only on data blocks, not Merkle tree blocks. We
could use sha256_finup_2x() on Merkle tree blocks too, but that is less
important as there aren't as many Merkle tree blocks as data blocks, and
that would require some additional code restructuring.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In preparation for supporting interleaved hashing where dm-verity will
need to keep track of the real and wanted digests for multiple data
blocks simultaneously, stop using the want_digest and real_digest fields
of struct dm_verity_io from so many different places. Specifically:
- Make various functions take want_digest as a parameter rather than
having it be implicitly passed via the struct dm_verity_io.
- Add a new tmp_digest field, and use this instead of real_digest when
computing a digest solely for the purpose of immediately checking it.
The result is that real_digest and want_digest are used only by
verity_verify_io().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When the hash algorithm is SHA-256 and the verity version is not 0, use
the SHA-256 library instead of crypto_shash.
This is a prerequisite for making dm-verity interleave the computation
of SHA-256 hashes for increased performance. That optimization is
available in the SHA-256 library but not in crypto_shash.
Even without interleaved hashing, switching to the library also slightly
improves performance by itself because it avoids the overhead of
crypto_shash, including indirect calls and other API overhead.
(Benchmark on x86_64, AMD Zen 5: hashing 4K blocks gets 2.1% faster.)
SHA-256 is by far the most common hash algorithm used with dm-verity.
It makes sense to optimize for the common case and fall back to the
generic crypto layer for uncommon cases, as suggested by Linus:
https://lore.kernel.org/r/CAHk-=wgp-fOSsZsYrbyzqCAfEvrt5jQs1jL-97Wc4seMNTUyng@mail.gmail.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
I added this log message in commit bbf6a56692 ("dm verity: log the
hash algorithm implementation"), to help people debug issues where they
forgot to enable the architecture-optimized SHA-256 code in their
kconfig or accidentally enabled a slow hardware offload driver (such as
QCE) that overrode the faster CPU-accelerated code. However:
- The crypto layer now always enables the architecture-optimized SHA-1,
SHA-256, and SHA-512 code. Moreover, for simplicity the driver name
is now fixed at "sha1-lib", "sha256-lib", etc.
- dm-verity now uses crypto_shash instead of crypto_ahash, preventing
the mistake of accidentally using a slow driver such as QCE.
Therefore, this log message generally no longer provides useful
information. Remove it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Add a CLASS to handle getting and putting a guest_memfd file given a
memslot to reduce the amount of related boilerplate, and more importantly
to minimize the chances of forgetting to put the file (thankfully the bug
that prompted this didn't escape initial testing).
Define a CLASS instead of using __free(fput) as _free() comes with subtle
caveats related to FILO ordering (objects are freed in the order in which
they are declared), and the recommended solution/workaround (declare file
pointers exactly when they are initialized) is visually jarring relative
to KVM's (and the kernel's) overall strict adherence to not mixing
declarations and code. E.g. the use in kvm_gmem_populate() would be:
slot = gfn_to_memslot(kvm, start_gfn);
if (!kvm_slot_has_gmem(slot))
return -EINVAL;
struct file *file __free(fput) = kvm_gmem_get_file(slot;
if (!file)
return -EFAULT;
filemap_invalidate_lock(file->f_mapping);
Note, using CLASS() still declares variables in the middle of code, but
the syntactic sugar obfuscates the declaration, i.e. hides the anomaly to
a large extent.
No functional change intended.
Link: https://lore.kernel.org/r/20251007222356.348349-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track a guest_memfd instance's flags in gmem_inode instead of burying them
in i_private. Burning an extra 8 bytes per inode is well worth the added
clarity provided by explicit tracking.
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add tests for NUMA memory policy binding and NUMA aware allocation in
guest_memfd. This extends the existing selftests by adding proper
validation for:
- KVM GMEM set_policy and get_policy() vm_ops functionality using
mbind() and get_mempolicy()
- NUMA policy application before and after memory allocation
Run the NUMA mbind() test with and without INIT_SHARED, as KVM should allow
doing mbind(), madvise(), etc. on guest-private memory, e.g. so that
userspace can set NUMA policy for CoCo VMs.
Run the NUMA allocation test only for INIT_SHARED, i.e. if the host can't
fault-in memory (via direct access, madvise(), etc.) as move_pages()
returns -ENOENT if the page hasn't been faulted in (walks the host page
tables to find the associated folio)
[sean: don't skip entire test when running on non-NUMA system, test mbind()
with private memory, provide more info in assert messages]
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add NUMA helpers to probe for support/availability and to check if the
test is running on a multi-node system. The APIs will be used to verify
guest_memfd NUMA support.
Signed-off-by: Shivank Garg <shivankg@amd.com>
[sean: land helpers in numaif.h, add comments, tweak names]
Link: https://lore.kernel.org/r/20251016172853.52451-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the KVM's re-definitions of MPOL_xxx flags in numaif.h as they are
defined by the already-included, kernel-provided mempolicy.h. The only
reason the duplicate definitions don't cause compiler warnings is because
they are identical, but only on x86-64! The syscall numbers in particular
are subtly x86_64-specific, i.e. will cause problems if/when numaif.h is
used outsize of x86.
Opportunistically clean up the file comment as the license information is
covered by the SPDX header, the path is superfluous, and as above the
comment about the contents is flat out wrong.
Fixes: 346b59f220 ("KVM: selftests: Add missing header file needed by xAPIC IPI tests")
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
