Commit graph

1,403,262 commits

Author SHA1 Message Date
Swathi K S
ebeab0be70 arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC
The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
FSYS0 block and other in PERIC block.
The ethernet interface is connected to a switch which is not managed by
Linux.

Adds device tree node for Ethernet in PERIC Block and enables the same for
FSD platform.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Link: https://lore.kernel.org/r/20250307044904.59077-3-swathi.ks@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-04-08 17:59:41 +02:00
Swathi K S
1d62af229b arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC
The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one
in FSYS0 block and other in PERIC block.
The ethernet interface is managed by a switch which is not managed by
Linux.

Adds device tree node for Ethernet in FSYS0 Block and enables the same for
FSD platform.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Link: https://lore.kernel.org/r/20250307044904.59077-2-swathi.ks@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-04-08 17:59:40 +02:00
Maxime Ripard
8b6f2e2843
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_connector_helper_tv_get_modes_check() test never does however,
which leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 1e4a91db10 ("drm/probe-helper: Provide a TV get_modes helper")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-7-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:28:25 +02:00
Maxime Ripard
f02d3bfcd3
drm/tests: modes: Fix drm_display_mode memory leak
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_modes_analog_tv_mono_576i() test never does however, which
leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: e315384899 ("drm/tests: Add tests for the new Monochrome value of tv_mode")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-6-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:28:21 +02:00
Maxime Ripard
d34146340f
drm/tests: modes: Fix drm_display_mode memory leak
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_modes_analog_tv tests never
do however, which leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 4fcd238560 ("drm/modes: Add a function to generate analog display modes")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-5-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:28:17 +02:00
Maxime Ripard
70f29ca311
drm/tests: cmdline: Fix drm_display_mode memory leak
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_cmdline_tv_options() test
never does however, which leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: e691c9992a ("drm/modes: Introduce the tv_mode property as a command-line option")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-4-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:28:14 +02:00
Maxime Ripard
9b0827ba82
drm/tests: modeset: Fix drm_display_mode memory leak
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_pick_cmdline_named() test
never does however, which leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: fedcaf726f ("drm/modes: Properly generate a drm_display_mode from a named mode")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-3-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:28:10 +02:00
Maxime Ripard
dacafdcc77
drm/tests: modeset: Fix drm_display_mode memory leak
drm_mode_find_dmt() returns a drm_display_mode that needs to be
destroyed later one. The drm_test_pick_cmdline_res_1920_1080_60() test
never does however, which leads to a memory leak.

Let's make sure it's freed.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 8fc0380f6b ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-2-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:27:53 +02:00
Mark Brown
7d7c47281c
spi: spi-stm32-ospi: dt-bindings fixes
Merge series from Patrice Chotard <patrice.chotard@foss.st.com>:

Make "resets" property mandatory.
Update spi-stm32-ospi driver and dt-bindings accordingly.
2025-04-08 16:27:42 +01:00
Maxime Ripard
13c1d5f3a7
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
A number of test suites call functions that expect the returned
drm_display_mode to be destroyed eventually.

However, none of the tests called drm_mode_destroy, which results in a
memory leak.

Since drm_mode_destroy takes two pointers as argument, we can't use a
kunit wrapper. Let's just create a helper every test suite can use.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-1-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-04-08 17:26:58 +02:00
Mark Brown
4a7c28e659
regulator: rpi-panel-attiny: use new GPIO line value
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. We're in the process of
converting all GPIO drivers to using the new API. This series converts
the only GPIO controller under drivers/regulator/ and - while at it -
refactors the code a bit.
2025-04-08 16:15:52 +01:00
Cheng Ming Lin
594c8df92b mtd: spi-nor: macronix: Add fixups for MX25L3255E
SFDP of MX25L3255E is JESD216, which does not include the Quad
Enable bit Requirement in BFPT. As a result, during BFPT parsing,
the quad_enable method is not set to spi_nor_sr1_bit6_quad_enable.
Therefore, it is necessary to correct this setting by late_init.

In addition, MX25L3255E also supports 1-4-4 page program in 3-byte
address mode. However, since the 3-byte address 1-4-4 page program
is not defined in SFDP, it needs to be configured in late_init.

Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
[pratyush@kernel.org: move params declaration to top, and use it everywhere]
Link: https://lore.kernel.org/r/20250407075400.1113177-4-linchengming884@gmail.com
2025-04-08 15:04:54 +00:00
Cheng Ming Lin
c425efacec mtd: spi-nor: macronix: Remove duplicate flash info entries
To clean up the code and reduce duplication, this entry is removed.

Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250407075400.1113177-3-linchengming884@gmail.com
2025-04-08 15:00:51 +00:00
Cheng Ming Lin
947c86e481 mtd: spi-nor: macronix: Drop the redundant flash info fields
Many flash devices share the same ID but have different part numbers.
To avoid confusion, the part number field is removed.

Additionally, since SFDP already provides size information and
functionality covered by no_sfdp_flags, these fields are also removed.

Furthermore, when 4-byte address instruction table is available,
the SPI_NOR_4B_OPCODES flag is no longer needed and is removed.

Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250407075400.1113177-2-linchengming884@gmail.com
2025-04-08 15:00:51 +00:00
Wolfram Sang
d370586746 rtc: da9063: simplify irq management
The code for enabling and disabling the irq is so similar that it can
easily be handled by one function. Like in most other RTC drivers. Save
the duplicated code and one layer of indirection.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250320102218.10781-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 16:43:41 +02:00
Maxime Ripard
6c3c8b35d1 drm/panel: boe-tv101wum-ll2: Fix compilation build
Commit 5d2b55e55e ("panel/boe-tv101wum-ll2: Use refcounted allocation
in place of devm_kzalloc()") switched from a kmalloc + drm_panel_init
call to a devm_drm_panel_alloc one.

However, the variable it was storing the allocated pointer in doesn't
exist, resulting in a compilation breakage.

Fixes: 5d2b55e55e ("panel/boe-tv101wum-ll2: Use refcounted allocation in place of devm_kzalloc()")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408122008.1676235-3-mripard@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-08 17:35:56 +03:00
Maxime Ripard
bce319a160 drm/panel: boe-th101mb31ig002-28a: Fix compilation build
Commit 77dcbce637 ("panel/th101mb31ig002-28a: Use refcounted
allocation in place of devm_kzalloc()") switched from a kmalloc +
drm_panel_init call to a devm_drm_panel_alloc one.

However, the variable it was storing the allocated pointer in doesn't
exist, resulting in a compilation breakage.

Fixes: 77dcbce637 ("panel/th101mb31ig002-28a: Use refcounted allocation in place of devm_kzalloc()")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408122008.1676235-2-mripard@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-08 17:35:52 +03:00
Maxime Ripard
a46b02f7a8 drm/panel: auo-a030jtn01: Fix compilation build
Commit 9d7d7c3c9a ("panel/auo-a030jtn01: Use refcounted allocation in
place of devm_kzalloc()") switched from a kmalloc + drm_panel_init call
to a devm_drm_panel_alloc one.

However, the variable it was storing the allocated pointer in doesn't
exist, resulting in a compilation breakage.

Fixes: 9d7d7c3c9a ("panel/auo-a030jtn01: Use refcounted allocation in place of devm_kzalloc()")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408122008.1676235-1-mripard@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-08 17:35:45 +03:00
Wolfram Sang
0bddd060a6 rtc: rzn1: clear interrupts on remove
It is good practice to clear running interrupts before removing the
driver. This is not really a bugfix because on current systems RuntimePM
will disable the module clock, so interrupts won't be initiated. The
dependency on that behaviour is subtle, though. Better be self-contained
and clean up when removing.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250312100105.36767-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 16:17:45 +02:00
Wolfram Sang
8003a5585f rtc: sh: minor fixes to adhere to coding style
Use the BIT macro, use curly braces for else-blocks, don't split strings
over multiple lines, annotate the lock, update copyright.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-18-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
ea59ad0ca9 rtc: sh: use local variables in probe() for mapping IO
No need to store the resource for the registers in the per-device struct
because we only need it during probe. Remove some unneeded unlikely()
while here and correct the type of 'regsize'.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-17-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
33df0a509d rtc: sh: remove useless wrapper function
The wrapper to enable interrupts is so thin that we can use it directly.
Also gets rid of an 'inline' which doesn't make sense here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-16-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
689602e060 rtc: sh: simplify irq setup after refactoring
We only need the alarm_irq handler. That means we can remove everything
related to periodic_irq and carry_irq. Also, the shared handler can go
since we only we need the alarm interrupt in any case.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-15-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
a7e7d966cc rtc: sh: remove periodic interrupt handling
Because periodic interrupts are emulated by the RTC core, the PIE
handling code can simply go away now. And with it the custom proc-file.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-14-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
fb06b6b54b rtc: sh: only disable carry interrupts in probe()
With old, custom UIE handling removed, we can now disable the carry
interrupt in probe() and leave it like this. No further handling is
required.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-13-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
c090d390e5 rtc: sh: remove update interrupt handling
Since commit e428c6a277 ("RTC: Clean out UIE icotl implementations"),
the flag for UIE cannot be set anymore. Because UIE is now handled via
regular alarms and a timerqueue by the RTC core, the UIE handling code
can simply go away now.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-12-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:19 +02:00
Wolfram Sang
8f2efdbc30 rtc: sh: assign correct interrupts with DT
The DT bindings for this driver define the interrupts in the order as
they are numbered in the interrupt controller. The old platform_data,
however, listed them in a different order. So, for DT based platforms,
they are mixed up. Assign them specifically for DT, so we can keep the
bindings stable. After the fix, 'rtctest' passes again on the Renesas
Genmai board (RZ-A1 / R7S72100).

Fixes: dab5aec64b ("rtc: sh: add support for rza series")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-11-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08 15:56:18 +02:00
Maxime Chevallier
4f038a6a02 net: ethtool: Don't call .cleanup_data when prepare_data fails
There's a consistent pattern where the .cleanup_data() callback is
called when .prepare_data() fails, when it should really be called to
clean after a successful .prepare_data() as per the documentation.

Rewrite the error-handling paths to make sure we don't cleanup
un-prepared data.

Fixes: c781ff12a2 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 15:34:15 +02:00
Toke Høiland-Jørgensen
369609fc62 tc: Ensure we have enough buffer space when sending filter netlink notifications
The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].

Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.

To trigger this, run the following commands:

 # ip link add type veth
 # tc qdisc replace dev veth0 root handle 1: fq_codel
 # tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)

Before this fix, tc just returns:

Not a filter(cmd 2)

After the fix, we get the correct echo:

added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
  match 00000000/00000000 at 0
	action order 1:  pedit action pass keys 1
 	index 1 ref 1 bind 1
	key #0  at 20: val 00000016 mask ffff0000
[repeated 32 times]

[0] 106ef21860

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 13:57:49 +02:00
Jiawen Wu
13e7d7240a net: libwx: Fix the wrong Rx descriptor field
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this
field stores the 802.1ad ID from which the packet was received. The wrong
definition caused the statistics rx_csum_offload_errors to fail to grow
when receiving the 802.1ad packet with incorrect checksum.

Fixes: ef4f3c19f9 ("net: wangxun: libwx add rx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 13:47:47 +02:00
Raju Rangoju
34a07c5b25 amd-xgbe: Convert to SPDX identifier
Use SPDX-License-Identifier accross all the files of the xgbe driver to
ensure compliance with Linux kernel standards, thus removing the
boiler-plate template license text.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 13:26:33 +02:00
Bartosz Golaszewski
5e21900ef6
spi: xcomm: use new GPIO line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-spi-v1-1-597660766654@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08 12:16:10 +01:00
Roger Pau Monne
64a66e2c3b x86/xen: disable CPU idle and frequency drivers for PVH dom0
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers.  However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.

Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.

On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
2025-04-08 13:15:56 +02:00
Daisuke Matsuda
6703cb3dce RDMA/rxe: Enable ODP in RDMA FLUSH operation
For persistent memories, add rxe_odp_flush_pmem_iova() so that ODP specific
steps are executed. Otherwise, no additional consideration is required.

Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250324075649.3313968-2-matsuda-daisuke@fujitsu.com
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-08 07:13:56 -04:00
Thorsten Blum
4acdd3de31 rocker: Simplify if condition in ofdpa_port_fdb()
Remove the double negation and simplify the if condition.

No functional changes intended.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407091442.743478-1-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 13:11:29 +02:00
Bartosz Golaszewski
936df52c29
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-4-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08 12:05:42 +01:00
Bartosz Golaszewski
50faedda12
regulator: rpi-panel-attiny: use lock guards for the state mutex
Use mutex lock guards from linux/cleanup.h to simplify the driver code.

Note that ret must be initialized in order to avoid a build warning as
scoped_guard() is implemented as a for loop.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-3-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08 12:05:42 +01:00
Bartosz Golaszewski
1326e295d6
regulator: rpi-panel-attiny: use devres for mutex management
Simplify the probe() code and remove the remove() callback by using
devres to manage the mutex resources.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-2-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08 12:05:41 +01:00
Bartosz Golaszewski
06bab1f101
regulator: rpi-panel-attiny: don't double-check GPIO range
GPIO core already checks GPIO ranges, there's no need to check it again
in the set() callback.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-1-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08 12:05:40 +01:00
Julian Vetter
fc2e4f4f7b eth: nfp: remove __get_unaligned_cpu32 from netronome drivers
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.

Signed-off-by: Julian Vetter <julian@outer-limits.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407083306.1553921-1-julian@outer-limits.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 12:51:18 +02:00
Thorsten Blum
48afd55505 hamradio: Remove unnecessary strscpy_pad() size arguments
If the destination buffer has a fixed length, strscpy_pad()
automatically determines its size using sizeof() when the argument is
omitted. This makes the explicit sizeof() calls unnecessary - remove
them.

No functional changes intended.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250407082607.741919-2-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 12:38:47 +02:00
Hariprasad Kelam
b7db94734e octeontx2-pf: qos: fix VF root node parent queue index
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.

This ensure at any given point of time PF traffic gets more priority.

                    PF root node
                      TL1
                     /  \
                    TL2  TL2 VF root node
                    /     \
                   TL3    TL3
                   /       \
                  TL4      TL4
                  /         \
                 SMQ        SMQ

Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors

Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 12:32:55 +02:00
Thorsten Blum
ee9c3082f1 ALSA: cs46xx: Remove commented out code
The code has been commented out ever since commit 1da177e4c3
("Linux-2.6.12-rc2"), remove it.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250408083015.796638-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-08 11:53:45 +02:00
Paolo Bonzini
c478032df0 KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
    stage-1 page tables) to align with the architecture. This avoids
    possibly taking an SEA at EL2 on the page table walk or using an
    architecturally UNKNOWN fault IPA.
 
  - Use acquire/release semantics in the KVM FF-A proxy to avoid reading
    a stale value for the FF-A version.
 
  - Fix KVM guest driver to match PV CPUID hypercall ABI.
 
  - Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
    selftests, which is the only memory type for which atomic
    instructions are architecturally guaranteed to work.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ/RO9hccb2xpdmVyLnVw
 dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFmRuAP0YajO4qHJe1vHtCkamuPnEY0Kp
 E+t2TwPafPbrPdQ1PgEAq6lHuSdUnid1r/uhRKIT+ywW8tE97eNwQAa1LFma0Ac=
 =d4G5
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64: First batch of fixes for 6.15

 - Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
   stage-1 page tables) to align with the architecture. This avoids
   possibly taking an SEA at EL2 on the page table walk or using an
   architecturally UNKNOWN fault IPA.

 - Use acquire/release semantics in the KVM FF-A proxy to avoid reading
   a stale value for the FF-A version.

 - Fix KVM guest driver to match PV CPUID hypercall ABI.

 - Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
   selftests, which is the only memory type for which atomic
   instructions are architecturally guaranteed to work.
2025-04-08 05:49:31 -04:00
Maxime Ripard
92a2bf257e dma-buf: heaps: system: Remove global variable
The system heap is storing its struct dma_heap pointer in a global
variable but isn't using it anywhere.

Let's move the global variable into system_heap_create() to make it
local.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250407-dma-buf-ecc-heap-v3-1-97cdd36a5f29@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
2025-04-08 11:48:39 +02:00
Thorsten Blum
080410fe61 ALSA: azt2320: Replace deprecated strcpy() with strscpy()
strcpy() is deprecated, use strscpy() instead.

Link: https://github.com/KSPP/linux/issues/88
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250407090832.743255-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-08 11:48:37 +02:00
Jakub Kicinski
a1328a671e selftests: tls: check that disconnect does nothing
"Inspired" by syzbot test, pre-queue some data, disconnect()
and try to receive(). This used to trigger a warning in TLS's strp.
Now we expect the disconnect() to have almost no effect.

Link: https://lore.kernel.org/67e6be74.050a0220.2f068f.007e.GAE@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 11:38:49 +02:00
Jakub Kicinski
5071a1e606 net: tls: explicitly disallow disconnect
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.

The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:

  WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
  RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
  Call Trace:
   <TASK>
   tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
   tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
   inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
   sock_recvmsg_nosec net/socket.c:1023 [inline]
   sock_recvmsg+0x109/0x280 net/socket.c:1045
   __sys_recvfrom+0x202/0x380 net/socket.c:2237

Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 11:38:49 +02:00
Ricardo Cañuelo Navarro
f1a69a940d sctp: detect and prevent references to a freed transport in sendmsg
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.

There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().

This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.

This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").

Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.

If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.

The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).

Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08 11:34:06 +02:00
Sudeep Holla
4567bdaaaa firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
Completion of the FFA_PARTITION_INFO_GET ABI transfers the ownership of
the caller’s Rx buffer from the producer(typically partition mnager) to
the consumer(this driver/OS). FFA_RX_RELEASE transfers the ownership
from the consumer back to the producer.

However, when we set the flag to just return the count of partitions
deployed in the system corresponding to the specified UUID while
invoking FFA_PARTITION_INFO_GET, the Rx buffer ownership shouldn't be
transferred to this driver. We must be able to skip transferring back
the ownership to the partition manager when we request just to get the
count of the partitions as the buffers are not acquired in this case.

Firmware may return FFA_RET_DENIED or other error for the ffa_rx_release()
in such cases.

Fixes: bb1be74985 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Message-Id: <20250321115700.3525197-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-04-08 10:32:15 +01:00