This allows using amdgpu_sync even without peeking into the fences for a
long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the critical submission path memory allocations can't wait for
reclaim since that can potentially wait for submissions to finish.
Finally clean that up and mark most memory allocations in the critical
path with GFP_NOWAIT. The only exception left is the dma_fence_array()
used when no VMID is available, but that will be cleaned up later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 55ff973fe1.
Reason for revert: this causes some tests fail with call trace.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, skip the SDMA queue reset and return
error. The engine/queue reset failure will trigger
FLR in the sequence.
v2: do not add queue reset support mask for sriov
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add case for 13.0.12.
Signed-off-by: Ahmad Rehman <ahrehman@amd.com>
Reviewed-by: Vignesh.Chander@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables ras to be resumed after gpu recovery on mi350 sriov.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clause instructions with precise memory enabled currently hang the
shader so set capabilities flag to disabled since it's unsafe to use
for debugging.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce and use a helper to iterate over the various pinned bo lists.
There are a couple of slight functional changes:
1) GGTT maps are now performed with the bo locked.
2) If the per-bo callback fails, keep the bo on the original list.
v2:
- Skip unrelated change in xe_bo.c
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321133709.75327-1-thomas.hellstrom@linux.intel.com
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. The first parameter is NULL here so nothing else needs to
be done.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250319092951.37667-32-jirislaby@kernel.org
[ij: Removed unnecessary details from the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
mipi-sdca-ge-selectedmode-controls-affected is actually required by the
specification so the code should return an error if it is missing.
Reported-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Fixes: 13fe7497af19 ("ASoC: SDCA: Add support for GE Entity properties")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250321135324.380237-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Link: https://lore.kernel.org/r/20250319092951.37667-10-jirislaby@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There should be no blank line between the YAML opening header and the
schema '$id'.
Reported-by: Florin Leotescu (OSS) <florin.leotescu@oss.nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250321080212.18013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When load this mode, we can see the following log:
"power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info()."
So replace hwmon_device_register with hwmon_device_register_with_info.
These attributes, 'power_accuracy', 'power_cap_hyst', 'power_average_min'
and 'power_average_max', should have been placed in hwmon_chip_info as
power data type. But these attributes are displayed as string format on
the following case:
a) power1_accuracy --> display like '90.0%'
b) power1_cap_hyst --> display 'unknown' when its value is 0xFFFFFFFF
c) power1_average_min/max --> display 'unknown' when its value is
negative.
To avoid any changes in the display of these sysfs interfaces, we can't
modifiy the type of these attributes in hwmon core and have to put them
to extra_groups.
Please note that the path of these sysfs interfaces are modified
accordingly if use hwmon_device_register_with_info():
old: all sysfs interfaces are under acpi device, namely,
/sys/class/hwmon/hwmonX/device/
now: all sysfs interfaces are under hwmon device, namely,
/sys/class/hwmon/hwmonX/
The new ABI does not guarantee that the underlying path remains the same.
But we have to accept this change so as to replace the deprecated API.
Fortunately, some userspace application, like libsensors, would scan
the two path and handles this automatically. So we can accept this change
so as to drop the deprecated message.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250319020638.59925-1-lihuisong@huawei.com
[groeck: Fixed some multi-line alignment issues;
reverted to 32-bit arithmetic in power1_accuracy_show()
fixed bad return code from power_meter_is_visible()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A couple of small fixes, plus some new device IDs - nothing super urgent
here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfda28ACgkQJNaLcl1U
h9AxVgf/fs1dLdhwApd1jEJKNaqhagC8s9phd3KvT2jEgCqytguzHMfmWIlhtwaU
VpKyB0tZm1lkqbtjbVnQOqKXTLTEObwmhI9kkggbn2PhDBxzGJk54a2AbY6eUplU
1bl4/iontW3NY97DO4dr95mAwKOe6N9N23M27yklVUxwPxt9NSydPVZyVRVxmsYN
us5eT1BdrY8InXAxdpR5NEwCejRMiNRJzFEZlmlzdtk/ooW4vniLhk7JSrkc3/DR
VH3tsXe62G8EEgSs9r8NIxdjc9MDT5gn/cMob0bjFP07H9pq+V2uqrEBD54gRhGN
1KIb/hWcVeCA2O5Px32Bh1KAUang1w==
=q729
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.14-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A couple of small fixes, plus some new device IDs - nothing super urgent
here.
Previously, the admin would need to set the xprt state to "offline"
before attempting to remove. This patch adds a new sysfs attr that does
both these steps in a single call.
Suggested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Link: https://lore.kernel.org/r/20250207204225.594002-6-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Writing to this file will clone the 'main' xprt of an xprt_switch and
add it to be used as an additional connection.
--
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
v3: Replace call to xprt_iter_get_xprt() with xprt_iter_get_next()
Link: https://lore.kernel.org/r/20250207204225.594002-5-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
These files display useful information about the RPC client, such as the
rpc version number, program name, and maximum number of connections
allowed.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Link: https://lore.kernel.org/r/20250207204225.594002-4-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This allows the admin to check the TLS configuration for each xprt.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Link: https://lore.kernel.org/r/20250207204225.594002-3-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The Linux NFS server added support for returning this information during
an EXCHANGE_ID in Linux v6.13. This is something and admin might want to
query, so let's add it to sysfs.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Link: https://lore.kernel.org/r/20250207204225.594002-2-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There are certain users that wish to force the NFS client to choose
READDIRPLUS over READDIR for a particular mount. Update the "rdirplus" mount
option to optionally accept values. For "rdirplus=force", the NFS client
will always attempt to use READDDIRPLUS. The setting of "rdirplus=none" is
aliased to the existing "nordirplus".
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/c4cf0de4c8be0930b91bc74bee310d289781cd3b.1741885071.git.bcodding@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
More HP EliteBook with Realtek HDA codec ALC3247 with combined CS35L56
Amplifiers need quirk ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-2-chris.chiu@canonical.com
More HP laptops with Realtek HDA codec ALC3315 with combined CS35L56
Amplifiers need quirk ALC285_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-1-chris.chiu@canonical.com
Commit 673ce00c5d ("ARM: omap2plus_defconfig: Add support for distros
with systemd") said it's because of recommendation from systemd. But
systemd changed their recommendation later.[1]
For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it
needs an RT budget assigned, otherwise the processes in it will not be able to
get RT at all. The problem with RT group scheduling is that it requires the
budget assigned but there's no way we could assign a default budget, since the
values to assign are both upper and lower time limits, are absolute, and need to
be sum up to < 1 for each individal cgroup. That means we cannot really come up
with values that would work by default in the general case.[2]
For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller
can only be enabled when all RT processes are in the root cgroup. But it will
lose the benefits of cgroup v2 if all RT process were placed in the same cgroup.
Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't
support it.
[1]: f4e74be185
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Potentially include errata for Landlock ABI v5 (Linux 6.10) and v6
(Linux 6.12). That will be useful for the following signal scoping
erratum.
As explained in errata.h, this commit should be backportable without
conflict down to ABI v5. It must then not include the errata/abi-6.h
file.
Fixes: 54a6e6bbf3 ("landlock: Add signal scoping")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
To ease backports in setup.c, let's group changes from
__lsm_ro_after_init to __ro_after_init with commit f22f9aaf6c
("selinux: remove the runtime disable functionality"), and the
landlock_lsmid addition with commit f3b8788cde ("LSM: Identify modules
by more than name").
That will help to backport the following errata.
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-2-mic@digikod.net
Fixes: f3b8788cde ("LSM: Identify modules by more than name")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Tidy up ACPI ID table:
- Drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h and
other necessary headers
- Remove explicit driver_data initializer
- Drop comma in the terminator entry
With that done, extend compile test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250313161630.415515-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use strscpy() to copy the NUL-terminated string 'p' to the destination
buffer instead of using memcpy() followed by a manual NUL-termination.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calling cra_destroy by hand, call it through
crypto_alg_put so that the correct unwinding functions are called
through crypto_destroy_alg.
Fixes: 3d6979bf3b ("crypto: api - Add cra_type->destroy hook")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All implementations of chacha_init_arch() just call
chacha_init_generic(), so it is pointless. Just delete it, and replace
chacha_init() with what was previously chacha_init_generic().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' compression API has been superseded by the acomp API, which
is a bit more cumbersome to use, but ultimately more flexible when it
comes to hardware implementations.
Now that all the users and implementations have been removed, let's
remove the core plumbing of the 'comp' API as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>