Previously, iomap_readpage_iter() returning 0 would break out of the
loops of iomap_readahead_iter(), which is what iomap_read_inline_data()
relies on.
However, commit d9dc477ff6 ("iomap: advance the iter directly on
buffered read") changes this behavior without calling
iomap_iter_advance(), which causes EROFS to get stuck in
iomap_readpage_iter().
It seems iomap_iter_advance() cannot be called in
iomap_read_inline_data() because of the iomap_write_begin() path, so
handle this in iomap_readpage_iter() instead.
Reported-and-tested-by: Bo Liu <liubo03@inspur.com>
Fixes: d9dc477ff6 ("iomap: advance the iter directly on buffered read")
Cc: Brian Foster <bfoster@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250319085125.4039368-1-hsiangkao@linux.alibaba.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
- Pass XFD_ERR as a psueo-payload when injecting #NM as a preparatory step
for upcoming FRED virtualization support.
- Decouple the EPT entry RWX protection bit macros from the EPT Violation bits
as a general cleanup, and in anticipation of adding support for emulating
Mode-Based Execution (MBEC).
- Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
- Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
-----BEGIN PGP SIGNATURE-----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=SAgZ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.15
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
- Pass XFD_ERR as a psueo-payload when injecting #NM as a preparatory step
for upcoming FRED virtualization support.
- Decouple the EPT entry RWX protection bit macros from the EPT Violation bits
as a general cleanup, and in anticipation of adding support for emulating
Mode-Based Execution (MBEC).
- Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
- Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
- Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
- Fix a few minor bugs related to handling of stats FDs.
- Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
- Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=t77Q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.15, part 2
- Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
- Fix a few minor bugs related to handling of stats FDs.
- Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
- Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
- Misc cleanups and fixes.
- Misc cleanups and prep work.
- Annotate _no_printf() with "printf" so that pr_debug() statements are
checked by the compiler for default builds (and pr_info() when QUIET).
- Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. The theory is that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
- Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
-----BEGIN PGP SIGNATURE-----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=RjiY
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_6.15-1' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.15, part 1
- Misc cleanups and prep work.
- Annotate _no_printf() with "printf" so that pr_debug() statements are
checked by the compiler for default builds (and pr_info() when QUIET).
- Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. The theory is that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
- Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=8SGF
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
Add support for "fast" aging of SPTEs in both the TDP MMU and Shadow MMU, where
"fast" means "without holding mmu_lock". Not taking mmu_lock allows multiple
aging actions to run in parallel, and more importantly avoids stalling vCPUs,
e.g. due to holding mmu_lock for an extended duration while a vCPU is faulting
in memory.
For the TDP MMU, protect aging via RCU; the page tables are RCU-protected and
KVM doesn't need to access any metadata to age SPTEs.
For the Shadow MMU, use bit 1 of rmap pointers (bit 0 is used to terminate a
list of rmaps) to implement a per-rmap single-bit spinlock. When aging a gfn,
acquire the rmap's spinlock with read-only permissions, which allows hardening
and optimizing the locking and aging, e.g. locking an rmap for write requires
mmu_lock to also be held. The lock is NOT a true R/W spinlock, i.e. multiple
concurrent readers aren't supported.
To avoid forcing all SPTE updates to use atomic operations (clearing the
Accessed bit out of mmu_lock makes it inherently volatile), rework and rename
spte_has_volatile_bits() to spte_needs_atomic_update() and deliberately exclude
the Accessed bit. KVM (and mm/) already tolerates false positives/negatives
for Accessed information, and all testing has shown that reducing the latency
of aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
-----BEGIN PGP SIGNATURE-----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=Iy57
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM x86/mmu changes for 6.15
Add support for "fast" aging of SPTEs in both the TDP MMU and Shadow MMU, where
"fast" means "without holding mmu_lock". Not taking mmu_lock allows multiple
aging actions to run in parallel, and more importantly avoids stalling vCPUs,
e.g. due to holding mmu_lock for an extended duration while a vCPU is faulting
in memory.
For the TDP MMU, protect aging via RCU; the page tables are RCU-protected and
KVM doesn't need to access any metadata to age SPTEs.
For the Shadow MMU, use bit 1 of rmap pointers (bit 0 is used to terminate a
list of rmaps) to implement a per-rmap single-bit spinlock. When aging a gfn,
acquire the rmap's spinlock with read-only permissions, which allows hardening
and optimizing the locking and aging, e.g. locking an rmap for write requires
mmu_lock to also be held. The lock is NOT a true R/W spinlock, i.e. multiple
concurrent readers aren't supported.
To avoid forcing all SPTE updates to use atomic operations (clearing the
Accessed bit out of mmu_lock makes it inherently volatile), rework and rename
spte_has_volatile_bits() to spte_needs_atomic_update() and deliberately exclude
the Accessed bit. KVM (and mm/) already tolerates false positives/negatives
for Accessed information, and all testing has shown that reducing the latency
of aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
-----BEGIN PGP SIGNATURE-----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=O0Vg
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Holding the pte lock for the page that is being converted to secure is
needed to avoid races. A previous commit removed the locking, which
caused issues. Fix by locking the pte again.
When mounting a user-space filesystem using io_uring, the initialization
of the rings is done separately in the server side. If for some reason
(e.g. a server bug) this step is not performed it will be impossible to
unmount the filesystem if there are already requests waiting.
This issue is easily reproduced with the libfuse passthrough_ll example,
if the queue depth is set to '0' and a request is queued before trying to
unmount the filesystem. When trying to force the unmount, fuse_abort_conn()
will try to wake up all tasks waiting in fc->blocked_waitq, but because the
rings were never initialized, fuse_uring_ready() will never return 'true'.
Fixes: 3393ff964e ("fuse: block request allocation until io-uring init is complete")
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://lore.kernel.org/r/20250306111218.13734-1-luis@igalia.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: linux-sound@vger.kernel.org
Link: https://patch.msgid.link/20250319092951.37667-36-jirislaby@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are only two differences between snd_soc_put_volsw() and
snd_soc_put_volsw_sx(). The maximum field is handled differently, and
snd_soc_put_volsw() supports double controls with both values in the
same register.
Factor out the common code into a new helper and pass in the
appropriate max value such that it is handled correctly for each
control.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_info_volsw() and snd_soc_info_volsw_sx() do very similar
things, and have a lot of code in common. Already this is causing
some issues as the detection of volume controls has been fixed
in the normal callback but not the sx callback. Factor out a new
helper containing the common code and leave the function specific
bits behind in each callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the soc_mixer_ctl_to_reg() helper it is now very
clear that the only difference between snd_soc_put_volsw() and
snd_soc_put_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the soc_mixer_reg_to_ctl() helper it is now very
clear that the only difference between snd_soc_get_volsw() and
snd_soc_get_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only difference between snd_soc_info_volsw() and
snd_soc_info_volsw_range() is that the later will not force a 2
value control to be of type integer if the name ends in "Volume".
The kernel currently contains no users of snd_soc_info_volsw_range()
that would return a boolean control with this code, so the risk is
quite low and it seems appropriate that it should contain volume
control detection. So remove snd_soc_info_volsw_range() and point its
users at snd_soc_info_volsw().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to convert from control values to register values
that can replace a lot of the duplicated code in the various put
handlers.
This also fixes a small issue in snd_soc_put_volsw where the value is
converted to a control value before doing the invert, but the invert
is done against the register max which will result in incorrect values
for inverted controls with a non-zero minimum.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current snd_soc_read_signed() helper is only used from
snd_soc_get_volsw() and can be implemented more simply with
sign_extend. Remove snd_soc_read_signed() and add a new
soc_mixer_reg_to_ctl() helper. This new helper does not
include the reading of the register, but does include min and
max handling. This allows the helper to replace more of the
duplicated code and makes it easier to process the differences
between single, double register and double shift style controls.
It is worth noting this adds support for sign_bit into the _range
and sx callbacks and the invert option to sx callbacks.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the put handlers have identical code to verify the value passed
in from user-space. Factor this out into a single helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use GENMASK to make the masks for the various control helper functions.
Also factor out a shared helper function for the volsw and volsw_range
controls since the same code is appropriate for each. Note this does add
support for sign_bit into the volsw_range callbacks.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the comments for the xr_sx control helper functions to better
clarify the difference between these and the normal sx helpers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some basic kunit tests for some of the ASoC control put and get
helpers. This will assist in doing some refactoring. Note that presently
some tests fail, but the rest of the series will fix these up.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a reference count leak in slave_show() by properly putting the device
reference obtained from device_find_any_child().
Fixes: 6c364062bf ("spi: core: Add support for registering SPI slave controllers")
Fixes: c21b083798 ("spi: Use device_find_any_child() instead of custom approach")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250319032305.70340-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current I/O dispatch mechanism - queueing I/O by adding it to the
io_cmds list (and poking task_work as needed), then dispatching it in
ublk server task context by reversing io_cmds and completing the
io_uring command associated to each one - was introduced by commit
7d4a93176e ("ublk_drv: don't forward io commands in reserve order")
to ensure that the ublk server received I/O in the same order that the
block layer submitted it to ublk_drv. This mechanism was only needed for
the "raw" task_work submission mechanism, since the io_uring task work
wrapper maintains FIFO ordering (using quite a similar mechanism in
fact). The "raw" task_work submission mechanism is no longer supported
in ublk_drv as of commit 29dc5d0661 ("ublk: kill queuing request by
task_work_add"), so the explicit llist/reversal is no longer needed - it
just duplicates logic already present in the underlying io_uring APIs.
Remove it.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250318-ublk_io_cmds-v1-1-c1bb74798fef@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to AXP717 user manual, DCDC4 doesn't have a ramp delay like
DCDC1/2/3 do.
Remove it from the description and cleanup the macros.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250318205147.42850-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Writes for the error value of a connection are spinlock-protected inside
p9_conn_cancel, but lockless reads are present elsewhere to avoid
performing unnecessary work after an error has been met.
Mark the write and lockless reads to make KCSAN happy. Mark the write as
exclusive following the recommendation in "Lock-Protected Writes with
Lockless Reads" in tools/memory-model/Documentation/access-marking.txt
while we are at it.
Mark p9_fd_request and p9_conn_cancel m->err reads despite the fact that
they do not race with concurrent writes for stylistic reasons.
Reported-by: syzbot+d69a7cc8c683c2cb7506@syzkaller.appspotmail.com
Reported-by: syzbot+483d6c9b9231ea7e1851@syzkaller.appspotmail.com
Signed-off-by: Ignacio Encinas <ignacio@iencinas.com>
Message-ID: <20250318-p9_conn_err_benign_data_race-v3-1-290bb18335cc@iencinas.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Up until now we've been considering longer than requested replies as
acceptable, printing a message and just truncating the data,
but it makes more sense to consider these an error.
Make these fail with EIO instead.
Suggested-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20250317-p9_bogus_io_error-v1-1-9639f6d1561f@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
In p9_client_write() and p9_client_read_once(), if the server
incorrectly replies with success but a negative write/read count then we
would consider written (negative) <= rsize (positive) because both
variables were signed.
Make variables unsigned to avoid this problem.
The reproducer linked below now fails with the following error instead
of a null pointer deref:
9pnet: bogus RWRITE count (4294967295 > 3)
Reported-by: Robert Morris <rtm@mit.edu>
Closes: https://lore.kernel.org/16271.1734448631@26-5-164.dynamic.csail.mit.edu
Message-ID: <20250319-9p_unsigned_rw-v3-1-71327f1503d0@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zaamo/Zalrsc extensions for Guest/VM.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240619153913.867263-5-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Export the Zaamo and Zalrsc extensions to userspace using hwprobe.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240619153913.867263-4-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
These 2 new extensions are actually a subset of the A extension which
provides atomic memory operations and load-reserved/store-conditional
instructions.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240619153913.867263-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Merge the mmc fixes for v6.14-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add err_free_host label to properly pair mmc_alloc_host() with
mmc_free_host() in GPIO error paths. The allocated host memory was
leaked when GPIO lookups failed.
Fixes: e519f0bb64 ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318140226.19650-1-linmq006@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch cleans up the code in the __snd_echo_probe function of the
echoaudio.c driver by removing the unused variable i and moving the
declaration of the loop variable i inside the foor loops where it is
used
Signed-off-by: Andres Urian Florez <andres.emb.sys@gmail.com>
Link: https://patch.msgid.link/20250319020515.22150-1-andres.emb.sys@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have received reports about cards can become corrupt related to the
aggressive PM support. Let's make a partial revert of the change that
enabled the feature.
Reported-by: David Owens <daowens01@gmail.com>
Reported-by: Romain Naour <romain.naour@smile.fr>
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Fixes: 3edf588e7f ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20250312121712.1168007-1-ulf.hansson@linaro.org
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with UAPI headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is mostly a mechanical patch (done with a simple "sed -i"
statement), with some manual tweaks in <asm/frame.h>, <asm/hw_irq.h>
and <asm/setup.h> that mentioned this macro in comments with some
missing underscores.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314071013.1575167-38-thuth@redhat.com
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for UAPI headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com
According to:
https://gcc.gnu.org/onlinedocs/gcc/Size-of-an-asm.html
the usage of asm pseudo directives in the asm template can confuse
the compiler to wrongly estimate the size of the generated
code.
The LOCK_PREFIX macro expands to several asm pseudo directives, so
its usage in atomic locking insns causes instruction length estimates
to fail significantly (the specially instrumented compiler reports
the estimated length of these asm templates to be 6 instructions long).
This incorrect estimate further causes unoptimal inlining decisions,
un-optimal instruction scheduling and un-optimal code block alignments
for functions that use these locking primitives.
Use asm_inline instead:
https://gcc.gnu.org/pipermail/gcc-patches/2018-December/512349.html
which is a feature that makes GCC pretend some inline assembler code
is tiny (while it would think it is huge), instead of just asm.
For code size estimation, the size of the asm is then taken as
the minimum size of one instruction, ignoring how many instructions
compiler thinks it is.
bloat-o-meter reports the following code size increase
(x86_64 defconfig, gcc-14.2.1):
add/remove: 82/283 grow/shrink: 870/372 up/down: 76272/-43618 (32654)
Total: Before=22770320, After=22802974, chg +0.14%
with top grows (>500 bytes):
Function old new delta
----------------------------------------------------------------
copy_process 6465 10191 +3726
balance_dirty_pages_ratelimited_flags 237 2949 +2712
icl_plane_update_noarm 5800 7969 +2169
samsung_input_mapping 3375 5170 +1795
ext4_do_update_inode.isra - 1526 +1526
__schedule 2416 3472 +1056
__i915_vma_resource_unhold - 946 +946
sched_mm_cid_after_execve 175 1097 +922
__do_sys_membarrier - 862 +862
filemap_fault 2666 3462 +796
nl80211_send_wiphy 11185 11874 +689
samsung_input_mapping.cold 900 1500 +600
virtio_gpu_queue_fenced_ctrl_buffer 839 1410 +571
ilk_update_pipe_csc 1201 1735 +534
enable_step - 525 +525
icl_color_commit_noarm 1334 1847 +513
tg3_read_bc_ver - 501 +501
and top shrinks (>500 bytes):
Function old new delta
----------------------------------------------------------------
nl80211_send_iftype_data 580 - -580
samsung_gamepad_input_mapping.isra.cold 604 - -604
virtio_gpu_queue_ctrl_sgs 724 - -724
tg3_get_invariants 9218 8376 -842
__i915_vma_resource_unhold.part 899 - -899
ext4_mark_iloc_dirty 1735 106 -1629
samsung_gamepad_input_mapping.isra 2046 - -2046
icl_program_input_csc 2203 - -2203
copy_mm 2242 - -2242
balance_dirty_pages 2657 - -2657
These code size changes can be grouped into 4 groups:
a) some functions now include once-called functions in full or
in part. These are:
Function old new delta
----------------------------------------------------------------
copy_process 6465 10191 +3726
balance_dirty_pages_ratelimited_flags 237 2949 +2712
icl_plane_update_noarm 5800 7969 +2169
samsung_input_mapping 3375 5170 +1795
ext4_do_update_inode.isra - 1526 +1526
that now include:
Function old new delta
----------------------------------------------------------------
copy_mm 2242 - -2242
balance_dirty_pages 2657 - -2657
icl_program_input_csc 2203 - -2203
samsung_gamepad_input_mapping.isra 2046 - -2046
ext4_mark_iloc_dirty 1735 106 -1629
b) ISRA [interprocedural scalar replacement of aggregates,
interprocedural pass that removes unused function return values
(turning functions returning a value which is never used into void
functions) and removes unused function parameters. It can also
replace an aggregate parameter by a set of other parameters
representing part of the original, turning those passed by reference
into new ones which pass the value directly.]
Top grows and shrinks of this group are listed below:
Function old new delta
----------------------------------------------------------------
ext4_do_update_inode.isra - 1526 +1526
nfs4_begin_drain_session.isra - 249 +249
nfs4_end_drain_session.isra - 168 +168
__guc_action_register_multi_lrc_v70.isra 335 500 +165
__i915_gem_free_objects.isra - 144 +144
...
membarrier_register_private_expedited.isra 108 - -108
syncobj_eventfd_entry_func.isra 445 314 -131
__ext4_sb_bread_gfp.isra 140 - -140
class_preempt_notrace_destructor.isra 145 - -145
p9_fid_put.isra 151 - -151
__mm_cid_try_get.isra 238 - -238
membarrier_global_expedited.isra 294 - -294
mm_cid_get.isra 295 - -295
samsung_gamepad_input_mapping.isra.cold 604 - -604
samsung_gamepad_input_mapping.isra 2046 - -2046
c) different split points of hot/cold split that just move code around:
Top grows and shrinks of this group are listed below:
Function old new delta
----------------------------------------------------------------
samsung_input_mapping.cold 900 1500 +600
__i915_request_reset.cold 311 389 +78
nfs_update_inode.cold 77 153 +76
__do_sys_swapon.cold 404 455 +51
copy_process.cold - 45 +45
tg3_get_invariants.cold 73 115 +42
...
hibernate.cold 671 643 -28
copy_mm.cold 31 - -31
software_resume.cold 249 207 -42
io_poll_wake.cold 106 54 -52
samsung_gamepad_input_mapping.isra.cold 604 - -604
c) full inline of small functions with locking insn (~150 cases).
These bring in most of the code size increase because the removed
function code is now inlined in multiple places. E.g.:
0000000000a50e10 <release_devnum>:
a50e10: 48 63 07 movslq (%rdi),%rax
a50e13: 85 c0 test %eax,%eax
a50e15: 7e 10 jle a50e27 <release_devnum+0x17>
a50e17: 48 8b 4f 50 mov 0x50(%rdi),%rcx
a50e1b: f0 48 0f b3 41 50 lock btr %rax,0x50(%rcx)
a50e21: c7 07 ff ff ff ff movl $0xffffffff,(%rdi)
a50e27: e9 00 00 00 00 jmp a50e2c <release_devnum+0x1c>
a50e28: R_X86_64_PLT32 __x86_return_thunk-0x4
a50e2c: 0f 1f 40 00 nopl 0x0(%rax)
is now fully inlined into the caller function. This is desirable due
to the per function overhead of CPU bug mitigations like retpolines.
FTR a) with -Os (where generated code size really matters) x86_64
defconfig object file decreases by 24.388 kbytes, representing 0.1%
code size decrease:
text data bss dec hex filename
23883860 4617284 814212 29315356 1bf511c vmlinux-old.o
23859472 4615404 814212 29289088 1beea80 vmlinux-new.o
FTR b) clang recognizes "asm inline", but there was no difference in
code sizes:
text data bss dec hex filename
27577163 4503078 807732 32887973 1f5d4a5 vmlinux-clang-patched.o
27577181 4503078 807732 32887991 1f5d4b7 vmlinux-clang-unpatched.o
The performance impact of the patch was assessed by recompiling
fedora-41 6.13.5 kernel and running lmbench with old and new kernel.
The most noticeable improvements were:
Process fork+exit: 270.0952 microseconds
Process fork+execve: 2620.3333 microseconds
Process fork+/bin/sh -c: 6781.0000 microseconds
File /usr/tmp/XXX write bandwidth: 1780350 KB/sec
Pagefaults on /usr/tmp/XXX: 0.3875 microseconds
to:
Process fork+exit: 298.6842 microseconds
Process fork+execve: 1662.7500 microseconds
Process fork+/bin/sh -c: 2127.6667 microseconds
File /usr/tmp/XXX write bandwidth: 1950077 KB/sec
Pagefaults on /usr/tmp/XXX: 0.1958 microseconds
and from:
Socket bandwidth using localhost
0.000001 2.52 MB/sec
0.000064 163.02 MB/sec
0.000128 321.70 MB/sec
0.000256 630.06 MB/sec
0.000512 1207.07 MB/sec
0.001024 2004.06 MB/sec
0.001437 2475.43 MB/sec
10.000000 5817.34 MB/sec
Avg xfer: 3.2KB, 41.8KB in 1.2230 millisecs, 34.15 MB/sec
AF_UNIX sock stream bandwidth: 9850.01 MB/sec
Pipe bandwidth: 4631.28 MB/sec
to:
Socket bandwidth using localhost
0.000001 3.13 MB/sec
0.000064 187.08 MB/sec
0.000128 324.12 MB/sec
0.000256 618.51 MB/sec
0.000512 1137.13 MB/sec
0.001024 1962.95 MB/sec
0.001437 2458.27 MB/sec
10.000000 6168.08 MB/sec
Avg xfer: 3.2KB, 41.8KB in 1.0060 millisecs, 41.52 MB/sec
AF_UNIX sock stream bandwidth: 9921.68 MB/sec
Pipe bandwidth: 4649.96 MB/sec
[ mingo: Prettified the changelog a bit. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20250309170955.48919-1-ubizjak@gmail.com
Use asm_inline() to instruct the compiler that the size of asm()
is the minimum size of one instruction, ignoring how many instructions
the compiler thinks it is. ALTERNATIVE macro that expands to several
pseudo directives causes instruction length estimate to count
more than 20 instructions.
bloat-o-meter reports slight increase of the code size
for x86_64 defconfig object file, compiled with gcc-14.2:
add/remove: 0/2 grow/shrink: 3/0 up/down: 190/-59 (131)
Function old new delta
__copy_user_flushcache 166 247 +81
__memcpy_flushcache 369 437 +68
arch_wb_cache_pmem 6 47 +41
__pfx_clean_cache_range 16 - -16
clean_cache_range 43 - -43
Total: Before=22807167, After=22807298, chg +0.00%
The compiler now inlines and removes the clean_cache_range() function.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313102715.333142-2-ubizjak@gmail.com
Current minimum required version of binutils is 2.25,
which supports CLFLUSHOPT and CLWB instruction mnemonics.
Replace the byte-wise specification of CLFLUSHOPT and
CLWB with these proper mnemonics.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313102715.333142-1-ubizjak@gmail.com
Use asm_inline() to instruct the compiler that the size of asm()
is the minimum size of one instruction, ignoring how many instructions
the compiler thinks it is. ALTERNATIVE macro that expands to several
pseudo directives causes instruction length estimate to count
more than 20 instructions.
bloat-o-meter reports slight reduction of the code size
for x86_64 defconfig object file, compiled with gcc-14.2:
add/remove: 6/12 grow/shrink: 59/50 up/down: 3389/-3560 (-171)
Total: Before=22734393, After=22734222, chg -0.00%
where 29 instances of code blocks involving POPCNT now gets inlined,
resulting in the removal of several functions:
format_is_yuv_semiplanar.part.isra 41 - -41
cdclk_divider 69 - -69
intel_joiner_adjust_timings 140 - -140
nl80211_send_wowlan_tcp_caps 369 - -369
nl80211_send_iftype_data 579 - -579
__do_sys_pidfd_send_signal 809 - -809
One noticeable change is:
pcpu_page_first_chunk 1075 1060 -15
Where the compiler now inlines 4 more instances of POPCNT insns,
but still manages to compile to a function with smaller code size.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312123905.149298-3-ubizjak@gmail.com
Use ASM_CALL_CONSTRAINT to prevent inline asm() that includes call
instruction from being scheduled before the frame pointer gets set
up by the containing function. This unconstrained scheduling might
cause objtool to print a "call without frame pointer save/setup"
warning. Current versions of compilers don't seem to trigger this
condition, but without this constraint there's nothing to prevent
the compiler from scheduling the insn in front of frame creation.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312123905.149298-2-ubizjak@gmail.com