Commit graph

1,403,262 commits

Author SHA1 Message Date
Nicolin Chen
941d0719aa iommufd/selftest: Require vdev_id when attaching to a nested domain
When attaching a device to a vIOMMU-based nested domain, vdev_id must be
present. Add a piece of code hard-requesting it, preparing for a vEVENTQ
support in the following patch. Then, update the TEST_F.

A HWPT-based nested domain will return a NULL new_viommu, thus no such a
vDEVICE requirement.

Link: https://patch.msgid.link/r/4051ca8a819e51cb30de6b4fe9e4d94d956afe3d.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18 14:17:48 -03:00
Nicolin Chen
e8e1ef9b77 iommufd/viommu: Add iommufd_viommu_report_event helper
Similar to iommu_report_device_fault, this allows IOMMU drivers to report
vIOMMU events from threaded IRQ handlers to user space hypervisors.

Link: https://patch.msgid.link/r/44be825042c8255e75d0151b338ffd8ba0e4920b.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18 14:17:47 -03:00
Nicolin Chen
ea94b211c5 iommufd/viommu: Add iommufd_viommu_get_vdev_id helper
This is a reverse search v.s. iommufd_viommu_find_dev, as drivers may want
to convert a struct device pointer (physical) to its virtual device ID for
an event injection to the user space VM.

Again, this avoids exposing more core structures to the drivers, than the
iommufd_viommu alone.

Link: https://patch.msgid.link/r/18b8e8bc1b8104d43b205d21602c036fd0804e56.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18 14:17:47 -03:00
Nicolin Chen
e36ba5ab80 iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC
Introduce a new IOMMUFD_OBJ_VEVENTQ object for vIOMMU Event Queue that
provides user space (VMM) another FD to read the vIOMMU Events.

Allow a vIOMMU object to allocate vEVENTQs, with a condition that each
vIOMMU can only have one single vEVENTQ per type.

Add iommufd_veventq_alloc() with iommufd_veventq_ops for the new ioctl.

Link: https://patch.msgid.link/r/21acf0751dd5c93846935ee06f93b9c65eff5e04.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18 14:17:47 -03:00
Linus Torvalds
81e4f8d68c pmdomain providers:
- amlogic: Fix T7 ISP secpower
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmfZZUgXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCkg2RAAtNe31yxJDXXhw7OO13XmgEu1
 Gxq+8Ez+FcbDX6QUS5OOlog57lYSORCt1WaxJlnhZxPZS09K0pCRb/RYBUWXe64V
 tY3ySG66YvbKM1uTSZIwZnjJd/DHWU6Jl7RMZ1Nf1VD9B4Z8Y1tFjvCn1ASfdjwI
 zYL/xffMGcgarO8x2QHq416LSu8yBPgfN3t8qRX0MFEQbDkhPVaNNyR0M0xl/9xA
 NZQ7fiqG0hN4QwUCyru7ouWHvaojMFMdqCspozwcnOpmLpRIlrNbttq1ZpKd4om2
 u+O4U6rbUIzxhImf1w4KY7tTbQ+yEUKApb1CYuPKSitmT3qnBtq/CsADDVnuS1X2
 9ZQnTD2hX2tGEI9QBYoprLxXOoexV7IM57NxyTAzpJYuHI7bEFjq1mlvmgC2QOMM
 ItObGVStOcKrnxSZ9mN90a41Zqpy59Vbbf7/yhnQssFRrDDUeujkuiyr7Xw+ONMi
 pegmBnvhpv76kC/AWptVpb5qYT4w8RPWOJZV/Ii8ut5YVZV87NTXm6xF/UgYCDI/
 AW89LUVFnRbF12J+fdQdrTN+lCW01j+yynJHhGVIAEMquOhyiRfVP8v53zMZ8lQz
 s/ezwavgXPJJrAiiJEKybK9n9t901v06G6ipTmq55Bw8lUoli+E9obtMZpG4sWll
 7ydCVx8aUc0APf8CWVw=
 =/rtS
 -----END PGP SIGNATURE-----

Merge tag 'pmdomain-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

Pull pmdomain fix from Ulf Hansson:

 - Fix amlogic T7 ISP secpower

* tag 'pmdomain-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: amlogic: fix T7 ISP secpower
2025-03-18 09:58:12 -07:00
Emil Tantilov
680811c679 idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.

WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641]  unregister_netdev+0x1c/0x30
[ 3707.563656]  idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684]  idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712]  idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739]  idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769]  pci_device_remove+0xab/0x1e0
[ 3707.563786]  device_release_driver_internal+0x371/0x530
[ 3707.563803]  driver_detach+0xbf/0x180
[ 3707.563816]  bus_remove_driver+0x11b/0x2a0
[ 3707.563829]  pci_unregister_driver+0x2a/0x250

Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.

Add local variables for idx, vport_config and netdev for readability.

Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Suggested-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Mateusz Polchlopek
1388dd5641 ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()
Fix using the untrusted value of proto->raw.pkt_len in function
ice_vc_fdir_parse_raw() by verifying if it does not exceed the
VIRTCHNL_MAX_SIZE_RAW_PACKET value.

Fixes: 99f419df8a ("ice: enable FDIR filters from raw binary patterns for VFs")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Lukasz Czapnik
c5be6562de ice: fix input validation for virtchnl BW
Add missing validation of tc and queue id values sent by a VF in
ice_vc_cfg_q_bw().
Additionally fixed logged value in the warning message,
where max_tx_rate was incorrectly referenced instead of min_tx_rate.
Also correct error handling in this function by properly exiting
when invalid configuration is detected.

Fixes: 015307754a ("ice: Support VF queue rate limit and quanta size configuration")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Jan Glaza
e2f7d3f733 ice: validate queue quanta parameters to prevent OOB access
Add queue wraparound prevention in quanta configuration.
Ensure end_qid does not overflow by validating start_qid and num_queues.

Fixes: 015307754a ("ice: Support VF queue rate limit and quanta size configuration")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Jan Glaza
f91d0efcc3 ice: stop truncating queue ids when checking
Queue IDs can be up to 4096, fix invalid check to stop
truncating IDs to 8 bits.

Fixes: bf93bf791c ("ice: introduce ice_virtchnl.c and ice_virtchnl.h")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Jan Glaza
db5e8ea155 virtchnl: make proto and filter action count unsigned
The count field in virtchnl_proto_hdrs and virtchnl_filter_action_set
should never be negative while still being valid. Changing it from
int to u32 ensures proper handling of values in virtchnl messages in
driverrs and prevents unintended behavior.
In its current signed form, a negative count does not trigger
an error in ice driver but instead results in it being treated as 0.
This can lead to unexpected outcomes when processing messages.
By using u32, any invalid values will correctly trigger -EINVAL,
making error detection more robust.

Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:16 -07:00
Jesse Brandeburg
7fd71f3172 ice: fix reservation of resources for RDMA when disabled
If the CONFIG_INFINIBAND_IRDMA symbol is not enabled as a module or a
built-in, then don't let the driver reserve resources for RDMA. The result
of this change is a large savings in resources for older kernels, and a
cleaner driver configuration for the IRDMA=n case for old and new kernels.

Implement this by avoiding enabling the RDMA capability when scanning
hardware capabilities.

Note: Loading the out-of-tree irdma driver in connection to the in-kernel
ice driver, is not supported, and should not be attempted, especially when
disabling IRDMA in the kernel config.

Fixes: d25a0fc41c ("ice: Initialize RDMA support")
Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Acked-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:15 -07:00
Karol Kolacinski
53ce7166cb ice: ensure periodic output start time is in the future
On E800 series hardware, if the start time for a periodic output signal is
programmed into GLTSYN_TGT_H and GLTSYN_TGT_L registers, the hardware logic
locks up and the periodic output signal never starts. Any future attempt to
reprogram the clock function is futile as the hardware will not reset until
a power on.

The ice_ptp_cfg_perout function has logic to prevent this, as it checks if
the requested start time is in the past. If so, a new start time is
calculated by rounding up.

Since commit d755a7e129 ("ice: Cache perout/extts requests and check
flags"), the rounding is done to the nearest multiple of the clock period,
rather than to a full second. This is more accurate, since it ensures the
signal matches the user request precisely.

Unfortunately, there is a race condition with this rounding logic. If the
current time is close to the multiple of the period, we could calculate a
target time that is extremely soon. It takes time for the software to
program the registers, during which time this requested start time could
become a start time in the past. If that happens, the periodic output
signal will lock up.

For large enough periods, or for the logic prior to the mentioned commit,
this is unlikely. However, with the new logic rounding to the period and
with a small enough period, this becomes inevitable.

For example, attempting to enable a 10MHz signal requires a period of 100
nanoseconds. This means in the *best* case, we have 99 nanoseconds to
program the clock output. This is essentially impossible, and thus such a
small period practically guarantees that the clock output function will
lock up.

To fix this, add some slop to the clock time used to check if the start
time is in the past. Because it is not critical that output signals start
immediately, but it *is* critical that we do not brick the function, 0.5
seconds is selected. This does mean that any requested output will be
delayed by at least 0.5 seconds.

This slop is applied before rounding, so that we always round up to the
nearest multiple of the period that is at least 0.5 seconds in the future,
ensuring a minimum of 0.5 seconds to program the clock output registers.

Finally, to ensure that the hardware registers programming the clock output
complete in a timely manner, add a write flush to the end of
ice_ptp_write_perout. This ensures we don't risk any issue with PCIe
transaction batching.

Strictly speaking, this fixes a race condition all the way back at the
initial implementation of periodic output programming, as it is
theoretically possible to trigger this bug even on the old logic when
always rounding to a full second. However, the window is narrow, and the
code has been refactored heavily since then, making a direct backport not
apply cleanly.

Fixes: d755a7e129 ("ice: Cache perout/extts requests and check flags")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:15 -07:00
Przemek Kitszel
fa8eda1901 ice: health.c: fix compilation on gcc 7.5
GCC 7 is not as good as GCC 8+ in telling what is a compile-time
const, and thus could be used for static storage.
Fortunately keeping strings as const arrays is enough to make old
gcc happy.

Excerpt from the report:
My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0.

  CC [M]  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant
   ice_common_port_solutions, {ice_port_number_label}},
   ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution')
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant
   ice_common_port_solutions, {ice_port_number_label}},
                               ^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant
   "Change or replace the module or cable.", {ice_port_number_label}},
                                              ^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant
   ice_common_port_solutions, {ice_port_number_label}},
   ^~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 85d6164ec5 ("ice: add fw and port health reporters")
Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18 09:38:15 -07:00
Nayab Sayed
48a29721c9 dt-bindings: mtd: atmel,dataflash: convert txt to yaml
Convert atmel-dataflash.txt into atmel,dataflash.yaml

Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:19:13 +01:00
Zhang Heng
3081f26059 mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
Remove hard-coded strings by using the str_enable_disable() helper
function.

Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:18:51 +01:00
Zhang Heng
9fe1617df3 mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
Remove hard-coded strings by using the str_enabled_disabled() helper
function.

Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:18:51 +01:00
Andy Shevchenko
6bc9f42739 mtd: mtdpart: Do not supply NULL to printf()
GCC compiler is not happy about NULL being supplied as printf() parameter:

drivers/mtd/mtdpart.c:693:34: error: ‘%s’ directive argument is null [-Werror=format-overflow=]

Move the code after the parser test for NULL, and drop the ternary completely.
The user can deduct this since when it's not NULL two messages will be printed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:18:19 +01:00
Frank Li
b0e63a0847 dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
Add compatible string "fsl,imx8mp-gpmi-nand" and "fsl,imx8mq-gpmi-nand",
which back compatible with i.MX7D. So set these fall back to
"fsl,imx7d-gpmi-nand".

Add compatible string "fsl,imx8qm-gpmi-nand" and "fsl,imx8dxl-gpmi-nand",
which back compatible with i.MX8QXP. So set these fall back to
"fsl,imx8qxp-gpmi-nand".

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Han Xu <han.xu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:17:36 +01:00
Miquel Raynal
ca8cbbb2be mtd: nand: Fix a kdoc comment
The max_bad_eraseblocks_per_lun member of nand_device obviously
describes a number of *maximum* number of bad eraseblocks per LUN.

Fix this obvious typo.

Fixes: 377e517b5f ("mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg")
Cc: <stable+noautosel@kernel.org> # fix kdoc comment
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 17:15:39 +01:00
Stanley Chu
0430bf9bc1 i3c: master: svc: Fix missing STOP for master request
The controller driver nacked the master request but didn't emit a
STOP to end the transaction. The driver shall refuse the unsupported
requests and return the controller state to IDLE by emitting a STOP.

Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-03-18 17:14:35 +01:00
Stanley Chu
c06acf7143 i3c: master: svc: Use readsb helper for reading MDB
The target can send the MDB byte followed by additional data bytes.
The readl on MRDATAB reads one actual byte, but the readsl advances
the destination pointer by 4 bytes. This causes the subsequent payload
to be copied to wrong position in the destination buffer.

Cc: stable@kernel.org
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-03-18 17:14:35 +01:00
Stanley Chu
9cecad134d i3c: master: svc: Fix missing the IBI rules
The code does not add IBI rules for devices with controller capability.
However, the secondary controller has the controller capability and works
at target mode when the device is probed. Therefore, add IBI rules for
such devices.

Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-03-18 17:14:35 +01:00
Heiko Carstens
0dafe9968a s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
Use asm_inline for all inline assemblies which make use of the EX_TABLE or
ALTERNATIVE macros.

These macros expand to many lines and the compiler assumes the number of
lines within an inline assembly is the same as the number of instructions
within an inline assembly. This has an effect on inlining and loop
unrolling decisions.

In order to avoid incorrect assumptions use asm_inline, which tells the
compiler that an inline assembly has the smallest possible size.

In order to avoid confusion when asm_inline should be used or not, since a
couple of inline assemblies are quite large: the rule is to always use
asm_inline whenever the EX_TABLE or ALTERNATIVE macro is used. In specific
cases there may be reasons to not follow this guideline, but that should
be documented with the corresponding code.

Using the inline qualifier everywhere has only a small effect on the kernel
image size:

add/remove: 0/10 grow/shrink: 19/8 up/down: 1492/-1858 (-366)

The only location where this seems to matter is load_unaligned_zeropad()
from word-at-a-time.h where the compiler inlines more functions within the
dcache code, which is indeed code where performance matters.

Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:51 +01:00
Vasily Gorbik
caa3cd5ccd s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
Since commit d08d4e7cd6 ("s390/mm: use full 4KB page for 2KB PTE"),
there is no longer any reason to avoid splitting the kfence pool into
4k mappings in arch_kfence_init_pool(). Remove the architecture-specific
kfence_split_mapping().

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Vasily Gorbik
d93a855c31 s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
With recent ftrace changes, argument tracing has been added to the
function tracer. As a result, ftrace opportunistically reads the first
FTRACE_REGS_MAX_ARGS (i.e., 6) registers. On s390, only five arguments are
passed in registers, and the 6-th is read from the stack. If a function
has fewer than 6 arguments, the following KASAN report may be observed:

 BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xb0
 Read of size 8 at addr 00007f7fe066fdb8 by task swapper/31/0

 CPU: 31 UID: 0 PID: 0 Comm: swapper/31 Not tainted 6.14.0-rc4-00006-g76fe0337c219 #16
 Hardware name: IBM 3931 A01 704 (KVM/Linux)
 Call Trace:
  [<00007fffe0147224>] dump_stack_lvl+0x104/0x168
  [<00007fffe011381c>] print_address_description.constprop.0+0x34/0x338
  [<00007fffe0113b64>] print_report+0x44/0x138
  [<00007fffe0ad9422>] kasan_report+0xc2/0x180
  [<00007fffe0159ff8>] regs_get_kernel_stack_nth+0xa8/0xb0
  [<00007fffe05ebeda>] trace_function+0x23a/0x4d0
  [<00007fffe0615d32>] irqsoff_tracer_call+0xd2/0x110
  [<00007fffe2b4e34c>] ftrace_common+0x1c/0x40
  [<00007fffe0150826>] arch_cpu_idle_enter+0x6/0x10
  [<00007fffe035a1c8>] do_idle+0x168/0x2e0
  [<00007fffe035a9d0>] cpu_startup_entry+0x90/0xb0
  [<00007fffe017d25a>] smp_start_secondary+0x3da/0x4e0
  [<00007fffe2b4e20a>] restart_int_handler+0x72/0x88
 no locks held by swapper/31/0.

 The buggy address belongs to stack of task swapper/31/0
  and is located at offset 0 in frame:
  do_idle+0x0/0x2e0

 This frame has 1 object:
  [32, 40) '__mask'

 The buggy address belongs to the virtual mapping at
  [00007f7fe0660000, 00007f7fe0671000) created by:
  dup_task_struct+0x66/0x4e0

 The buggy address belongs to the physical page:
 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x80f23
 flags: 0x3ffff00000000000(node=0|zone=1|lastcpupid=0x1ffff)
 raw: 3ffff00000000000 0000000000000000 0000000000000122 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  00007f7fe066fc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00007f7fe066fd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >00007f7fe066fd80: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f3 f3 f3 00
                                         ^
  00007f7fe066fe00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00007f7fe066fe80: 00 f1 f1 f1 f1 00 f2 f2 f2 00 00 f3 f3 00 00 00

The function regs_get_kernel_stack_nth() verifies that the requested
argument is located on the stack, making it safe to read even if it is
not actually present. Make use of READ_ONCE_NOCHECK() helper to silence
KASAN reports in this case.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
WangYuli
0d5b0a4c81 s390/boot: Ignore vmlinux.map
When building with CONFIG_VMLINUX_MAP=y, a decompressor vmlinux.map file
is generated in the boot directory.

Add this file to .gitignore to ensure Git does not track it.

Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/F884C733016D6715+20250311030824.675683-1-wangyuli@uniontech.com
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Heiko Carstens
46ba4d0bfc s390/sysctl: Remove "vm/allocate_pgste" sysctl
Remove the not needed "vm/allocate_pgste" sysctl. It has no effect
anymore. However this is a user space visible change. It shouldn't cause
any problems, however if it does this needs to be partially reverted.

Note that some distributions set
vm/allocate_pgste=1

in one of the various sysctl configuration files. Besides a warning about
the (now) non-existent procfs file this doesn't cause any problems.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Heiko Carstens
174cb82a57 s390: Remove 2k vs 4k page table leftovers
Since commit d08d4e7cd6 ("s390/mm: use full 4KB page for 2KB PTE") always
4k page tables are allocated, however there is still some (now) obsolete
code left which deals with switching from 2k to 4k page tables for qemu/kvm
processes.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove the not needed code.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Heiko Carstens
9291ea091b s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
An mm has pgstes only after s390_enable_sie() has been called, while
mm_alloc_pgste() may be always true (e.g. via sysctl setting).

Limit the calls to gmap_unlink() in pte_free_tlb() to those cases
where there might be something to unlink.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Heiko Carstens
df4623fb53 s390/lowcore: Use lghi instead llilh to clear register
lghi is the fastest way to clear a register. Use that intead of llilh.

Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:05 +01:00
Heiko Carstens
a0f2a8d051 s390/syscall: Merge __do_syscall() and do_syscall()
The compiler inlines do_syscall() into __do_syscall(). Therefore do this in
C code as well, since this makes the code easier to understand.

Also adjust and add various unlikely() and likely() annotations.

Furthermore this allows to replace the separate exit_to_user_mode() and
syscall_exit_to_user_mode_work() calls with a combined
syscall_exit_to_user_mode() call which results in slightly better code.

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
Heiko Carstens
b46525437e s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
Implement SPINLOCK_LOCKVAL with an inline assembly, which makes use of the
ALTERNATIVE macro, to read spinlock_lockval from lowcore. Provide an
alternative instruction with a different offset in case lowcore is
relocated.

This replaces sequences of two instructions with one instruction.

Before:
  10602a:       a7 78 00 00             lhi     %r7,0
  10602e:       a5 8e 00 00             llilh   %r8,0
  106032:       58 d0 83 ac             l       %r13,940(%r8)
  106036:       ba 7d b5 80             cs      %r7,%r13,1408(%r11)

After:
  10602a:       a7 88 00 00             lhi     %r8,0
  10602e:       e3 70 03 ac 00 58       ly      %r7,940
  106034:       ba 87 b5 80             cs      %r8,%r7,1408(%r11)

Kernel image size change:
add/remove: 756/750 grow/shrink: 646/3435 up/down: 30778/-46326 (-15548)

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
Heiko Carstens
4797e9b506 s390/smp: Implement raw_smp_processor_id() with inline assembly
Implement raw_smp_processor_id() with an inline assembly, which makes
use of the ALTERNATIVE macro, to read cpu_nr from lowcore. Provide an
alternative instruction with a different offset in case lowcore is
relocated.

This replaces sequences of two instructions with one instruction.

Before:
  1000b6:       a5 1e 00 00             llilh   %r1,0
  1000ba:       58 20 13 a0             l       %r2,928(%r1)

After:
  1000b6:       e3 20 03 a0 00 58       ly      %r2,928

Kernel image size change:
add/remove: 753/755 grow/shrink: 230/1510 up/down: 30538/-35832 (-5294)

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
Heiko Carstens
65c07e91cc s390/current: Implement current with inline assembly
Implement current with an inline assembly, which makes use of the
ALTERNATIVE macro, to read current from lowcore. Provide an alternative
instruction with a different offset in case lowcore is relocated.

This replaces sequences of two instructions with one instruction.

Before:
 100076:       a5 1e 00 00             llilh   %r1,0
 10007a:       e3 40 13 40 00 04       lg      %r4,832(%r1)

After:
 100076:       e3 10 03 40 00 04       lg      %r1,832

Kernel image size change:
add/remove: 3/17 grow/shrink: 166/2204 up/down: 7122/-24594 (-17472)

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
Heiko Carstens
430693c836 s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
Use asm_inline to let the compiler know that the get_lowcore() inline
assembly has the smallest possible size. The ALTERNATIVE construct is used
to generate a single instruction, however the macro expands to multiple
lines. GCC uses the number of lines of an inline assembly to count the
number of instructions within an inline assembly, which then has an effect
on inlining decisions.

In order to avoid incorrect assumptions use asm_inline. The result is that
more functions are inlined, which results in a small growth of the kernel
image:

add/remove: 59/480 grow/shrink: 854/647 up/down: 168780/-162394 (6386)

Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
joel granados
20de8f8d31 s390: Move s390 sysctls into their own file under arch/s390
Move s390 sysctls (spin_retry and userprocess_debug) into their own
files under arch/s390. Create two new sysctl tables
(2390_{fault,spin}_sysctl_table) which will be initialized with
arch_initcall placing them after their original place in proc_root_init.

This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.

Signed-off-by: joel granados <joel.granados@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250306-jag-mv_ctltables-v2-6-71b243c8d3f8@kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-18 17:13:04 +01:00
Miquel Raynal
b28f47ac3d mtd: spinand: Improve spinand_info macros style
Let's assume all these macros should not have a trailing comma, this way
the caller can use a more formal and usual C writing style, as reflected
in the Macronix driver.

Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-18 16:56:02 +01:00
Heming Zhao
03d2b62208 dlm: make tcp still work in multi-link env
This patch bypasses multi-link errors in TCP mode, allowing dlm
to operate on the first tcp link.

Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2025-03-18 10:49:22 -05:00
Mark Brown
88f2009559
ASoC: codecs: Add aw88166 amplifier driver
Merge series from wangweidong.a@awinic.com:

Add the awinic,aw88166 property to support the aw88166 chip.

The driver is for amplifiers aw88166 of Awinic Technology
Corporation. The AW88166 is a high efficiency digital
Smart K audio amplifier
2025-03-18 15:34:37 +00:00
Mark Brown
4103337f3c
add sof support on imx95
Merge series from Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>:

Add sof support on imx95. This series also includes some changes to
the audio-graph-card2 binding required for the support.
2025-03-18 15:34:33 +00:00
Mark Brown
b7a253db0a
ASoC: Intel: avs: Replace devm_kzalloc() with
Merge series from Ethan Carter Edwards <ethan@ethancedwards.com>:

Open coded arithmetic in allocator arguments is discouraged. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred. Not
only for readability purposes but safety purposes.

The changes move `devm_kzalloc(dev, sizeof(var) * n, GFP_KERNEL)` to
the helper function `devm_kcalloc(dev, n, sizeof(var), GFP_KERNEL)`.

Here is a series of four patches within the Intel/avs drivers that make
these changes. They are all compile tested only but should have no
effect on runtime behaviour.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
2025-03-18 15:34:29 +00:00
Andrei Lalaev
bf1bb26f23 hwmon: add driver for HTU31
Add base support for HTU31 temperature and humidity sensor.

Besides temperature and humidity values, the driver also exports a 24-bit
heater control to sysfs and serial number to debugfs.

Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Link: https://lore.kernel.org/r/20250217051110.46827-2-andrey.lalaev@gmail.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-18 08:03:40 -07:00
Andrei Lalaev
fb36a0b339 dt-bindings: hwmon: Add description for sensor HTU31
Add trivial binding for HTU31 Temperature and Humidity sensor.

Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250217051110.46827-3-andrey.lalaev@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-18 08:03:40 -07:00
Leo Yang
b64b6cb163 hwmon: Add driver for TI INA233 Current and Power Monitor
Driver for Texas Instruments INA233 Current and Power Monitor
With I2C-, SMBus-, and PMBus-Compatible Interface

Signed-off-by: Leo Yang <leo.yang.sy0@gmail.com>
Link: https://lore.kernel.org/r/20250116085939.1235598-3-leo.yang.sy0@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-18 08:03:37 -07:00
Paolo Abeni
23c9ff6591 Merge branch 'net-stmmac-remove-unnecessary-of_get_phy_mode-calls'
Russell King says:

====================
net: stmmac: remove unnecessary of_get_phy_mode() calls

This series removes unnecessary of_get_phy_mode() calls from the stmmac
glue drivers. stmmac_probe_config_dt() / devm_stmmac_probe_config_dt()
already gets the interface mode using device_get_phy_mode() and stores
it in plat_dat->phy_interface.

Therefore, glue drivers using of_get_phy_mode() are just duplicating
the work that has already been done.

This series adjusts the glue drivers to remove their usage of
of_get_phy_mode().
====================

Link: https://patch.msgid.link/Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 15:53:18 +01:00
Russell King (Oracle)
00d2c3c071 net: stmmac: sunxi: remove of_get_phy_mode()
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

Set gmac->interface from plat_dat->phy_interface.

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGx-005v0F-Ev@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 15:53:16 +01:00
Russell King (Oracle)
3d9e9dfce0 net: stmmac: sun8i: remove of_get_phy_mode()
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 15:53:15 +01:00
Russell King (Oracle)
3e2858bb3f net: stmmac: sti: remove of_get_phy_mode()
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

Pass plat_dat into sti_dwmac_parse_data(), and set dwmac->interface
from plat_dat->phy_interface.

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGn-005v02-7G@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 15:53:15 +01:00
Russell King (Oracle)
9886718ad1 net: stmmac: rk: remove of_get_phy_mode()
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

Set bsp_priv->phy_iface from plat->phy_interface.

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGi-005uzx-3p@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 15:53:15 +01:00