In order to make pin-init a standalone crate, remove dependencies on
kernel-specific code such as `ScopeGuard` and `KBox`.
`ScopeGuard` is only used in the `[pin_]init_array_from_fn` functions
and can easily be replaced by a primitive construct.
`KBox` is only used for type variance of unsized types and can also
easily be replaced.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-13-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Before switching to compile the `pin-init` crate directly, change
any links that would be invalid to links that are valid both before and
after the switch.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-12-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When making pin-init its own crate, `Zeroable` will no longer be defined
by the kernel crate and thus implementing it for `Option<Box<T, A>>` is
no longer possible due to the orphan rule.
For this reason introduce a new `ZeroableOption` trait that circumvents
this problem.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-11-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. Since `Opaque<T>` and `KBox<T>` are part
of the kernel, move their `Zeroable` implementation into the kernel
crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-10-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. This includes the `InPlaceInit<T>`
trait, its implementations and the implementations of `InPlaceWrite` for
`Arc` and `UniqueArc`. All of these use the kernel's error type which
will become unavailable in pin-init.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-9-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Move the ability to just write `try_pin_init!(Foo { a <- a_init })`
(note the missing `? Error` at the end) into the kernel crate.
Remove this notation from the pin-init crate, since the default when no
error is specified is the kernel-internal `Error` type. Instead add two
macros in the kernel crate that serve this default and are used instead
of the ones from `pin-init`.
This is done, because the `Error` type that is used as the default is
from the kernel crate and it thus prevents making the pin-init crate
standalone.
In order to not cause a build error due to a name overlap, the macros in
the pin-init crate are renamed, but this change is reverted in a future
commit when it is a standalone crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-8-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `[pin_]init!` macros have the same behavior as the `try_[pin_]init!`
macros, except that they set the error type to `Infallible`.
Instead of calling the primitive `__init_internal!` with the correct
parameters, the same can thus be achieved by calling `try_[pin_]init!`.
Since this makes it more clear what their behavior is, simplify the
implementations of `[pin_]init!`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-7-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace the examples in the documentation by the ones from the
user-space version and introduce the standalone examples from the
user-space version such as the `CMutex<T>` type.
The `CMutex<T>` example from the pinned-init repository [1] is used in
several documentation examples in the user-space version instead of the
kernel `Mutex<T>` type (as it's not available). In order to split off
the pin-init crate, all examples need to be free of kernel-specific
types.
Link: https://github.com/rust-for-Linux/pinned-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-6-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Move the documentation of proc-macros from pin-init-internal into
pin-init. This is because documentation can only reference types from
dependencies and pin-init-internal cannot have pin-init as a dependency,
as that would be cyclic.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-5-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all kernel-specific documentation from pin-init back into
the kernel crate.
Also include an example from the user-space version [1] adapted to the
kernel.
The new `init.rs` file will also be populated by kernel-specific
extensions to the pin-init crate by the next commits.
Link: c1417c64c7/src/lib.rs (L161) [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-4-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all pin-init API code (including proc-macros) into
`rust/pin-init`.
Moved modules have their import path adjusted via the `#[path = "..."]`
attribute. This allows the files to still be imported in the kernel
crate even though the files are in different directories.
Code that is moved out of files (but the file itself stays where it is)
is imported via the `include!` macro. This also allows the code to be
moved while still being part of the kernel crate.
Note that this commit moves the generics parsing code out of the GPL-2.0
file `rust/macros/helpers.rs` into the Apache-2.0 OR MIT file
`rust/pin_init/internal/src/helpers.rs`. I am the sole author of that
code and it already is available with that license at [1].
The same is true for the entry-points of the proc-macros `pin_data`,
`pinned_drop` and `derive_zeroable` in `rust/macros/lib.rs` that are
moved to `rust/pin_data/internal/src/lib.rs`. Although there are some
smaller patches that fix the doctests.
Link: https://github.com/Rust-for-Linux/pinned-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The build system cannot handle doctests in the kernel crate in files
outside of `rust/kernel/`. Subsequent commits will move files out of
that directory, but will still compile them as part of the kernel crate.
Thus ignore all doctests in the to-be-moved files.
Leave tests disabled until they are separated into their own crate and
they stop causing breakage.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Extend the Result documentation by some guidelines and examples how
to handle Result error cases gracefully. And how to not handle them.
While at it fix one missing `Result` link in the existing documentation.
[ Moved links out-of-line for improved readability. Fixed `srctree`
link. Sorted out-of-line links. Added newlines for consistency
with other docs. Applied paragraph break suggestion. Reworded
slightly the docs in a couple places. Added Markdown.
In addition, added `#[allow(clippy::single_match)` for the first
example. It cannot be an `expect` since due to a difference introduced
in Rust 1.85.0 when there are comments in the arms of the `match`.
Reported it upstream, but it was intended:
https://github.com/rust-lang/rust-clippy/issues/14418
Perhaps Clippy will lint about it in the future, but without autofix:
https://github.com/rust-lang/rust-clippy/pull/14420
- Miguel ]
Link: https://lore.kernel.org/rust-for-linux/CANiq72keOdXy0LFKk9SzYWwSjiD710v=hQO4xi+5E4xNALa6cA@mail.gmail.com/
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250122054719.595878-1-dirk.behme@de.bosch.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tracing instances have a ref count to keep them around while files within
their directories are open. This prevents them from being deleted while
they are used. The histogram code had some files that needed to take the
ref count and that was added, but the error paths did not decrement the
ref counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ9cE8hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtm8AQDrdfwo63g/K0xpM0Uej9Ex5pBkHEq/
WwCI2hUbPya0wAEAtEcfvgt7P0GuO0PNOYY3uzhAokfBiN04elatbLEetQ4=
=i35g
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
It's possible for checksum errors to be transient - e.g. flakey
controller or cable, thus we need additional retries (besides retrying
from different replicas) before we can definitely return an error.
This is particularly important for the next patch, which will allow the
data move path to move extents with checksum errors - we don't want to
accidentally introduce bitrot due to a transient error!
- bch2_bkey_pick_read_device() is substantially reworked, and
bch2_dev_io_failures is expanded to record more information about the
type of failure (i.e. number of checksum errors).
It now returns an error code that describes more precisely the reason
for the failure - checksum error, io error, or offline device, instead
of the previous generic "insufficient devices". This is important for
the next patches that add poisoning, as we only want to poison extents
when we've got real checksum errors (or perhaps IO errors?) - not
because a device was offline.
- Add a new option and superblock field for the number of checksum
retries.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Users have been asking for this, and now that errors are returned to the
top level read retry path - we can.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Next patch will be adding an additional retry loop for checksum errors,
so that we can rule out transient errors before marking an extent as
poisoned.
Prerequisite to this is returning errors to bch2_rbio_retry(); this will
also let us add a "successful retry" message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that the read path uses proper error codes, we can get rid of the
weird rbio->hole signalling to the move path that the read didn't
happen.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we do a read to a buffer that's mapped into userspace, it's
possible to get a spurious checksum error if userspace was modified the
buffer at the same time.
When we retry those, they have to be bounced before we know definitively
whether we're reading corrupt data.
But the retry path propagates read flags differently, so needs special
handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kill the READ_ERR/READ_RETRY/READ_RETRY_AVOID enums, and add standard
error codes that describe precisely which error occured.
This is going to be used for the data move path, to move but poison
extents with checksum errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
dm-flakey is busted, and this is simpler anyways - this lets us test the
checksum error retry ptahs
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These are commonly needed when debugging, and saves from having to ask
users to dig.
Also, rebalance_status now includes pending rebalance work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no need to record "." dirents in the directory data (while
they could be used for sanity checks, they aren't very useful.)
Omitting "." dirents also improves directory data deduplication.
Use a per-inode (instead of per-sb) flag to indicate if the "." dirent
is omitted or not, ensuring compatibility with incremental builds. It
also reuses EROFS_I_NLINK_1_BIT, as it has very limited use cases for
directories with `nlink = 1`.
Emit the "." entry as the last virtual dirent in the directory because
it is _much_ less frequently used than the ".." dirent. It also keeps
`f_pos` meaningful, as it strictly follows the directory data when it's
less than i_size.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-6-hsiangkao@linux.alibaba.com
It adapts the on-disk changes from the previous commit. It also
supports EROFS_NULL_ADDR (all 1's) for EROFS_INODE_FLAT_PLAIN inodes
to indicate 0-filled inodes, as it's common for composefs use cases.
As a result, EROFS_INODE_CHUNK_BASED is no longer needed.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-5-hsiangkao@linux.alibaba.com
The current 32-bit block addressing limits EROFS to a 16TiB maximum
volume size with 4KiB blocks. However, several new use cases now
require larger capacity support:
- Massive datasets for model training in order to boost random
sampling performance for each epoch;
- Object storage clients using EROFS direct passthrough.
This extends core on-disk structures to support 48-bit block addressing,
such as inodes, device slots, and inode chunks.
Additionally:
- Expand superblock root NID to 8-byte `rootnid_8b` to enable full
out-of-place update incremental builds;
- Introduce `epoch` field in the superblock as well as add `mtime`
field to 32-byte compact inodes for basic timestamp support.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-4-hsiangkao@linux.alibaba.com
- Switch to on-stack `copied` since it's just 64 bytes;
- Get rid of `nblks` and derive `i_blocks` directly;
- Use `inode_set_mtime()` instead of `inode_set_ctime()`
to follow the ondisk naming;
- Rearrange the code.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-3-hsiangkao@linux.alibaba.com
It seems that all compressors need those two values, so just move
them into the common structure.
`struct z_erofs_lz4_decompress_ctx` can be dropped too.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250305124007.1810731-1-hsiangkao@linux.alibaba.com
Simplify the logic in z_erofs_fill_inode_lazy() by combining the
handling of ztailpacking and fragments, as they are mutually exclusive.
Note that `h->h_clusterbits >> Z_EROFS_FRAGMENT_INODE_BIT` is handled
above, so no need to duplicate the check.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250224123747.1387122-2-hsiangkao@linux.alibaba.com
Use `z_idata_size != 0` to indicate that ztailpacking is enabled.
`Z_EROFS_ADVISE_INLINE_PCLUSTER` cannot be ignored, as `h_idata_size`
could be non-zero prior to erofs-utils 1.6 [1].
Additionally, merge `z_idataoff` and `z_fragmentoff` since these two
features are mutually exclusive for a given inode.
[1] https://git.kernel.org/xiang/erofs-utils/c/547bea3cb71a
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250225114038.3259726-1-hsiangkao@linux.alibaba.com
Actually, volume name doesn't need to include the NIL terminator if
the string length matches the on-disk field size as mentioned in [1].
I tend to relax it together with the upcoming 48-bit block addressing
(or stable kernels which backport this fix) so that we could have a
chance to record a 16-byte volume name like ext4.
Since in-memory `volume_name` has no user, just get rid of the unneeded
check for now. `sbi->uuid` is useless and avoid it too.
[1] https://lore.kernel.org/r/96efe46b-dcce-4490-bba1-a0b00932d1cc@linux.alibaba.com
Fixes: a64d9493f5 ("staging: erofs: refuse to mount images with malformed volume name")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250225033934.2542635-1-hsiangkao@linux.alibaba.com
Since EROFS_KMAP_ATOMIC is no longer valid, get rid of erofs_kmap_type too.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250217093141.2659-1-liubo03@inspur.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
There's no need to enumerate each type. No logic changes.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250210032923.3382136-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
rk3562 has 1 naneng comboPHY used for PCIe and USB3.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250227110836.2343158-2-kever.yang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
rk3562 use the same Naneng Combo Phy driver as rk3568.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227110836.2343158-1-kever.yang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add driver for the MIPI D-/C-PHY block based around a Samsung IP-block
that is for example needed to drive a MIPI DSI output on rk3588.
Right now only the D-PHY portion is implemented, with the C-PHY part
needing separate work.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20250313134035.278133-3-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Correct the indentation in an example within the `modules.rst` file
to improve readability.
Signed-off-by: Kefan Liu <liukefan24s@ict.ac.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of generating the vmlinux.relocs file (needed by the
decompressor build to construct the KASLR relocation tables) as a
vmlinux postlink step, which is dubious because it depends on data that
is stripped from vmlinux before the build completes, generate it from
vmlinux.unstripped, which has been introduced specifically for this
purpose.
This ensures that each artifact is rebuilt as needed, rather than as a
side effect of another build rule.
This effectively reverts commit
9d9173e9ce ("x86/build: Avoid relocation information in final vmlinux")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The imperative paradigm used to build vmlinux, extract some info from it
or perform some checks on it, and subsequently modify it again goes
against the declarative paradigm that is usually employed for defining
make rules.
In particular, the Makefile.postlink files that consume their input via
an output rule result in some dodgy logic in the decompressor makefiles
for RISC-V and x86, given that the vmlinux.relocs input file needed to
generate the arch-specific relocation tables may not exist or be out of
date, but cannot be constructed using the ordinary Make dependency based
rules, because the info needs to be extracted while vmlinux is in its
ephemeral, non-stripped form.
So instead, for architectures that require the static relocations that
are emitted into vmlinux when passing --emit-relocs to the linker, and
are subsequently stripped out again, introduce an intermediate vmlinux
target called vmlinux.unstripped, and organize the reset of the build
logic accordingly:
- vmlinux.unstripped is created only once, and not updated again
- build rules under arch/*/boot can depend on vmlinux.unstripped without
running the risk of the data disappearing or being out of date
- the final vmlinux generated by the build is not bloated with static
relocations that are never needed again after the build completes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some architectures build vmlinux with static relocations preserved, but
strip them again from the final vmlinux image. Arch specific tools
consume these static relocations in order to construct relocation tables
for KASLR.
The fact that vmlinux is created, consumed and subsequently updated goes
against the typical, declarative paradigm used by Make, which is based
on rules and dependencies. So as a first step towards cleaning this up,
introduce a Kconfig symbol to declare that the arch wants to consume the
static relocations emitted into vmlinux. This will be wired up further
in subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to introduce an intermediate, non-stripped vmlinux build that
can be used by other build steps as an input, pass the output file name
to link-vmlinux.sh via its command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In talking it over with Rafael and Danilo, it makes more sense for
everyone to be a maintainer here, to share the load where possible.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025031634-playing-lark-95f9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>