Factor out get_iter_to_node() and use it for
btree_node_rewrite_get_iter(), to be used for fixing btree node write
error behaviour.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- change an assertion to an ERO that a user hit doing the 6.14 upgrade
- fix 32 bit build breakage
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmfUw1UACgkQE6szbY3K
bnY+WQ//QZ4gs78eipqCa3cpmYsjMFaNsBh+s+DbX5vYU1mrRwPMRfrsXEN26fjx
G5eVFdCix/0rFuLWHpJzehQxMWeicpgP7WLN6WM/eKSIkZWlyR7xQj+xzGRSmMWp
3ZIb4qh3XzJvJyl3aXD0VW5P5a4+HEWTDdsmFivPtCmPg1yrLPZrdoc0siIJsXMD
ZGRrH2ngapVYbCRIQ3+jemEwJ2NeA6/kaP64J9DhVi4w24OjBFhheJ4DFTpntgQj
onE0tWTr762rQXE0zkoPDMJ7ESu8Uag7AISU6bwO4ZJP+oH7o+Ws40LYY326c+Ng
jWnjjDD2AGFTMEA35sf9mTUVyyZVaGWJ5eYm2hzt0JkUhW3j/rserGCPmMqwo4k8
NSaIAA1BgfUBXokY996VafygX6AhDjuEYIT3umeAH3avifejrKeNfmMwSQWyZF2w
Pe2teHftbyflsbplUg27bPLaiiRD2mQKMopBXl5j2zjy0/YWAjoloMF21JWwotjQ
f1YFzjaO6CrIoRfFWB/RQXKKRS0hUaTccLdw9q6KfWT3GPKdpYEZNngo6NWd74fm
XIGUNgKBbdPKUCBXEoaFsrZ1D8Hr39oBTtoMrvADb/RV9q0RDBBaCmZzdlfbcNoO
ka78Z297nJl98tXE44njxWItO11Syn+3f2xt33KnySKyng7kXsw=
=dNgK
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-03-14.2' of git://evilpiepirate.org/bcachefs
Pull another bcachefs hotfix from Kent Overstreet:
- fix 32 bit build breakage
* tag 'bcachefs-2025-03-14.2' of git://evilpiepirate.org/bcachefs:
bcachefs: fix build on 32 bit in get_random_u64_below()
bcachefs removed most PAGE_SIZE references long ago, so this is easy;
only readpage_bio_extend() has to be tweaked to respect the minimum
order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bare 64 bit divides not allowed, whoops
arm-linux-gnueabi-ld: drivers/char/random.o: in function `__get_random_u64_below':
drivers/char/random.c:602:(.text+0xc70): undefined reference to `__aeabi_uldivmod'
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When enabling the tracepoint at loading module, the target module
refcount is incremented by find_tracepoint_in_module(). But it is
unnecessary because the module is not unloaded while processing
module loading callbacks.
Moreover, the refcount is not decremented in that function.
To be clear the module refcount handling, move the try_module_get()
callsite to trace_fprobe_create_internal(), where it is actually
required.
Link: https://lore.kernel.org/all/174182761071.83274.18334217580449925882.stgit@devnote2/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
When unloading module, the tprobe events are not correctly cleaned
up. Thus it becomes `fprobe-event` and never be enabled again even
if loading the same module again.
For example;
# cd /sys/kernel/tracing
# modprobe trace_events_sample
# echo 't:my_tprobe foo_bar' >> dynamic_events
# cat dynamic_events
t:tracepoints/my_tprobe foo_bar
# rmmod trace_events_sample
# cat dynamic_events
f:tracepoints/my_tprobe foo_bar
As you can see, the second time my_tprobe starts with 'f' instead
of 't'.
This unregisters the fprobe and tracepoint callback when module is
unloaded but marks the fprobe-event is tprobe-event.
Link: https://lore.kernel.org/all/174158724946.189309.15826571379395619524.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Extended Linear Cache (ELC) setup code emits a dev_warn(), "Extended
linear cache calculation failed." for issues found while setting up
the ELC.
For platforms without CONFIG_ACPI_HMAT, every auto region setup will
emit the warning because the default !ACPI_HMAT return value is
EOPNOTSUPP. Suppress it by skipping the warn for EOPNOTSUPP. Change
the EOPNOTSUPP in the actual ELC failure path to ENXIO.
Remove the check and enusing dev_warn() when region resource size is
NULL. The endpoint decoders hpa_range used to create the resource is
checked in init_hdm_decoder(), so it cannot be NULL here.
For good measure, add the rc value to the dev_warn(). It will either
be the -ENOENT returned by HMAT if the mem target is not found, or
the -ENXIO from the region driver calculation.
Reviewed-by: Li Ming <ming.li@zohomail.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250306213700.2606304-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 188e9529a6 ("cxl: Remove the CXL_DECODER_MIXED mistake")
removed the mixed mode.
Remove it from the sysfs documentation.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250224-remove-mixed-sysfs-v1-1-a329db313dac@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported by kernel test bot from an ARM build:
drivers/cxl/core/region.c:3263:26: warning: format '%lld' expects argument of type 'long long int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
On a 32bit system, resource_size_t is defined as 32bit long vs on a 64bit
system it is defined as 64bit long. Use %pa format to deal with
resource_size_t.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503010252.mIDhZ5kY-lkp@intel.com/
Fixes: 0ec9849b63 ("acpi/hmat / cxl: Add extended linear cache support for CXL")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250228204739.3849309-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL unit test cxl-xor-region.sh is skipping a 1+1+1 region
interleave test case because the window is not defined.
Additionally, upcoming expansion of 3 way HB interleave test cases
(like 2+2+2) require the same window.
Replace an unused CFMWS with a 3-way capable CFMWS in the set of
CFMWS's loaded when interleave_arithmetic=1.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20250226221931.2352061-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CONFIG_CXL_MCE depends on CONFIG_MEMORY_FAILURE, if
CONFIG_CXL_MCE is not set, devm_cxl_register_mce_notifier() will return
an -EOPNOTSUPP, it will cause cxl_mem_state_create() failure , and then
cxl pci device probing failed. In this case, it should not break cxl pci
device probing.
Add a checking in cxl_mem_state_create() to check if the returned value
of devm_cxl_register_mce_notifier() is -EOPNOTSUPP, if yes, just output
a warning log, do not let cxl_mem_state_create() return an error.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250227101848.388595-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCZ9QpngAKCRBcsMJ8RxYu
Y69DAX9khbIzgfgPK2inzc/sgWbkJmR0HCTQ8tTdE4WzC2e86qAEcDohFV0hLowa
100XU2EBfje1gouO5qtDlrdh/Lj89XIk19Rox+NjwKXh/UcLx5m166KuQE6b9Ef3
h3m3Gicm2g==
=bUgw
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.14-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanup from Carlos Maiolino:
"Use abs_diff instead of XFS_ABSDIFF"
* tag 'xfs-fixes-6.14-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Use abs_diff instead of XFS_ABSDIFF
Instead of creating and initializing _all_ hyp vcpus in pKVM when
the first host vcpu runs for the first time, initialize _each_
hyp vcpu in conjunction with its corresponding host vcpu.
Some of the host vcpu state (e.g., system registers and traps
values) is not initialized until the first time the host vcpu is
run. Therefore, initializing a hyp vcpu before its corresponding
host vcpu has run for the first time might not view the complete
host state of these vcpus.
Additionally, this behavior is inline with non-protected modes.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Move the code that creates and initializes the hyp view of a vcpu
in pKVM to its own function. This is meant to make the transition
to initializing every vcpu individually clearer.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-4-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There's only a single user of of_prop_val_eq(), so move it to overlay.c.
This removes one case of exposing struct property outside of the DT
code.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250312212947.1067337-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use the typed of_property_* functions rather than of_get_property()
which leaks pointers to DT data without any control of the lifetime.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250312212937.1067088-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Initialize and set the traps controlled by the HCRX_EL2 in pKVM.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-3-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Factor out the code for setting a vcpu's HCRX_EL2 traps in to a
separate inline function. This allows us to share the logic with
pKVM when setting the traps in protected mode.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add support to emulate the CXL Set Shutdown State operation.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-5-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Similar to how the acpi_nfit driver exports Optane dirty shutdown count,
introduce:
/sys/bus/cxl/devices/nvdimm-bridge0/ndbusX/nmemY/cxl/dirty_shutdown
Under the conditions that 1) dirty shutdown can be set, 2) Device GPF
DVSEC exists, and 3) the count itself can be retrieved.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-4-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
... to a better suited 'cxl_arm_dirty_shutdown()'.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-3-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a helper to fetch the port/device GPF dvsecs. This is
currently only used for ports, but a later patch to export
dirty count to users will make use of the device one.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-2-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add support for GPF flows. It is found that the CXL specification
around this to be a bit too involved from the driver side. And while
this should really all handled by the hardware, this patch takes
things with a grain of salt.
Upon respective port enumeration, both phase timeouts are set to
a max of 20 seconds, which is the NMI watchdog default for lockup
detection. The premise is that the kernel does not have enough
information to set anything better than a max across the board
and hope devices finish their GPF flows within the platform energy
budget.
Timeout detection is based on dirty Shutdown semantics. The driver
will mark it as dirty, expecting that the device clear it upon a
successful GPF event. The admin may consult the device Health and
check the dirty shutdown counter to see if there was a problem
with data integrity.
[ davej: Explicitly set return to 0 in update_gpf_port_dvsec() ]
[ davej: Add spec reference for 'struct cxl_mbox_set_shutdown_state_in ]
[ davej: Fix 0-day reported issue ]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250124233533.910535-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfRN6sUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6vIQf/duM1njX3L5Vlxp7OStdQ5M09tCO4
maknuv2nUMBvM3rmzA8ZIIi/vJjEseah/EMVD+O0bZdJX0K9NwdE1I/jeXVzKCgN
ca6oB0OD58I/TxqOdSzdIQxh+rdbEe/XK4B9b20HpGj/xN347I4bLCR9SITAGOQx
DEJ70Dcrt430oYk7ag6FvskenkXV0JFhGY0hZ/LetFtnfcc5G9QG7jYW2Si+KEqF
MH4HV9u1s/Xng1Yb21ACbeh06Bdakuu/W9ZBGUwgkKRvLgDJdOYFds3xNuhuR8CI
LPbTkWoQqp0Oi9yV1UTxS2vMGfoyxSkQWLBSuPobTCDE3Qj7s1KSt7b92A==
=Exxa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DSmR
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.15:
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
* tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits)
arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block
arm64: dts: imx93: add ddr edac support
arm64: dts: imx95: add ref clock for pcie nodes
arm64: dts: mba8xx: Remove invalid property disable-gpio
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
arm64: dts: mba8mx: change sound card model name
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3
arm64: dts: imx95: Add imx95-15x15-evk support
arm64: dts: imx95: Add i3c1 and i3c2
arm64: dts: imx95: Add #io-channel-cells = <1> for adc node
arm64: dts: imx8mp-skov: support new 7" panel board
arm64: dts: imx8mp-skov: add revC BD500 board
arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers
arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI
arm64: dts: imx8mp-skov: add basic board as fallback
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
...
Link: https://lore.kernel.org/r/20250312074005.663165-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfREaAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4yRQf/evn2a+TJddNbG6SeuulRr07AtGhu
PnVnzRNnMrrGiYKoOXudulii7MWinVWElJJabboow5aEjNhN5K/V0WvXuIwDkOAq
U23i8udMtmdgjt4z4uw/vJb4QKS81YvShxHEf0l+7yoBCcvGFmuMkLF+Q17FmqUx
W6Q2a28AhLNm5o/WH3aA0EZNsiQ33rEyZsvzaMdx2btX1YaHVtBoDGXCsxQLzE/b
WChEdwt0ATrgqFN0gKgL1JU3FKa6alOcxVECjbCQzwPCSuV3ydNqeNCApHN5xVhZ
QtdcdwwLrFIbAyZ0yivamNaiwQR7WxCZ48WE7XYeCa+DkNmOs+8dblIGyw==
=n4I/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=26pZ
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This one is high priority: a user hit an assertion in the upgrade to
6.14, and we don't have a reproducer, so this changes the assertion to
an emergency read-only with more info so we can debug it.
-----BEGIN PGP SIGNATURE-----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=Ahlg
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-03-14' of git://evilpiepirate.org/bcachefs
Pull bcachefs hotfix from Kent Overstreet:
"This one is high priority: a user hit an assertion in the upgrade to
6.14, and we don't have a reproducer, so this changes the assertion to
an emergency read-only with more info so we can debug it"
* tag 'bcachefs-2025-03-14' of git://evilpiepirate.org/bcachefs:
bcachefs: Change btree wb assert to runtime error
Add to the ABI documentation the payload_max and label_storage_size
read-only files, which have been there since the early days.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250218224853.67457-3-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Trivially update where necessary.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250218224853.67457-2-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In a nvdimm interleave-set each device with an invalid or zero
serial number may cause pmem region initialization to fail, but in
cxl case such device could still set cookies of nd_interleave_set
and create a nvdimm pmem region.
This adds the validation of serial number in cxl pmem region creation.
The event of no serial number would cause to fail to set the cookie
and pmem region.
For cxl-test to work properly, always +1 on mock device's serial
number.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250219040029.515451-2-wangyuquan1236@phytium.com.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
gp_port is already pointed to the grandparent port during its definition,
remove a redundant code to let gp_port point to the grandparent port
again.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20250211062054.300108-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The next volatile and next persistent values are unused and are
cluttering the cxl_memdev_state.
Remove these values.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250206-cxl-cleanup-v1-1-9ddf26dd8433@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Some operations need to be protected by the cxl_region_rwsem in
construct_region(). Currently, construct_region() uses down_write() and
up_write() for the cxl_region_rwsem locking, so there is a goto pattern
after down_write() invoked to release cxl_region_rwsem.
construct region() can be optimized to remove the goto pattern. The
changes are creating a new function called __construct_region() which
will include all checking and operations protected by the
cxl_region_rwsem, and using guard(rwsem_write) to replace down_write()
and up_write() in __construct_region().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221013205.126419-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In cxl_dax_region_alloc(), there is a goto pattern to release the rwsem
cxl_region_rwsem when the function returns, the down_read() and up_read
can be replaced by a guard(rwsem_read) then the goto pattern can be
removed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-7-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In cxl_dpa_alloc(), some checking and operations need to be protected by
a rwsem called cxl_dpa_rwsem, so there is a goto pattern in
cxl_dpa_alloc() to release the rwsem. The goto pattern can be optimized
by using guard() to hold the rwsem.
Creating a new function called __cxl_dpa_alloc() to include all checking
and operations needed to be protected by cxl_dpa_rwsem. Using
guard(rwsem_write()) to hold cxl_dpa_rwsem at the beginning of the new
function.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-6-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_dpa_free() has a goto pattern to call up_write() for cxl_dpa_rwsem,
it can be removed by using a guard() to replace the down_write() and
up_write().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-5-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In cxl_memdev_ioctl(), the down_read(&cxl_memdev_rwsem) and
up_read(&cxl_memdev_rwsem) can be replaced by a
guard(rwsem_read)(&cxl_memdev_rwsem), it helps to remove the open-coded
up_read(&cxl_memdev_rwsem). Besides, the local var 'rc' can be also
removed to make the code more cleaner.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-4-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In cxl_mem_sanitize(), the down_read() and up_read() for
cxl_region_rwsem can be simply replaced by a guard(rwsem_read), and the
local variable 'rc' can be removed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-3-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Some down/up_read() and down/up_write() cases can be replaced by a
guard() simply to drop explicit unlock invoked. It helps to align coding
style with current CXL subsystem's.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250221012453.126366-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL drivers use kernel trace functions for logging endpoint and
Restricted CXL host (RCH) Downstream Port RAS errors. Similar functionality
is required for CXL Root Ports, CXL Downstream Switch Ports, and CXL
Upstream Switch Ports.
Introduce trace logging functions for both RAS correctable and
uncorrectable errors specific to CXL PCIe Ports. Use them to trace
FW-First Protocol errors.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250310223839.31342-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-----BEGIN PGP SIGNATURE-----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=MG/C
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250313' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
- Fix for a regression introduced in this cycle with error checking for
batched request completions (Shin'ichiro)
* tag 'block-6.14-20250313' of git://git.kernel.dk/linux:
block: change blk_mq_add_to_batch() third argument type to bool
nvme: move error logging from nvme_end_req() to __nvme_end_req()
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP